MAMP and the scary config files

Hello,
I downloaded amd installed MAMP, and it works great. I have a few questions, though.
1) What should I type in the address bar of the browser of a different computer of a network? Obviously, if I'm on the the server directly, I type in http://localhost/. But if I'm on a different computer of the same network, what do I type in?
2) In Apache, typing this:
<VirtualHost *>
ServerAlias http://localhost/ addressname.somedomain
</VirtualHost>
in the (don't know which) config file, will that change typing in a IP address to get my webpage, into a full-address with a domain to get my webpage? this is on a closed network (intranet), so shouldn't I be able to do that?
3) What is a DNS server? Can't I make my own in our own closed-network?
I know these are a lot of questions, so thank you if you answer one of them!
- Craig

What should I type in the address bar of the browser of a different computer of a network?
The IP address (or hostname) for your computer.
For example, if your machine's IP address is 192.168.1.2 then other users on the network would enter:
http://192.168.1.2/
If you have DNS working on your network you can substitute the local DNS name for your machine, but it doesn't sound like that's the case since you ask:
What is a DNS server?
A DNS server is a server that maps hostnames to IP addresses so that us poor humans (who remember names better than numbers) can remember things like 'www.apple.com' rather than '17.254.0.91'.
When you enter a hostname in any app (such as your web browser), the browser queries your DNS server to perform a name lookup to find the IP address associated with that name.
2) In Apache, typing this:
<VirtualHost *>
ServerAlias http://localhost/ addressname.somedomain
</VirtualHost>
Is not valid. The ServerAlias tells Apache what hostnames it should look for in a http request in order to serve this site. 'http:/localhost/ addressname.somedomain/' is not valid here.
Additionally, if you're only serving one site, this is not needed at all. It is only needed when you run multiple different sites on one machine and Apache needs to know which site matches which virtual host.
Additionally, this won't make one iota of difference to users on the network. This is only telling apache how to respond to the requests. It won't make any difference to whether or not remote users can find your machine in the first place.
Can't I make my own in our own closed-network?
Sure. If no one else is going to use it, you can create a DNS server for any domain you like.

Similar Messages

Please ensure that the applicationhost.config file is correct and recommit the last configuration changes made

I am receiving event ID 5189 on Server 2008 R2, IIS 7.5. I experience this error across a number of servers, each of which is running only the default web site, but have 600+ applications running on the default web site. Each application
has its own application pool. My point is, the applicationhost.config is rather large.
I have seen a number of posts on this error message, but my issue itself seems to differ somewhat. I am aware of a similar post: http://social.technet.microsoft.com/Forums/en-US/3128ee93-1319-4cc2-9257-003512caf476/event-id-5189-microsoftwindowswas?forum=exchangesvrgeneral
which points to KB http://technet.microsoft.com/en-us/library/cc734988%28v=ws.10%29.aspx
However, in my case, it doesn't seem that the extreme measures for this resolution are required. The error usually indicates a corrupted applicationhost.config that must be manually fixed, or otherwise the WAS service needs to be restarted, or the
server itself, etc.
In my case, the issue can usually be fixed by an application pool recycle, or at worst a stop/start. I have an application which is sensitive to recycles, and so we do not have periodic recycle events configured for this application, which is the bulk
of the applications on the servers. It seems to me that this issue is usually caused by the application being in use when there is an applicationhost.config change.
For instance, we have one application that we deploy using msdeploy. We found that when we ran an installation for this application via msdeploy, we were receiving this event, and we would subsequently get 500 errors in the application (sometimes the
application pool corresponds to that which is identified in the event log, sometimes it doesn't).    It seems like applications that were being hit at the time the applicationhost.config was modified by msdeploy were affected. In an attempt
to correct this, we moved from msdeploy to a batch file containing appcmd commands. This also did not resolve the issue.
I have another application which is installed using PowerShell commandlets. We started to notice that this script also caused the issue to occur on occasion. As I continued to identify different processes that resulted in the same issue, I came
to the conclusion that this is likely due to any change in the applicationhost.config. I assume the issue is that the applicationhost.config is modified during a read operation to the file by the application pool, or WAS service, and that the recycle
event, which corrects the issue, forces a re-read of the applicationhost.config, resolving the bad-read issue.
Has anyone else experienced this, or do you have any recommendations? My current work-around is to not install any applications during peak hours, and performing an IISRESET after installs are completed, to ensure application stability.
Message              : The Windows Process Activation Service failed to generate an application pool config file for application pool 'myAppPool'. The error type is '7'. To resolve this issue,
please ensure that the applicationhost.config file is correct and recommit the last configuration changes made. The data field contains the error number.
Id                   : 5189
Version              : 0
Qualifiers           : 49152
Level                : 2
Task                 : 0
Opcode               : 0
Keywords             : 36028797018963968
RecordId             : 324108
ProviderName         : Microsoft-Windows-WAS
ProviderId           : 524b5d04-133c-4a62-8362-64e8edb9ce40
LogName              : System
ProcessId            : 0
ThreadId             : 0
MachineName          : MyComputer
TimeCreated          : 3/3/2014 9:03:24 PM
ContainerLog         : system
MatchedQueryIds      : {}
Bookmark             : System.Diagnostics.Eventing.Reader.EventBookmark
LevelDisplayName     : Error
KeywordsDisplayNames : {Classic}
Properties           : {System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty, System.Diagnostics.Eventing.Reader.EventProperty}

As an update to this issue, after doing some research, it appears the behavior is related to a new feature in IIS7 called Application Pool Isolation (http://technet.microsoft.com/en-us/library/dd163536.aspx).
This new feature prevents cross-application spillage by isolating the configuration for each application pool in IIS. So in reality, an application pool never actually reads the applicationhost.config - that is just a master file, and each time it
is update, it triggers a change to the individual application pool configuration files, located in C:\inetpub\temp\apppools.
We did try setting Advanced Settings > Disable Recycling for Configuration Change to true, but after an IIS reset we were still able to reproduce the issue - worse actually, because in our test program, which continually hits the web
service, and also continually makes apphost.config changes, when the two events collide, the 500.19 issue precipitates; but after an additional change to the apphost.config, it seems that the additional changes will actually correct the issue (seemingly forcing
another recycle, which is also how we resolve the issue manually); after making this setting adjustment, once the 500.19 issue precipitates, additional changes to the apphost.config does not correct the problem, only a manual recycle corrects it. This
is the recycling.disallowRotationOnConfigChange property of the app pool. We also set the setting for recycling.disallowOverlappingRotation to True as well, with the same result.
We ARE able to prevent this issue by setting the C:\inetpub\temp\apppools\myapppool\myapppool.config to read-only, but for obvious reasons, this is not a desired work-around.
It seems like what is happening is that any change to the ApplicationHost.config is resulting in each of the C:\inetpub\temp\apppools temp application pool config files being updated as well, in addition to triggering an application pool recycle. It
seems to me the desired behavior would be that these files are only updated if the applicationhost.config changes are specific to that application pool - but that doesn't seem to be the behavior.
After turning on failed request tracing, I was able to narrow the error down more:
ModuleName
AnonymousAuthenticationModule
Notification
2
HttpStatus
500
HttpReason
Internal Server Error
HttpSubStatus
19
ErrorCode
2147942413
ConfigExceptionInfo
\\?\C:\inetpub\application\application\web.config ( 9) :Failed to decrypt attribute 'password'
Notification
AUTHENTICATE_REQUEST
ErrorCode
The data is invalid. (0x8007000d)
This seems to be pretty static. Trying to look into possible causes of this issue.

Error in the input config file

Continue message previous.
I need deploy my application "notitia". Return message:
Failed to deploy web application "notitiancm". Error in the input config file. Attribute Options is a single value attribute.

Don't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken

Getting a "An error occurred while saving values to the app.config file." message

The content of the title is just part of the message I get. The second line of the message is: "The file might be corrupted or contain invalid XML."
I work with a lot of usercontrol libraries, and each one has 1 or 2 connection strings setup, and nothing else. I have no trouble in the code itself using the settings. Nor do I have trouble during runtime with them. But I do have the problem with every single library I work on.
The problem occurs when I make a change to the settings in the VS IDE (2005), which I do whenever I need to the connection string to point to my test SQL server, or need to set it back to the production SQL server. The connection strings were setup in the Settings tab of the Property page for the application.
I get the error message whenever I select the settings tab and again when I go to save it. I once tried deleting the app.config file, and recreating the settings, and the message went away until I checked it in. No one else has the problem when they get the files, but when I get then, I get the error message.
Any ideas what may be causing this. My boss thouight it might be an addon from CodeSMART, but I uninstalled it to see if the errors would go away and it didn't.
Thanks.
MarshallMarshall Youngblood

Marshall,
I am not sure if it helps in your case, but I have the similar problem. Add foloowing lines in your app.config file in configSections tag.
<
configSections>
<
sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<
section name="ApLibrary.My.MySettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</
sectionGroup>
</
configSections>
let me know if that helps.
Purvi Patel

Not able to Start Hyper-V(2012 R2) VM when placing the VM config file on Samba Share,Its giving error:Unable to initialize the saveset

---We are trying to setup Hyper-V on Samba shares samba version 3.6 exported from Ubuntu M/c. Basically runnig the Public(share) from the Ubuntu and able to access it from Windows 2012 (create/modify everything). I used Hyper-V and placed the disks
".vhd" on this , VM succesfull created and started. However when I placed the VM config files on this (samba) shares VM created successfully but its not starting, Its giving error like Unable to initialize the saveset -- Any idea how to place the
Hyper-V VM config files samba share?

Hi Rakesh KK,
Please confirm your share meet the Serve 2012r2 Hyper-V requirement, you can refer the following KB to get more detail require conditions.
Deploy Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SWFVISU task not appearing in any of the UWL Config files

Hello Workflow/Portal gurus, gotta question...
Scenario: I want custom workflow single-step tasks used in perf. mgmt. workflows to launch BSP application.
My understanding is that when you maintain link between workflow task and BSP application in SWFVISU followed by 'Register item types for all systems' in UWL and clearing Cache, UWL config file should be updated to include the task maintained in SWFVISU with appropriate launching parameters. I have used this successfully in the past with Wedbdynpro applications.
In my portal system, a new custom task that I maintain in SWFVISU is not even appearing in any of the UWL config file. when we use 'Register item types for all systems' option in UWL followed by clearing Cache,one of the config file does successfully get updated (we see success message and update date and time) but custom task is missing from the config.
Also, when I manually try to configure custom task and launching applications using one of the UWL wizard it gives error symbol with no messages. UWL behaves strange (Auth is not an issue) and couple of things we checked per UWL/Portal config docs seems to be in order.
Any pointers what we could be missing? Is there anything else other than adding task in SWFVISU followed by 'Register item types for all systems' in UWL and clearing Cache that needs to be done?
Appreciate your help,
Saurabh

Hi,
i had the same problem that all entries form SWFVISU could not be displayed in the XML config file.
The solution is very simple since SP 18 of NW portal: you need to configure a RFC destination in the Visual Admin (see Note 1133821).
Though if you are not using Delta Pull you have to create this destination to register the UWL.
I hope this helps.
Regards,
Marc

The setting ExternalProxy in the Web.Config file was not valid.

Since installing Exchange 2010 SP1 (Upgrade from RTM) I get this in the event viewer.
The setting ExternalProxy in the Web.Config file was not valid. The previous value was null and has been changed to .
Any ideas what to check?

I'm also getting a number of these errors on Exchange 2010 SP1 RU1, the settings that I get notified include (the values have been changed to a number of diferent values):
ExternalProxy
BootstrapMailDeliveryDelay
MobileUpdateInformationURL
BootstrapCABForWM61HostingURL
FullServerVersion
ADCacheMaxOrgCount
ADCacheExpirationTimeout
MaxDocumentDataSize
MaxDocumentLibrarySearchResults
MaxGALSearchResults
BadItemEmailToText
BadItemIncludeEmailToText
BadItemIncludeStackTrace
MaxClientSentBadItems
MailboxSearchTimeoutNoContentIndexing
MailboxSearchTimeout
MaxMailboxSearchResults
MaxRequestsQueued
MaxWorkerThreadsPerProc
MaxCollectionsToLog
ProxyConnectionPoolConnectionLimit
ProxyHandlerShortTimeout
ProxyHandlerLongTimeout
BackOffErrorWindow
BackOffTimeOut
BackOffThreshold
ProxyVirtualDirectory
BlockLegacyMailboxes
BlockNewMailboxes
SchemaValidate
SchemaDirectory
SyncLogDirectory
SyncLogEnabled
DisableCaching
DeviceClassCacheADCleanupInterval
DeviceClassPerOrgMaxADCount
DeviceClassCachePerOrgRefreshInterval
DeviceClassCacheMaxADUploadCount
DeviceClassCacheMaxStartDelay
MaxWindowSize
MaxRetrievedItems
EventQueuePollingInterval
ADCacheRefreshInterval
MaxSizeOfMailboxLog
NumOfQueuedMailboxLogEntries
MaxNumOfFolders
Can these be resolved in a similar manner. Some additional information would be great (as sjoegarrett I can also ignore them, but would prefer if these could be eliminated).

Error in the input config file.....delploying an app on oc4j

Hi,
When I try to deploy an application on an oc4j instance of Oracle 9ias it gives me the following error.
"An error occured while undeploying the application. Error in the input config file. Attribute Group is a single value attribute."
I am deploying the application through the EM website.
Any pointers to the solution?
Thanks in advance
Kapil

Don't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken

AzureDiagnostics fails after role udpate with no changes to configuration, error "Failed to parse the WAD config file"

Windows event log shows AzureDiagnostics errors "Failed to parse the WAD config file" and warning "
No certficate with given thumbprint found in the certificate store. Thumbprint:" and
System.ArgumentNullException: Value cannot be null.
Parameter name: s
   at System.IO.StringReader..ctor(String s)
   at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
   at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
   at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
Also tried a different deployment on a different subscription, same issue, and this one gets stuck in 'create' state with no roles showing up in 'instances' section for quite some time. Are Cloud Services even maintained by Microsoft
anymore? Seems that they are second class citizens to VMs, no updates, no new portal, no new features, often can't update single role without updating all roles, etc.

i am facing same error : here is the log:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticPlugin.exe DiagnosticPlugin-ShutdownEvent DiagnosticPlugin-TotalShutdownEvent -wadVer1v3
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Starting DiagnosticsPlugin
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RcfFileName: C:\Config\881bb2e524c04870b4e993fd8fefb7d8.881bb2e524c04870b4e993fd8fefb7d8.WorkerRole1_IN_0.13.xml
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] RoleInstanceId: WorkerRole1_IN_0; DeploymentId: 881bb2e524c04870b4e993fd8fefb7d8; RoleName: WorkerRole1
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Checking VM Type
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] File HandlerEnvironment.json not found. Extension set to PAAS
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Store Size: 4096
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Reading XML configuration file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Will use thumbprint
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Decrypting private configuration
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:00:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:00:39 PM] Retrying after 30 seconds. Retry attempt 1
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:09 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:09 PM] Retrying after 30 seconds. Retry attempt 2
DiagnosticsPlugin.exe Warning: 0 : [3/19/2015 6:01:39 PM] No certficate with given thumbprint found in the certificate store. Thumbprint:
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:01:39 PM] Retrying after 30 seconds. Retry attempt 3
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.Security.Cryptography.CryptographicException: The enveloped-data message does not contain the specified recipient.
at System.Security.Cryptography.Pkcs.EnvelopedCms.DecryptContent(RecipientInfoCollection recipientInfos, X509Certificate2Collection extraStore)
at Microsoft.Azure.Plugins.Diagnostics.dll.PluginConfigurationSettingsProvider.DecryptPrivateConfig(String encryptedConfig)
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] WadCfg is provided in initial configuration. Using that to initialize Diagnostics.
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] <PublicConfig xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration">
<WadCfg>
<DiagnosticMonitorConfiguration overallQuotaInMB="4096">
<DiagnosticInfrastructureLogs />
<Directories scheduledTransferPeriod="PT1M">
<IISLogs containerName="wad-iis-logfiles" />
<FailedRequestLogs containerName="wad-failedrequestlogs" />
</Directories>
<PerformanceCounters scheduledTransferPeriod="PT1M">
<PerformanceCounterConfiguration counterSpecifier="\Memory\Available MBytes" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\ISAPI Extension Requests/sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Web Service(_Total)\Bytes Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Requests/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET Applications(__Total__)\Errors Total/Sec" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Queued" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\ASP.NET\Requests Rejected" sampleRate="PT3M" />
<PerformanceCounterConfiguration counterSpecifier="\Processor(_Total)\% Processor Time" sampleRate="PT3M" />
</PerformanceCounters>
<WindowsEventLog scheduledTransferPeriod="PT1M">
<DataSource name="Application!*" />
<DataSource name="System!*" />
</WindowsEventLog>
<CrashDumps dumpType="Full">
<CrashDumpConfiguration processName="WaAppAgent.exe" />
<CrashDumpConfiguration processName="WaIISHost.exe" />
<CrashDumpConfiguration processName="WindowsAzureGuestAgent.exe" />
<CrashDumpConfiguration processName="WaWorkerHost.exe" />
<CrashDumpConfiguration processName="DiagnosticsAgent.exe" />
<CrashDumpConfiguration processName="w3wp.exe" />
</CrashDumps>
<Logs scheduledTransferPeriod="PT1M" scheduledTransferLogLevelFilter="Verbose" />
</DiagnosticMonitorConfiguration>
</WadCfg>
<StorageAccount>vinaystorageaccounttest</StorageAccount>
</PublicConfig>
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] Private setting is loaded
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] System.ArgumentNullException: Value cannot be null.
Parameter name: s
at System.IO.StringReader..ctor(String s)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Validate(String configString, String schemaPath, StringBuilder builder)
at Microsoft.Azure.Plugins.Plugin.WadConfigValidator`1.Initialize(String configString, String schemaPath)
at Microsoft.Azure.Plugins.Plugin.WadParser.Parse()
DiagnosticsPlugin.exe Error: 0 : [3/19/2015 6:02:09 PM] Failed to parse the WAD config file
DiagnosticsPlugin.exe Information: 0 : [3/19/2015 6:02:09 PM] DiagnosticPlugin.exe exit with code -106

Re: removing babylon from the about:config file

I did have the problem of, when I clicked on the plus sign to open a new tab in Firefox I would get the "babylon search engine". I got ride of part of the problem by cleaning up the about:config file. But there is about 5 lines connected to the "bablon search engine" still in the about:config file that I can't del. I have tryed everything I know of to delete those lines. Nothing has worked. I can post a jpg screen capture file of the "about:config" file if the sys will let me. Any ideas out there?
Steve

Go to Control Panel, click Programs (software).
Uninstall "Browser Manager" + "Bprotector" + "Object Installer" + "Babylon Toolbar on IE"
Then depending on which browser you use , follow the relevant steps:
----------------------Firefox ---------------------------
> Open a new Firefox window (website)
> Go to Tools> Options> and go to change your order, the Home. ( f.e www.google.de) and click OK.
> Remove the search engine of Babylon by clicking the small arrow next to the icon of Babylon
> Manage Search Engines
> select Babylon and Remove
> Close Firefox and open again
> write in the address Bar "about:config " and click Enter
> Write in the search engine "Babylon."
> Click on any 'Babylon' preferences with the right mouse button and select "Reset"
In the following video you can see how to change TAB URL :
http://www.youtube.com/watch?v=4yPX-ZJ5fQc&feature=related

Backups of the JVM.CONFIG file are not created

Backups of the JVM.CONFIG file are not created.
CF10 > Server Settings > Java and JVM in part says:
Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
CF10 Help page indicates jvm.bak will be created:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
Thanks in advance, Carl.

I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.

Grub uses wrong UUID and cannot create config file

I've tried performing an installation to a USB drive as per the wiki. Everything works up until I try to boot and grub tries to load the wrong UUID for my / filesystem.
My next step was to chroot back into the USB install and manually change the UUID to the correct one. Odd, as others have pointed out in this thread
the grub-mkconfig command should detect the correct UUID if run from within arch-chroot.
Anyway, after changing the UUID in /boot/grub/grub.cfg and trying to regenerate the config file with `grub-mkconfig -o /boot/grub/grub.cfg` I noticed the file had not changed. This is because the command is exiting successfully, but isn't actually writing any file. I deleted the file and tried the command again to be sure. No new file.
Next I booted into grub, using the config generated with the wrong UUID, and dropped to the shell using `c` -- I was able to load my install just fine using
set root=(hd0,gpt2)
linux /vmlinuz-linux root=/dev/sdb3 ro
initrd /initramfs-linux.img
boot
From there I tried removing the bad config file and recreating it using the `grub-mkconfig -o /boot/grub/grub.cfg` command... no dice. Does anyone know what is going on? At the least the command should tell me that it is failing, no?

Attached is the output of `grub-mkconfig` running from the chroot.
root@myhost# grub-mkconfig
Generating grub configuration file ...
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if loadfont unicode ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_archlinux ###

How can I completely remove Realplayer or other similar plugins from Firefox (I've deleted Realplayer and the Realplayer program files)?

Hello, I am finding that Firefox often hangs and says not responding when I try to open a new page, and also that it takes a very long time to clear cookies and cache. I have read elsewhere that the second problem can be due to plugins, and I have found lots of these, many of which I don't need like Realplayer. So I was wondering if there is some way for me to start from scratch without any plugins at all and then I can install any that are needed?
I have reset Firefox, uninstalled and reinstalled it and also deleted Realplayer and the Realplayer program files, but nothing seems to change (there are other plugins too which I don't think I use such as VLC Web Plugin - I only use VLC for DVDs - which could also be causing the problem).

You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
*http://kb.mozillazine.org/about:plugins
*http://kb.mozillazine.org/about:config
See also "Manually uninstalling a plugin":
*https://support.mozilla.org/kb/Troubleshooting+plugins

Does class-scheme in the coherence config file works for C++ classes?

Hello,
Does anyone knows if the class-scheme in the coherence config file works for C++ classes as well? In other words if I have a C++ implementation of com.DBCacheStore will it work?
<class-scheme>
<class-name>com.DBCacheStore</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>AAA</param-value>
</init-param>
</init-params>
</class-scheme>
Thanks,
Jay

931907 wrote:
Hello Robert,
I am refering here to both C++ client and Coherence Server. Will it work in either of the cases?
Thanks,
JayHi Jay,
Coherence server: it definitely won't do anything with C++.
C++ client: for the cache store of a local cache residing within the C++ client you may be able to specify it, but it will have nothing to do with the cluster itself. I never worked with the C++ client, so I can't guarantee you can configure it that way. Look at the following page for further documentation:
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_config.htm
Best regards,
Robert

Does BPM support the JAVA config file feature.

Hi ,
Does BPM support the JAVA config file feature? like based on env(local, dev, test, stage, prod) BPM aaplication can have different values for the same property/variable using the config file. How can BPM identify its env (local, dev, test, stage, prod)
Thanks In Advance!
Sreekant

931907 wrote:
Hello Robert,
I am refering here to both C++ client and Coherence Server. Will it work in either of the cases?
Thanks,
JayHi Jay,
Coherence server: it definitely won't do anything with C++.
C++ client: for the cache store of a local cache residing within the C++ client you may be able to specify it, but it will have nothing to do with the cluster itself. I never worked with the C++ client, so I can't guarantee you can configure it that way. Look at the following page for further documentation:
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_config.htm
Best regards,
Robert

MAMP and the scary config files

Similar Messages

Maybe you are looking for