Making titles appear crisp?

In CS5.5, some of my scrolling titles seem a bit soft/pixelated as they scroll.
1. Are there any general tips or guidelines for making them appear clean and crisp?
2. The Final Cut Studio had a program called Live Type for creating professional type on screen. Does Adobe have an equivalent? Are the type capabilities built into CS5.5 considered good enough for professional work or is there some other plugin that editors use?
Thanks.

This ARTICLE might be useful for creating Titles.
Also, exactly how are you animating your Titles? I find that Keyframing the Fixed Effect>Motion>Position produces very good results. I am less a fan of the Roll, or Crawl Presets, but for control reasons.
Also, with any animated Title, you will want to Render them, to play them back with best quality.
Good luck,
Hunt

Similar Messages

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Microsoft adcenter ad titles appear in internet explorer but not in firefox in English

Microsoft adcenter ad titles appear in internet explorer but not in firefox in English
Tried Microsoft help but so far unable to identify problem.
Thought it might be connected to java but removal of java makes no difference
Starting in safe mode resolves problem but about 500 add ons suspected

If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See [[Troubleshooting extensions and themes]]
* If you have many extensions then you can first enable half of the extensions to test which half has the problem.
Continue to divide the bad half that still has the issue until you find which one is causing it.

Same book appears multiple times in iBook collections. I have bought a few books in iBooks store but each title appear about 50 times. Also after synching or deleting book titles, they keep on re-appear.

Bought over the lat year a number of book titles but lately the book titles appear multiple time in the collection. It makes the collection UN accessible if you have to scroll down pages of the same title. I have tried to remove them from the collection but that doesn't work, they keep on re-appearing after the title is deleted. Is there a solution to this?

Oh, well that was a whole other kettle of fish:
Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
I didn't have to do anything with the iPhoto Libraries, that I can recall.
I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.

Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.

Hi Gauray
I can see it well but someone how works at the congress it appears:
http://www.oeso.org/monaco_conference2015/endorsements.html
Do you have an updated to clear browser cache automatically in Adobe CC Muse?
If not, how can I prevent browser cache?
It is correct if I put in Page Properties for Home Master, in HTML for ha scritto:
Why often after making updates appears: some files on the server may be missing or incorrect. Clear browser cache and try again.
created by Gaurav Sharma in Help with using Adobe Muse CC - View the full discussion
Hi,
Could you please provide a URL of the site, so we can check it. Also, take a look to this thread, discussing the same
Some files on the server may be missing or incorrect
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6767913#6767913
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Playlist song titles appear one after the other without playing

Some of my playlists simply show each track title for a brief moment, then the next title appears. If I don't move to another playlist, this goes on repeatedly from the first title to the last. Other playlist titles play normally. Why is this? Does it have something to do with track information (track numbers, artist, composer, etc.)? Thanks in advance for your advice.

Follow the directions here to restore the iOS:
http://support.apple.com/kb/ht1414
Do not restore from backup, rather sync your content back to the phone. Test now.

Making title shot dissolve to menu

I am following the instructions of Larry (Rescue Team) to place a title photo and a photo of the menu of my DVD into the 'Drag content here' box in iDVD map.
His instructions were:
___ Achieving what you want is easy to do,
if I'm correct in my understanding of your wish here.
When your audience slips your DVD into its player,
you want it to spring to life and display the Title
of your marvelous movie (for whatever period you specify),
and then you want your movie's Title to dissolve into
a display of your very first Menu.
___ Yes?
___ iDVD only thinks you can't place a transition at the end of a movie or a slide show.
__ Step One: Create the Menu in iDVD exactly as you want it,
and then take a snapshot* of that menu. Drag it into iPhoto next to the jpeg of your Title.
___ Step Two: Instead of placing a jpeg of your Title into the Autoplay zone in your iDVD map, place an iMovie comprising just two motionless Ken Burns iPhotos of whatever duration you choose, separated by a dissolve transition:
_________ 1) your movie Title, and 2) the snapshot your Menu.
Now, when your DVD starts, it automatically displays your Title, then dissolves to an image of your Menu, and then jumps seamlessly to the real Menu, and bingo! you've gotten just what you've wanted.
____ One little thing is necessary, though. Before you drag that snapshot of your Menu into iMovie, open it in whatever graphic editor your like (I use Graphic Converter) and make sure your snapshot contains all of your menu, but nothing more, and is precisely the correct dimensions. It will be, if you had dragged that snapshot marquee over precisely the boundaries of your Menu, no more, no less. Experiment. You'll get the idea.
But, when I try this, I have a problem with the 'seamless' jumping from the screen shot to the real menu. I have captured the screen shot, put it and the title photo into iPhoto, then into the short iMovie and dropped it onto the autoplay box of iDVD. It plays ok and looks good until the real menu 'pops' into place.
It appears that the screen shot is the correct dimension size, but there is an obvious jump from it to the real menu.
What other suggestions would help this work for me?

Creating a transition at the end of a movie that seamlessly returns to the originating menu requires a few things:
1) The originating menu must be static. The snapshot must be of a menu that never changes, otherwise a "seamless" transition is impossible.
2) The snapshot to which your movie's end forms a transition must be a perfect reproduction of the menu to which that movie will return.
___ I'm pretty sure I can shoot the trouble you're having in your gracious attempt to follow my clumsy instructions, Beverly, if you might describe in a little detail exactly what you see instead of the hoped-for "seamless" transition about which I keep bragging so tastelessly.
Perhaps this description of what I've just done to recreate the situation myself will provide your answer:
1) I chose the iDVD v5.0.1 theme Travel 2, and dragged Navigator's Wings into the drop zone.
2) I placed one iMovie and one Folder (a sub-menu) on this iDVD menu, and renamed them "A Tribute to My Uncle Jay — Play the Movie" and "Supplemental Materials" and moved them to appealing places within the TV Safe Area after changing iDVD's Settings/Button from Snap to Grid to Free Position.
3) To make sure I'm taking a snapshot of an accurate image of the menu, I press the Preview button in iDVD, and then press Menu on the Preview "remote control" to display the menu in Preview. I take a snapshot of that, making sure that I include all of it and maybe a little more for margin in editing.
4) I open the snapshot in Graphic Converter, Window/Show Information (which displays the exact size of selection you then make for cropping).
__ I drag a rectangular selection marquee over the whole image (it's 647 x 492 pixels), and then move each of the four sides individually to the precise pixel location of the perimeter of the menu (at which point, the dimensions are now 640 x 480), and save it as a jpeg.
5) I drag that into iPhoto (because Ken Burns still images allegedly display more clearly than simple stills dragged directly into the iMovie timeline).
6) In iMovie, I choose that Menu Snapshot from iMovie's iPhoto pane, make it a Ken Burns at 1.0 magnification to 1.0 magnification for some arbitrary period (a frame or two or even, if you like several seconds or so), and Apply it to the end of my movie.
7) I select the last frame of the movie and that Ken Burns still of the menu, and use an iMovie transition to link the two with a transition of choice, and I'm done.
Macintosh model M0001W (8 MHz) + Mac Mini 1.5 GHz G4 Mac OS X (10.4.9)

Wrong Title Appearing in Vendor Master Record

We have a situation where when a user goes in to change the vendor master, it appears to have a title selected in the "title" field, yet one is not maintained. They are using MK02, but the same issue appears with transaction MK03. The vendor is maintained in language DE (Deutsche) and the user is in German (note that I get same results using English). This 'title' is not appearing in the output, only on what is seen by the user(s), so it is a low priority issue, but one that still needs resolution.
We are on a 4.6C system, and are on Support Pack SAPHK46C48. I found an OSS Note that covers this problem, OSS 402538, but it is included in Support Pack SAPHK46C21, which is already applied to our system. That was the only note that I could find that seemed relevant, so need some expert guidance. Thanks!

Found solution is to maintain different translations for the titles, including a "blank"

When I share video to my macbook it cuts off opening titles and starts vid a few seconds in. I have tried making titles part of timeline, not appending them, but it does the same either way. Any advice on how to get it to include opening titles?

I'm having trouble getting FCPX to share my entire video, it cuts off the opening titles and starts a few seconds in when I share to my MacBook. It's my first vid so I've done a few daft things like editing the audio after I put the visual together, so had to detach it and re-attach it. Is this the possible root of my problems?

Hi Tom
Version 10.0.5 FCPX. Can't send screenshot at present. However on all three versions of the video I have in Projects there is a shaded area on the left at the start. Shaded from top to bottom over the credits and sometimes over the first two or three seconds, this extends to the left and fills the project box before the 00.00 counter and the timeline starts. This only appears when I expand the timeline so I can see the clips I've attached. It's not visible if I just have the timeline and no clips or audio showing. I think it corresponds to the part the export is cutting off. I'm self-taught from tutorials and handbook and it's all new to me, no editing experience prior to the last two weeks.
Couldn't upload to Youtube at all, though it did go to Facebook, but with two audio tracks playing, so export is proving a bit tricky. Also after attempting to share two different versions of the vid an icon has now appeared beside it's name in my Projects next to these two versions showing an audio sign and triangle with exclamation mark. Another version of the vid has the same icon and freezes the computer when I try to open it and is just a black space where the timeline should be. I can't even Move To Trash. I think there may be an audio problem: the main timeline footage should have had audio but was silent, probably a mistake made when it was shot. So I synched audio. However, I think there is audio on the main footage but just unavailable to me. Could be this is messing it up? I'm clearly doing something wrong! Also as mentioned, edited the audio after I'd synched it, so had to detach the synched audio and re-attach an edited version. Could be I went wrong there. I just highlighted, deleted and attached the new audio.
Might download an unexpanded version and see if anything's different. Failing that may go back to scratch, synch edited audio and try again and just not put on start credits. However, could it just be a bug in the software? Would re-installing help?
Appreciate your help.
Thanks.

Does the book title appear on the dust jacket spine?

Here's an easy question for anyone who has recently printed a book using iPhoto 08. I was just wondering if the new dust jackets show any printing on the spine. I printed my book to a PDF, and this would see to indicate the answer is "no", but I thought I'd double check.

Paul:
Yes, the title is printed on the dust jacket spine. You can see it in this view of the dust jacket form the pdf file that is created for uploading and printing. It's the text just to the left of the large picture with lots of red in it.
Click to view full size
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Title-blurry but Title 3D Crisp

Hello again,
after just returning from Macworld, I met with my client and showed the movie we're working on, and while they were overall pleased, the plain text titles were blocky and pixelated. We were watching the video off a dvd, and the metallic Title 3D titles I used went from kinda bad looking in FCP to crisp and clear thanks to DVD Studio Pro and the m2v encoding, but not the regular title. The client then began telling me what I did wrong with the titles (adding a drop shadow or outline) which I hadn't. Now I need to redo ALL the titles so that they're still a plain style (not 3D) but clear. I don't know if this makes a difference, but the titles are red, not white or black.
Does anyone know what I did wrong or what I could do to fix them without needing to remake them? We were watching the DVD on a laptop and asked if it was tried in a TV since that may clear up the title but was told that it'd never be played on a TV, always through a computer. The deadline is getting VERY tight, so quick replies are MUCH appreciated.
Thanks again,
-Brian

was told that it'd never be played on a TV, always through a computer<<</div>
If it's for web, CD-ROM or hard drive playback only, an external TV monitor won't really help - although it can come in handy for spotting interlacing issues and other things that can affect progressive playback as well.
But keep in mind what Studio X said; FCP's Canvas window only displays a proxy output (not full quality) even after it's been rendered. If/when you export to QuickTime, also keep in mind that by default, QT Movie files are not created with the quality flag set to high. You can set the high quality flag manually in QT Player (pro) or by using a drop-n-drag program like HiQual ( http://www.versiontracker.com/dyn/moreinfo/macosx/14255 ). Once the flag has been set, your QT Movies will look much better on a computer screen.
-DH

Grey shadow left after titles appear in Flash slideshow

Hi, the producers of the Flash slideshow product i am using do not know the reason for this problem.
When the slideshow runs, titles we composed using the product dashboard (as a Dreamweaver plugin in Dreamweaver CC) appear. The titles are dynamic and have a background colour, some white, some dark grey. There are 4 slides each with titles in different places.
After the slidshow has run through around 5 cycles, the titles leave grey shadows about 2px wider and longer than the tile size. All title shadows accumulate so that each slide shows the shadows from all slides, obstructing view.
Only a screen refresh restores correct view.
It happens in all browsers, using latest browser versions, and on a variety of computers. The slideshow can be seen in our test server. The wesbite is still in construction.
http://www.destinationdata.co.uk/Bacobanuk/
The slideshow producer say they do not expect anyone to sit and watch it for so many cycles - true, but, if when viewing, as frequently happens, a telephone call comes in, someones interrupts to ask for information, stop for a cuppa, on resuming viewing, the slides are obscured.
Regards Jonathan

Hi, thanks for quick response. Strange you do not see that, the product developer guys in the USA admitted they could replicate the issue, but, did not know why it happens, and I can today on various machines, all Win 7.
I have a screen image of it taken today with the shadows showing, and I could send a screen recording video of it building up, if that helps.
Rgds Jonathan

How do I make title appear in the background?

My videos are similar to Apple's white background and text videos. I'm trying to make the text appear in the background. There two parts of the video where my hand is covered by the text on screen. Please help. Thanks!

If it is truly white, you can try this.
Put a pure white matte on track one.
Put your title on track two.
Put your video on track three and apply a luma key to get rid of the white background. You will need to restrict it to just the tightest settings to only get rid of pure white (RGB 255,255,255)
That should put you over the title.
But it will only work if your clothing has no pure white and your background is pure white. If it isn't, you might have to play with the levels to get it white, then create a matte from the result in order to key out the white.

Why does my podcast episode title appear different after subscribing?

In the iTunes Store everything is perfect with my podcast and episode title.
The episode title is:
"Blinkers Off 001: Oaklawn Begins"
But once I subscribe and it goes into my library (this is happening with others as well), the podcast title and everything looks fine but the episode title has changed.
The episode title is:
"001: Oaklawn Begins"
What happened?

I'm using the Apple Podcast app on my iPhone. Here's what it looks like in iTunes when I search for my podcast.
And here is what it looks like in my podcast library on my phone after I subscribe to it:
This makes no sense to me. I've checked my RSS feed and everything appears correct. It has to be an issue with the Apple Podcast app. Any ideas?

Making titles longer?

I dropped a title template on my timeline and have edited the way I want it, and have added an animation that makes the text appear from off screen. My problem is I need to make the text appear longer on the screen at the end.
If I drag the right end to make it longer, or use time stretch to expand it, it does change the overall length of the title, but it also slows the animation, delaying when the title finishes appearing.
Is it possible to change the duration of a title WITHOUT changing the speed of the text animation?
Bruce.

Thanks Peter but I have a question about that. It would take too long to recreate the title from scratch for a second instance, so I'm trying to use copy/paste to create the second instance and then remove the text animation from the second one.
I can copy the first one to the clipboard, and then paste, but the 2 titles are now linked somehow. The second one is not an independent copy. If I remove the text animation from the second one, the first one loses its text animation too.
How can I copy a title without the copies remaining linked to the original?
Bruce.

Making titles appear crisp?

Similar Messages

Maybe you are looking for