Malfunction screen

Hi,
There is a problem with the screen of my MacBook Pro. At an specific angle, the screen becomes blank with some grey lines and an odd right corner appearance. When it happens I can turn off the computer normally, I press the shoot-down bottom and then the enter one, as if I could see the shooting-down window... When I turn on the computer the screen remains white, so I wait for the time it normally takes to start completely and then I turn it off (as I did before). So then, I close the screen and wait some minutes to open the screen again and turn on the computer, after that the screen appears to work fine, but if I change it's angle position it becomes blank again.
Does anyone have the same issue?

Hi mohand,
As I understand you are facing an issue with Display on your HP Pavilion g6-2160se Notebook PC please click on the web link given below should be able to help you understand the issue.
Resolving Problems with Notebook Displays (Windows 7)
Kindly look into the module Image on screen flickers, has lines or distorted colors
If in case your notebook is still under warranty, contact HP and arrange for replaced of Display - you can check your warranty status Here.
In case the unit is Out of warranty you can get the display fixed on a charge by HP or use a External Display to resolve the issue.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
* Click on "Purple Thumbs up" button to the left side of my post to say thanks!
Regards
Ahmed

Similar Messages

Iphone6 death screen red whit infinite rebooting?...anyone?

I phone 6 16g
malfunction
screen going red sudenly following by unsuccessfull rebooting
tried all reset
erased all content and setting
nothing help

Howdy serrero,
Welcome to Apple Support Communities.
The article linked below provides information and troubleshooting tips that’ll help you resolve the red screen at start up issue with your iPhone 6.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Take care,
-Jason

My screen has went blank

i have an N80 and i know the buttons and phone still function correctly but my entire screen in blank...it goes white as soon as i switch it on.
without being able to see the screen i cant use the phone.
has anyone any suggestions?
regards
john

a no data screen is usually an indication of busted " malfunctioning" screen, or a problem with the flat connectin between the screen and main board. both are hardware problems that require a visit to a nokia care point for replacemnt.
Fear not those who argue but those who dodge

Can I use an external monitor/clamshell mode PERMANTENTLY?

What I'm trying to do is take my old TiBook 550 with its malfunctioning screen and busted hinges (grrrr) and effectively turn it into a low-budget version of a Mac Mini i.e. hook up a USB keyboard and LCD monitor to it and use it as if it were a desktop.
Now I have successfully attached the monitor and keyboard, turned on video mirroring etc. and it's all working fine. No problems with getting the thing to work. The only problem is I am having to keep the PB screen open slightly so that I can shut down and boot up for each session (for various reasons I don't want to leave it in sleep mode). Even though I bought a keyboard that has a USB power button on it, I am still unable to use it to boot up (I can shut down though).
As I understand it 'clamshell' mode only allows you to put the computer to sleep, so is there any way I can permanently tell the PB to ignore the on board LCD and only use the external display? My ultimate goal is to just have the PB sitting out of the way, lid closed (or lid removed??), whilst I use the keyboard and external display PLUS be able to shut down and reboot without having to prise open the screen, which is now quite damaged. Any ideas? TIA.
Powerbook G4 15 1.5Ghz Mac OS X (10.3.8)

Hi there,
I think you're right - Shutting down works via the keyboard but not Boot Up. It's weird because I'm sure I remember being able to do this once in the dim and distant past but maybe I'm wrong.
Anyway I've now hooked up my old laptop so that the screen is held ajar so I can reach the power button. After some research, I found out that the laptop should not be used with the screen closed for long periods anyway because of heat issues so this inelegant solution is probably the best in terms of keeping the temperature down.
Now what I need is some safe way of permanently disabling the display so that ONLY the external monitor works. If there was some way of doing that, at least I would not be wasting energy powering the original LCD. So far I have been able to disconnect the cable on the back of the screen that sends the 'data' to the LCD, but I've not yet been able to disable the back light.

Iphone repair in another country

I bought my iphone5s 4 months before I left Australia to work in China, I won't be back until June 2015. Now my phone is dead due to the malfunction screen. What would be for the warranty, can I get a replacement in China? or I have to wait for another year to come back to Sydney to get a replacement?

The warranty on an iPhone cannot be transferred to another country, it is only valid in the country of sale. There are only the options of buying a new iPhone in China or sending the non-working iPhone to someone in Australia who can take it to an Apple store genius bar and have it service or replaced.

Can you still get store credit for non-Apple repaired phone?

Hi all,
My brother has an iPhone 5 which recently has a malfunctioning screen - it is out of warranty so replacing it will cost $250. My family is thinking of switching over to a different carrier and we were planning on returning our iPhones for Apple credit. I was wondering if I were to get a non-Apple certified replacement screen, would I still be able to return the phone for Apple credit? Or, if I were to go ahead with the $250 replacement, will I still get the full credit on the iPhone 5 back (valued at $375)?
Thanks!

Some US Apple stores are now able to in-store repair iPhone 5-series devices...teh price for the screen is $149. Check with your Apple store to see if they can do the repair.

MBP crashes after waking up

Recently (june 2008) I've had to take my MacBook Pro to an Apple shop in order to fix a malfunctioning screen (http://discussions.apple.com/thread.jspa?threadID=1591913&tstart=0).
After I got it back a week later (with a new logicbaord) everything worked as expected, except 'waking up from sleep' (to clarify, closing the lit of my MBP and opening it "30 mins >" later).
This crashed my MBP 99% of the time. Apart from not responding, the dock, menu bar and windows looked corrupted.
Like this:
Image:
Sometimes 'killall dock' from the Terminal seemed to help, but usually a hard reset was required in order to continue using my Mac.
I've searched the web, and I've tried the following attempts to resolve the problems:
- Reset PRAM cache http://support.apple.com/kb/HT1379
- Reset the dock by removing the com.apple.dock.plist file http://discussions.apple.com/thread.jspa?threadID=1304640&tstart=0
- Complete system reinstall using a Time Machine backup (restored my profile)
- Make MBP goto sleep without network shares or any network connections enabled
- Make MBP to sleep without any running apps (like Mail, iTunes etc)
The above items did not fix my problem. I then created a new 'blank' account on my system. When logged in as the 'new' user the system would not crash!
So, it's safe to say smething within my current profile makes my machine crash.
Does anyone out there have any tips or solutions to the problem?
Cheers,
Gijs

I've downloaded the demo of Leopard cache cleaner and performed 'Light cleaning' of all caches (Local, System and All users).
It rebooted my system and after booting, logging in and checking my mail, I closed the lit.
This morning I opened the lit and expected another crash.
Great news, it didn't crash!!
Conclusion (so far) it's most likely not a hardware error, but somewhere along the line something had gone bad and corrupted a cache file.
Thank you for your time and effort.

Blue Screen of Death and USB malfunctions on HP Envy running Windows 7

Hello.
I have an HP Envy 14 notebook PC. It's running Microsoft Windows 7 Home Premium 64-bit, version 6.1.7601. When I run it, I eventually starts getting an error message from the right of the desktop toolbar telling me that a USB device I plugged in is malfunctioning and did not get installed correctly. This is happening while my USB ports are empty.
As this is happening, the computer also starts playing background static that you can hear over headphones as well. This sound goes away once you mute the machine. After plugging the computer into a monitor to play sound through its speakers, there is also a curious effect; after I remove all the cords and plug in earphones, I hear amplified booming sounds from small movements, rather than what is meant to be playing. This latter effect goes away once I restart the computer,
Eventually, the computer displays a blue screen and crashes. The blue screen asks me to disable BIOS memory options such as caching and shadowing. Once the machine restarts, it informs gives me the following report:
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   fe
BCP1:   0000000000000008
BCP2:   0000000000000006
BCP3:   0000000000000005
BCP4:   FFFFFA800A8577A0
OS Version:   6_1_7601
Service Pack:   1_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\021212-92680-01.dmp
C:\Users\Kristina\AppData\Local\Temp\WER-187341-0.sysdata.xml
It also gives me the option to check for solutions. Doing so closes the screen and gives no further information. Please advise as to how to address these issues.

I have the same issue you have had. This happend to my old hp, I thought it was a fluke so when I bought my new hp envy a year ago I was dumbfounded to see that its happening all over again. This time my hp envy 14 is doing the same thing yours did with the same code and all. Can you please tell me what you did to fix this or were you even able to fix it at all?

How do I troubleshoot a blue screen on a Pavilion dv4-1123us with "hardware malfunction call hardware vendor for support" message?

I keep getting this screen and before I have to call and pay and wanted to see if there was something that I could do.
Pavilion dv4-1123us get blue screen with "hardware malfunction call hardware vendor for support"
This question was solved.
View Solution.

I would say its just a conicidence and recommend you to do a system restore. As its an intermittent problem, you never know if you face same issue once again.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Windows Help and Support screen glitch? And keyboard malfunction! Help!

I have 3 problems. At the log in screen of my hp stream notebook 11, I wasn't able to complete my password due to a malfunction in one of the keyboard keys. I shut down the computer and came back later to try again. It worked but when I logged in, the Windows Help and Support screen kept repeatedly popping up even when x'd out. I would let it repeatedly pop up (like a glitch) and I would x it out and it would go away. Also as I was typing in anything (wordpad, internet, search), every other key letters and numbers were acting as shortcuts to different screens such as apps, the log in screen, control panel etc. then the Windows Help and Support screen would pop back up again as a glitch. Please help!

Hi @aaliyah22
Welcome to the HP Support Forums!
You mention three different issues, and I am happy to assist with this. Obviously we need to start with the keyboard. As it is just the one key you describe as a problem, I would try a cleaning. You could see if some compressed air helps first as some debris may have gotten into it. Also you can look at these two pages and see if anything helps.
Notebook Keyboard Troubleshooting (Windows 8)
Cleaning your Notebook PC
The other two problems sound a lot like something like a software or possibly a malware related issue, but you can start with trying a system restore to a point before the problem began and see if that helps.Using Microsoft System Restore (Windows 8)
Then take a look at these.
Resolving and Preventing Viruses on Your Computer (Windows 8)
About Spyware, Adware, and Browser Hijacking Software
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

U150 keyboard malfunction after changing screen, = repeating, few numbers not working

Hi!
I changed my cracked U150 screen on my own (warranty is passed). I thought it worked fine on test boot before attaching the bezel. I aborted the test boot (as the instruction video said to do), and put on the bezel with some difficulty (it's a tight fit on the bottom of the screen around the hinges).
The next boot up failed, which I've never seen before. Got a bit worried, as it wanted me to try recovering to a set point (several weeks prior). Opted to just turn off and back on, and it seemed to work...EXCEPT now a few keys on the keyboard malfunction. Esc, `, 5, 6, 0, ) and Delete all type their character and then immediately type an = which repeats. The actual = button does nothing: types nothing. In caps, the keys do the same thing, but of course type a + which repeats. F5 also does it, and I'm not sure about other F keys because I don't want to do some function that will shut down my typing right now!
U15============ 0========= )+=========== When I press any other key, the repeating equals stops, of course...
When I boot up, the computer beeps repeatedly as if a key is repeating in error, so something in startup must use one of those keys and causes the same issue: since I don't actually press any key on bootup, does that indicate it's more of a software problem than a hardware problem?
I've taken off the screen bezel again (a real pain and not a good repeated activity because I typically break one tiny plastic clip each time no matter how careful I am) and no change. I see no keyboard cable anywhere near the screen or cover or hinges-just WLAN cables and the camera. I did not spill anything on the keyboard and it worked totally fine until I replaced the screen. Online info about Lenovo S or Y series seems to show the keyboard cable down low, so again, not near the screen. The screen website (laptopscreen.com) folks had nothing to say that helped. My search online shows nobody with a similar experience.
There is no Lenovo keyboard driver on the Lenovo site, so I don't see that uninstalling and reinstalling the driver would make a difference: besides, how do I reinstall a keyboard driver if I can't use the keyboard once I've uninstalled it? Is the mousepad enough to reinstall?
So, I would be ever ever so grateful for any help/ideas. What's my next step: taking out the keyboard to see if the cable loosened, even though I went nowhere near the cable??
Thanks!!

So it's been a while, but these things can drag out in life...now my brain is starting to adapt to the change, and that's annoying, so I'm back at trying to fix this.
I tried safe mode, and the problem persists. I tried returning all my startup options to default, and it persists. I previously had returned to a Restore Point before the problem, and that didn't fix it.
Today I was going to look at the keyboard cable, but getting the top off is proving to be difficult and since I can use the machine as is, even if annoying, I don't want to go there yet. Besides, there is no reason for this to be a hardware issue:
I aborted a bootup by pressing and holding the power button.
Next bootup failed, and the machine asked me to restore to a previous Restore Point.
I turned off the machine again instead of restoring, and ever since then I've had the keyboard problem.
I tried uninstalling the keyboard and restarting computer so the driver reinstalls, and that didn't fix it.
I plugged in an external keyboard and that worked fine.
I am now wondering about using Linux to get at the problem.
Any ideas? I totally appreciate how active you are on this forum, and all the folks you've given advice to. You are making computers work for people: thanks!!
Tamarinda

IMac Screen Malfunction

I have a 24" iMac which I bought in late 2008 and tonight the screen malfunctioned... has anyone seen this before and is there a solution?

amybish wrote:
I'm in Sacramento... also, I adusted the screen calibration about a week or so ago - do you think that might have contributed to this?
Doubtful. Well in the Sacramento area you have 2 Apple Stores available and several AASPs to choose from. Get your quote, then you can decide what to do from there.

My trackpad seems to be malfunctioning. Cursor jumps around. Screens shift.

My trackpad seems to be malfunctioning. The cursor jumps around and doesn't always respond. The screen shifts from one to another involuntarily. Does anyone have an answer to this problem?

Portables and Magic Trackpad: Jumpy or erratic trackpad operation
Does this occur with the power adapter connected, disconnected, or both?
Check your battery status. A battery that reaches its end of life may swell, creating pressure beneath the trackpad that will result in the symptoms you describe.

HT201412 Restore did not work.The ipad mini says it is disabled, connect to itunes.When connected, it says that it is locked! After Recovery/Restore completed, device still malfunctions. The slide image keeps dancing around the screen.Device types on its

What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????

Maybe a reset would help, to be followed by trying the recovery again.
To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Then do the recovery.
If this doesn't solve it, I recommend visiting an Authorized Apple Service Center.

Malfunction screen

Similar Messages

Maybe you are looking for