Making tracker mails easier to filter

Hi,
Any chance of including the thread subject into forum tracker e-mails? That would make OTN forums much easier to track by e-mail, because I could easily skip over the messages that are not interesting and sort them by thread in my e-mail reader. With the current set-up, OTN Discussion Forum "Database - General" has been updated does not say much about what is in the message, so I have to open the message body to see if it contains something of interest to me (and there are quite a lot of messages in that forum daily).
gojko adzic
http://gojko.net

We have requested this enhancement from Jive.

Similar Messages

  • Is there a limit to number of conditions I can set in Mail's spam filter?

    There seems to be a limit to the amount of conditions I can set in Mail's spam filter. ie there's no scroll bar down the side - the list just goes as long as my computer monitor's length will allow, and that's it.
    Is that right - or is there a way to set more than about 28 conditions (in my case).

    Tim,
    yes, you can add more conditions (I don't know whether this is a limit or not) using AppleScript - the problem with the approach is that you will have somewhat of a hard time editing the rule in Mail after that as the buttons at the bottom of the window will no longer be accessible...
    Look at the following AppleScript as an example on how to add a new condition to a rule called "Junk Rule"
    Click to open this script in your Script Editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; padding: 0.2em; font-size: 10px; width:500px">tell application "Mail"
    tell rule "Junk Rule"
    set theNewCondition to make new rule condition at end of rule conditions
    tell theNewCondition
    set rule type to subject header
    set expression to "viagra"
    set qualifier to does contain value
    end tell
    end tell
    end tell</pre>
    Andreas

  • SC does not appear fast while making tracks in CMS..Why....Please guide

    Hello All,
    1. I created a SC in SLD (Product -> SU)
    2. Now. while making track, this SC does not appear immediately.
    <u>Question</u>:
    Why does this SC take soooo much time to appear? Wat can I configure/setup to make this process faster?
    Please guide.
    Awaiting Reply.
    Thanks & Warm Regards,
    Ritu

    Hi Ritu,
    Once you create a SC make sure that you click on Update CMS button once you login to CMS. This will make CMS read SLD and refresh its cache.
    Regards
    Sidharth

  • How do i make business cards...making 1 is easy, but how do i duplicate it onto the rest of the template?

    how do i make business cards...making 1 is easy, but duplicating it on the rest of the template?

    See iworktipsntricks.

  • How to Test Mail's Trainable Filter?

    In the Apple Support Discussions topic No Junk mailbox in Training mode? a question arose regarding how to test if the trainable filter (the filter that evaluates the "Message is Junk Mail" condition) is evaluated independently of the other conditional tests of the Junk Filter rule -- IOW, if some other test condition in the Junk Filter rule, like sender is not in the address book, evaluates to false, does the "Message is Junk Mail" test which follows it in the rule's list of conditions ever get evaluated?
    A proposed test for this involved resending to yourself a message that Mail had previously marked as junk using the "Message > Send Again" function of Mail. It has been pointed out to me that this probably isn't a valid test because "Message > Send Again" doesn't send the original message in unaltered form (there are substantial changes in the header info regarding sender, path, etc.) & thus the filter may not consider the resent message as junk, even if it were to evaluate it.
    So, for testing purposes, does anybody have a suggestion about how to resend (or fake resending) a received message to myself without altering its header info?

    What matters is whether the Message is Junk
    Mail condition would still evaluate to true
    regardless.
    That depends on what you are trying to determine & if the test produces decisive results.
    For instance, consider tests with the standard Junk Filter automatic settings & no other rule involving "Message is Junk Mail" in the list. A test is performed in an attempt to determine if the filter's conditional tests are performed in the indicated order only until one evaluates to false.
    "Send Again" should not cause the "Message is Junk Mail" test to be evaluated at all, since in this case the sender is oneself & the Junk Filter should exit as soon as the 'sender not in Address Book' test is evaluated.
    Yet, when I try this with a message (correctly) marked as junk when originally received, the resent version is still marked as junk, & this happens not just on my on Mac but on the few others I have checked as well. I have tested with only a limited number of junk messages because on the other Macs the owners do not keep them for long & on my own I do not get that many (AOL is my primary account & has excellent spam filtering), so I would love to know if readers of this topic see similar results.
    BTW, I should mention here what might be a potential hazard of using "Redirect" for testing with "real" spam: As I hope everybody knows by now, it is a bad idea to enable automatic loading of remote html images because doing so can alert spammers one's email address is valid. In one case, when I tried the "Redirect" method on my own Mac, AOL refused to accept the redirected message, possibly because of AOL's spam filters. At that point, Mail displayed the message, asking if I wanted to try sending it from another account, edit it, or what. Even though I have the option disabled, Mail loaded the original's remote html images along with its other content. I don't know if that is a design feature of Mail, a problem with just my Mac, particular to AOL, or what, but I want readers to be aware of it, just in case.
    Anyway, for this reason I have since confined myself to testing with "Send Again," which seems safe in all cases, & mostly to testing only on my on Mac, just in case it is not.
    Back to the "so what" aspects of this topic: It may be that the "Message is Junk Mail" test is sometimes treated differently from the other conditional tests in the Junk Filter in that it may be evaluated first or even if other tests before it evaluate to false. This makes some sense as a design feature in that even if the Junk Filter's automatic mode action isn't performed, it gives users more training opportunities. It may be a bug. It may just be something particular to my Mac. It may be something else, perhaps having to do with trusting junk headers, or something more subtle as yet unconsidered.
    In any event, the point is holding all variables save one constant in any single "black box" test of a multi-variable system is a necessity for definitive results because variables may be interdependent. Because of this, the ability to resend to oneself the same message in unaltered form would be useful for a variety of tests, so I would still like to know if anyone has any ideas about how to do this.
    iMac G5/2.0 GHz 17" ALS (Rev B)   Mac OS X (10.4.7)   512 MB RAM, Kensington Trackball

  • Making the Xtra easi

    My grandpa recently just gave his Zen Touch to his daughter... went out to get a new one for himself, and ended up getting an Xtra. I guess they were out of Touch players, but he got a great deal on the Xtra.
    But anyway, this is the problem... he's old... and not too technologically inclined. He seemed to be doing fine with the Touch - the way it worked. I think the dial on the Xtra is easier for him, but in terms of how the player acts... it's much different from the Touch.
    He got very used to being able to go into Artists, find an artist, and hit the Play button. On the Touch that would load that artist up and start playing it instantly. Now when he tries to do that it pauses what's currently playing. I can't say which I like better, but I do know it's easier for him to just hit play and it play what he's selected.
    Is there any way to change it to where the play button will play what's selected?
    I also noticed as you Add artists to the Selected... when you go to the Selected Music screen, it lists the Artist, and then you are able to expand or collapse the individual tracks of that artist. I love this!! I think that's very neat.
    But my problem with this is that when you save that Selected as a Playlist, when you load the playlist, it will not appear like that. With the artists, then the tracks branched. Is there any way to save your selection and have it load exactly as it was, with the collapsable artists and all?
    I don't have his player with me, and I can't remember which version of firmware he had. Does any recent firmware make these types of changes?
    I think it's cool my grandpa is even getting into this type of stuff... I never thought I'd see an 80 year old guy playing with an MP3 player! But the Touch format was very simple in ways that I think an MP3 player should be. And while I think the Xtra has some neat features, I think the functionality of the Touch is the way to go. But even if the Xtra can't be like that... I wish there was a way to just make things straight forward to make it easier for him.
    I'll have to play around with it and figure some more things out, but any help or information on the firmware changes in these ways would be great!
    Thanks a lot for anyone who can help.
    - Darin

    Darin wrote:He got very used to being able to go into Artists, find an artist, and hit the Play button. On the Touch that would load that artist up and start playing it instantly. Now when he tries to do that it pauses what's currently playing. I can't say which I like better, but I do know it's easier for him to just hit play and it play what he's selected.
    No, I don't think there's any way to enable it. I'm surprised, as my NJB3 works this way and predates the Xtra.
    I also noticed as you Add artists to the Selected... when you go to the Selected Music screen, it lists the Artist, and then you are able to expand or collapse the individual tracks of that artist. I love this!! I think that's very neat. But my problem with this is that when you save that Selected as a Playlist, when you load the playlist, it will not appear like that. With the artists, then the tracks branched. Is there any way to save your selection and have it load exactly as it was, with the collapsable artists and all?
    No, the context is lost. Has been on the wishlist for a while.
    I think it's cool my grandpa is even getting into this type of stuff... I never thought I'd see an 80 year old guy playing with an MP3 player! But the Touch format was very simple in ways that I think an MP3 player should be. And while I think the Xtra has some neat features, I think the functionality of the Touch is the way to go. But even if the Xtra can't be like that... I wish there was a way to just make things straight forward to make it easier for him.
    The Touch does have a streamlined interface, in that they removed some features based on customer research. A lot of people have complained about this though.

  • Mail easy scenario ...

    Hi.
    I'm trying to do a simple mail scenario.
    I receive a file and i only want to send the two fields that came in that file (name and surname).
    I've defined a Data type with those to fields.
    Then, the message type and the message interface (one outbound and the other one abstract)
    Then, a simple BPM with a receiver (file) and sender (email).
    In ID, i've defined the sender channel and the doubt is ...
    when i define the receiver determination, with sender the BPM and receiver ...?
    Thanks for your answers.

    Hi,
    >>>Then, the message type and the message interface (one outbound and the other one abstract)
    you need one inbound (for mail) that's for sure
    use a business service as receiver - easy to configure
    Regards,
    michal

  • Tracking Mail Flow " user cannot get mail from server"

    Please help to tracking message from mail flow on ECP.   Why user cannot get mail  ?
    Delivery Report for [email protected]
    Pending
    3/19/2014 9:36 AM exchmb01.test.in.th
    The message has been transferred from exchmb01.test.in.th to
    exchmb02.test.in.th
    3/19/2014 10:33 AM exchmb01.test.in.th
    No further information is available about this message because the logs are no longer available.

    Hi,
    I recommend you enable message tracking, using the following cmdlet:
    Set-TransportService xxx -MessageTrackingLogEnabled $true
    And then use message tracking log to check if there is any information.
    Here is a helpful article for your reference.
    Message Tracking
    http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Making tracks a stereo pair

    I don't think it's possible, but...is there a way to join audio tracks, making all the clips a stereo pair at once -- rather than one at a time?

    Which version of the software are you using? It works for me in 3.5, and as far as I know it's always worked that way. Select the clips in the timeline and press Option-L. That should toggle stereo pair on and off. That's assuming there are two tracks for audio for each clip that can be changed into a stereo pair.

  • Using Applescript to track Mail "Mark as Unread"

    Hi,
    I'm new to actionscript, I've never written anything using it. I'm a web developer, so I know JS, PHP and languages like that, but Applescript seems quite different to me.
    Anyways, I would like to know if it is possible to have a script in the background with an event handler that will trigger additional actions when a message is marked as unread?
    Pretty much, I want some code (that I will work out later) to be executed when a user marks a message as unread in Mail. ("Message"->"Mark"->"As Unread" OR ⇧⌘U)
    Thanks

    I'm new to actionscript
    You mean AppleScript, right?
    I would like to know if it is possible to have a script in the background with an event handler that will trigger additional actions when a message is marked as unread?
    Not directly. The ideal way of doing this would be for Mail.app to have some kind of option to attach AppleScripts to events within the application. It's entirely possible to do within the OS, but few applications take advantage of it - that includes Mail.app, so there's no way to have Mail.app call your script directly.
    The closest you could get would be a background script that silently polled Mail.app for the status of all messages and somehow detect when a message went from Read to Unread. This could be unwieldy, especially if there are many, many messages in the mailbox - you pretty much have to keep track of every read message and scan for any unread messages that are in the previous read messages list. This option doesn't work if you want to perform some real-time action such as interact with the user since there would always be some delay between the user action (marking the message unread) and the script noticing it.

  • Multiple E-mail Address' & Junk Filter

    Many of the entries in my Address book have multiple e-mail address'. I have the Junk filter set to put into the Junk Folder all messages "from Sender not in my Address Book." Will this filter look to only one of the e-mail address' for a particular individual or will it look for all the e-mail address' listed for that individual?
    G4 733 / 14 iBook [1 ghz]   Mac OS X (10.4.3)  
    G4 733 / 14 iBook [1 ghz]   Mac OS X (10.4.3)  
    G4 733 / 14 iBook [1 ghz]   Mac OS X (10.4.3)  

    Hello Norman.
    It is my understanding this works for all email addresses available for a particular contact/individual in the Address Book.

  • Yahoo e-mail page is distorted and hard to read (once in a while its OK) - box does not extend to the right side making e-mail info hard to read. Info displayed in the reading panel is OK.

    When I open the Yahoo email page, the box does not extend across the screen and the script is distorted making it hard to read the source, subject etc. The reading panel info reads OK. All other pages of Yahoo are not distorted.

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

  • Hiding & Making tracks inactive in AUDITION... i.e. PROTOOLS

    I am just learning and starting to work with Audition CC (long time protools user), and loaded some OMF files into Audition (with REF video), and once I pull all my dialog (from the OMF's) to my dialog tracks I want to close/hide and make those original OMF tracks inactive, just like you can in protools (so you don't have a bunch of tracks open that are not in use).  Please tell me this is an option in AUDITION, becuase if it is NOT, this program is virtual useless when it comes to PRO-LEVEL sound designing???  HELP!

    Guys, don't get me wrong, I am a huge proponent of moving to an ALL ADOBE workflow.  I have completely made the switch to PremPro (after a long stint with FINAL CUT).  I am completely happy with this change as PP is a better program, utilizing much more updated technology.  I am learning and trying to utilize SpeedGrade with its awesome DIRECT LINK (but it does appear to have some limitations), and I am currently working on a viable workaround to those.  Over the past couple of weeks I have been "cramming" an extensive education on AUDITION (and I LOVE most aspects of it).  I do feature film sound design so it is imparitive that I am working on a "robust" program (and for the most part I am seeing good things with Audition).  But, when I typically work with a team of 4 to 5 different people contributing to the sound design (i.e. guys that are sending me Background sessions, Foley Sessions, dialog editing, Music/Score etc..etc), I have to import tons of tracks that are then analysed and discected in PROTOOLS (using just the parts we deem worthy to "make the final product").  Therefore (once we pull the appropriate parts from those external sessions) I can end up with 40-60 "dead" tracks  inside my MASTER MIX session, and for many reasons I have to be able to hide and make these "dead" tracks INACTIVE!  They will "kill" your session if you do NOT, they are a huge drain on the processors (creaing latency), and they are extremely hard to work around in your edit window (and moving them all to the bottom of the edit window is not a good option).  That was my first thought as a "work-around" in AUDITION.  I appologize for my mis-communication regarding AUDITION being a PRO-LEVEL product, as you have pointed out that it is used in RADIO, but I was specifically referring to feature film "SOUND DESIGN". STEVE G I am not "writing off" AUDITION at all, I want to use it and I am very interested to hear more about your idea of setting tracks to "off-line", I did try closing tracks in my "FILES" window, but once I did the files just disappeared from my session??? I do need the abillity to bring these "dead tracks"  back into the session at various times (i.e. "make active"), so I am a bit confused on this issue.  Any help you can push my way would be very appreciated.  Again, I want to use AUDITION, and will keep working on ways to do so.  But I need a solution to the very fundamental problem of not being able to hide (and make inactive) tracks for the work I do, it is a must for me before I can make the switch.  BTW... I have put in a request for new features to ADOBE.

  • IOS 5 & Making E-mail adjustments under settings......

    I have iPad 2 running iOS 5 and when I attempt to change  password under one of my e-mail accounts which I set up on iOS 4.x (Settings> Mail, Contacts, Calendars>), it locks up.  How do I remedy this problem?

    Known problem. There are many threads on this (did you try a search?)
    What you can do is turn Airplane Mode ON, wait 10 secs or so, then back OFF. Don't bother re-creating accounts, restoring, etc. It's a waste of time and will NOT fix anything.
    The problem is a crash of an iPhone process that handles Exchange push over cellular. You cannot fix it yourself. The trick above will restart the crashed process (as will a restart), but after some time (minutes or hours) it will crash again. It's a bug Apple created with iPhone 5 push software. It apparently works fine for other models.
    If you want to confirm the crashes:
    Settings>General>About>Diagnostics&Usage>Diagnostic&Usage Data
    Look for apsd_date, where date is the date and time of the apsd (Apple Push Service Daemon) crash. If you have one or more of these, you have the problem.
    Apple has to fix it with an iOS update. Many of us have opened support calls and Apple is aware of the bug and are working on it.

  • Making all mail larger without having to do one by one

    Just when I thought I was young enough to read email on my macbook...I am having problems with my mail program...When I read and create emails - the type is small and I want to make it larger. I can do this if I click on plain versus rich text, or if I command and scroll up with two fingers - but I don't want to have to do this one email and one...instead, I want to treat all emails (viewing/composing) the same. Is there a way to do this?
    Also - if I click on rich text - it makes it larger - but I want to make sure the receiver doesn't receive this email with really large text...but instead the 11-12 font I use on a regular basis...
    Thanks in advance!

    Hey Koyster,
    Great question. Utilizing iCloud.com, we may be able to purge these emails in a much faster way:
    iCloud: Delete email
    http://support.apple.com/kb/PH2651
    Delete messages
    - On your Mac, Shift-click to select multiple adjacent messages or Command-click to select multiple nonadjacent messages.
    - On your Windows computer, Shift-click to select multiple adjacent messages or Control-click to select multiple nonadjacent messages.
    Thanks,
    Matt M.

Maybe you are looking for