Malfunction error when I connect

Recently received an iPod from a friend. Everytime I try to connect the iPod [it's an 8g nano] I get the error message
'One of the USB devices attached to this computer has malfunctioned , and Windows does not recognize it.'
Not sure what to do. Any suggestiong? Also, no apple help topics have worked for me.
Thanks.
Compaq Presario Windows XP

Hi again, cupcake,
Let's try forcing your iPod into disk mode. To do that, follow the steps mentioned here:
Putting iPod into disk mode
With the iPod in disk mode, connect it to your computer.
If you still get a "USB device has malfunctioned" error when you connect your iPod, then let's try something else.
Make sure that your computer's USB drivers are up-to-date. And, in some cases, you may need to reinstall those drivers.
See this article for instructions on that:
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If that didn't work, then you can try reformatting your iPod to FAT32 in Windows, and see if that affects anything:
1 - Connect your iPod to your computer.
2 - When iTunes has finished syncing with your iPod, open "My Computer".
3 - Right-click on your iPod, and click on "Format". (If your iPod is not showing in My Computer, make sure that disk use isn’t enabled in iTunes).
4 - Here, verify that your formatting settings are "Default", with the format type set for FAT32. Also, make sure that "Quick Scan" is not selected.
5 - Then, click on "OK" to begin the formatting process.
6 - When this is complete (it might take a while), make sure to restore your iPod in iTunes again, so as to properly reload the firmware back onto it again.
Any success?
-Kylene

Similar Messages

I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please!

I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please

You can try going through this troubleshooting document
iPod nano: Error message saying that iPod 'could not be identified properly' - Apple Support

"USB Device Not Recognized" error when I connect iPod to my PC

I have a brand new 5th gen (I think) iPod.
I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
Can anyone suggest anything ?
I've tried the 5R's as far as I can, and I read through this thread:
http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
but there didn't seem to be anything conclusive.
Thanks for any help,
Jill

First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

Error when create connection in Xcelcius 2008 SP3 to BW EHP 1 SPS 6

Dear All,
Last week there is no problem in this connection, buat since today this error happen.
We found error when trying to connect Xcelcius and and BW,below the error:
com.sap.ip.bi.bics.remote.impl.rmi.ApplicationCreationException: Could not to create the application. This is probably due to a misconfigured Abap/Java connection.
at com.sap.ip.bi.bics.remote.impl.rmi.cc.AbstractConnectionContext.getApplication(AbstractConnectionContext.java:195)
at com.sap.ip.bi.bics.remote.impl.rmi.cc.AbstractConnectionContext.createBicsRemoteMessageProducer(AbstractConnectionContext.java:387)
at com.sap.ip.bi.bics.remote.impl.rmi.cc.AbstractConnectionContext.getMessageProducer(AbstractConnectionContext.java:209)
at com.sap.ip.bi.bics.remote.BicsRemoteImpl.getDesignTimeInfo(BicsRemoteImpl.java:156)
at com.sap.ip.bi.bics.remote.BicsRemoteBean.getDesignTimeInfo(BicsRemoteBean.java:109)
at com.sap.ip.bi.bics.remote.BicsRemoteObjectImpl0_0.getDesignTimeInfo(BicsRemoteObjectImpl0_0.java:379)
at com.sap.ip.bi.bics.remote.BicsRemote_Stub.getDesignTimeInfo(BicsRemote_Stub.java:328)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.ip.bi.base.service.connection.ConnectionException: No connection possible to BI master system BD1CLNT500
at com.sap.ip.bi.base.portal.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:71)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:568)
at com.sap.ip.bi.base.application.impl.Application.getMasterSystemService(Application.java:1027)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:829)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:346)
at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:326)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:63)
at com.sap.ip.bi.bics.remote.impl.rmi.cc.ConnectionContextStateless.createApplication(ConnectionContextStateless.java:72)
at com.sap.ip.bi.bics.remote.impl.rmi.cc.AbstractConnectionContext.getApplication(AbstractConnectionContext.java:172)
... 31 more
Caused by: com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BD1CLNT500"
at com.sap.ip.bi.base.portal.connection.PortalConnectionPool.getConnection(PortalConnectionPool.java:206)
at com.sap.ip.bi.base.portal.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:67)
... 39 more
Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:429)
at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.establishInitialConnection(SAPCFConnectorManagedConnection.java:204)
at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.init(SAPCFConnectorManagedConnection.java:183)
at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:129)
at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:338)
at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:262)
at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorConnectionFactory.getConnectionEx(SAPCFConnectorConnectionFactory.java:156)
at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:295)
at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:256)
at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:446)
at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:84)
at com.sap.ip.bi.base.portal.connection.PortalConnectionPool.getConnection(PortalConnectionPool.java:170)
Please your help and solution on this,
Thanks and Best Regards,
Widi

Hi Mustafa,
Yes, we are able to resolve the issue.
This issue happen because we change the configuration in
System Admin -> System Configuration -> Portal Content -> Systemlandscape -> (your system landscape)
- Display = Object
- Property Category = User Management
- Authentication Ticket Type = SAP Assertion TIcket
- Logon Method = SAPLOGONTICKET
- User Mapping type = admin,user
After we change this configuration, our we can connect with our Xcelcius to SAP BW.
Please kindly check your User Management configuration.
Regards,
Widi

Certificate error when using connection broker on Mac client

We're using RD Connection Broker using IP address redirection for a couple of years now. Previously Mac client were using iTap RDP without any problems. Clients are connecting using a RD Gateway server.
When trying to connect using the latest Microsoft remote desktop client (version 8.0.24255) a certificate warning is shown saying the IP-address doesn't match the name in the certificate. The client shoudn't match the IP address with the certificate but
should match the farm name. The error occurs when the connection broker redirects the client to a server.
Any help is appreciated
<style type="text/css">p, li { Version 8.0.24255</style>

Hi MatthijsO,
Have you updated it to 8.0.3? Does the issue persist?
Thanks.
Jeremy Wu
TechNet Community Support

I get a USB error when I connect my ipod to my CRv

I have an iPod 5th gen...
When I connect it to my' 2013 Honda crv, via USB.. I get a UBB Error on my dashboard. I hit the aux and other buttons but not able to get it play my music that is loaded on my iPod.
thanks
rt

Does Honda say it is compatible with the 5G iPod? It just may not be compatible.
Did you reset the car system?
Sometimes this works;
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Error when I connect my iPhone to my Mac

When I connect my iPhone 5 to my MacBook Pro (running OS X 10.9.1) I get an error that says "com.apple.MediaLibraryService quit unexpectedly"

Obviously you're a develper since you have iOS 8 beta. You agreed to NOT post in these forums. You must post in the Developer Forum for help.

Adobe Designer 7.0 - XML parsing error when data connection to XML with UTF-16

Hi all
 
 I need to change my data connection xml file to use UTF-16 instead of ISO-8859-1. When I connect the file with the UTF-16 encoding, I receive the following error
 
 Invalid XML: Xml parsing error: encoding specified in XML declaration is incorrect (error code 19) ..
 
 The XML declaration is:
 <?xml version="1.0" encoding="utf-16"?>
 
 I am able to succesfully set the encoding to "UTF-8". UTF-16 should also be possible.
 
 Has anyone seen this error before ? How can I resolve this ?
 
 Thanks in advance
 
 Bilal Haniff

Thank you, expert, for your quick reply.
Described problem got solved: we noticed later that the extra text only appears for users using Adobe professional 7.0, 'normal' users with adobe 8.0 reader don't get the extra text, so that is ok for us.

Database Connector Error when I connect SAP Crystal Report to dbase

When I connect SAP Crystal Report to dbase the error is "Database Connector Error", only when exist a field the type memo. I need to used this type of field, somebody that known how can I resolve this problem or some idea?
Thanks a lot for your help.

Hi,
there are sevaral SAP Notes for your problem. Can you specify the databaseof the source?
i.e. MS SQL Server -> Note 1212769
dbase -> Note 1209347
regards
-Phil

Error when making connection: You have an error in your SQL syntax;

I'm getting this error when trying to make a simple Database Connection:
SQLException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '????????????????????????????????' at line 1
SQLState: 42000
VendorError: 1064
I tried a different driver and got the same error with more "?"s in the "use near....." part.
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class DBTest{ public static void main(String[] args){ try{ Class.forName("com.mysql.jdbc.Driver").newInstance(); } catch(Exception e){ System.out.println(e); System.exit(0); } Connection conn = null; try { conn = DriverManager.getConnection("jdbc:mysql://localhost:3306/testDB?" + "user=root&password=password"); conn.close(); } catch (SQLException ex) { // handle any errors System.out.println("SQLException: " + ex.getMessage()); System.out.println("SQLState: " + ex.getSQLState()); System.out.println("VendorError: " + ex.getErrorCode()); } } }
MySQL Server Version:
Server version: 5.0.67-0ubuntu6 (Ubuntu)

cotton.m wrote:
c0c0 wrote:
I've tried Drivers 5.1 , 5.0 and 3.1 now and I get the same problem every time. I've tried switching databases, users, etc but always get this same error:
java.sql.SQLException: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '????????????????' at line 1
I have the latest version of mysql from the Ubuntu repositories. Do I have to configure that a certain way? It isn't the URL which I supply that it does not like because I've tried multiple URLs and they all give me the same error when I supply the correct information.
Any help is greatly appreciated.This is.. very odd.
I have to ask are you really, really sure that your code is just as you posted? Are you sure you aren't running a query of some sort? My guess at this point would be some sort of rather bizarre encoding issue. I'm sorry but I can't reproduce your behaviour, I am connecting to different MySQL instances with no problem from Ubuntu..
Yes the code is exactly the same as what I posted (except hiding actual usernames and passwords)
I've even tried to connect to a remote mysql server and get the same behavior (If I type in the wrong database it alerts me there is no db of that name, if I lg in with the wrong password it alerts me cant login ____ @ ______, when I have all the correct information I get that same old error) , I'm somewhat convinced it's my driver now. I thought at first it was the way I had mysql configured but now I think it's my driver or the way I have everything installed. I simply put the driver location in the classpath and do the command:
export set CLASSPATH=/usr/share/tomcat5.5-webapps/ROOT/lib/mysql-connector-java-5.1.7-bin.jar
Was this the wrong way to go about doing it? I'm not currently running tomcat I simply put it there because a book said that's where it should go for tomcat, but I wanted to first try this not running tomcat with just a simple normal Java example.

Error when creating connection with SSO Authentication mode

Hi All,
when I am creating the connection with Authentication Mode as SSO, I get error "Unable to connect to SAP BW Server User abc has no RFC Authorization for function group SYST".
When I am craeting connection with specific user id and Password it works fine.
Pls. let me know whats the problem with creating connection with SSO.
System Info: BOXIR.3.1 Sp3, SAP 7.1
Regards,
Nisha

Yes, I have installed Integration Kit, and configured the SSO.
I am able to login into designer with Authentication as SAP.
But, the Problem is with connection creation with SSo authentication mode.
Is there any property or role needs to be defined for the universe designer Group or user, so that SSO is allowed in authentication mode?
Regards,
Nisha

Low power error when W530 connects to dock station 433815U

Hi,
Just got W530 2447 and dock station 433815U. From Lenovo website, 433815U should support W530. I got error message said power voltage is lower than laptop needs when I connect W530 to 433815U with dock station adaptor(90W). Any BIOS configuration or drive I need to configure or install to be able to 433815U?
One thing I also wanted to mention is I tried combination W530, 433815U with W530 adaptor(170W), it works.
Thanks

you mean you are getting error when using the 90 watts adapter with the dock? If that is the case, there is nothing you can do, other than to use the 135 watts or 170 watts adapter.
Otherwise, you have a modified power cable, which is not a Lenovo recommended accessories.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

'iPhone previously synced with computer' error when I connect to itunes

I have a v1 iphone and yesterday morning upgraded to 2.01. That seemed to go just fine and I used it all day.
Last night the batter ran out and upon plugging it into the charger it seems as if the phone has been de-activated. I then connected to iTunes and received the message saying "An iPHone has been previously synched with this computer" and I chose to restore from my backup which seemed to work fine. I could use the phone no problem.
This morning I connected it to iTunes to move some music over and it gave me same "An iPhone has been previously..." message as before. So I'm restoring again, but I'm wondering what is up and if anyone else is experiencing similar issues

I also have been experiencing this issue since yesterday when I tried to upgrade to 2.0.1
Half way through installing the firmware update, my phone went nuts and kept disconnecting and reconnecting (hardware growler notifications) before throwing up an error (which I unhelpfully cannot recall now, but which I think was of the 0x800 'unknown error' variety). I cancelled the procedure and ejected the phone, before physically disconnecting it. Upon reconnecting, I was greeted with the same message as the original poster.
I went through the backup restore procedure successfully, but now every time I reconnect the phone to my computer it comes up with the same screen:
*An iPhone has been previously synced with this computer.*
*1. Set up as a new iPhone.*
*2. Restore from backup.*
I've been through the backup option at least three times now (takes an age) and each time I reconnect the phone I get the same message. I've rebooted my Mac, rebooted the iPhone, all to no avail. I'm very hesitant to try option 1 above, which I feel may solve the issue but I'll lose all the phone data in the process. I'm aware I could write it all down and re-input it, and some things, like my contacts, can just be re-synced from my Mac address book, but there's plenty of other stuff on there that is unique to the phone that I would not be able to get back on it easily.
If anyone has any insight on this matter it would be gratefully appreciated...
For the record I'm running an aluminium 20" iMac, Leopard 10.5.4 with an iPhone 3G.

I have a error when i connect to sql exprees 2012 with my application

hi
I have a application , its connected to sql server 2012 express
user name : sa
and i have a password
in my computer and our company's computer its ok
now
i setup sql server 2012 express in a customer's server
i setup my windows application in server ... its works good (local)
when i install my app in another network's computer i see my sql server & i selected my server and create a provider & i tested my connection string its ok
i have a succesfull connectionstring
but when i read records & ... i have a login failed server\ user
why ?
attention in customers' server have a sql server 2008 r2 for web
my database can't restore in 2008 r2
and any setting its same with my setting

There can be too many problems that prevent connecting to the database. I suggest you get back with more information when you will have it in order to save us from guessing game :-)
Don't worry we will be here to help tomorrow too (some of us probably) :-)
[Personal Site] [Blog] [Facebook]
We Iranians do not like insult to others.
good luck
Hello Reza,
I would like you to take answers in lighter way.As far as i can see there was no insult there Pituach just ( with simley) tried to tell you that such a error could be because of many reasons and please can you provide more details.
SQL server forum includes people from all around world and only thing matters here is knowledge.
Hope this helps
Thanks for cooperation
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
hello Shanky_621 & RSingh
& pituach
sorry , You are right
i deleted my post

LDAP over SSL gives an error when testing connection in RPD

Hello all,
I got something strange. When I configure OBIEE to use an LDAP server (ADSI) it just works fine.
Now when I change the port number and check SSL and I check the connection again it says:
[53016] The IBM LDAP SSL (Secure Socket Layer) client library initialization failed: Reason: Bad keyfile password
But now when I log on to OBIEE with an AD user it just works...
Anyone with the same problem/issue?

On Sun, 23 Feb 2014 08:23:40 +0000, GreeMann wrote:
I believe my main problem is that I can not issue any template I have tried other template but I get the same permission error I have tried different account I get the same permission error, is there any way that we can change the default template permission.?
You have not followed the instructions I gave. As I've said in previous
posts, the way you've got this template configured is never going to work
as it is configured to build the subject information from AD and one of the
attributes being included in the Subject Alternative Name is the DNS. Since
you're using a user account to request the certificate when it attempts to
build the subject alternative name it is trying to add the user's DNS name.
A user account does not have a DNS name.
I would suggest that you delete any custom templates you've already created
and start over again. As per one of my previous posts:
http://technet.microsoft.com/en-us/library/ff625722%28v=ws.10%29.aspx
Follow the instructions in the Using the Certificate Enrollment wizard with
an enterprise CA section.
If you don't follow the instructions I've given you, I can't help you.
Paul Adare - FIM CM MVP
Of all the things I've lost, I miss my mind the most.

Malfunction error when I connect

Similar Messages

Maybe you are looking for