Making the first user to login the server?

Okay I know the subject is hard to understand, but is it possible with a chat applet class to be able to make the first person to login automatically the server? Just so that we don't have to worry about hosting a server, instead the server will just be the first one to login to the chat page.

5. what happens to the chat when the first user
leaves?
Good question. I thought that I would make it
immediately chose another user to be the new server.
Is that possible?I did something more-or-less exactly what you're after, some years ago (don't ask for the source, I haven't got it any more) it wasn't an applet, though, and not intended for use outside a private LAN so might not be suitable. I used UDP multicasting to keep track of which client was "the server", and additionally, there was a token passed around the network that meant each client took turns being the server for a while - load-balancing, if you like, my intention was to keep our systems support guys guessing where the traffic was coming from :-)
what you're proposing is possible, but if you're planning on 1) making it an applet and 2) doing this over the internet, you'll hit problems
UDP multicasting over the public internet is somewhat more complex, since there's nothing to stop other people using your multicast channel

Similar Messages

  • OS X Server 10.6.4 - newly created user cannot login to server

    As title.
    Just turn on the mac mini server (mid-2010) and do some initial setup. It can access the internet. However, all users that I have created cannot log into the server! Only the one (admin account) that created during the 1st time server setup can login to the server. Anyone know why and what I have not setup properly?
    New user during login take a while and no error message popup. The login window just acts like it can login but within a second, the login window "shaking" and prompt for me to login again. Watch below youtube video for more detail.
    http://www.youtube.com/watch?v=K7wV3rVJK9c
    Here are some information hope can help...
    1. My mac mini server connect behind a router.
    2. No special setting for the DNS / Open directory. Just use the system default.
    3. When open "Server Admin", it shown "mac.local" at the upper left hand side.
    Message was edited by: rayzine2

    rayzine2
    After the Server Setup Assistant has finished and by default the Service Access Control Lists (SACLs) denies access to everyone apart from the default admin account. It does this when SSH is enabled. It's one of the options at the bottom of the dialog box you used to create the default administrator account. To turn this off launch Server Admin, select the Server name in the sidebar > Access.
    You should be configuring client workstations to allow network users to log in to rather than the server. Read the documentation:
    http://support.apple.com/manuals/#serversandenterprisesoftware
    Tony

  • Mail users no login with Mail or webmail

    MacMini Server 10.6.4. Users can login to server via vpn and connect ok. Mail Server was working fine then just stopped. However send and receive IMAP emails not working. Mail Log for smtp 'postfix/smtpd[2065]: error: Unable to lookup user record. Mail Log for 'Mail Access' - Dovecot show various entries like 'no record for user' and and lookup failed for user: username'. I have checked DNS and it looks fine with hostname check and fwd and reverse lookups good.
    Also another error in Mail Access - dovecot[217]:auth(default): gssapi(?192.168.x.x): While processing incoming data: A required input could not be read.
    When accessing IMAP the following appears - Aug 24 17:35:32 crudeserver push_notify[84]: error: <iq id='10049' to='[email protected]/push_notify' type='error' from='pubsub.crudeserver.crudelubricants.com' xmlns='jabber:client'><pubsub xmlns='http://jabber.org/protocol/pubsub'><publish node='/Public/IMAP/crudeserver.crudelubricants.com/portnum/Mailbox/FA3FBFCD-6DB C-4848-9DB4-C38AB1A6F738'><item><plistfrag xmlns='plist-apple'/></item></publish></pubsub><error type='cancel' code='404'><remote-server-not-found xmlns='urn:ietf:params:xml:ns:xmpp-stanzas'/></error></iq>
    As I said evrything else on the server appears to be ok except that even though I can login via vpn a couple of time now I have gone to login and none of the sharepoints appear at all. ie it is completely blank. After restarting the server the sharepoints reappear.
    Can anybody provide ideas please asap as it effecting my clients emails.

    I think it might have to do with the ISP. I will research this before wasting your time.

  • How do I get connected to a server on my network via an IP address?  When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

    I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path?  When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

    Some of the following is going to use some technical terms — this area is inherently somewhat technical. 
    If you don't understand some part of the following reply, please ask.
    Is this your own OS X Server system on your own network, or is this some other server within some larger organization? 
    You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
    If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured.   This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
    If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
    The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
    http://10.20.30.40
    UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share.  That's used if you're connecting to an Apple storage service somewhere on your network.  You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server.  (There can be additional requirements for connecting to Windows Server systems, too.)
    If there's local IT staff available here, please contact them for assistance.  If these are your own local systems and your own local OS X Server system, then some information on the server will be needed.  (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

  • User locks out, due to 5 invalid login attempts after the server running

    Hi ,
    I HAC on WLS 10.3.2 (Oracle Solaris on x86-64 (64-bit)).
    user locks out, due to 5 invalid login attempts just after the server comes into running state.
    But the strange thing is Customer is not trying to login into it.
    we unlocked the user, after logging into the console with a different user.
    Customer knows the username and password
    Still the issue appears after few minutes.
    Below are the logs:
    ####&lt;Oct 5, 2010 2:41:36 PM SGT&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000005&gt; &lt;1286260896734&gt; &lt;BEA-000329&gt; &lt;Started WebLogic Admin Server "AdminServer" for domain "IDMDomain" running in Production Mode&gt;
    ####&lt;Oct 5, 2010 2:41:36 PM SGT&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;main&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000003&gt; &lt;1286260896843&gt; &lt;BEA-000365&gt; &lt;Server state changed to RUNNING&gt;
    ####&lt;Oct 5, 2010 2:41:36 PM SGT&gt; &lt;Notice&gt; &lt;WebLogicServer&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;main&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000003&gt; &lt;1286260896846&gt; &lt;BEA-000360&gt; &lt;Server started in RUNNING mode&gt;
    ####&lt;Oct 5, 2010 2:41:36 PM SGT&gt; &lt;Info&gt; &lt;J2EE&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000006&gt; &lt;1286260896848&gt; &lt;BEA-160151&gt; &lt;Registered library Extension-Name: bea_wls_async_response (JAR).&gt;
    ####&lt;Oct 5, 2010 2:41:37 PM SGT&gt; &lt;Info&gt; &lt;EJB&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000006&gt; &lt;1286260897879&gt; &lt;BEA-010008&gt; &lt;EJB Deploying file: mejb.jar&gt;
    ####&lt;Oct 5, 2010 2:41:39 PM SGT&gt; &lt;Info&gt; &lt;EJB&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000006&gt; &lt;1286260899932&gt; &lt;BEA-010009&gt; &lt;EJB Deployed EJB with JNDI name ejb.mgmt.MEJB.&gt;
    ####&lt;Oct 5, 2010 2:42:35 PM SGT&gt; &lt;Info&gt; &lt;Health&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;weblogic.GCMonitor&gt; &lt;&lt;anonymous&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000000c&gt; &lt;1286260955961&gt; &lt;BEA-310002&gt; &lt;50% of the total memory in the server is free&gt;
    ####&lt;Oct 5, 2010 2:43:35 PM SGT&gt; &lt;Info&gt; &lt;Health&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;weblogic.GCMonitor&gt; &lt;&lt;anonymous&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000000c&gt; &lt;1286261015987&gt; &lt;BEA-310002&gt; &lt;71% of the total memory in the server is free&gt;
    ####&lt;Oct 5, 2010 2:46:09 PM SGT&gt; &lt;Notice&gt; &lt;Security&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000001b&gt; &lt;1286261169575&gt; &lt;BEA-090078&gt; &lt;User weblogic in security realm myrealm has had 5 invalid login attempts, locking account for 30 minutes.&gt;
    ####&lt;Oct 5, 2010 2:46:24 PM SGT&gt; &lt;Info&gt; &lt;Server&gt; &lt;STG-DS11&gt; &lt;AdminServer&gt; &lt;[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'&gt; &lt;&lt;WLS Kernel&gt;&gt; &lt;&gt; &lt;21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000001d&gt; &lt;1286261184189&gt; &lt;BEA-002635&gt; &lt;The server "wls_ods1" connected to this server.&gt;
    Thanks,
    Daniel

    User weblogic in security realm myrealm has had 5 invalid login attempts, locking account for 30 minutes.The customer knows the weblogic password?

  • Messaging Server 4: WebMail login returns "unable to locate the server"

    When I log into WebMail, the following error occurs:<BR>
    <P>
    Netscape is unable to locate the server <I>hostname</I>.
    Please check the server name and try again.
    <P>
    <B>End User</B>
    <P>
    First verify that you cannot reach the hostname
    server by using the ping
    utility (Windows NT or Unix). If
    you cannot reach the host, report this problem to the appropriate system
    administrator or help desk.
    <P>
    However, if you can reach the host with ping
    , then the problem may be a minor
    networking issue that you can resolve. There is also the possibility that
    the network has been configured to allow users to ping
    unreachable systems. You can use the
    following actions to rule out possible sources of the problem:<BR>
    <P>
    <OL>
    <LI>Attempt to log in to WebMail again. If you can log in successfully, then
    the problem with the WebMail server may have been temporary or is an
    intermittent problem.
    <P>
    <LI>End the current browser session and then restart the browser and try to
    connect to the WebMail server again. If you can log in successfully, then,
    most likely, the browser had cached some old network information that was
    reset when you exited the browser.
    <P>
    <LI>Verify the DNS configuration of your system and then restart the entire
    system.
    </OL>
    <P>
    If the above actions do not work, then you will need to contact the
    system administrator or the help desk.
    <P>
    <B>Mail Server Administrators</B>
    <P>
    As the problem with connecting to the WebMail server is caused by configuration
    or availability problems, make sure that users who report this problem have
    HTTP network connectivity to the hostname. The following scenarios are
    possible causes of connectivity problems:<BR>
    <P>
    <UL>
    <LI>Users have the wrong proxy.
    <LI>Users are being blocked by firewalls.
    <LI>Users are connecting from the wrong network.
    <LI>Users specify the incorrect DNS servers.
    </UL>
    <P>
    In addition, users may also report that the server is down. As the login page
    for WebMail does not contain URL links that are FQDNs or absolute path names,
    it is possible that users may still be able to see the login window if it was
    cached or loaded before the server stopped working.
    <P>
    In some cases, it may be necessary to access the hostname that is used in the
    WebMail links. This hostname setting is stored in the configdb
    parameter
    service.smtp.messagehostname.
    This configuration setting is not mentioned in the Messaging Server
    documentation.
    <P>
    The messagehostname is a
    configuration value that affects many server functions. For this reason, do
    not make changes to this value without first considering the effects of such a
    change on other WebMail settings, such as the postmaster group and user
    mailhost values. Also, please note that changing messagehostname
    is not supported from Console.
    <P>
    For more information on messagehostname
    , please see "What is messagehostname?"
    at<BR>
    article 4250
    <P>
    You can also find documentation for configutil
    in the Messaging Server Administrator's
    Guide at the following URL:<BR>
    <P>
    http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887
    <P>
    <B>Note:</B> You must stop and restart the HTTP service in order for changes to
    the messagehostname to
    take effect.

    When I log into WebMail, the following error occurs:<BR>
    <P>
    Netscape is unable to locate the server <I>hostname</I>.
    Please check the server name and try again.
    <P>
    <B>End User</B>
    <P>
    First verify that you cannot reach the hostname
    server by using the ping
    utility (Windows NT or Unix). If
    you cannot reach the host, report this problem to the appropriate system
    administrator or help desk.
    <P>
    However, if you can reach the host with ping
    , then the problem may be a minor
    networking issue that you can resolve. There is also the possibility that
    the network has been configured to allow users to ping
    unreachable systems. You can use the
    following actions to rule out possible sources of the problem:<BR>
    <P>
    <OL>
    <LI>Attempt to log in to WebMail again. If you can log in successfully, then
    the problem with the WebMail server may have been temporary or is an
    intermittent problem.
    <P>
    <LI>End the current browser session and then restart the browser and try to
    connect to the WebMail server again. If you can log in successfully, then,
    most likely, the browser had cached some old network information that was
    reset when you exited the browser.
    <P>
    <LI>Verify the DNS configuration of your system and then restart the entire
    system.
    </OL>
    <P>
    If the above actions do not work, then you will need to contact the
    system administrator or the help desk.
    <P>
    <B>Mail Server Administrators</B>
    <P>
    As the problem with connecting to the WebMail server is caused by configuration
    or availability problems, make sure that users who report this problem have
    HTTP network connectivity to the hostname. The following scenarios are
    possible causes of connectivity problems:<BR>
    <P>
    <UL>
    <LI>Users have the wrong proxy.
    <LI>Users are being blocked by firewalls.
    <LI>Users are connecting from the wrong network.
    <LI>Users specify the incorrect DNS servers.
    </UL>
    <P>
    In addition, users may also report that the server is down. As the login page
    for WebMail does not contain URL links that are FQDNs or absolute path names,
    it is possible that users may still be able to see the login window if it was
    cached or loaded before the server stopped working.
    <P>
    In some cases, it may be necessary to access the hostname that is used in the
    WebMail links. This hostname setting is stored in the configdb
    parameter
    service.smtp.messagehostname.
    This configuration setting is not mentioned in the Messaging Server
    documentation.
    <P>
    The messagehostname is a
    configuration value that affects many server functions. For this reason, do
    not make changes to this value without first considering the effects of such a
    change on other WebMail settings, such as the postmaster group and user
    mailhost values. Also, please note that changing messagehostname
    is not supported from Console.
    <P>
    For more information on messagehostname
    , please see "What is messagehostname?"
    at<BR>
    article 4250
    <P>
    You can also find documentation for configutil
    in the Messaging Server Administrator's
    Guide at the following URL:<BR>
    <P>
    http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/cmdline.htm#1003887
    <P>
    <B>Note:</B> You must stop and restart the HTTP service in order for changes to
    the messagehostname to
    take effect.

  • Folder Redirection policy is not applied to a user, when the server target is changed, but works after resetting the windows profile.

    Folder Redirection policy is not applied to a user, when the server target is changed. 
    After server target is changed via group policy, when user login  (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
    But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
    it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
    Many Thanks

    >   But when the specific users login they all get the same error, it
    Is the old server removed from the domain? Seems so - or some other
    authentication related issue, hard to tell from here...
    > seems that the roaming user profiles still keeps the old server details,
    Yes - if you change redirection targets, FR moves content from old to
    new, and only if this ends sucessfully, it will update the redirection
    target.
    Make the old redirection target accessible to the user and you'll be fine.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • How to get all users from the server....?

    Hi all,
    in my application i want to get all possible users present in the PORTAL-EP Server
    and set them into the drop down.
    is there need to login in the portal as a admin or other user to get the all users present in the Server.
    Regards,
    Deepak

    Hi! Deepak,
       you can use UME API to get all the users of EP in WebDynpro appl.
    Herewith i am giving you the UME API link --
    <a href="http://help.sap.com/javadocs/NW04/current/um/index.html">http://help.sap.com/javadocs/NW04/current/um/index.html</a>
    i am giving the code also to get all the users from LDAP.
       IPublic<ComponentName>.IUserIDElement userIDNodeElement = null;
    IUserAccountFactory accountFact = UMFactory.getUserAccountFactory();
    MessageManager msgMgr = (MessageManager)wdThis.wdGetAPI().getComponent().getMessageManager();
    try {     
    IUserAccountSearchFilter accountSearchFilter  =  accountFact.getUserAccountSearchFilter();
    accountSearchFilter.setLogonUid("*",ISearchAttribute.LIKE_OPERATOR,false);
    ISearchResult srchRslt = accountFact.search(accountSearchFilter);
       while(srchRslt.hasNext()) {                    
                    userIDNodeElement = wdContext.createUserIDElement();          String uniqueID = (String)srchRslt.next();
         IUserAccount userAccount = accountFact.getUserAccount(uniqueID);
         String LogonUid = userAccount.getLogonUid();
         userIDNodeElement.setCtx_UserID(LogonUid);
         wdContext.nodeUserID().addElement(userIDNodeElement);
        } catch(Exception exc) {
                  msgMgr.reportWarning(umException.toString());
    regards,
    Mithilehwar

  • Email gets queued, but not sent until I login to my account on the server.

    This is very strange. Let me explain.
    1. Snow Leopard Server 10.6.2 running on an iMac.
    2. I have the Mail Service running on the server. I can receive emails without problems.
    3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
    4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
    postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    postfix/qmgr\[65313]: 942814AD55B: removed
    postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: C611B4AD568: removed
    4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
    postfix/smtpd\[69030]: connect from \[External Host Address]
    postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
    postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
    postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
    4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
    postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
    postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
    postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
    postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
    postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
    postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
    postfix/qmgr\[65313]: B5F574AD582: removed
    postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
    postfix/qmgr\[65313]: 20B244AD5B0: removed
    I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
    Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
    Rob

    Looks to me like the anti-virus scanner, amavis. The clue is the line:
    postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
    where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
    My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

  • How can i get my macbook pro to automatically login and open the server

    I apologize if this question has been asked before.  I am new to MAC and know almost nothing about configuring them.
    I have a windows server 2003 that I am networked with.  When I boot my Macbook Pro I have to manually connect to the server.  How can I make my laptop do this automatically?

    Add it in the Users & Groups, Login Items area.

  • How can I set the default home page in Firefox 4 for all users that login to a PC on a Win 7 PC?

    I work at a community college in upstate NY.
    We use Firefox as the default browser at our institution and we have always set the default homepage to be our homepage for all users that login to the PC. We had a procedure to to that that worked with Windows XP and FF 3 or earlier
    We would do the following:
    1. go to: c:\Documents and Settings\Administrator\Application Data\Mozilla\FireFox\Profiles\<profile_name>\prefs.js
    2. Add the line: user_pref (“browser.startup.homepage”,”http://www.genesee.edu”);
    3. Copy the Folder
    C:\Documents & Settings\Administrator\Application Data\Mozilla
    To
    C:\Documents & Settings\Default User\Application Data\Mozilla
    4. Restart the computer
    We're going to Win 7 and Firefox 4 and things seem to be different in terms of files and file structure. Does anyone know how to accomplish this?
    Thanks in advance.

    Making customisation from the default profile is generally considered poor practice and quite often doesn't work out as planned. (If you're interested in some more information on this, [http://mockbox.net/windows-7/227-customise-windows-7-default-profile.html see here] see here)
    This article should help you with developing and deploying your customised Firefox 4 installation (without touching the Windows 7 default user profile):
    http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html

  • Parallel How many times user can login to the SAP system through ITS

    Hello all
    We are using the ITS ---620 and following 46D R/3 system 
    R/3 system details:
    Kernal :
    kernel release :46D
    O/S :SunOS 5.8 Generic_108528-05 sun4us
    We would like to now, At a time How many times user can login to the SAP system through ITS
    Kindly letus know  if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
    Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
    We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
    System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
    I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
    Thanks

    I have searched all docs and notes.
    Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
    The functionality does not exist for SAP Gui for HTML.
    Regards,

  • Is it possible to force the user to login again when using oauth 2 (implicit grant)

    Hi,
    I'm trying to build an application based on a rest webservice in APEX which is being accessed by a javascript frontend via ORDS. I'm using the "Implicit grant" flow of OAUTH 2.
    When the user is finished with the application, he/she should be able to logout of the application, so another user can login (on the same machine and browser). But, without clearing all cookies, ORDS will automatically give an access token for the previous user, without showing the login screen to allow/deby access to the rest web service.
    (Clearing the cookies is not possible via javascript, since they are httponly)
    I know it is not the "normal" way to use oauth2, but I would like to be able to log-out a user. So how can I force ORDS to show the loginscreen again to give another user the possibility to login?
    Alexander

    You can force the implicit code flow to prompt the user to sign in by including _auth_=force in the approval request query string. To follow the example shown in the developer guide [1]
    change:
    https://server:port/ords/resteasy/oauth2/auth?response_type=token&client_id=CLIENT_IDENTIFIER&state=STATE
    to:
    https://server:port/ords/resteasy/oauth2/auth?response_type=token&client_id=CLIENT_IDENTIFIER&state=STATE&_auth_=force
    [1]: REST Data Services Developers Guide

  • Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

    Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
    to svchost.exe and therefore is protected from being manually restarted.
    I noticed the following errors when this occurs:
    Log Name:      Application
    Source:        Application Error
    Date:          7/23/2013 4:35:26 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Server1.xxx.xxx.net
    Description:
    Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x46c
    Faulting application start time: 0x01ce877f9476ac07
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
        <EventRecordID>158950</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AAW19XM2.agency.nwie.net</Computer>
        <Security />
      </System>
      <EventData>
        <Data>svchost.exe</Data>
        <Data>6.1.7600.16385</Data>
        <Data>4a5bc3c1</Data>
        <Data>ntdll.dll</Data>
        <Data>6.1.7601.17725</Data>
        <Data>4ec4aa8e</Data>
        <Data>c0000024</Data>
        <Data>00000000000cd7d8</Data>
        <Data>46c</Data>
        <Data>01ce877f9476ac07</Data>
        <Data>C:\Windows\system32\svchost.exe</Data>
        <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
        <Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
      </EventData>
    </Event>
    All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
    about 5 months ago a similar error fired on a non-virtual machine:
    Log Name:      Application
    Source:        Application Error
    Date:          2/27/2013 6:57:58 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      AAW29033
    Description:
    Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x6c0
    Faulting application start time: 0x01ce14e1af313fd9
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
        <EventRecordID>286291</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AAW29033</Computer>
        <Security />
      </System>
      <EventData>
        <Data>svchost.exe_gpsvc</Data>
        <Data>6.1.7600.16385</Data>
        <Data>4a5bc3c1</Data>
        <Data>ntdll.dll</Data>
        <Data>6.1.7601.17725</Data>
        <Data>4ec4aa8e</Data>
        <Data>c0000024</Data>
        <Data>00000000000cd7d8</Data>
        <Data>6c0</Data>
        <Data>01ce14e1af313fd9</Data>
        <Data>C:\Windows\system32\svchost.exe</Data>
        <Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
        <Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
      </EventData>
    </Event>
    I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
    the Group Policy Client service to stop?

    You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
    I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
    When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
    however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
    I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
    If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
    **EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
    to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

  • Is it possible to downsize a large image on the server side (before serving it to the user)?

    One of the banes of my existence is resizing the same image several times because of the various contexts it appears in. For example, the main image in an article will appear bigger than it will on the index page, where many article teasers are placed. Then there's the image that goes in the Facebook "share" og. Then there's... you get the idea.
    Same image, different contexts, lots of Photoshop resizing, lots of files to keep track of... but I save on bandwidth.
    On the flip side, I can target the same (large) image and simply downsize via traditional HTML (width/height) on the browser end, but that will mean downloading a file that is 50-75% larger than what is actually needed. If the front page teaser displays a 1280px image at 500px, that's a huge (and potentially costly) waste of bandwidth.
    HOWEVER...
    If I could do the same thing on the SERVER side... in other words, tell the server to take only the pixels it needs from the (large) image and serve only THOSE to the end user... then the same image could be used in each and every context, and only the necessary bandwidth is used.
    Is this do-able? If so, what is the process formally called, and where would I begin to learn how to do it?
    Thanks!

    That's amazing. I didn't think it was possible without saving files on the server first.
    This will suit my needs just fine, but allow me to push my luck even further with the following "hail mary" question : would it be possible for the server to serve the PNG with a width of 100% of the container? In other words, the behavior would mimic width=100% but the server would still only serve as many bytes as are needed to fill that space.
    Not only would I not have to create separate files for every resize (we fixed that problem with your suggestion) but I wouldn't even have to customize every link to a specific size.
    I'm not expecting an affirmative on this one, but it was worth asking. =)

Maybe you are looking for

  • ACS 5.3 - How to copy DB to a new instance of ACS 5.3

    I need to copy an existing ACS 5.3 database to another instance of ACS 5.3 that I've deployed.  I can't set up a primary/secondary between these two and do the deed via replication.  So it's going to have to be a export/import or a backup/restore.  I

  • Desktop 5.6.2  w/ older versions on the server

    If clients are using various versions of XML Publisher, 5.0, 5.5, 5.6.1, or 5.6.2. Do I have to use the corresponding desktop utility to develop templates for those instances... Or is it just a matter of "dumb-ing" down your templates if the server i

  • RFC hangs with a call to function module SSFC_PARSE_CERTIFICATE

    Hello , We are working on BI 7.0  SP9 . When we try to test the RFC connection from the WAS Abap to the portal ( WAS JAVA ) using  SM59  , the test is hanging but we can read in the bottom of the screen 'Connexion bcv51sf2... OK' !!! The test connect

  • I can't boot panther install cd on my PowerBook G4

    I have the Mac OS X 10.3.0 Install CDs, and I am trying to install it on my PowerBook G4 5,6. My PowerBook G4 came with 10.6.7. I can't find the original discs. When I try to install Panther on my PowerBook G4 it shows the gray apple for a second the

  • SQL loader Field in data file exceeds maximum length for CLOB column

    Hi all I'm loading data from text file separated by TAB and i got the error below for some lines. Event the column is CLOB data type is there a limitation of the size of a CLOB data type. The error is: Record 74: Rejected - Error on table _TEMP, colu