Malfunction
Bridge malfunction - requests purge cache. Try to purge,Bridge freezes. Updated from CC, still frozen, showing "building criteria" for eternity. Ideas?
Given that I can get a refurbished phone because it is under warranty and I
have the basic verizon insurance (I missed the higher up insurance
deadline) I would take mine and the sent in phone to verizon to have it set
up or how does that work? I'm not trying to be a bother, it just really
sucks not being able to use a almost brand new phone because a defect.
Similar Messages
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
Blue Screen of Death and USB malfunctions on HP Envy running Windows 7
Hello.
I have an HP Envy 14 notebook PC. It's running Microsoft Windows 7 Home Premium 64-bit, version 6.1.7601. When I run it, I eventually starts getting an error message from the right of the desktop toolbar telling me that a USB device I plugged in is malfunctioning and did not get installed correctly. This is happening while my USB ports are empty.
As this is happening, the computer also starts playing background static that you can hear over headphones as well. This sound goes away once you mute the machine. After plugging the computer into a monitor to play sound through its speakers, there is also a curious effect; after I remove all the cords and plug in earphones, I hear amplified booming sounds from small movements, rather than what is meant to be playing. This latter effect goes away once I restart the computer,
Eventually, the computer displays a blue screen and crashes. The blue screen asks me to disable BIOS memory options such as caching and shadowing. Once the machine restarts, it informs gives me the following report:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: fe
BCP1: 0000000000000008
BCP2: 0000000000000006
BCP3: 0000000000000005
BCP4: FFFFFA800A8577A0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\021212-92680-01.dmp
C:\Users\Kristina\AppData\Local\Temp\WER-187341-0.sysdata.xml
It also gives me the option to check for solutions. Doing so closes the screen and gives no further information. Please advise as to how to address these issues.I have the same issue you have had. This happend to my old hp, I thought it was a fluke so when I bought my new hp envy a year ago I was dumbfounded to see that its happening all over again. This time my hp envy 14 is doing the same thing yours did with the same code and all. Can you please tell me what you did to fix this or were you even able to fix it at all?
-
IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"
Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.
I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!
-
Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
Anything known on this issue? Solutions? Even importing files from memory card is a problem.
In import window images are not diplayed as images but all the same blue mini images.
vertical files are changed into landscape positions and more. Mac version.
cj de vriesOp 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
created by Yammer in Bridge General Discussion - View the full discussion
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
THNX Problem solved -
IPhone malfunctioning while incoming calls
Hi Everyone,
Recently whenever I get incoming call suddenly music player turns ON.
Also sometime when I'm listening to music, song shuffle itself.
It's really bad experience with apple.
Voice control turned off.
Songs shuffle turned off.
Please let me know is there any malfunctioning in my iPhone or is there any settings need to be changed (recently I havn't changed anything)
Thanks,
SriDid you already try to reset the phone by holding the sleep and home button for about 10sec, until the Appel logo comes back again? You will not lose data by resetting.
If this does not work, set it up as new device again, explained here:
How to back up your data and set up as a new device -
I keep getting this screen and before I have to call and pay and wanted to see if there was something that I could do.
Pavilion dv4-1123us get blue screen with "hardware malfunction call hardware vendor for support"
This question was solved.
View Solution.I would say its just a conicidence and recommend you to do a system restore. As its an intermittent problem, you never know if you face same issue once again.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
Random restarts, Software malfunction? Error message.
Hi everyone!
I would like to ask for your help. My MacBook Pro started the have a malfunction about 1 month ago.
It has been randomly restarting by itself. As you can imagine this can be very annoying when you are working on your projects.... (saving every second)
So basically I brought my mbp to an apple store where they ran all the hardware tests. They said it was the Hard Drive so I bought a brand new hdd and replaced it by myself, reinstalled the system (mountain lion) without a problem. BUT A day after, when I fully copied al my documents from the hard drive I had before (wasn't damaged physically) the restarting started again.
I would highly appreciate if anyone could advise me what to do... since I changed the hard drive and apple said there are no hardware problems.
After all the restarts (there were a lot) I always got an error message which is the following:
Interval Since Last Panic Report: 37551 sec
Panics Since Last Report: 11
Anonymous UUID: 65BC4D9A-9BB5-534A-0CDA-B688524AAC0C
Tue Sep 23 16:03:51 2014
panic(cpu 0 caller 0xffffff7f947f6f1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff808f2f1000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff808e3bb710 : 0xffffff801261d626
0xffffff808e3bb780 : 0xffffff7f947f6f1a
0xffffff808e3bb850 : 0xffffff7f92d5ff1e
0xffffff808e3bb910 : 0xffffff7f92e3412d
0xffffff808e3bb950 : 0xffffff7f92e3418e
0xffffff808e3bb9c0 : 0xffffff7f930faed0
0xffffff808e3bbaf0 : 0xffffff7f92e5ca75
0xffffff808e3bbb10 : 0xffffff7f92d66d50
0xffffff808e3bbbc0 : 0xffffff7f92d647d0
0xffffff808e3bbdc0 : 0xffffff7f92d65845
0xffffff808e3bbea0 : 0xffffff7f92d010a4
0xffffff808e3bbef0 : 0xffffff7f947ba0df
0xffffff808e3bbf40 : 0xffffff7f947b91e7
0xffffff808e3bbf60 : 0xffffff801263e25e
0xffffff808e3bbfb0 : 0xffffff80126b3137
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f947e9000->0xffffff7f947fbfff
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[1D0BB11E-7D71-34CF-ACC3-57DF01CADA 08]@0xffffff7f947e4000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f947d0000
dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f92be8000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f92cea000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f92ca7000
com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f92c fe000->0xffffff7f92fa3fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f92cea000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f92ca7000
com.apple.nvidia.nv50hal(8.1.2)[988EAF3A-3318-3787-8A5A-844830FA1522]@0xffffff7 f92faf000->0xffffff7f93283fff
dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f92c fe000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
com.apple.driver.AGPM(100.12.87)[621C8E31-07A5-38AC-95C9-F600FA62270B]@0xffffff 7f947b8000->0xffffff7f947c7fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f92c68000
dependency: com.apple.driver.IOPlatformPluginFamily(5.3.0d51)[7B50B447-FF44-3529-9505-3F49C F1CCB4F]@0xffffff7f9371e000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f92cea000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f92ca7000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x0000000012400000
Kernel text base: 0xffffff8012600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 4414805088952
last loaded kext at 1784078608355: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f94906000, size 16384)
last unloaded kext at 1857495295190: com.apple.driver.AppleUSBCDC 4.1.23 (addr 0xffffff7f94906000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.1.4f2
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.87
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.GeForce 8.1.2
com.apple.driver.AppleIntelHDGraphics 8.1.2
com.apple.driver.AppleIntelHDGraphicsFB 8.1.2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleMuxControl 3.4.5
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.6.1b4
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.4f2
com.apple.nvidia.nv50hal 8.1.2
com.apple.NVDAResman 8.1.2
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IO80211Family 530.4
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.6.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: HGST HTS721010A9E630, 1 TB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
Message was edited by: D0n0lierD0n0lier wrote:
Hi, thank you. I brought my computer to an apple store genius bar already and they said there is no hardware problem.
They said, they have no personnel to read the kernel panic... I'm in France.
Then you went to a store that does not seem to have qualified personnel. This is the extract from the kernel panic report that clearly indicates the GPU issue:
Whether your HDD has a problem is a separate issue, but there is no indication here that there is a HDD problem.
Ciao. -
It took three attempts to download Mavericks because the first two downloads stalled for hours (overnight in one case) and so I aborted them, let the laptop chill out for a day, and then tried it again. The third time seemed to work like a charm. Everything operated beautifully for about a day. Then, for some inexplicable reason multiple apps began to malfunction. iBooks, Preview, Dictionary, the App Store app, the iWorks 13 software I'd just purchased and downloaded, and Maps fail to launch. I'll click on them and they'll bounce for a second in the dock then just shut down. I can pull up Mail and see all the messages in my inboxes, but when I select one to try to read, the email just appears as a gray box and then the entire app shuts down. Four notifications for the app store had popped up, so it's possible there are new updates that would resolve some of my problems, but since that app also closes itself immediately I can't run them. All the non-native Apple apps, like Microsoft Office 2011, work perfectly still.
This is a 2011 Macbook Pro that has been babied. The only thing unusual about it is that I'd had an insane amount of email, but there is plenty of free space.
Does anyone have any suggestions for possible resolutions? Should I try to revert to Lion? The only negative to that is the newest iWorks will only work in Mavericks from what I understand. (I might be mistaken)
I'm not very knowledgeable about computers at all, unfortunately. I did open up Disk Utility and ran a verify and repair disk and permissions. That did not resolve any of the problems. The only issues that popped up were ones relating to a printer I used to use. I'm running Avast! right now. I have no idea whether that could help in the slighest. As I said, I'm not the most tech savvy person. Please, tech clever people, help if you can!Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
Some users have reported an SMC reset to be beneficial. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
Hi all,
I am not able to drilldown to lowest level of my dimension. There is no actually error message and only thing that remains forever on the screen is " Searching... To cancel, click here.". I have found connection between number of used filters and this malfunction... If I select filters from (any) three different dimensions or less then three dimensions everything is fine and drilldown is working properly. In case that I have filters from more than three different dimensions problem is back so please tell me...
- Is there any place in configuration files where number of drill levels are defined?
- Is there maybe limited number of filters that I can use per request?
Platform: Oracle 11g, OBI EE 10.1.3.4
Many thanks in advance!
MarkoHi,
Did you manage to get drilldown functionalities working in XML Publisher ?
Tks and Regards -
When I connect.. sometimes it says Device not recognized or malfunctioned!
Hi. When I connect my ipod to any microsoft device, sometimes my ipod doesnt connect. I cant charge it, or restore it as it behaves like a useless piece of plastic.. I get a yellow bubble 'Device not recognized or has malfunctioned'
This problem is bizarre! I cannot find anyone who actually has a solution for this problem! Apples standard answer is for me to reinstall my drivers or update itunes or windows. Done it. No solution yet.
My ipod works fine.... sometimes. Its a completely unpredictable problem. Ive googled this problem and so many ipod classic owners have asked.. solutions ive tried: the 5r's, updating drivers, It managed to connect once, but now it wont. My ipod normally works fine on my PC, XBOX, laptop and Mac.. but sometimes, unpredictably, it wont be recognized by anything apart from the mac. For a month it would not connect at all and I took it in to an Apple store where they told me it works fine. Its not my PC.. its up to date, and theres no reason why it doesnt work on my XBOX because some times it does.. last night it did, today its broken again, I suspect tomorrow it may work. This is SO frustrating!!
I have alot of experience in PC's and normally I can solve a problem by process of elimination, updating and reinstalling, but in this case.. everything seems fine. My only idea is that maybe its my Sync cable?? Which also makes no sense because it generally connects fine on the mac - and, why would a sync cable be unpredictable.. surely it either works or it doesnt. HELP PLEASE!!
Nick.
my email is: [email protected]
my serial for my 80g classic is 8K819CPKYMV and is under warranty until May 2009, i bought it in August this year.there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit. -
How can I replace a brand new, but malfunctional iPhone 4?
Hey, guys.
I am from Russia, and on our recent trip to Munich, Germany we've bought a new iPhone 4 8gb for my wife at the Apple Store. When we got home in a couple of days, I unboxed it, plugged in and proceed to install iOS6 wirelessly. On the next day we went to the carrier office for a local microSIM, and my wife started to use the phone. But suddenly we've discovered that it won't last even a half of a day: while charged up to 100% overnight, it dropped to 80ish in about two hours, and after dinner break it was already way below 30-40 percent only to discharge completely at 5 or 6 pm.
And all this while every 3G, WiFi, BT, geolocation or even cellular data is turned off. She just made a couple of calls, so all other time it was in standby. I saw this myself in the evening, you can hold it in your hand and literally look how battery percentage drops one by one. Also the phone is getting hot while screen is lit and extremely hot when it charges up.
We don't have an Apple store in our country, so I can't get any official support. I can't contact Russian Apple support by phone, because it redirects me to carriers' support and they can't do anything. I didn't find any e-mail address to write to. I started digging this forum and found similar problems in regard of some kind of a bug in iOS 6, as well as some solutions, none of which were working. For instance, I wiped the phone completely, restoring only contacts from icloud and disabling everything power-consuming I could find. Sadly, it didn't help.
So, I decided to give it to local service for some diagnostics. They ran it and results came back: phone is malfunctional because of some serious internal issues like abnormally increased voltage from the battery, bent microboard, slightly melt components and so on. They said it is beyond repair and is only subject for replacement or disassemble for spare parts. All this with a brand new device.
You can imagine my frustration. We don't have any financial means to travel back again just to replace it, nor can we send it over via postage service. The only reasonable solution would be to transfer it back to Germany with a random friend, but I am not sure if it is possible to make a replacement, becuase I've paid for it with credit card and there is my name on the receipt.
So, the question is, what should I do? Is there any way to replace it without my personal presence in the store; can it be done by someone else? And if not, can a friend just give it back, and they would refund it to my credit card? Also, is it mandatory to return it exactly to the same store, or any store in Europe can take it?
I would really appreciate if someone with a silmilar experience would elaborate on the solution. Thanks in advance!Thanks very much for your reply! I have a Genius Bar appointment today maybe they can test the phone to see if they can determine whether or not it is defective.
Thanks Again!
CS -
Help. I have Creative Suites 5.5 on my MacBook Pro. Unfortunately, I had a major malfunction and must reformat the disk. How do I transfer Creative Suites to my desktop if I can't locate the programs booting up from my startup edrive?
http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Mylenium -
i have the blue scrren of death on my iphone 4s due to the ios7 software malfunction which i am not happpy about. my icloud will not let me log into it which s making e frustrated. i am reciving a new phone but i am worried about losing my contacts how can i see if i can retrevive them once i get a new apple devce please someone help me.
Go to icloud.com from your computer and sign into your account. Any iCloud data you see there will sync to your new phone when you sign into your account.
Also, if you have a recent backup of your phone, restore that backup to your new phone when you get it to transfer your data, settings, apps and other purchased media. More details here: http://support.apple.com/kb/ht2109. -
Useless support if your software malfunctions. So am i supposed to buy the software again?
se visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
General Info
Chat start time
Jan 23, 2013 10:36:58 AM EST
Chat end time
Jan 23, 2013 10:59:23 AM EST
Duration (actual chatting time)
00:22:25
Operator
Gokul
Chat Transcript
info: Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 40 second(s) or longer as there are 1 customer(s) in line ahead of you.
info: You are now chatting with 'Gokul'
Gokul: Hello. Welcome to Adobe Technical Support.
Donna: Hi Gokul, thanks, can you help me with the issue i just described?
Gokul: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Gokul: I understand that you are unable to create greeting card of your wish measurement using Photoshop Elements 11.0, is that correct?
Donna: Unable to create a greeting card.... something is wrong with the software... updating didnt fix it.... tried upgrading to 11 but there is an error on your site.
Gokul: Thank you for elaborating the issue.
Gokul: I will be more than glad to check and help you with that
Gokul: May I know the serial number of the software?
Donna: I dont know, its a download... how do i check
Gokul: The serial number will be located in your email if you have downloaded the software or on the reverse side of the box if you have shipped the box to you and the serial number is a 24-digit long number.
Donna: Ill check but i dont know if i kept that email.... isnt available under my adobe ID?
Gokul: I do not see serial number registered under your e-mail address.
Donna: I found the order number...
Gokul: It is not valid order number.
Gokul: May I know from where did you purchase the product?
Donna: Adobe store Southeast Asia... can i send you a photo of the order confirmation?
Gokul: May I know the e-mail ID which you have used to purchase the product?
Donna: It doesnt say on the form but the only two i ever use are
Donna: It also says on it that Digital RIver, Internatinoal SARL is theauthorised reseller and merchant of the products and service offered within this store
Gokul: Sorry, you need to contact the reseller from where you have purchased the product to get the serial number.
Gokul: Please contact us back with the serial number of Photoshop Elements 11.0 to get better assist.
Donna: No, adobe owns this product and i need it to work. i am not going to search for some stupid distributor. please let me talk to a manager.
Donna: Im in asia, and i spend my money on original software rather than pirated versions and this is the service i get!!!
Gokul: Do not worry.
Gokul: I retrieved the serial number from Digital river for you.
Donna: not for me .... for adobe
info: Your chat transcript will be sent to
Gokul: I see that the serial number is for Photoshop Elements 10.0 and Premiere Elements 10.0.
Gokul: May I know if you have Photoshop Elements 11.0 serial number?
Donna: thats what i said Elements 10
Donna: I dont have the serial numbers.... they were not on the form.
Donna: Maybe adobe either needs to take this up with their distributors or make sure that it can be found somewhere in the software itself
info: Your chat transcript will be sent to
Gokul: Donna, the chat support for "how to issue" is available only for current version product which is Photoshop Elements 11.0.
Donna: also would be good if i could send screen shots in the chat
Donna: that is adobes problem not mine. I paid for 10 before 11 came out... so, what do i just can the software and lose a couple of hundred dollars?
Donna: there is a malfunction here that is not user created.
Gokul: I'm sorry to inform you that it is an old product and this technical chat support handles issues for the current shipping version of the products.
Gokul: Chat support or Phone support is limited to the current shipping version.
Gokul: And your product does not fall under the chat support boundaries, so I request you to visit the forums for a solution.
Gokul: You can even contact the phone support and purchase contract to get support via phone.
Donna: sorry to say, but i think you just convinced me that i should just buy the pirated version
info: Your chat transcript will be sent toHi Donna,
I think it would be good if you exactly explain the issue you are facing. May be we can help you.
Thanks
Andaleeb -
I Need a PC Detective for..The Strange Case Of My Malfunctioning DVD RW Drive: IT WILL NOT EJECT!
I can't get this drive to spit out my disc and quit saying error code: There are no factual errors.
Here is the play by play summary list regarding my pc's vital stats, events that occurred just Before the problem happened, what happened During the time and right After the strange malfunctioning of my DVD RW Drive.
BEFORE:
My DVD RW disc drive is malfunctioning on my Acer all-in-one desktop running a new install of win 7 ultimate x86. I was in the middle of labeling a handful of blank title DVD's by looking at the content on them.
I stuck in the first no label CD to jar my memory. When I did realize, I ejected it, wrote on the top, then went to the next DVD and did the same. When I loaded the 3rd DVD in the DVD tray, I wasn't sure what was on it. I saw 3 files labeled photos, templates,
and back up. upon further inspection I realized the content I was looking at was off my off my old palm pilot. I clicked eject. BUT...
DURING:
...at the exact moment I click eject a I got a double bubble notice that tells me Adobe has a important update and Windows has important updates too. OK, so I approve the updates. Adobe was fast... Windows takes awhile and says I can continue doing what I was
doing while the updates occur.
AFTER:
I go back to my DVD Drive project. I figured the timing was bad that's why my disc didn't eject, and so I right click to eject my DVD again. This time the notice says "Please insert disc in the drive". WHAT?? So I start a series of mouse clicks to
reload the contents i just read from the disc of old palm pilot info, and it was still all gone. The drive reads nothing is inserted aka the drive is empty. OK But I still cant eject my disc either. Frustrated by the obvious fixes not working I eventually
do reboot my PC to start fresh, and now I see my palm pilot info displayed on the disc that's in the DVD RW drive: I click on a folder to see the contents just to make sure I can. AND I COULD. Then I try to eject it and the same BS happened again... Error
code: 0x80070057 / Path: unknown / Source: Catalog - OK OK to spite the fact this error code has no indication that it applies to my DVD RW issue so.. whatever, I try to see if my contents still appears, and it does. I again try to eject
and it pops up error: "again please insert a disc into the drive" so I check again to see my content and again it's also gone.In my Device Manager everything is fine and says working correctly?
LAST: I make my way to the Microsoft Support run the DVD RW "Fix-iT" tool. Before that I ran a internal diagnostic with the tools in my OS.. I read the help section, I did all the obvious things I could think of. I can't afford not to have
my Drive working, I need to install some programs. PLEASE CAN YOU HELP ME?Hi,
According to your description, maybe the disc is damaged or the disc is compatible with the drive. Since you cannot eject the drive,
you can update the drive to see if the issue persists. Maybe the issue is due to the hardware of the
Disk Drive, you can contact your computer’s vendor for assistance.
In addition, since it is related to windows 7, maybe you can ask in the Windows 7IT Pro forum below for further assistance.
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Best regards,
Susie
Maybe you are looking for
-
I have a project that i am working on. I can compile and run fine on my laptop(where I am working on the project) which used vista. But when I compile and run on my desktop, which used windows 7, I get exceptions thrown that arent thrown. They both h
-
Integrating Tableau server report with SharePoint
Hi The requirement is to have Tebleau server report to be integrated with SharePoint. We can integrate the report using a page viewer web part but in the web part it asks for log in credentials, also Tableau server is installed on a different server
-
How do i update to snow leopard or yosemite from macintosh
How do i update to snow leopard or yosemite from macintosh
-
How to fix my phone its stuck on the itunes and charging cable screen...? Iwas trying to update to io6.1 it said i needed to update it.
-
Hello SAP Gurus! I have a problem I hope you can help me with. We are running on version 4.6C and use Vertex Q Series 3.1. We have a user in the field that is trying to reject a line item on a sales order, but when doing this they get error message