MAM Sync shows the Status O-Waiting

Hello all,
I'm trying to do the sync steps in my MI Client (using MAM), but when i try to do this, the SyncBOs in MEREP_MON are always showing the Status O-Waiting, and the data is not arriving to Client. I don't receive any error message in client.
I've tried to run MEREP_RDB_T01_RESET in SE37 and replicate the SyncBOs in MEREP_PD and MEREP_EX_REPLIC. I've tried to reinstall MI Client and generate a new device ID. Nothing is happen.
By the way, I've tried schedule of MI Jobs again and generate the roles for MI In PFCG. Nothing.
I getting this problem after a System restart on the middleware. Before this, the system was working good.
The system is: SAP Netweaver 2004s (WebAS 7.0) with Mobile Infrasctruture. MAM 2.5. NW2004s is running in with Support Package 10 for Abap and Java stacks.
Anybody have an Idea?
Thanks a lot.
Carlos

Hi Carlos,
First, check the whether you have enabled all the syncBOs in merep_pd. That is the culprit most number of times.
Check if the data has come to the MEREP_207 table, which the RDB for the T01 syncBOs. If you have data in the table, then your replication is working fine.
Kindly do the above two steps, and let me know abt their results. Also, tell me what is your MI client SP level.
Regards,
Rahul

Similar Messages

Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

Workflow attached to content type shows the status as 'Starting'

Hi,
I have developed a workflow to distribute documents from Drop Off library to different SharePoint libraries based on the content type that the document uploaded to.
The drop off library has been configured incoming mail settings hence the documents would be on boarded to drop off library through e-mails. In this scenario, my workflow should be triggered when the document is on boarded through email.
Another scenario, the user can upload the document to different content type manually and updates the respective meta data values. This scenario, my workflow should be triggered when the item updated.
So, I have configured my workflow should run on the content types and trigger when item is created through e-mail and item is updated by manual.
The document on boarded through e-mails are working fine as soon as the item is created.
Issue:
The workflow associated on a content type which needs to be triggered on item created is triggering as soon as the user uploads a document manually and shows the status as 'Starting'.
The workflow associated on a content type which needs to be triggered on item modified is triggering as soon as the user updating meta data values after document is uploaded. Hence, throwing an error
'cannot open a file from drop off' library exception when I try to read file using C# code as file stream bytes.
Configuration:
1. The content types are having mandatory fields which has a default values set.
2. The document version settings are set as check out the document when editing the properties.
Please help me to resolve this bug and let me know if you need more details.
Also, let me know how can we cancel the workflow if it is in 'starting' mode.
The workflow should run the document is onboardedwhen an item is created and

Hi,
According to your description, my understanding is that you want to get data from content type in JSlink.
I suggest you can get the content type data in JSLink using JavaScript Client Object Model.
Here are some derailed code demos for your reference:
http://sharepoint.aspcode.net/view/635399286724222582163436/sharepoint-how-to-get-field-value-using-jsom-jslink-without-async-call
http://sharepoint.stackexchange.com/questions/93777/how-to-get-contenttype-name-in-clientsidejavascript-jquery-csom-etc-in-editf
Best Regards
Zhengyu Guo
TechNet Community Support

SCCM 2012 Client was removed but SCCM console still showing the status as "Yes"

Hi,
In a VM, SCCM 2012 client agent was removed and the VM was reverted back to a clean machine. SCCM console still shows the status as "Yes" even after the client agent was removed. Heartbeat Discovery is set to run every 1 hour.
Please guide on this.
Regards, Lorin Davis

It's kind like a person dying (sorry to be a bit morbid) -- how does the phone company know the person died? The dead person certainly can't tell them and the phone company doesn't query every person it services and ask them "are you alive?"
Thus, someone else must notify them of the person's passing. This is no different than a client agent "dying" in ConfigMgr. A ConfigMgr site never initiates communication with clients and thus something else needs to tell the site that the client
agent is dead. You! Or, an automated process (as Torsten mentioned) that goes through automatically marks a client as "dead" that hasn't been heard from in x number of days.
Jason | http://blog.configmgrftw.com | @jasonsandys

IDoc Error IDocs showing the status 53 "Application Document Posted".

Hi All
IDocs showing the status 53 "Application Document Posted". But values are not updated in SAP.
Plaese sugggest on this,
Thanks
Ajit K Barik

Ajit, there might have been a dump--check in ST22 or a update termination error, check in SM13.
Either of these you'll have to take help of your ABAP consultant to analyse.
Regards,
Raghu.

Runtime audit browser shows the status busy for the cancelled OWB jobs

Hi ,
I canceled long running OWB job.But the runtime audit browser was showing the status as BUSY.
I observed the the oracle session (SID:48) was running and killed the session.
After killing the session,the status in runtime audit browser changed to COMPLETED.
Till that time i was with an impression that "if we cancel a OWB job then it will kill all the sessions/process that initiated".
Could please tell me why this is happening?
Anything wrong with my configuration?
Appreciate early response.
Thanks,
Naidu

Hi Naidu
Yes you are absolutely right. When you press the cancel button in the GUI, the runtime repository does not get the signal that he is been asked to stop and abort. The GUI cancels himself but the background oracle process is still on !!!. The only way to do is to kill the oracle session. Another way I tried to tackle is
go to the directiry OWB/10.1/owb/rtp/sql and run the file @list_request.sql in sqlplus. Note that you have to login as runtime repositiry owner. After you get the audit id, run the file abort_exec_request.sql and supply the audit id that you obtained by running list_requests.sql. Sometimes it does not work also . Hence the best method is to kill the process

I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

something other is dowloading somewhere on ipad

I purchased iPhoto after installing Yosemite, but App store shows the download is "waiting"

I purchased iPhoto after installing Yosemite, but App store shows the download is "waiting", with a greyed out box that says pause.

Hi exyankee,
Thanks for the question. If I understand correctly, an app is stuck on waiting. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes: How to resume interrupted iTunes Store downloads - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Get-CacheHost is showing the status of nodes as UNKNOWN and caching service getting crashed - eventlog shows TimeoutException connecting to cache nodes.

After installing and configuring App fabric 1.1 and ran Get-CacheHost command to check the status of the nodes. Its showing the Status of the nodes as UNKNOWN. Some time caching service is crashing with Timeout exception and socketException connecting
to cache nodes. Below is the exception from the even log. When I see the debug log I could see timeout exceptions connecting to cache nodes. Here is the error in debug log. I appreciate your help on this. Thanks.
Error in Debug log in event viewer
Microsoft.Fabric.Common.OperationCompletedException: Operation completed with an exception ---> Microsoft.Fabric.Common.RemoteDownException: Connection rejected by the remote side ---> System.ServiceModel.EndpointNotFoundException: Could not connect
to net.tcp://xxxxx. yyyyyy:22234/77b087cc000000000000000000000000-31faf87a000000000000000000000000. The connection attempt lasted for a time span of 00:00:00. TCP error code 10061: No connection could be made because the target machine actively refused it
25.0.198.32:22234. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 25.0.198.32:22234
Error in Event viewer
AppFabric Caching service crashed with exception {Microsoft.ApplicationServer.Caching.DataCacheException: ErrorCode<ERRService0001>:SubStatus<ES0001>:Service initialization failed. No user action required. ---> Microsoft.Fabric.Common.OperationCompletedException:
Operation completed with an exception ---> System.TimeoutException: The operation has timed out.
   --- End of inner exception stack trace ---
   at Microsoft.Fabric.Common.OperationContext.End()
   at Microsoft.Fabric.Common.SharedCommunicationObject.EndOpen(IAsyncResult result)
   at Microsoft.Fabric.Federation.FederationSite.EndOpen(IAsyncResult result)
   at Microsoft.Fabric.Data.ReliableServiceManager.EndOpen(IAsyncResult ar)
   at Microsoft.ApplicationServer.Caching.DOMNode..ctor(Int32 id, String displayFriendlyNodeId, Int32 port, EndpointID[] urisDOM, ServiceConfigurationManager configurationManager, ReliableServiceProvider dataStore, ServiceResolverBase& client)
   --- End of inner exception stack trace ---
   at Microsoft.ApplicationServer.Caching.DOMNode..ctor(Int32 id, String displayFriendlyNodeId, Int32 port, EndpointID[] urisDOM, ServiceConfigurationManager configurationManager, ReliableServiceProvider dataStore, ServiceResolverBase& client)

Seems like a firewall issue, have you set the firewall rule to ALLOW inbound traffic to AppFabric?

My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

iCloud will not sycn a calendar from an external source. In order to use iCloud to sync it, you would have to move it to iCloud and stop using Google. I know how to do that on a Mac, but I'm not sure how to do it on a PC. If you're using Outlook, I suspect you export it as an .ics file to your desktop, then import it to the iCloud account in Outlook. I'm sure you could use Google to find the specific steps.
However, there's really no reason not to just use Google to sync your calendar across your devices. Instead, just continue to use Goole calendar on all your devices and they should stay in sync. Take a look at this video: http://www.youtube.com/watch?v=C0Jj0KFgbYI.

I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.

try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died

How can I get a start-time modified song to play with the modification on my ipad2? The sync shows the modification.

I shortened a song in my PC iTunes music library by using "get info" options and start time. The change shows up in my PC iTunes library for the song and after syncing, in my ipad2 music library when hooked up via USB. The song plays at original length on my ipad2. Weirdly enough, after syncing with my iPod, the song plays at the shortened length on the iPod. A previous sync with the ipad2 sent the shortened version to the iPad with no problems. The next time I synced, and 50 times later, all I got was the long version. It's a trivial matter but I need the song for a slide show presentation at a high school and the first few seconds of the song feature an expletive that I obviously can't use. Help! This is maddening.

We are Apple users here, and we answer technical questions.
Sorry, we cannot help you.

How do I show the Status file property of a Word document in the SharePoint library?

When I created some Word documents (using Word 2010) I filled in the Status property before saving them on my PC's local hard drive. Not having tried that before, I verified I'd done it by selecting the file in Windows 7 File Explorer and looking at
the file properties pane along the bottom of window. Lo and behold, there's a line in there called Content Status with a value identical to what I typed in within Word.
So far so good. But how do I get the SharePoint library to show the value of that field for each document? I tried Modify This View (go to the library, click ... , Click Modify This View) then looking at the list of columns I can enable / disable using the
Display tick boxes. But neither Status or Content Status are listed among the 21 Column Names and there doesn't seem to be a control to add custom ones.
Have I missed out some stage? What am I doing wrong?
Please keep in mind that I'm a SharePoint novice.
Regards,
Bruce Officer

Hi ,
Do you want to change the default paper size in Word 2010? If so, this is how I do it.
1. In Word 2010, go to Page layout tab.
2. Click Size in the Page Setup group then click More Paper Sizes.
3. In the Paper tab, input the paper size that you want, then click Set as default.
If there is anything that I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to show the status in colours on web dynpro.

Hi frnds,
              It is possible to display the status using like a signal lights.
                Ex: process in green , completed in yellow ,pending in red ..
                based on the status(process,completed,pending) i want to display the color in the browser.
                                                           or
            Display wards in color based on condition..
Edited by: Rakhi@abap on May 15, 2010 5:47 PM

Hi Rahki,
The status of what?
There are traffic light icons that you can use, or you can set the cell design (which changes the background colour of a cell (if you are in a table).
I often use this to indicate on a review step whether a cell/row has been inserted, modified or deleted from a table.
Chris

REPORT GETS HUNG WITH THE REPORT QUEUE SHOWING THE STATUS OF OPENING

I have installed Oracle 9ids on windows 2000 platform. This installation is part of the oracle clinical installation process.
The installation went on fine except few problems during generating reports. I am able to generate report but as soon as any one of the report fails it stops all the subsequent reports . The failing report has the status of "Opening" in the report queue manager whereas all the subsequent reports get stuck with the status of "Firing before trigger" status in the report queue manager.
Has anybody encountered the same problem or anything similar... if so, pls hlp...
Regards,
Venus

I tried this Gill, but result is bit different :-
Seems some little modifications are needed. Report should be displayed like the below one where it says how many times the same Task is associated with the same incident. Eg. Task 'TASK_CIRCUIT_RESOLVER' is associated with the incident 'INC000000001434' 4 times. 'IPCG Diagnostic Template' is associated with 'INC000000000943' 2 times. Similarly for other records.
But I really thankful to you for giving me the logic proceed further. I tried '=RunningCount([Task Name]; Row; ([Task Name]; [Incident ID]))'. It gave me desired results. :-
But the only thing that needs to be done is to bring the single Task associated with the Incident..
Thanks,
Neha Pateria

MAM Sync shows the Status O-Waiting

Similar Messages

Maybe you are looking for