Making subscriptions and responses in FCSrv

I am having no luck performing what appears to be a very simple automation.
I have created a subscription that looks for a change in a custom metadata field I have created called "UBCSOJ Library Status" - when it is set to "Public" this should activate the response, copy the asset to the Library device, and create a new asset.
I've set up this subscription and response, and absolutely nothing happens. Here are some screen grabs:
I have also tried setting up other simple automations, such as an archive response where changing the status of an asset to completed moves the asset to the Archive device. Same thing, no action whatsoever. I must be doing (or not doing) something really obvious.
Hope someone can help!
Jon

Nothing! Well, it's reporting the fact that metadata has been updated for the asset in question, but no reference to a subscription being recognised or a response kicking in, or a copy being made.
I'm feeling pretty certain that somehow, in (perhaps clumsily) configuring custom metadata fields, groups and sets, I have managed to create some sort of conflict whereby the subscriptions and responses are not recognising these changes in status. I would really like to "reset" FCSrv if at all possible... is it possible?

Similar Messages

Clear explanation of Watchers, Subscriptions, and Responses

I'm looking for a clear description of Watchers, Subscriptions, and Responses, and how they interact.
And then, for example, let's say I wanted to generate an XML file for an asset when the status is set to "Rejected". And then pass back an XML request to update the metadata for that asset. I understand the WRITE XML and READ XML functions exist. I'm just not quite sure how to put it all together.
Thanks for any explanation and tips.

For your specific example:
Set up a response to Write XML to whatever device/location you want
Set up a metadata subscription on assets, with an event filter of modified and an asset filter of Status equals Rejected (with Trigger if Changed), that will execute the above response.

Adobe Captivate Help | What's new in Adobe Captivate 6 update (for subscription and Adobe Software Assurance customers)

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/whats-new-captivate-6-patch.html

Why on earth is this only for subscription and Adobe Software Assurance customers???
I own eLearning suite 6.1; why I'm not getting the Captivate update that is compatible with Windows 8 if my suite was released after Windows 8 release???

Where can I go to understand the subscription and ...

The policies are not clear, and I do not want to spend 3 hours reading.
I signed up in the US for Skype Premium.
I called 2 mobile phones (US) and my Skype credit (required for initial sign-up) was charged 7.2 cents for each call .... why?
The information about Skype premium says there are unlimited calls to mobile phones and land lines.
I am trying to buy an international subscription and cannot get the web site to process my order. In those cases where I can get the web site to process the subscription, Mastercard, VISA and Paypal are all blocked for Skype charges so it fails.
I am having no problems whatsoever with any other web site or services today.
This is not a warm welcome to Skype (and now I see the MS monster has consumed it).

You can set the layout.css.devPixelsPerPx pref on the about:config page to 1.0 or on Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx starting from 1.0 in 0.1 or 0.05 steps (1.1 or 0.9) to make icons show correctly.
*http://kb.mozillazine.org/about:config
See also:
*https://support.mozilla.org/kb/forum-response-Zoom-feature-on-Firefox-22
Use an extension to adjust the text size in the user interface and the page zoom in the browser window.
You can look at this extension to adjust the font size for the user interface.
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
You can look at the Default FullZoom Level or NoScript extension if web pages need to be adjusted after changing layout.css.devPixelsPerPx.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Is there a way to create a subscript and/or superscript in FRS?

Is there a way to create a subscript and/or superscript in FRS?

I've done some more searching and understand there are programs that extract the info out of an email. I believe they are called email parsers. Anyone have any more info on this? If so, any suggestions for a program that I could use? Thanks again.

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

A follow up question to Introducing Apple Recommends, Manage Subscriptions, and This Helped Me

In Introducing Apple Recommends, Manage Subscriptions, and This Helped Me it was written
Now anyone can click "This helped me" to say thanks to helpful members. When several people mark the same post, it will earn a gold star and appear at the top of the discussion, so it’s easier for others to find. The poster will also earn five reputation points for a job well done.
Does anyone know (or is it written anywhere) just how many is 'serveral'? Is it decided on the fly? Or does it depend on the phase of the moon?
Will the points be awarded to the poster only once, or if say 100 people mark it as helpful will more then 5 points be awarded?
Sounds like a really good system but it seems that a bit more thought should have gone into it, no? Or at least the explanation could be clearer.
Ciao.
(Another question) Can the original post (this one) get marked as helpful also? Imagine earning points for posting :-)

Howdy GeoCo et al
I sort of agree with this new "Helpie-ette" deal. I wonder why while at this portion of the UX they didn't address the ongoing issue of the "irrevocable nature " of the OP awards of the traditional Green Stamp and Gold Star - I have made the mistake (once) but I see the silliest things marked Solved frequently. THAT is bad for business in that it gives false visual info and false statistical results.
We'll see... BTW, the [People] TAB itself is the only new thing (the CONTROL in the TAB bar) - the URL has always been alive and well if one knew to add " /people "

How to put in subscript and superscript characters

Hi:
Does anyone know how to insert subscript and superscript
characters into Dreamweaver. I am doing a site for an
engineering/manufacturing firm and I am trying to create a
subscript 2 like one would see in H2O. The "2" should be small and
lower than the "H" and the "O". I've tried creating one in WORD and
cutting and pasting but that will not work and when I use the
2 code that does not seem ideal as it tends
to slightly push down the line below once the character is in and I
don't feel like changing the line spacing on the entire site. The
other thing I can't seem to do is make a tiny "Registered" ®
character. Simply cutting and pasting from WORD, the small
superscripted symbol gets made into a large ® once I paste it
in. Can anyone assist?

Add this to your CSS -
sub { position: relative; bottom: 0; left:.2ex; font-size:
80%;}
Then use the tag.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RockingChairman" <[email protected]> wrote
in message
news:g54kt1$jan$[email protected]..
> Hi:
> Does anyone know how to insert subscript and superscript
characters into
> Dreamweaver. I am doing a site for an
engineering/manufacturing firm and I
> am
> trying to create a subscript 2 like one would see in
H2O. The "2" should
> be
> small and lower than the "H" and the "O". I've tried
creating one in WORD
> and
> cutting and pasting but that will not work and when I
use the 2
> code
> that does not seem ideal as it tends to slightly push
down the line below
> once
> the character is in and I don't feel like changing the
line spacing on the
> entire site. The other thing I can't seem to do is make
a tiny
> "Registered" ®
> character. Simply cutting and pasting from WORD, the
small superscripted
> symbol
> gets made into a large ® once I paste it in. Can
anyone assist?
>

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

IIR Filtering and response .vi: Butterworth filter magnitude response depends on sampling rate -why?

Hi folks,
I am not expert in filter design, only someone applying them, so please can someone help me with an explanation?
I need to filter very low-frequent signals using a buttherwoth filter 2. or 3. order as bandpass 0.1 to 10 Hz .
Very relevant amplitudes are BELOW 1 Hz, often below 0.5 Hz but there will be as well relevant amplitudes above 5 Hz to be observed.
This is fixed and prescribed for the application.
However, the sampling rate of the measurement system is not prescribed. It may be between say between 30 and 2000 Hz. This will depend on whether the same data set is used for analysing higher frequencies up to 1000 Hz of the same measurement or this is not done by the user and he chooses a lower sampling rate to reduce the file sizes, especially when measuring for longer periods of several weeks.
To compare the 2nd and 3rd order's magnitude response of the filter I used the example IIR Filtering and response .vi:
I was very astonished when I the found that the magnitude response is significantly influenced by the SAMPLING RATE I tell the signal generator in this example vi.
Can you please tell me why - and especially why the 3rd order filter will be worse for the low frequency parts below 1 Hz of the signal. I was told by people experienced with filters that the 3rd oder will distort less the amplitudes which is not at all true for my relevant frequencies below 1 Hz.
In the attached png you see 4 screenshots for 2 or 3 order and sampling rate 300 or 1000 Hz to show you the varying magnitude responses without opening labview.
THANK YOU for your ANSWERS!!!
chris
Solved!
Go to Solution.
Attachments:
butterworth-filter-differences.png ‏285 KB

Hello Lynn,
thanks for the answer. You are right that there are few points "behind" the curve in the graph, see png.
However, this is the filter response which Labview (2009) provides to me directly out of the "IIR Filter for 1 Channel. vi" in the "filter information" output cluster. Where up to now I do not know how to influence it - apart from adjusting the input parameters "IIR filter specifications". OK, I assume I have to gain more knowledge of this. The curve of the magnitude resonse dies not change when I change the number of samples of the input signal of the signal generator, only wehn I change the sampling rate.
I used directly the example vi from Labview with the name indicated in my first post "IIR Filtering and Response.vi".
So I assumed that everybody has it in his/her examples shipped with LV and it is not necessary to post it.
I just adjusted the size of the diagram of magnitude response to see the curves better as you see in the attached vi.
So I did no changes to the vital parts of signal generation and filter of the example. The screenshots are like they come from the example when using the option "one waveform" where I as user assume that this which is behind is quality-controlled by NI.
I was also astonished that the filter magnitude response is different to the one I copied out of graphs 1 year ago - but I unfortunately cannot reconstruct which example I used there...
Thanks for any further comments
chris
Attachments:
IIR Filtering and Response_CH.vi ‏55 KB
butterworth2nd_order_bandpass_0p1to10Hz_mag_response.PNG ‏18 KB

Making button and a html site in visual studio community version

Hi,
I like to Making button and a html site in visual studio community version but i dont know how to put the right code in my c# form to perform a action to my new html site i made with visual studio.
So ik have a button and i added a html site with the "add" options to my form.I want the button to open onclick that site so i can make a html about some info of the button image (tool to use with metal)
Any one? Sorry i am very new at this and also from the netherlands but i want to coding in c# great to to learn..
Many thanks!
Arend

Hi Arend,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance
Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. Based on your issue, I think that the issue is more related to the programming. So I’m afraid that it is not the correct forum for this issue.
To help you find the correct forum for this issue, could you please tell
me which kind of app you want to create? Is it winform app or others?
If you want to code for a winform app using c# language, I suggest you
can consult your question on specific
WinForm forum so that they can share you something for you to start.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can i purchase more than one subscription and use ...

Hi,
I have bought a 60min/month subscription and realised that it is too little. I finish 60 minutes before the month is up and have nothing left. I am paying for it in 3-month cycles.
Can i buy another same subscription on top of this one so that i get a total of 120 mins a month?
When i try to do that, it says the new subscription will only activate after the current billing cycle is over. Does that mean that the new subscription will only start after 3 months is over? Then what is the point of getting multiple subscriptions if you need them immediately?
Please let me know how i can add more minutes apart from buying Skype credit.
thank you,
tabitha

Hi Tabitha,
If you want to have more minutes per month available, you need to buy a subscription with a different amount of minutes.
If you purchase the same amount of minutes, you will just extend your subscription for another months.
Here are your options: http://www.skype.com/intl/en/prices/pay-monthly/#SG
I hope it helps!
If my answer helped to fix your issue, mark it as a Solution to help others.
Thank You!
Please send private messages only upon request.

In sm_crm automatically populate service and response profiles based on support team

Hi All,
i have a requirement that in SM_CRM transaction while creating a incident user wants to automatically populate service and response profiles based on support team name.
i have checked for BADI's but dint find any which automatically populates service and response profiles at the time of creation of the ticket.
Kindly help!!

Hi Shaswat
This doesn't work as mentioned in the wiki page and SLA doesn't get determined by the org unit or support team via customizing.
We reported this to SAP and got a feedback that this is not supported and will be removed in future from the access sequence.
Therefore the only option is to implement badi i.e. crm_sladet_badi and use BADI determination in ur acess sequence to call this badi.
hope this clarifies
Thanks
Prakhar

Can't open Captivate 6.0 subscription and can't upgrade to Captivate 7.0

I just tried to open Captivate 6.0 and it is asking me to license the software, per usual. I'm on subscription. Normally clicking the License This Software button logs me in with my user account. Because of the upgrade to 7.0, it now stops at a page requiring a serial number.
I can't upgrade to 7.0 because I am on 10.6.8 (Mac) and that's as high as I can get on OS because of my MacBook version.
WTF Adobe??? I have a deadline of tomorrow and need to use your software -- which I have paid for!!!
Have been on hold waiting for Adobe Captivate product team for 55 minutes (and going) now.
You guys had better sort this out. This is ridiculous!
Also... backwards compatability is kind of essential. i.e., saving a Captivate file to a previous version so that co-worker, client, etc can open it if they have a previous version (even InDesign has this... not as easy as Photoshop or Illustrator, but you can still do it at least). Can you please make that a high priority??? Thank you.

Hi Deidre,
Sorry to hear about your problem.
I will make sure you recieve a call as soon as possible from Adobe to provide any possible help.
Please email thed etails of your Subscription and Machine as well as your Contact number to -- [email protected]
Thanks,
Anjaneai

Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
 <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
 <wsdl:operation name="Message">
 <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
 <wsdl:input>
 
 <wsp:Policy>
 <wsp:PolicyReference URI="policy:Sign.xml"/>
 <wsp:PolicyReference URI="policy:Encrypt.xml"/>
 </wsp:Policy>
 <soap:body use="literal" />
 </wsdl:input>
 <wsdl:output>
 <soap:body use="literal" />
 </wsdl:output>
 </wsdl:operation>
</wsdl:binding>
 Or

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
 <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
 <wsdl:operation name="Message">
 <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
 <wsdl:input>
 <soap:body use="literal" />
 </wsdl:input>
 <wsdl:output>
 
 <wsp:Policy>
 <wsp:PolicyReference URI="policy:Sign.xml"/>
 <wsp:PolicyReference URI="policy:Encrypt.xml"/>
 </wsp:Policy>
 <soap:body use="literal" />
 </wsdl:output>
 </wsdl:operation>
</wsdl:binding>
But not both

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
 <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
 <wsdl:operation name="Message">
 <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
 <wsdl:input>
 
 <wsp:Policy>
 <wsp:PolicyReference URI="policy:Sign.xml"/>
 <wsp:PolicyReference URI="policy:Encrypt.xml"/>
 </wsp:Policy>
 <soap:body use="literal" />
 </wsdl:input>
 <wsdl:output>
 
 <wsp:Policy>
 <wsp:PolicyReference URI="policy:Sign.xml"/>
 <wsp:PolicyReference URI="policy:Encrypt.xml"/>
 </wsp:Policy>
 <soap:body use="literal" />
 </wsdl:output>
 </wsdl:operation>
</wsdl:binding>
... Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
 Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
 <con:errorCode>BEA-386201</con:errorCode>
 <con:reason>
 A web service security fault
 occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
 to get token for tokenType:
 http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
 </con:reason>
 <con:details>
 <err:WebServiceSecurityFault
 xmlns:err="http://www.bea.com/wli/sb/errors">
 <err:faultcode
 xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
 soapenv:Server
 </err:faultcode>
 <err:faultstring>
 Failed to get token for tokenType:
 http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
 </err:faultstring>
 </err:WebServiceSecurityFault>
 </con:details>
 <con:location>
 <con:path>response-pipeline</con:path>
 </con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
Sam

Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

Making subscriptions and responses in FCSrv

Similar Messages

Maybe you are looking for