Making the Gnome-Shell power manager and sound applet use stock icons

How might this be possible, I'd like to use the stock icons for these two, since every icon theme I seem to use makes the icon too tiny to even distinguish. I'd really like to just use the built-in ones, they look better anyway.

I've had this same issue. Its a shame there doesn't seem to be a single icon theme that works properly for gnome 3 besides the default. The only way I found was to go and delete all the offending icons from your icon theme and they will fallback to the gnome defaults. (yeah a pain in the ass)
Last edited by bwat47 (2011-07-03 04:21:09)

Similar Messages

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

ThinkVantage Access Connections, Power Manager, and Toolbox all crash on startup

I have a SL 500 with factory Vista , updated to SP2 and the current versions of the thinkvantage components.
Access Connections has always been very buggy of this machine (I guess the battery monitor has been as well), When I attempted to update them this is where I ended up.
Also just installed new .net framework 4 as well.
thanks for any help
ian
Description:
  Stopped working
Problem signature:
  Problem Event Name: CLR20r3
  Problem Signature 01: pcdrcui.exe
  Problem Signature 02: 6.0.5514.59
  Problem Signature 03: 4c0eb0cb
  Problem Signature 04: wpfview
  Problem Signature 05: 6.0.5514.59
  Problem Signature 06: 4c0eb0cb
  Problem Signature 07: f8
  Problem Signature 08: 9c
  Problem Signature 09: System.IO.FileNotFoundException
  OS Version: 6.0.6002.2.2.0.256.6
  Locale ID: 1033
Description:  Stopped working
Problem signature:  Problem Event Name: CLR20r3  Problem Signature 01: pcdrcui.exe  Problem Signature 02: 6.0.5514.59  Problem Signature 03: 4c0eb0cb  Problem Signature 04: wpfview  Problem Signature 05: 6.0.5514.59  Problem Signature 06: 4c0eb0cb  Problem Signature 07: f8  Problem Signature 08: 9c  Problem Signature 09: System.IO.FileNotFoundException  OS Version: 6.0.6002.2.2.0.256.6  Locale ID: 1033
Description:
  Stopped working
Problem signature:
  Problem Event Name: APPCRASH
  Application Name: PWMUI.EXE
  Application Version: 1.0.0.0
  Application Timestamp: 4bea35c2
  Fault Module Name: KERNEL32.dll
  Fault Module Version: 6.0.6002.18005
  Fault Module Timestamp: 49e037dd
  Exception Code: e0434f4d
  Exception Offset: 0003fbae
  OS Version: 6.0.6002.2.2.0.256.6
  Locale ID: 1033
Description:
  Stopped working
Problem signature:
  Problem Event Name: APPCRASH
  Application Name: Access Connections.exe
  Application Version: 5.3.0.0
  Application Timestamp: 4bcff8d0
  Fault Module Name: KERNEL32.dll
  Fault Module Version: 6.0.6002.18005
  Fault Module Timestamp: 49e037dd
  Exception Code: e0434f4d
  Exception Offset: 0003fbae
  OS Version: 6.0.6002.2.2.0.256.6
  Locale ID: 1033

Hi...
I too have got the same problem...
i dont know when it started as it was running fine....earlier..
In Access Connections the 'right click' menu on the taskbar runs just fine ..but the Access Connections program crashes on opening..
The wireless status also runs fine
Same is the case with Power Manager
Shows the right battery status and the right click menu runs fine..but the Power Manager application crashes
Like by the Lenovo toolbox too crashes
I am using Lenovo X100e with win 7 starter edition
i had .net framework 2 installed ...3.5 doesnt install and.net framework 4 installed after the problems started ...but still the problem hasnt stopped

[SOLVED] Kill the Gnome screen curtain once and for all

Author edit: you can see the fix that finally worked in post https://bbs.archlinux.org/viewtopic.php … 4#p1351594
I was inadvertently locked out of my own computer for about 10 minutes until I happened to stumble on the "Ctl + L" trick to bring up the login in screen. How can I remove or disable the gnome shell screen lock for good.
I already tried:
setting the "screen lock" to OFF under gnome setting > Privacy (gnome 3.10 appears to ignore this, or "screen lock" refers to something else)
the Disable Screen Shield extension - this has not been updated to gnome 3.10
Last edited by marko2010 (2013-11-19 18:04:06)

I think I finally found a way to disable the inactivity curtain in gnome 3.10. Launch dconf-editor then drill down org > gnome > desktop> session. Find the key for idle-delay and change it's value to 0 .
Or you can do it in once step by running the command:
gsettings set org.gnome.desktop.session idle-delay 0
Note you would think that going into the gnome control center and moving Privacy > Screen Lock to "OFF" would completely disable the screen curtain, but this never worked for me. The curtain would still come up after periods of inactivity, but would no longer ask for a password. Adding the fix above, completely gets rid of this pesky thing.

Power Manager and Access Connections crash, neither help nor solution from Lenovo!?!

Hello
I've already posted here on the forum several weeks ago about the obvious problem that Lenovo has with the latest version of the Power Manager and the Access Connections which both crash either on startup or while tryibg to open it.
So far there has been neither an update, nor a solution nor an official statement from Lenovo about that problem that consists rightnow for over two month!
When searching the forum I see the same all over again: Unanswered threads, solutions that don't solve anything at all and so on...
And just if someone here comes up with comments like:
"work's here" or "just rollback to the old version", what is the point of writing software that doesn't work?? And why not giving ANY SUPPORT AT ALL???!!!
I really would at least like to see an official statement saying "we work on it". After buying one of the most expensive notebooks on the market (and in my opinion still one of the best) hat would be the least one could expect form a "award wining" company like Lenovo...
Regards
Martin Pauli

Hello, I am a Help Desk Consultant at Rensselaer Polytechnic Institute and currently, we've had many problems with access connections, 4965 agn wireless card, and its drivers.
Symptoms:
1) Wireless card is detected my windows device manager
2) Wireless card is NOT detected by access connections, intel wireless utilities/tests/etc
Other related information:
1) Events with ID 7036 + source: NETw#v## (the # stand for numbers, I can't quiet remember which ones but the one after the v is a 5
2) Rollback driver is NEVER an abailable option
3) Every failure case with same symptoms came in starting mid September
4) If you select "show hidden devices" in device manager, there is a huge number of devices, most of which seem to be repeats
After many hours of debugging and fustrated complaints, I have determined that it could be one of many problems:
1) Teredo tunnelling: Apparently, atheros/intel/access connections won't find the wireless card if teredo has been enabled or something
2) Power management: A default setting is "let windows turn the wireless off it there's not enough power" in wireless properties>configure>power management
3) Driver update combination conflict: between a update on 9/21 and present time, there's something horribly gone wrong
If anyone has a definitie solution to this, please post.

After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer u

After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.

You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

My phone wont power up and its not the battery or the software as ive updated all the latest versions to my pc, it gets to the apple on power on and switches off? halp!!!

my phone wont power up and its not the battery or the software as ive updated all the latest versions to my pc, it gets to the apple on power on and switches off? help!!!!

got no idea me like??

[SOLVED] Gnome Shell doesn't search through recently used items

A while back I ran chattir +i on ~/.local/share/recently-used.xbel because of a bug that gnome shell had where it would crash while searching for recently used items. Since I've now updated to 3.4.1, I figured the bug might have been fixed, so I ran chattr -i to allow writing to the file again. The file has since filled up with my recently used items, but they don't seem to appear in the gnome shell search.
Sorry if this is a bit brief, but I'm not sure what other information to give on this problem.
Last edited by themusicalduck (2012-04-25 22:32:38)

I believe this was removed with 3.4.
Here is the bug report: https://bugzilla.gnome.org/show_bug.cgi?id=670150
And here is the gnome-shell commit: http://git.gnome.org/browse/gnome-shell … 8c68782d54
Last edited by bzt (2012-04-25 17:04:57)

I recently upgraded to the latest version of FF and now when using a webmail client I am routinely logged out when I try to search e-mail. Why? I go to IE and it works... but, I hate IE.

I recently upgraded to the latest version of FF and now when using a webmail client I am routinely logged out when I try to search e-mail. It works in IE, but I don't like or want to use IE.
== This happened ==
Every time Firefox opened
== Today

Unstable means it can vary in stability day by day as it can be crash prone to being stable. Features can be a work in progress for a while. The May 24 Nighty build was crash prone for a lot of testers for example.

The certificate is not valid and cannot be used to verify the identity of this website

Question posted in Stack Overflow too: java - How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error? - St…
The question is, How to solve "The certificate is not valid and cannot be used to verify the identity of this website" error?.
Here are the details:
I have a signed applet that has been working fine, until I updated Java to 8u25 (1.8.0_25-b18). Now, the application shows an alert message "Do you want to continue? The connection to this website is untrusted". There is a note in this message too, "The certificate is not valid and cannot be used to verify the identity of this website".
The applet is loaded without problems. But when the user tries to use a specific function of that application, the warning message is displayed.
I've checked the java console when this happens, and this warning message is displayed right after these lines:
security: Obtain certificate collection in SSL Root CA certificate store
security: Invalid certificate from HTTPS server
network: Cache entry not found [url: https://sub.domain.net:9876, version: null]
The application is downloaded from a different domain, say "https://app.domain.net/ .....", so no jars are downloaded from "https://sub.domain.net:9876 ", but the applet connects to "https://sub.domain.net:9876 " to send/receive data.
The applet is signed correctly, and so far, it meets all the security requirements according to Java. This issue seems to happen when the application tries to connect internally with an HTTPS url like https://sub.domain.net:9876. That sites' SSL certificate is valid, issued by GoDaddy and has not expired.
Again, this started to happen after updating my JRE to 8u25. I've tested adding the offending URL to Java security exception list, with no success.
Here are a few screenshot of this problem:
This is the warning message displayed:

For what it's worth we discovered what the issue was. When we installed the new certificates onto our servers we also discovered that you have to install the certificates of all intermediate servers listed in your certificate. This mean that all URLs listed on your certificate, have to have the intermediate certificate for the certificate authority installed. This also includes all the Alt Names of your domains, even if they do not use the applet.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

How to test the SAP modules like SD and MM By using Quality Center and QTP

Hi Experts,
How to test the SAP modules like SD and MM By using Quality Center and QTP. Can you please provide the documentation regarding this.
Regards,
Skumar.

Hi Sampath,
First install QTP and SAP Addin with in QTP.
2nd use QC to develop the test plan and then convert that test plan design to Test Scripts (QTP vesrion using settings)
3rd record the R/3 GUI screen of SAP for SD, MM like Create order or Create PR.
Once recording is done QTP will create a script in VB
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SAPGuiOKCode("OKCode").Set "/nVA01"
SAPGuiSession("Session").SAPGuiWindow("SAP Easy Access - User").SendKey ENTER
you can always add a parameter and other customization according to your requirement.
Let me know if you need more information regarding this.
Good Luck!

HT201303 Every time I try to DL an app it wants a credit card, the app is free! And I already used my password.

Every time I try to DL an app it wants a credit card, the app is free! And I already used my password.

If you didn't create your account with NONE set up using the link below you can purchase add a credit card then take it off right away. Or you can purchase a gift card with cash so that Apple won't have access to your credit card, if you're concerned.
http://support.apple.com/kb/ht2534
If you don't have the option for NONE you'll need to add some sort of payment.
Cheers!

I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

No need to apologize, Jim. I think your rant was justified. For years people have been telling me how easy the Mac was to use. Imagine my frustration when I finally learned from friends and users that it takes weeks or months to make the transition from Windows to Mac.
Still, I agree that I acted to too hastily when I returned my mini-mac to the store only three days after I bought it.
I'm going to try again, this time with an iMac. This time I'll keep it. Since this thread is for the mini-Mac only, I'll probably be starting a new one for the iMac.
Why did I decide to try again? Well, I do like the faster speed and compact hardware of the Macs. I also like the fact that I can install Windows and use that for my programs until I transition completely to Mac, IF I make the complete transition.
Thank you all for your suggestions and advice. I have paid attention to what you said.
Andy

Making the Gnome-Shell power manager and sound applet use stock icons

Similar Messages

Maybe you are looking for