Making the CD from .ISO File

I downloaded Solaris 10 from the sun site. I extracted the ZIP File and got the .ISO Files.
I successfully burned the CDs for CD 2,3 & 4 but while I m burning the CD 1, my sonic CD Write is trhowing erro "CD is not compatible with source" , I again downloded the CD 1 considring that there was error in downloading earlier. I tried many time but result is same. Can someone help me?

If you have OS X on a .iso disc image, then you have an illegal copy of OS X. The Discussions is an Apple provided help system. We cannot help you with illegally obtained software.

Similar Messages

Burning the CDs from ISO files - Solution

I have just finished burning the cd images and as I type this my little baby is coming to life! he he :-)
I did try Nero but failed misrably so I offer the following as a solution that worked for me. Apologies to anyone if it appears I'm teaching 'Grandma to suck eggs'.
First you extract the files from the zips, uncorrupted zips that is, if you are using Winzip then the contents description etc will be displayed when you hover over the zip file with the mouse pointer.
Next add the .iso file extension to each of the 3 files you have just extracted
Next you need to create a Cue sheet/file. To do this go into notepad and create 1 file as shown below and save if with .cue file extension with the respective iso file.
FILE "C:\YOURDIR\sol-8-4_01-fcs-bin-ia-v1.ISO" BINARY
TRACK 01 MODE1/2048
INDEX 01 00:00:00
POSTGAP 00:02:00
Where YOURDIR corresponds to where you have the iso file stored.
You need to create 1 cue sheet file for each of the binaries with the .iso extension changing the references shown above to match the location and the .iso filename.
I then used cdrwin to write the file images loading each of the above cue sheets. But you could use any burning software that supports cue sheets, which give it the correct information to burn the image.
Hope this helps
Skaven

I tried the skaven_1 recommendations using the latest (v5.5.9.9) version of Nero. This version of Nero supports .iso extensions. It also supports .cue files. skaven_1's sample cue sheet works in Nero.
Despite all this the resulting CDs are unreadable on my Ultra10. All of the Solaris 9 CDs I have burned are readable on my PC.
I have burned other OS ISO images (BSD, OpenBSD, etc...) using the same version of Nero and they are all bootable on x86 machines.
I have found that if the CD is not readable using:
dd if=/dev/rdsk/c0t2d0s2 bs=2048 | od -Ax -xc | less
(BTW, this is a handy way to check the volume label at 0x8000 for the disk type)
it is unlikely to be readable (and therefore bootable) at the PROM level.
All of the other OS ISO images I have burned have been readable on the Ultra10 using the above command. NONE of the Solaris 9 images I have burned have been readable using the above command. The drive will "spin" and "click" indefinitely until interrupted (^C or kill).
Having scoured this archive, I have determined that some people are successful in burning the Solaris [89] images while many others are not. There seems to be no clear understanding on what is necessary for success.
Has anyone successfully burned Solaris 9 SPARC iso images to a CD. If so what specifically did you do to achieve this incredible success!? Detailed information on:
- version
- media
- technique
- phase of the moon :-}
would be most helpful to the rest of the community.
It would be nice if someone at Sun would chime in and provide this information. The information provided at the download area is less than informative. I have followed those instructions and still have not met with success.
Sun...ARE YOU LISTENING? If people have difficulty with obtaining and successfully using these OSes, it makes it harder for startups (like I am working with) to lay the foudation to use your hardware. If this is hard, we are likely to make decisions to use other solutions. Much as we may not wish to do this, it is the reality. We have solutions to provide in a limited amout of time.

Deleting the data from logical file/unix file

Hi all.
I need to delete the all the data from logical file (application server file/unix file).But I dont want to delete the logical file ( only data in the logical file should be deleted, i.e making file empty)
Thanks in advance.
Cheers.
sami

Hi Sami,
Refer thsi document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4d7aeb7d-0c01-0010-fa8a-a4a8e8968a93.
Regards,
Flavya

Disk Utility Unable to Correctly Burn Bootable Discs From ISO Files with Yosemite (10.10.1)

My problem is with burning ISO images to make a bootable DVD disc with OSX 10.10.1. I cannot drag and drop an ISO file (in this case, Ubuntu 14.04 server iso) to the disk utility and then burn it with Yosemite. I have to first open the ISO file, then attempt to burn it. The DVD it creates is unreadable. I tried to convert the ISO file to CDR and also IMG - same problem: disc unreadable error.
I then went back to OSX 10.9.5 and tried the same thing - worked like a champ. I was able to drag and drop the ISO file into the Disk Utility window and successfully burn a bootable DVD disc from the same Ubuntu ISO file I tried using with 10.10.1.
Hey Apple, what's up? You broke Disk Utility in 10.10.1. Has anyone experienced the same problem and found a work-around? I hate to have to keep booting an older version of OSX to accomplish this task. So far, Yosemite has been a bust for me with all the other problems I have experienced. I might as well go back to 10.9.5 on all my Macs until Apple gets their act together with Yosemite.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

How to transfer the tables from one file group to another file group in SQL 2008.?

Hello all,
I have few issues regarding the transfer of the tables from one file group to another file group  in SQL 2008 and also How can we  backup
and restore the particular database based on file group level.
Let’s say I have a tables stored within the different FG. such as
Tables
  File group
Dimension tables
Primary
Fact tables
  FG1
FG2…
zzz_tables
  DEFAULT_FG
dim.table1                                                                                                                          DEFAULT_FG
dim.table2                                                                                                                          DEFAULT_FG
Here all I want to transfer the dim.table1 ,dim.table2  from  DEFAULT_FG to the Primary File
group .So is there simple methods for transfer the dim.table1,2  from one FG to another .I have tried somewhat but I couldn’t get the exact way .So if someone have better idea please share your knowledge that would be really appreciated.
Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing  the Primary and FG1,FG2… not
a DEFAULT_FG.Is it possible or not.?
Hope to hear from the one who knows better approach for this kind of task .Your simple help will be much appreciated.
Regards,
Anil Maharjan

Well after all my full day research on this topic had paid off, I finally got the solution and am so happy to research on these things. It makes
us feel really happy after all our research and hard work doesn't goes as waste.
Finally I got what I am looking for and want to make sure that I am able to transfer the tables from DEFAULT_FG to another FG without tables
having clustered index on that tables .
With the help of the link below I finally got my solution where Roberto’s coded store procedure simply works for this.
Really thanks to him for his great post and thanks to all for your response and your valuable time.
http://gallery.technet.microsoft.com/scriptcenter/c1da9334-2885-468c-a374-775da60f256f
Regards,
Anil Maharjan

Reading the data from excel file which is in application server.

Hi,
Iam trying to read the data from excel file which is in application server.
I tried using the function module ALSM_EXCEL_TO_INTERNAL_TABLE. But it didn't work.
I tried just reading using open data set and read data set it is giving junk characters.
Please suggest me if you have any solution.
Best Regards,
Brahma Reddy

Hi Narendra,
Please see the below code I have written
OPEN DATASET pa_sfile for INPUT in text mode ENCODING DEFAULT MESSAGE wf_mess.
CHECK sy-subrc = 0.
DO.
READ DATASET pa_sfile INTO wf_string.
IF sy-subrc <> 0.
EXIT.
else.
split wf_string at wl_# into wf_field1 wf_field2 wa_upload-field3
wa_upload-field4 wa_upload-field5 wa_upload-field6 wa_upload-field7 wa_upload-field8
wa_upload-field9 wa_upload-field10 wa_upload-field11 wa_upload-field12 wa_upload-field13
wa_upload-field14 wa_upload-field15 wa_upload-field16 wa_upload-field17 wa_upload-field18
wa_upload-field19 wa_upload-field20 wa_upload-field21 wa_upload-field22 wa_upload-field23
wa_upload-field24 wa_upload-field25 wa_upload-field26 wa_upload-field27 wa_upload-field28
wa_upload-field29 wa_upload-field30 wa_upload-field31 wa_upload-field32 wa_upload-field33
wa_upload-field34 wa_upload-field35 wa_upload-field36 .
wa_upload-field1 = wf_field1.
wa_upload-field2 = wf_field2.
append wa_upload to int_upload.
clear wa_upload.
ENDIF.
ENDDO.
CLOSE DATASET pa_sfile.
Please note Iam using ECC5.0 and it is not allowing me to declare wl_# as x as in your code.
Also if Iam using text mode I should use extension encoding etc.( Where as not in your case).
Please suggest me any other way.
Thanks for your help,
Brahma Reddy

How to display the content from a file stored in database

when i am trying to display the content from a file which stored in database on oracle report 10g
data are displaying as following. please help me to display the data in readable format
<HTML LANG="en-US" DIR="LTR">

<HEAD>

<TITLE>Product Overview (ORACLE MARKETING)</TITLE>
<LINK REL="stylesheet" HREF="../fnd/iHelp.css">
</HEAD>
<BODY BGCOLOR="#F8F8F8">
<A NAME="T304286"></A><A NAME="ProdOve"></A>
<CENTER><H2>Product Overview</H2></CENTER>
Oracle Marketing drives profit, not just responses, by intelligently marketing to the total customer/prospect base. By leveraging a single repository of customer information, you can better target and personalize your campaigns, and refine them in real time with powerful analytical tools.
With tools necessary to automate the planning, budgeting, execution, and tracking of your marketing initiatives, Oracle Marketing provides you with:
<ul>
<li>
Customer Insight - With sophisticated customer management and list generation, Oracle Marketing enables you to quickly generate target lists and segments using an intuitive user interface. The easy to use Natural Query Language Builder (NLQB) lets you query for customers or prospects using a natural language while hiding data complexity; fatigue management ensures that you do not over-contact the same customers with marketing messages; and predictive analytics helps you predict customer behavior that you can leverage to produce significant increases in marketing return on investments (ROI).
</li>
<li>
ls.
With tools necessary to automate the planning, budgeting, execution, and tracking of your marketing initiatives, Oracle Marketing provides you with:
<ul>
<li>
Customer Insight - With sophisticated customer management and list generation, Oracle Marketing enables you to quickly generate target lists and segments using an intuitive user interface. The easy to use Natural Query Language Builder (NLQB) lets you query for customers or prospects using a natural language while hiding data complexity; fatigue management ensures that you do not over-contact the same customers with marketing messages; and predictive analytics helps you predict customer behavior that you can leverage to produce significant increases in marketing return on investments (ROI).
</li>
<li>
Sales Alignment - Oracle Marketing's leads management helps you compile and distribute viable leads so that sales professionals can follow up valuable opportunities and not just contact interactions. Additionally, support for distributing proposals and marketing material drive speedy and consistent setups and collaboration of best practices.
</li>
<li>
Marketing Insight - While Oracle Marketing Home page reports and Daily Business Intelligence (DBI) for Marketing and Sales provide aggregated management level information in almost real time, operational metrics help in tracking the effectiveness of individual marketing activities.
</li></ul>
</BODY>
</HTML>


Hi,
you can try to use the:
ConsumerTreeListPreview
layout for KM navigation ivew (or customize to your own).
This layout shows a folder tree on the left, a document list on the right. When you click on a document from the list it shows the contents of the file on the bottom of the iview.
Hope this helps,
Romano

How to read the data from a file in another computer with user name and password login

How to read read the data from a file in anohter computer which need to login with user name and password?

duplicate post: http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2061478
duplicate post: http://forums.ni.com/t5/LabVIEW/do-need-to-enter-the-user-name-and-password-when-TCP-ip/m-p/2061612
duplicate post http://forums.ni.com/t5/LabVIEW/log-on-the-other-computer-with-user-name-and-password/m-p/2060682

Use LINQ to extract the data from a file...

Hi,
I have created a Subprocedure CreateEventList
which populates an EventsComboBox
with a current day's events (if any).
I need to store the events in a generic List communityEvents
which is a collection of
communityEvent
objects. This List needs to be created and assigned to the instance variable
communityEvents.
This method should call helper method ExtractData
which will use LINQ to extract the data from my file.
The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
This method should clear all data from List communityEvents.
A LINQ
query that creates CommunityEvent
objects should select the events scheduled for selected
day from the file. The selected events should be added to List
communityEvents.
See code below.
Thanks,
public class CommunityEvent
private int day;
public int Day
get
return day;
set
day = value;
private string time;
public string Time
get
return time;
set
time = value;
private decimal price;
public decimal Price
get
return price;
set
price = value;
private string name;
public string Name
get
return name;
set
name = value;
private string description;
public string Description
get
return description;
set
description = value;
private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
if (eventComboBox.SelectedIndex == 0)
descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
if (eventComboBox.SelectedIndex == 1)
descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
if (eventComboBox.SelectedIndex == 2)
descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
if (eventComboBox.SelectedIndex == 3)
descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
if (eventComboBox.SelectedIndex == 4)
descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
if (eventComboBox.SelectedIndex == 5)
descriptionTextBox.Text = "No Events today.";

Any help here would be great.
Look, you have to make the file a XML file type -- Somefilename.xml.
http://www.xmlfiles.com/xml/xml_intro.asp
You can use NotePad XML to make the XML and save the text file.
http://support.microsoft.com/kb/296560
Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
You can do a (select new CommunityEvent) just like the example is doing a
select new FileToWatch and load the XML data into the CommunityEvent properties.
So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some flat text file you created. There are plenty of examples out on Bing and Google
on how to use Linq-2-XML.
http://en.wikipedia.org/wiki/Language_Integrated_Query
<copied>
LINQ extends the language by the addition of query
expressions, which are akin to
SQL statements, and can be used to conveniently extract and process data from
arrays, enumerable
classes, XML documents,
relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers[2]
or
monadic parsers.[3]
<end>

How to Load the data from excel file(Extension is .CSV) into the temp.table

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Hello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
 v_full_filename varchar2(500);
 v_server_path varchar2(2000);
 v_separator VARCHAR2(1);
 v_filename VARCHAR2(400);
 filename VARCHAR2 (100);
 v_stop_load varchar2 (2000);
 v_rec_error_log varchar2(4000);
 v_error_log varchar2(4000);
 ctr NUMBER (12);
 cols NUMBER (2);
 btn number;
 RES BOOLEAN;
 application ole2.obj_type;
 workbooks ole2.obj_type;
 workbook ole2.obj_type;
 worksheets ole2.obj_type;
 worksheet ole2.obj_type;
 cell ole2.obj_type;
 cellType ole2.OBJ_TYPE;
 args ole2.obj_type;
 PROCEDURE olearg
 IS
 args ole2.obj_type;
 BEGIN
 args := ole2.create_arglist;
 ole2.add_arg (args, ctr);
 ole2.add_arg (args, cols);
 cell := ole2.get_obj_property (worksheet, 'Cells', args);
 ole2.destroy_arglist (args);
 END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
 ,file_name => null
 ,file_filter => 'Excel files (*.xls)|*.xls|'
 ||'Excel files (*.xlsx)|*.xlsx|'
 ,message => 'Choose Excel file'
 ,dialog_type => null
 ,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
 filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
 application := ole2.create_obj ('Excel.Application');
 ole2.set_property (application, 'Visible', 'false');
 workbooks := ole2.get_obj_property (application, 'Workbooks');
 args := ole2.create_arglist;
 ole2.add_arg (args, filename); -- file path and name
 workbook := ole2.get_obj_property(workbooks,'Open',args);
 ole2.destroy_arglist (args);
 args := ole2.create_arglist;
 ole2.add_arg (args, 'Sheet1');
 worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
 ole2.destroy_arglist (args);
 ctr := 2; --row number
 cols := 1; -- column number
 go_block('xxx');
 FIRST_RECORD;
 LOOP
 --Column 1 VALUE --------------------------------------------------------------------
 olearg;
 v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
 :item1 := v_stop_load;
 cols := cols + 1;
 --Column 2 VALUE --------------------------------------------------------------------
 olearg;
 :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
 cols := cols + 1;
 --<and so on>
 ole2.invoke (application, 'Quit');
 ole2.RELEASE_OBJ (cell);
 ole2.RELEASE_OBJ (worksheet);
 ole2.RELEASE_OBJ (worksheets);
 ole2.RELEASE_OBJ (workbook);
 ole2.RELEASE_OBJ (workbooks);
 ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

Making the CD from .ISO File

Similar Messages

Maybe you are looking for