Making the side buttons of the mighty mouse go back in safari

Hi,
I found out that I can assign a custom key command to menu items in safari's browse-back-action. I've also seen that these settings are stored in ~/Library/Preferences/.GlobalPreferences.plist at the NSUserKeyEquivalents dictionary. Well, is there a hidden way to modify the entries to support Button 4 of my mighty mouse? I can't do that via the preferences panel, but maybe someone knows what to enter there.
Tekl

i think you're looking too deep. you can configure your mighty mouse buttons from within system preferences --> keyboard and mouse preferences. also, see the apple might mouse web site for more info.
hope this helps!
brian cometa
<edited by host>

Similar Messages

  • Does the magic mouse not have the feature of viewing all open pages on desktop like you do when you use the side buttons of the wired mouse?

    Does the magic mouse not have the feature of viewing all open pages on the desktop like you do when you use the side buttons of the wired mouse?

    No, you'll have to use Mission control for that.  It's either located on the dock, the F3 key on recent laptops on a swipe on the trackpad.
    Regards,
    Captfred

  • How Can I configurate the side button of the ipad?

    I've just downloaded the latest iOS for iPad. Although I was waiting for it I trusted the button will preserve its function of *screen orientation lock*. So, my question is about it, how can I reconfigurate this button? It's possible? Is there any way?
    Thanks for any solution!!

    No, unfortunately. It is now for muting. You'll have to use the software orientation lock instead. (Double click the Home button, swipe the tray to the right so you can see the lefthand part and use the button there.)

  • Right button woes with mighty mouse

    I have found that the right button on my mighty mouse quite frankly isnt very good. The mouse only detects i have clicked the right button when my left finger is completely lifted off the left mouse button, if it is merely resting on the left hand button, then the mouse detects a left mouse click when in fact it is my right (or middle) finger doing the pressing.!!
    Most annoying...it may sound minor, but retraining my left finger to lift up whilst my right is pushing down is proving very tricky indeed!!!
    Any ideas??? Any kind of firmware update or anything??
    Anyone??

    Hello, Ben,
    This forum is for older, pre-PowerMac G3 Apple hardware, and so probably not the best place for you to get help with your issue. I'd suggest you ask in the MacBook Pro forum and see if someone can offer a suggestion there. It's possible that you just have a defective mouse.
    Good luck.

  • The sound doesn't work.  It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored and still no

    It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored the device and still no sound.

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My iphone is silent since downloading IOS7. All settings are correct and the side button is on.

    My iPhone is silent (ring tones and text alerts) since downloading IOS7. All settings are correct and the side button is on. HELP! Missing inportant calls.

    Try hard reset.
    Hold down the sleep and home button until the screen goes black. Turn the phone back on.
    If that doesn't work, back up the iphone using iTunes.
    Re-install the iOS by putting the iPhone into DFU (recovery mode.)
    To do this,
    Make sure the phone is pluged in to you computer with iTunes open.
    Hold the Sleep and home button until the screen goes black, immediately release the sleep button but continue to hold the home button.
    After a few seconds your iTunes should recognize your phone in DFU mode.
    "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    At this point you should click on "Restore iPhone"
    After your phone is done restoring, don't start as new iPhone. Restore from back up.
    If that doesn't work, you're SOL.
    Take it to Apple. Tell them they are stupid.

  • I dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

    i dropped my ipad mini and the left side got dented .. so the volume buttons and the mute is not working anymore .... and when i am playing games the volume automatically goes up... i still have warranty .. so does apple replace a new one?

    Steven ~ Welcome to the Support Communities. The following may be useful for next time...
    AppleCare+ for iPad extends your coverage to two years from the original purchase date of your iPad and adds up to two incidents of accidental damage coverage, each subject to a $49 service fee. Note: AppleCare+ must be purchased within 30 days of the date you bought your new iPad.
    iPad mini cases from Tech21
    iPad mini screen protector from Tech21

  • Why I am unable to adjust the ringer volume by the side buttons and there is no ringer with the Mute button OFF

    With the mute switch OFF - I am unable to adjust the ringer volume by the side buttons. 
    When someone calls/texts there is no sound coming from the speaker.
    The headphone jack works when I listen to the Ipod and the speaker works when I change the ringer volume through settings.  So i know that the speaker does work
    Headphone jack seems clean and dust free
    I heard that there may be a Skype issue than can control the speaker volume - so i deleted it but i still cannot get any sound from regular functions.
    When I play the Ipod through the speaker with no headphones there is no option to change the volume and no sound.
    If it works when i go through settings to set my ring volume, my ringtone plays - then why does it not work otherwise?

    I have Iphone4s 16GB, IOS7.0.4 updates having a problem , that when i press + or - volume keys while my iphone is ringing my iphone 4s goes silent .
    Whereas you know silent key is used to make the ringing phone silent. This button is working ok while only problem is my iphone goes silent while pressing + or - volume keys as these keys should increase / lower the ringing volume . These keys were ok working in IOS 6.
    Where as these keys are also working ok  in music player of iphone for IOS 7, the only problem is for ringing.

  • Just down loaded iOS 5.1 now the home button on the side of I pad is not working

    Down load new iOS 5.1 now the home button on the front of iPad is not working.

    Pam, I don't think I was rude and, in particular, I did not intend to be. The Home button is the Home button regardless of whether you hold the device in portrait, landscape or even in an upside down position!  In fact, I wondered if you meant the side switch (above the volume buttons) and my phraseology was meant to nudge you in that direction had you wrongly described it. Regardless, I gave you the benefit of the doubt and went on to make two suggestions which shows that I wanted to help.
    If nobody else comes up with a suggestion you might wish to go down the route suggested in this link - http://support.apple.com/kb/ht4097
    As an aside, but still on the help theme,  there are a remarkable number of people who come on to this forum seeking help, get it, and never take the trouble to report if they get the problem sorted out!
    Varjak paw. Thank you for your discernment.

  • IPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar.....Help!

    iPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar how do i find it again?.....Help!

    You can use iTunes, connect iPod Touch to computer iTunes.
    Select iPod Touch in iTunes under DEVICES (left panel)
    Select Books tab (right panel near the top)
    Deselect those books that you have read
    Click Sync button (bottom right)
    Have a read to get up to speed using iPod Touch
    iPod touch User Guide (For iOS 5.0 Software)

  • Side buttons on the lcd panel

    Just wondering if the 3 buttons on the side panel are in line with the "circle" cut out or are they not aligned. meaning the hard plastic cover is not exactly aligned with the inner circle that your finger's suppose to press or touch.

    darn...the touch buttons on the side of my panel aren't aligned with the outer "cut out" shape of the transparent cover, or watever u call that, the acryllic?

  • I could not turn up the volume on my iPad using the volume button on the side. Is there any way to fix this?

    I could not turn up the sound (volume) on my iPad 2 using the volume button on the side. This happens after I have reduced the volume to minimum using the same volume button. The volume indicator does not move up at all. Note: it was not on mute, so the issue seems to be the button.

    Try this and see if it works.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • TS1630 I don't know what to do? When I try to set the volume with the side buttons the little speaker shows but the bars don't showe.

    What can I do about my iPhone 4s speaker not working

    That didn't work.... Thanks tho. When I press the side button it doesnt show me the little bars indicating the volume

  • I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

    you can connect an amplifier to the 3.5mm minijack but it will require batteries or AC power to amplify of cause

  • What is button 4 on Mighty Mouse?

    Hi,
    what exactly is the button 4-setting in the Mighty Mouse settings in Tiger and how can it be configurated.
    Thanks in advance - Christoph

    there is also the possible setting "Button 4" and I just wanted to know what that is for and where I can maybe specify what button 4 should do - other than the possibilities that are shown in the drop-down menue. Sorry for making it not clear...
    There is also the setting "Button 3" for the scrollball... I don´t want to believe that Apple just wanted to tell us that this is a third and fourth button... that would be obvious, wouldn´t it?
    Are you asking what it means if you set a button's function to be "Button 3", or "Button 4"?
    They don't do anything directly in OSX. OSX uses Left-click (Button 1) to select, and Right-click (Button 2) for contextual menu. X11 and other applications (such as Maya) may be written to work with a mouse with more than two buttons. When running such an application, the mouse settings determine which of the Mighty Mouse functions (pressing the scroll-ball, or squeezing the side buttons) will be interpreted by the application at the third or fourth button of a multi-button mouse.

Maybe you are looking for

  • Can Javascript trigger an action in a swf file?

    Earlier I was able to create flash buttons in a swf object in a widget on a Jive page, and have each of them trigger a separate Javascript function. That worked well.I used this in Flash: import flash.external.ExternalInterface; Now I would like to b

  • How do you save??

    Hi, I've just upgraded to iLife 09 and I'm in the process of creating a slideshow in iMovie. Can someone tell me how to save my progress as there's no Save option under the File menu. Thanks

  • Calling exe pauses Labview execution

    I've written a program that needs to call another program.  When that program opens, it pauses the now "background" vi, but I need it to continue running in the background.  If I chose 'F' for 'Wait until completetion' the main program doesn't pause,

  • Trouble installing reader

    i have tried to delete my reader, but didn't use uninstall but simply tried to delete the whole folder. two files couldn't be deleted. since then, when i try to download the newest version of adobe reader, i get the following message: "the feature yo

  • Comparision of Two tables

    I have two tables A and  B, and I want check wether these two tables are exactly the same. A to B and B to A. MSEHI*      MSEH3      MSEHT      MSEHL      ISOCODE %     %     %     Percentage     P1 4G     µL     µl     Microliter     4G AB     AB