Malicious user (troll) is sending out my Skype name on Omegle - Help needed
Hello, people! I am loving Skype, but I have an issue. Recently, a user with malicious intent entered one of the group conversations I'm in on Skype. This user then proceeded to copy all the usernames of this group's members. This user has programmed a bot that sends out those Skype usernames on a site called "Omegle". This has resulted in loads of unwanted contact requests for all people involved, and it is rather frustrating. I can provide the username of this user if required, but have decided against posting it in this thread because of privacy concerns. I was wondering if any steps could be taken to eliminate this issue. Unfortunately, I am aware that this problem may be out of Skype's reach. I have also sent an email to Omegle in an attempt to solve this problem. Thank you for taking the time to read this, and I hope to hear back! I am receiving dozens of contact requests per day, from people who do not know what is going on. Sincerely, Mick
Hi, Mick, and welcome to the Community,
For any participants in the group chat who happen to have this troll on their contact lists, please advise them to Block the contact and check in the Report as Abuse/Spam box as described in this FAQ article:
https://support.skype.com/en/faq/FA34447/what-should-i-do-if-i-see-abusive-behavior-on-skype
Thank you for taking the time to post this incident, which I have flagged for review by those to whom I report.
Regards,
Elaine
Similar Messages
-
Malicious user (troll) is sending out my Skype nam...
Hello, people! I am loving Skype, but I have an issue.
Recently, a user with malicious intent entered one of the group conversations I'm in on Skype. This user then proceeded to copy all the usernames of this group's members.
This user has programmed a bot that sends out those Skype usernames on a site called "Omegle". This has resulted in loads of unwanted contact requests for all people involved, and it is rather frustrating.
I can provide the username of this user if required, but have decided against posting it in this thread because of privacy concerns.
I was wondering if any steps could be taken to eliminate this issue. Unfortunately, I am aware that this problem may be out of Skype's reach. I have also sent an email to Omegle in an attempt to solve this problem.
Thank you for taking the time to read this, and I hope to hear back! I am receiving dozens of contact requests per day, from people who do not know what is going on.
Sincerely,
MickHi, Mick, and welcome to the Community,
For any participants in the group chat who happen to have this troll on their contact lists, please advise them to Block the contact and check in the Report as Abuse/Spam box as described in this FAQ article:
https://support.skype.com/en/faq/FA34447/what-should-i-do-if-i-see-abusive-behavior-on-skype
Thank you for taking the time to post this incident, which I have flagged for review by those to whom I report.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
User Calendar Invites Send Out Multiple Times Months Apart
Question, we have a user who's calendar invites will be created and sent out, and then the same calendar invite will be sent out again a month later. Does anyone know how to fix this problem or what the solution is?
Hi,
In addition, I want to double confirm this invite send out again in his Send folder or the invitee receive this meeting request again.
Just only one user facing this question? Please double check the outlook rule and add-in.
Please run Message Tracking log to get details about this message, also message header:
Get-MessageTrackingLog –Server “mailbox server” –Sender
“[email protected]” –Recipient “[email protected]” –MessageSubject “Read: message subject” | Select Timestamp, ClientHostname,ServerHostname,Source,EventID,Recipients,RecipientStatus,Sender | ConvertTo-Html > “C:\Test\Test.xml”
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
I cannot access one of two users on my mac..i have tried using the shift key but no luck...the one user that I can access runs very slowly, I get a lot of beach balls from **** action...also the message "unapproved caller" keeps popping up...I ran disk check from good user and it shows OK...Disk usage shows ~267gb used out of 360gb disk
Spinning Beach Ball
Spinning Beach ball (2)
Spinning Beach ball (3)
Spinning Beach ball (4) -
I have a iPhone 4. I have 3 email accounts. When I send mail from my aol account it sends my full name and not the email address acount. How can I change so my name does not appear and my user name appears?
iPods, iPhones, and iPads aren't tied to one particular iTunes accout/Apple ID. So there are no special instructions to follow to allow you to sync it with your newer account. Simply sync it as you would your iPhone 4.
B-rock -
To get the the out put of the procedure..help needed
hi all,
i have a procedure :
CREATE OR REPLACE PROCEDURE EN_GetCategory
StaffID IN VARCHAR2 DEFAULT NULL,
ResultCategory OUT VARCHAR2
AS
v_exec_tx varchar2(2000);
Condition VARCHAR2(1000);
Category VARCHAR2(1);
SQL_ADV VARCHAR2(2000);
Cnt NUMBER(10);
Cnt1 NUMBER(10);
CURSOR curCategory IS
SELECT SMC.Category,SMC.Condition FROM ST_MS_Category SMC ORDER BY OrderRowNo;
BEGIN
EXECUTE IMMEDIATE 'TRUNCATE TABLE TMP';
OPEN curCategory;
FETCH curCategory INTO Category, Condition;
while curCategory%FOUND
LOOP
BEGIN
v_exec_tx:='SELECT COUNT(*) FROM ST_EMPLOYEE WHERE StaffID=''' || EN_GETCATEGORY.STAFFID ||''' AND ' || EN_GETCATEGORY.CONDITION;
EXECUTE IMMEDIATE v_exec_tx into Cnt;
IF Cnt > 0 THEN SELECT COUNT(*) INTO CNT1 FROM tmp ;
IF CNT1> 0 THEN
UPDATE tmp SET CAT = Category ;
ELSE
INSERT INTO tmp VALUES (Category );
END IF;
END IF;
FETCH curCategory INTO Category, Condition;
END;
END LOOP;
CLOSE curCategory;
BEGIN
FOR REC IN ( SELECT CAT FROM tmp
LOOP
EN_GetCategory.ResultCategory := REC.CAT;
END LOOP;
END;
END;
i need to execute this procedure..
i tried EXEC EN_GETCATEGORY('812005','');
but getting error invalid sql statemnt..
i think for this we have to write some more code can u please help to to find the output ofthis procedure..
Thanks In advanceHi,
i tried EXEC EN_GETCATEGORY('812005','');It's execute Procedure_name('Parameters');
Regds.What tosh! "exec" is perfectly ok to use to call a procedure.
The problem is with the OUT parameter. You need to declare a variable into which the OUT value can be put. -
How to find out a skype ID from a text?
Met someone today and gave them my number, but they are from another country so i guess they used skype to text me which i can't reply to because skype is retarded... anyways, is there any way to find out the skype name of the person who sent it? The text just came from a random 5 digit number. I also got a phone call that i missed just a minute before this from a stange number with way too many digits so i assume its from skype as well so i have a number from that too but i can't call it back.
Community_Team wrote:
Congratulations, monclm!
As the result of your contributions to the community, you have earned a new rank. Your new rank is Casual Tourist.
We appreciate your efforts and hope you will continue to be an active member of the community.
Thanks!
How sweet of you to welcome me.
However...I've been screaming at my computer for the last day because of one simple problem that it seems imposible to sort.
Do you know that your customer support is an endless labyrinth? Is it deliberate????
I don't have my Skype ID. I would like to find out my Skype ID. It would be useful to have it. I'm sure you understand.
So far I've reset my password wht seems like a million times which now means that I have to write down a random password which means that my account is now no longer secure. Also it was entierly unclear that resetting my Skype password would reset my Hotmail one too - Not helpful to say the least.
So I go through the rigmarole of contacting your customer 'services' and I have to reset my password - as I've said, this is unhelpful but I do it. Many times. And then.... I need my Skype ID to go any further. You can see the problem here. My issue is I don't have a Skype ID and I need to use my Skype ID to then get help finding out what my Skype ID is....
Please tell me what my Skype ID is. I have an interview for a job that I need to do over Skype - I've been out of work for the last 8 months and it would be really nice to get a job and for it I need my Skype ID.
Many thanks in advance for your help,
Monica -
User are getting kicked out of SNP planning book
Hello Experts
I hope you can help me out here!
From time to time we are experiencing strange issue for SNP user's .. User are getting kicked out from SNP planning book
Please help us.
Thanks
RameshHi Ramesh,
As far as I know, users should not get kicked out unless someone terminates their session.
Even if they lock some data and the same data is needed by some job, it's the job that would fail showing data lock. Similarly, if some other uses tries to access the locked data, the user who is accessing later would face the issue of not being able to go to edit mode.
It's possible to write programs that could specifically do this work of kicking out users before we run batch jobs, but let me assume that this is not the case with you.
One possibility is that there is issue in livecache and so users are not able to access livecache or get kicked out from their active session (e.g. your log area gets full, then users would soon get kicked out after seeing the system hanging initially). This you would need to check at the time when users face issue. This would also mean that other processes that need livecache should also fail e.g. GATP, or SNP planning or PPDS planning related jobs would fail at the same time.
If you could share exactly what error message the users are seeing, that could be helpful in resolving the issue.
Thanks - Pawan -
Trying to send out email to a list
When I try to send an email to a list -- which I many, many times -- I get message "login to server outgoing.yahoo.verizon.net failed" so I have not been able to send out my email to list. Help!
check SMTP server settings
Tools > Account Settings > Outgoing Server (SMTP)
* Outgoing SMTP server name: outgoing.yahoo.verizon.net
* Port: 465
* Connection Security: SSL/TLS
* Authentication method: Normal password
re: "login to server outgoing.yahoo.verizon.net failed"
Was that the full and total error message? Was there is a bit more info.
Can you send a single email on it's own? Is it only when you want to send a list?
Tell me about this 'list':
Have you created a 'Mailing List' as a sub list of an address book - are you using this 'list'?
or do you just add a load of email addresses into Bcc fields?
Is at least one of those in a TO filed? -
Help needed, Createing Dynamic User input
Hello,
I am attempting to create some dynamic user input by "predicting" what the user requires in a text box.
For example if the user enters "Smi" I have a select list pop up which gives the user all options that begin with "Smi".
I am able to achieve the popups but the interface is quite jerky and not terribly responsive I am trying to solve this by using a thread which starts and stops when new input is received but it is still not quite right.
The program uses a Sorted TreeSet to hold the data (I thought this would give me a quick search time) and a simple interface at this stage.
Any help would be fantastic
Thanks in advance :P
import java.io.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.event.*;
import java.text.*;
import java.util.*;
/** This program represents part of a larger user interface for allowing the
user to select data from a file or database.
<p>
When the program starts up, it will read in data from a given file, and hold
it in some type of container allowing rapid access.
<p>
The user may then type in the first few letters of the surname of a person,
and this program should immediately present in a popup dialog the names which
match. The user will be able to click on one of the names in the popup and
that will cause all data about that person to be displayed in the JTextArea
at the bottom of the window.
<p>
This program requires the FormLayout.class, FormLayout$Placement.class, and
FormLayout$Constraint.class files in the same directory
(folder) or in its classpath. These is provided separately.
class PartMatch extends JFrame implements Runnable
/** Close down the program. */
JButton quitbtn;
/** Field for the surname. */
JTextField namefld;
/** Full details of the person(s). */
JTextArea results;
/** Popup dialog to display the names and addresses which
match the leading characters given in namefld. */
Chooser matches;
/** Default background color for a window. */
final static Color defBackground = new Color(0xD0C0C0);
/** Default foreground color for a window. */
final static Color defForeground = new Color(0x000000);
/** Default background color for a field */
final static Color fldBackground = new Color(0xFFFFFF);
/** Default background color for a button */
final static Color btnBackground = new Color(0xF0E0E0);
final static Color dkBackground = new Color(0xB0A0A0);
/** Larger font */
final static Font bold = new Font("Helvetica", Font.BOLD, 30);
TreeSet members;
String input;
String[] found;
public static void main(String arg[])
UIManager.put("TextField.background",fldBackground);
UIManager.put("TextField.foreground",defForeground);
UIManager.put("TextField.selectionBackground",btnBackground);
UIManager.put("TextArea.background",fldBackground);
UIManager.put("TextArea.foreground",defForeground);
UIManager.put("TextArea.selectionBackground",btnBackground);
UIManager.put("Panel.background",defBackground);
UIManager.put("Label.background",defBackground);
UIManager.put("Label.foreground",defForeground);
UIManager.put("Button.background",btnBackground);
UIManager.put("Button.foreground",defForeground);
UIManager.put("CheckBox.background",defBackground);
UIManager.put("ScrollBar.background",defBackground);
UIManager.put("ScrollBar.thumb",btnBackground);
UIManager.put("ComboBox.background",btnBackground);
UIManager.put("ComboBox.selectionBackground",dkBackground);
PartMatch trial = new PartMatch(arg);
public PartMatch( String [] arg )
super("Part Match");
setDefaultCloseOperation(EXIT_ON_CLOSE);
Container cpane = getContentPane();
FormLayout form = new FormLayout(cpane);
JLabel lab1 = new JLabel("Fetch details") ;
lab1.setFont( bold );
form.setTopAnchor( lab1, 4 );
form.setLeftAnchor( lab1, 4 );
JLabel lab2 = new JLabel("Surname: ") ;
form.setTopRelative( lab2, lab1, 4 );
form.setLeftAlign( lab2, lab1 );
namefld = new JTextField( 30 );
form.setBottomAlign( namefld, lab2 );
form.setLeftRelative( namefld, lab2, 4 );
namefld.addCaretListener( new CaretListener()
public void caretUpdate(CaretEvent e)
showMatches();
quitbtn = new JButton( "Quit" );
quitbtn.addActionListener( new ActionListener()
public void actionPerformed(ActionEvent e)
quitProcessing();
form.setBottomAlign( quitbtn, namefld );
form.setLeftRelative( quitbtn, namefld, 15 );
results = new JTextArea( 10,50 );
results.setEditable(false);
JScrollPane jsp = new JScrollPane( results,
JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED );
form.setTopRelative( jsp, lab2, 6 );
form.setLeftAlign( jsp, lab2 );
form.setBottomAnchor( jsp, 5 );
form.setRightAnchor( jsp, 5 );
form.setRightAnchor( quitbtn, 5 );
matches = new Chooser( this );
//matches.setUndecorated(true);
pack();
setVisible(true);
namefld.requestFocus();
if (arg.length > 0) init(arg[0]);
else init("triathlon.txt"); //<<<<<<<<<<<<<<<< Place the default filename here
/** Called once only, at the end of the constructor, to read the data
* from the membership file.
public void init( String fname )
members = new TreeSet();
try {
FileReader fr = new FileReader(new File (fname));
Scanner scan = new Scanner(fr);
trimember cmem;
String cLine, eTag, memberNo, first, last, gender, yob, tel ,addr,
club;
while(scan.hasNextLine())
cLine = scan.nextLine();
Scanner scan2 = new Scanner(cLine);
scan2.useDelimiter(";");
eTag = scan2.next().trim();
memberNo = scan2.next().trim();
first = scan2.next().trim();
last = scan2.next().trim();
gender = scan2.next().trim();
yob = scan2.next().trim();
tel = scan2.next().trim();
addr = scan2.next().trim();
club = scan2.next().trim();
cmem = new trimember(eTag, memberNo, first, last, gender, yob,
tel, addr, club);
members.add(cmem);
catch (FileNotFoundException ex)
results.append("Sorry can't find the input file\n");
results.append("Please check file name and location and try again");
ex.printStackTrace();
/** Called every time there is a change in the contents of the text field
* namefld. It will first clear the text area. It then needs to search
* through the container of data to find all records where the surname
* starts with the characters that have been typed. The names and
* addresses need to be set up as strings and placed in
* an array of Strings. This can be placed in the "matches" window and
* displayed for the user, inviting one to be selected.
* <p>
* The performance of this is very important. If necessary, it may be
* necessary to run as a separate thread so that the user interface is
* not delayed. It is essential that the user be able to type letters at a
* reasonable speed and not have the keystroke processing held up by
* previous text.
public void showMatches( )
run();
// First clear the text area
//results.setText("");
// Determine the leading characters of the surname that is wanted
input = namefld.getText();
// Locate the data for this name, and display each matching item
// in the JTextArea ...
// Example of how to set the data in the popup dialog
matches.list.setListData(found);
matches.pack(); // resize the popup
// set the location of the popup if it is not currently visible
if ( ! matches.isVisible())
Dimension sz = matches.getSize();
Point mouse = getMousePosition();
Point framepos = getLocation();
int x=0, y=0;
if (mouse == null)
Point pt = results.getLocation();
x = pt.x + 20 + framepos.x;
y = pt.y + 20 + framepos.y;
else
x = mouse.x - 2 + framepos.x;
y = mouse.y - 2 + framepos.y;
matches.setLocation(x,y);
matches.setVisible(true);
namefld.requestFocus();
/** Perform any final processing before closing down.
public void quitProcessing( )
// Any closing work. Then
System.exit(0);
public void run()
ArrayList<String> foundit = new ArrayList<String>();
System.out.println(input);
if(input != null)
Iterator it = members.iterator();
while(it.hasNext())
trimember test = (trimember) it.next();
if (test.last.startsWith(input))
foundit.add(test.last +", "+ test.first);
found = new String[foundit.size()];
for(int i=0; i<foundit.size();i++)
found[i] = foundit.get(i);
/** A window for displaying names and addresses from the data set which
match the leading characters in namefld.
<p>
This will automatically pop down if the user moves the mouse out of the
window.
<p>
It needs code added to it to respond to the user clicking on an item in
the displayed list. */
class Chooser extends JWindow
/** To display a set of names and addresses that match the leading
characters of the namefld text field. */
public JList list = new JList();
Chooser( JFrame parent )
super( parent );
Container cpane = getContentPane();
cpane.addMouseListener( new MouseAdapter()
public void mouseExited(MouseEvent e)
Chooser.this.setVisible(false);
cpane.add("Center",list);
list.addListSelectionListener( new ListSelectionListener()
public void valueChanged(ListSelectionEvent e)
Chooser.this.setVisible(false);
System.out.println("ValueChanged");
// First clear the text area
results.setText("");
String in = (String) list.getSelectedValue();
System.out.println("Selected Value was : "+in);
String[] inlf = in.split(", ");
System.out.println("inlf[0]:"+inlf[0]+" inlf[1]:"+inlf[1]);
results.append("Surname \tFirst \teTag \tMemberNo \tSex \tYOB " +
"\tTel \tAddress \t\t\tClub\n");
Iterator it = members.iterator();
while(it.hasNext())
trimember test = (trimember) it.next();
if (test.last.equals(inlf[0])&&test.first.equals(inlf[1]))
results.append(test.toString()+"\n");
namefld.requestFocus();
public class trimember implements Comparable
String eTag;
public String memberNo;
public String first;
public String last;
String gender;
String yob;
String tel;
String addr;
String club;
public trimember(String eT, String me, String fi, String la,
String ge, String yo, String te, String ad, String cl)
eTag = eT;
memberNo = me;
first = fi;
last = la;
gender = ge;
yob = yo;
tel = te;
addr = ad;
club = cl;
//To String method to output string of details
public String toString()
return last + "\t" + first + "\t" + eTag + "\t" +
memberNo + "\t" + gender + "\t" + yob + "\t"+ tel + "\t" +
addr + "\t" + club;
//Compare and sort on Last name
public int compareTo(Object o)
trimember com = (trimember) o;
int lastCmp = last.compareTo(com.last);
int firstCmp = first.compareTo(com.first);
int memCmp = memberNo.compareTo(com.memberNo);
if (lastCmp == 0 && firstCmp !=0)return firstCmp;
else if (lastCmp==0&&firstCmp==0)return memCmp;
else return lastCmp;
}Please don't cross-post. It is considered very rude to do that here:
http://forum.java.sun.com/thread.jspa?messageID=9953193 -
Help needed, Providing Dynamic User input
Hello,
I am attempting to create some dynamic user input by "predicting" what the user requires in a text box.
For example if the user enters "Smi" I have a select list pop up which gives the user all options that begin with "Smi".
I am able to achieve the popups but the interface is quite jerky and not terribly responsive I am trying to solve this by using a thread which starts and stops when new input is received but it is still not quite right.
The program uses a Sorted TreeSet to hold the data (I thought this would give me a quick search time) and a simple interface at this stage.
Any help would be fantastic
Thanks in advance :P
import java.io.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.event.*;
import java.text.*;
import java.util.*;
/** This program represents part of a larger user interface for allowing the
user to select data from a file or database.
<p>
When the program starts up, it will read in data from a given file, and hold
it in some type of container allowing rapid access.
<p>
The user may then type in the first few letters of the surname of a person,
and this program should immediately present in a popup dialog the names which
match. The user will be able to click on one of the names in the popup and
that will cause all data about that person to be displayed in the JTextArea
at the bottom of the window.
<p>
This program requires the FormLayout.class, FormLayout$Placement.class, and
FormLayout$Constraint.class files in the same directory
(folder) or in its classpath. These is provided separately.
class PartMatch extends JFrame implements Runnable
/** Close down the program. */
JButton quitbtn;
/** Field for the surname. */
JTextField namefld;
/** Full details of the person(s). */
JTextArea results;
/** Popup dialog to display the names and addresses which
match the leading characters given in namefld. */
Chooser matches;
/** Default background color for a window. */
final static Color defBackground = new Color(0xD0C0C0);
/** Default foreground color for a window. */
final static Color defForeground = new Color(0x000000);
/** Default background color for a field */
final static Color fldBackground = new Color(0xFFFFFF);
/** Default background color for a button */
final static Color btnBackground = new Color(0xF0E0E0);
final static Color dkBackground = new Color(0xB0A0A0);
/** Larger font */
final static Font bold = new Font("Helvetica", Font.BOLD, 30);
TreeSet members;
String input;
String[] found;
public static void main(String arg[])
UIManager.put("TextField.background",fldBackground);
UIManager.put("TextField.foreground",defForeground);
UIManager.put("TextField.selectionBackground",btnBackground);
UIManager.put("TextArea.background",fldBackground);
UIManager.put("TextArea.foreground",defForeground);
UIManager.put("TextArea.selectionBackground",btnBackground);
UIManager.put("Panel.background",defBackground);
UIManager.put("Label.background",defBackground);
UIManager.put("Label.foreground",defForeground);
UIManager.put("Button.background",btnBackground);
UIManager.put("Button.foreground",defForeground);
UIManager.put("CheckBox.background",defBackground);
UIManager.put("ScrollBar.background",defBackground);
UIManager.put("ScrollBar.thumb",btnBackground);
UIManager.put("ComboBox.background",btnBackground);
UIManager.put("ComboBox.selectionBackground",dkBackground);
PartMatch trial = new PartMatch(arg);
public PartMatch( String [] arg )
super("Part Match");
setDefaultCloseOperation(EXIT_ON_CLOSE);
Container cpane = getContentPane();
FormLayout form = new FormLayout(cpane);
JLabel lab1 = new JLabel("Fetch details") ;
lab1.setFont( bold );
form.setTopAnchor( lab1, 4 );
form.setLeftAnchor( lab1, 4 );
JLabel lab2 = new JLabel("Surname: ") ;
form.setTopRelative( lab2, lab1, 4 );
form.setLeftAlign( lab2, lab1 );
namefld = new JTextField( 30 );
form.setBottomAlign( namefld, lab2 );
form.setLeftRelative( namefld, lab2, 4 );
namefld.addCaretListener( new CaretListener()
public void caretUpdate(CaretEvent e)
showMatches();
quitbtn = new JButton( "Quit" );
quitbtn.addActionListener( new ActionListener()
public void actionPerformed(ActionEvent e)
quitProcessing();
form.setBottomAlign( quitbtn, namefld );
form.setLeftRelative( quitbtn, namefld, 15 );
results = new JTextArea( 10,50 );
results.setEditable(false);
JScrollPane jsp = new JScrollPane( results,
JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED );
form.setTopRelative( jsp, lab2, 6 );
form.setLeftAlign( jsp, lab2 );
form.setBottomAnchor( jsp, 5 );
form.setRightAnchor( jsp, 5 );
form.setRightAnchor( quitbtn, 5 );
matches = new Chooser( this );
//matches.setUndecorated(true);
pack();
setVisible(true);
namefld.requestFocus();
if (arg.length > 0) init(arg[0]);
else init("triathlon.txt"); //<<<<<<<<<<<<<<<< Place the default filename here
/** Called once only, at the end of the constructor, to read the data
* from the membership file.
public void init( String fname )
members = new TreeSet();
try {
FileReader fr = new FileReader(new File (fname));
Scanner scan = new Scanner(fr);
trimember cmem;
String cLine, eTag, memberNo, first, last, gender, yob, tel ,addr,
club;
while(scan.hasNextLine())
cLine = scan.nextLine();
Scanner scan2 = new Scanner(cLine);
scan2.useDelimiter(";");
eTag = scan2.next().trim();
memberNo = scan2.next().trim();
first = scan2.next().trim();
last = scan2.next().trim();
gender = scan2.next().trim();
yob = scan2.next().trim();
tel = scan2.next().trim();
addr = scan2.next().trim();
club = scan2.next().trim();
cmem = new trimember(eTag, memberNo, first, last, gender, yob,
tel, addr, club);
members.add(cmem);
catch (FileNotFoundException ex)
results.append("Sorry can't find the input file\n");
results.append("Please check file name and location and try again");
ex.printStackTrace();
/** Called every time there is a change in the contents of the text field
* namefld. It will first clear the text area. It then needs to search
* through the container of data to find all records where the surname
* starts with the characters that have been typed. The names and
* addresses need to be set up as strings and placed in
* an array of Strings. This can be placed in the "matches" window and
* displayed for the user, inviting one to be selected.
* <p>
* The performance of this is very important. If necessary, it may be
* necessary to run as a separate thread so that the user interface is
* not delayed. It is essential that the user be able to type letters at a
* reasonable speed and not have the keystroke processing held up by
* previous text.
public void showMatches( )
run();
// First clear the text area
//results.setText("");
// Determine the leading characters of the surname that is wanted
input = namefld.getText();
// Locate the data for this name, and display each matching item
// in the JTextArea ...
// Example of how to set the data in the popup dialog
matches.list.setListData(found);
matches.pack(); // resize the popup
// set the location of the popup if it is not currently visible
if ( ! matches.isVisible())
Dimension sz = matches.getSize();
Point mouse = getMousePosition();
Point framepos = getLocation();
int x=0, y=0;
if (mouse == null)
Point pt = results.getLocation();
x = pt.x + 20 + framepos.x;
y = pt.y + 20 + framepos.y;
else
x = mouse.x - 2 + framepos.x;
y = mouse.y - 2 + framepos.y;
matches.setLocation(x,y);
matches.setVisible(true);
namefld.requestFocus();
/** Perform any final processing before closing down.
public void quitProcessing( )
// Any closing work. Then
System.exit(0);
public void run()
ArrayList<String> foundit = new ArrayList<String>();
System.out.println(input);
if(input != null)
Iterator it = members.iterator();
while(it.hasNext())
trimember test = (trimember) it.next();
if (test.last.startsWith(input))
foundit.add(test.last +", "+ test.first);
found = new String[foundit.size()];
for(int i=0; i<foundit.size();i++)
found[i] = foundit.get(i);
/** A window for displaying names and addresses from the data set which
match the leading characters in namefld.
<p>
This will automatically pop down if the user moves the mouse out of the
window.
<p>
It needs code added to it to respond to the user clicking on an item in
the displayed list. */
class Chooser extends JWindow
/** To display a set of names and addresses that match the leading
characters of the namefld text field. */
public JList list = new JList();
Chooser( JFrame parent )
super( parent );
Container cpane = getContentPane();
cpane.addMouseListener( new MouseAdapter()
public void mouseExited(MouseEvent e)
Chooser.this.setVisible(false);
cpane.add("Center",list);
list.addListSelectionListener( new ListSelectionListener()
public void valueChanged(ListSelectionEvent e)
Chooser.this.setVisible(false);
System.out.println("ValueChanged");
// First clear the text area
results.setText("");
String in = (String) list.getSelectedValue();
System.out.println("Selected Value was : "+in);
String[] inlf = in.split(", ");
System.out.println("inlf[0]:"+inlf[0]+" inlf[1]:"+inlf[1]);
results.append("Surname \tFirst \teTag \tMemberNo \tSex \tYOB " +
"\tTel \tAddress \t\t\tClub\n");
Iterator it = members.iterator();
while(it.hasNext())
trimember test = (trimember) it.next();
if (test.last.equals(inlf[0])&&test.first.equals(inlf[1]))
results.append(test.toString()+"\n");
namefld.requestFocus();
public class trimember implements Comparable
String eTag;
public String memberNo;
public String first;
public String last;
String gender;
String yob;
String tel;
String addr;
String club;
public trimember(String eT, String me, String fi, String la,
String ge, String yo, String te, String ad, String cl)
eTag = eT;
memberNo = me;
first = fi;
last = la;
gender = ge;
yob = yo;
tel = te;
addr = ad;
club = cl;
//To String method to output string of details
public String toString()
return last + "\t" + first + "\t" + eTag + "\t" +
memberNo + "\t" + gender + "\t" + yob + "\t"+ tel + "\t" +
addr + "\t" + club;
//Compare and sort on Last name
public int compareTo(Object o)
trimember com = (trimember) o;
int lastCmp = last.compareTo(com.last);
int firstCmp = first.compareTo(com.first);
int memCmp = memberNo.compareTo(com.memberNo);
if (lastCmp == 0 && firstCmp !=0)return firstCmp;
else if (lastCmp==0&&firstCmp==0)return memCmp;
else return lastCmp;
}Edited by: Roger on Nov 3, 2007 11:50 AMPlease don't cross-post. It is considered very rude to do that here:
http://forum.java.sun.com/thread.jspa?threadID=5233033&messageID=9953169#9953169 -
Hi everyone,
I have a problem with my skype name, because I created my account around 2005, I lost my password and I cannot restart it because Skype says:
It looks like the account associated with the Skype Name migcenel doesn’t have any billing details. Unfortunately, this means we are unable to verify your identity.
If you can access your email address don’t forget you can reset your password by clicking here or find out your Skype Name by going to this page and clicking "Forgotten your Skype Name".
The problem is that my email associated with that account is closed and I really need to get back my skype name because is my unique name in all my accounts.
Can you help me with this?Hi, migarcangel,
I just found your post in the Skype Manager message board today (6/11/2012).
Unfortunately, you may not be able to recover your account if you cannot prove the ownership of it to Skype Customer Service. While I appreciate the inconvenience, this is for our safety and security. Here is the link to an FAQ article with more information:
https://support.skype.com/en-us/faq/FA109/I-ve-forgotten-my-password
Best regards,
elainem77
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often! -
My computer has been infected by a Trojan Horse. It has taken over my Mac email account and began sending out malicious emails to everyone in my address book. I cleared out my MAC address book and began using my AOL email account. It took a few days and then my AOL email account was infected and has now been send out malicious email to all my contacts for over a month. It has also infected my iPhone--I am no longer able to send or receive emails on my iPhone. Also, once the Trojan Horse began using my AOL email it completely blocked me from using my MAC account by sending never ending popups asking for my email password to access my MAC email account, but it never accepts my pass word. The TH has also slowed down everything on my computer. It's like I am working on an old PC with dial up connection instead of the high speed digital connection that I have. The little color wheel spins constantly as I wait for sometimes over a minute for a page to pull up. If it pulls up at all. I have tried to use the 2 disks that came with my computer to completely remove everything on my computer and then reinstall all the programs, but I am not allowed to sweep my computer clean. I thought maybe my disks that came with my computer were defective so I called Apple and they sent me 2 new disks. I am not able able to clear my computer with the 2 new disks either. I have done this before successfully so it's not something new to me. I do remember when I believe my computer became infected: I had googled an unusual sewing term, and I was opening what appeared to be legitimate sites, when all of a sudden a pop up appeared that said that my computer had been infected. I immediately shut my computer off, but it was too late. I downloaded a virus program for Mac, and it has never found a virus or problem at all. I think it is part of this Trojan Horse, but I am unable to delete it from my computer. It refuses to uninstall. The Mac Trojan Horse is real and it is terrible. If anyone has any suggestions for me I would be very appreciative,
Beth
vuInstall ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
E-sourcing couldn't send out E-mail notification of new user.
Dear experts,
I got stuck on SMTP issue when configuring a E-sourcing sandbox, when I created some Buy-side users, the system was not able to send out the notifications but all stuck in "Queued Messages" .
I browsed in the system, the settings related with the SMTP function including below items:
1: "Source Email" in Company Properties, this email address is going to be indicated as the sender of a new user notification;
2: "Messaging" configuration in System Properties:
( messaging messaging.smtp.mailhost
messaging messaging.smtp.password
messaging messaging.smtp.username )
I have set up above fields as the same as a working E-sourcing application, but my sandbox still doesn't work for me, the new user created can't receive the notification to become a valid user of the system, so they will not be able to logon to the system without password information.
Would you please advice me what should I do, any of your response in highly appreciated!
Thanks and best regards!
edward.Edward,
Please verify a couple of things:
1. Is the functional e-sourcing box is running on the same version of Sandbox version (which you are configuring)
2. Verify that "New User" notification template is set to active in the email templates setting through setup
3. If no issues with 1 and 2 then would suggest to clear mail queue from backend and try generating a new email
Please let us know the out come.
Good Luck. -
Hi,
My Mac info:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Mail Version 2.1.3 (753.1)
My mail application can send out message but can't receive new e-mail now ? please see attached before my capture screen
and some software(adobe illustrator cs) and applications(terminal) can't run ? please see attached
but in another user account, terminal and illustrator can run.
Please kindly help to check with these problems. Thanks.Verify and Repair disk “Data”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
Repairing volume.
Rechecking volume.
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Data was repaired successfully.
Mounting Disk
1 HFS volume checked
Repair attempted on 1 volume
1 HFS volume repaired
Maybe you are looking for
-
Can I use SubPanels to display and run multiple executables from the same GUI?
I have two Labview executables that performs some A/D I/O, each using an independent USB-6008. I would like to run both of these executables from a single UI. Is this possible usin SubPanels? Or some other method? I found KB regarding exe's and VI
-
IE locks when printing to pdf from a web-based page or pdf
Acrobat 7 standard. IE 6 on XPPro64. It is a 64 bit machine and so printer drivers had to be obtained for 64 bit. When I try to print to "Adobe pdf", the current page out of a 200 page catalog being viewed online, IE locks up and the print job in the
-
What does the community recommend as an appropriate response in light of reports that "an estimated 600,000 or more Macs are currently compromised and part of a massive botnet thanks to the Flashback Trojan." Is Apple taking steps to mitigate the th
-
Hi, I have a Nokia 6310i. I have downloaded PC Suite 4.88 and tried to install it on a PC with Win XP SP2. I get an error message saying that the .exe file is corrupted. I have since been informed that PC Suite 4.88 will not function with Win XP with
-
"Tiles cannot be displayed" error in Fraud Management web ui
Hi, I'm trying to setup Fraud Management SP1 on NetWeaver. We done all steps from Fraud Management 1.1 SP01 (on SAP HANA) installation guide, but still have a small problem. When I logged to the application through Web UI client and opened one of ava