Manage Bulk scanning\upgrade of branch switching infrustructure.

Hi Guys Im new here so please go easy....!!
We have a lot of Cisco Kit Access Points Storage Switches, Core Switches Switches and branch switches.
Now every thing in our Data Centre has been kept tickitety boo, and the routers at our branch sites well the management there is outsourced so has already been taken care of.
HOWEVER:
The Remote WAN switches have never been patched or firmwared or anything but i need a couple of pointers to begin with please..
Ive tried Network Assistant which dosnt seem to be too usefull.
We have about 48 different subnets which i would like to scan whiuch tool would be best to do this with..
TIA
Paul

Hi Paul,
What do you want the scan to accommplish, provide Inventory type data?
I think SmartCare might provide what you're looking for. Either that, or LMS. Those are Cisco-focused apps that include vresion and config management pieces covering memory, versions, compatibility, bug reports, and Secuity (PSIRT) information so you can keep everything in line.
I think the alternative usually involves some scripting and using features of IOS such as EEM. If you have the time for some administrative overhead of designing your own NMS tools... newer IOS features are really cool!
Curtis

Similar Messages

DMS (Document Management System) scanning Hardware and Software

Dear everyone
We are locking for a DMS system.
Requirements are:
1. Document Scanning Hardware and OCR Software. Automated metadata detection.
(Documents should automatically be assigned in Sharepoint)
2. Workflow management with Sharepoint and binding over WebService to Backend ERP and CRM System.
Where can I
find examples or case studies. Has anyone experience with such systems
(particularly scanning and document preparation 'OCR')
Regards
Kruljac Marijan

Are you looking for a bulk scanning and indexing software with data extraction capabilities? Do you want to scan and post documents and content to SAP, SharePoint or your DMS,
etc.?
Newgen offers OmniScan , a globally renowned, powerful solution for your enterprise wide scanning and content capture needs.
OmniScan can be used to scan paper documents, document images and forms. It can index them with business values and
export to other enterprise systems such as SAP, SharePoint, DMS, ERP, etc.
http://www.nwgn.us/1fxeP7O
Regards,
Shreya Muralidhar

Bulk Firmware Upgrade Option in Systems Settings Tab

Has anyone tried to use the bulk firmware upgrade option in the Systems Settings tab? I was able to get all the set up done and chose the 8 cameras that I needed to upgrade. The job seemed to finish successfully. However when I checked the firmware on the 8 cameras that needed the upgrade, THEY WERE NOT UPGRADED!! Instead of upgrading the cameras selected via checkbox, the job chose the first 8 cameras on the original 2600 model list, completely ignoring the cameras that I had actually SELECTED FOR THE UPDATE!!!
Is anyone else having trouble with this dialog?
Cisco, can you repair this ASAP!!!
Thanks.
ka

Kim,
We've experienced the same problem and it is very frustrating. We had to modify the bugfix workaround because it didn't quite work for us either. Here's what we found.
- It doesn't matter if you sort by column name or not; the utility will randomly pick a camera from the filtered list.
- If you write a filter that captures all of the cameras you need to update, and update all of them, it will update as expected.
- If cameras are failing using the utility, check to see if you can install manually. You may be getting bit by the "Bad Magic Number" bug, which requires you to set your camera name back to it's default.
We found ourselves updating all the cameras for a specific location with the same model all at once. We'd schedule a brief downtime with the department and do it all at once. Of course, we tested this in a lab environment first to make sure the firmware didn't break anything.
As for "Not In Recommended Firmware", this worked for us on 4500E cameras as long as we specified what our "Recommended" firmware was under the "Manage" firmware tab.
This was all using 7.2.0. We haven't installed any firmware updates since going to 7.2.1.

Solution Manager 7.1 upgrade,j2ee_admin is locked

Hello ,
I am in the middle of solution manager 7.1 upgrade and running into execution phase now. but my j2ee_admin password is locked.
I want to unlock and reset the password but this is what happening .:
1. I try to login with old j2ee_admin password but it is not correct.
2. I re-check with updating same to configtool but no luck
3.I have enabled emergency SAP* ID and can login to Visual Admin so
4. when I try to access UserAdmin so that I can unlock j2ee_admin it gives me error as Application error occurred
during request processing
Is there any way to reset /Unlock j2ee_admin even though NWA/ user admin is not available.
Please help me so that I can move ahead with upgrade
Thanks,
Supriya

Hi Supriya,
Hope you are doing good.
What is the status of the upgrade; is the UME still ABAP ? If so just login to the backend ABAP server/client and unlock j2ee_admin.
Else login to visual admin and there is a security provider in the services where you can unlock the user.
Hope this helps.
Kind Regards,
Hemanth
SAP AGS

Branch switching: closed projects

I'm a new user with EGit (after years working with Subclipse).
What I like very much with git, is the easy and fast way to switch from one branch to another. This is also a feature of EGit. But, there I have some problems.
We have an Eclipse workspace with about 80 subprojects belonging to our application. Recently, we changed subproject names in development branch for some reason. So, now I have the uncool experience that after changing the branch my Eclipse workspace comes with compile errors. Obviously this is due to the fact, that projects, which the former working branch did not know, are presented as closed projects after branch switching . And, vice versa, projects, which are not existing in the branch where I switched to, are still visible in the Eclipse workspace, although as closed projects. On disk I can see, they do not contain source folders, they only the "bin" have subfolders with compiled classes.
This is not consistent to using git on command line. If I do a checkout on a branch, the work area is truely clean, no project folders are existing which do not belong to the current checked out branch.
Maybe I'm doing something wrong? Any tips welcome.

more than 4000 views! and no answers?
interesting

Stuck with Management mode firmware upgrade..see pic

Management Mode
Firmware Upgrade
File Name:___________________ Browse
Apply Reset
How do I get around this. I upgraded to WRT54Gv5v6_1.02.5.002_fw.bin and now when I reboot this is all I get. If I try to go to another version I don't get connectivity. I only have connectivity for this part then I lose it.
Every time I type in 192.168.1.1 I always get this display....
I've tried to hold the reset up for 30sec the first time then 1min.......then unplug for 10 to 20 seconds, (still holding down the reset button) and reconnect. Letting go of the reset button once it's connected.
Is the router gone? Will I have to get another one? Would like to get your input.
Thanks

Download firmware file again. And browse for it, and upgrade it. Reboot router, it might work.

Solution Manager 3.2 upgrade to version 7.0

Hello All,
I am in the Solution Manager 3.2 upgrade to version 7.0.
In phase IS_SELECT "Upgrade Assistant" asks to add a few files update
components (Attachment: screens). Two of them (ST-SER and CPRXRPM) I
managed to find and read.
However, in the SAP Service Marketplace I can not find the new Add-On'ów:
ST and ST-ICO.
(For example:
ST - 400,
ST-ICO - 150_700)
Can I skip them in this step and leave the current versions?:
ST - 320 level 19
ST-ICO - 150_620 level 10
Best regards,

Those are part of the normal "upgrade" package - I wonder which DVDs you used to start the upgrade...
SAP Solution Manager 4.0 Upgrade (2) 1 of 11
etc.
Are you trying to do a Netweaver upgrade? This won't work...
Markus

Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.

Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.

You might give VueScan a try. It should work with your scanner. There's a demo version that you can use initially.

Replenishment From SU Managed Bulk Storage Type

Hi Experts,
We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
Our scenario is the following:
We have a SU Managed Bulk Stype: Stype 702
We have a SU Managed Stype with Putaway Strategy "P": Stype 701
We have material 11000026 and we define the following in WM View 2:
Max Qt: 6000
Min Qt: 2000
Replenishment Qt: 3000
Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
So far we have done the following:
Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
We assigned the SType Indicator to Material in WM View 1.
Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
(The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
Thank you,
Leonidas Oyaga

Hi Mihailo,
Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
(Before doing this, I deleted ID Point 711 from SType 701).
I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
For Instance:
Material 11000026 Stype 701
Min Qt: 2000
Max Qt: 6000
Replenishment Qt: 4000
Storage Bin Capacity in 701: 1000
When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
Best Regards,
Leonidas Oyaga

Why is there an $50-80 upgrade fee to switch to quantium?

Why is there an $50-80 upgrade fee to switch to quantium? Why there even be any fee to upgrade if im intalling it myself? I want to get the better DVR but i dont know if its worth paying the ugrade fee ontop of paying like $11 more a month on top of my current DVR change.

I beleive that some cell phone providers are charging upgrade fees as well when you upgrade your phone.
So unless you want to keep jumping providers or not get new functionality, you are stucking paying upgrade fees.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Config Manager 2012 client upgrade (via package with batch commands)

Hello all,
I would like to kindly ask for your help with my question regarding a SCCM 2012 R2 client upgrade (from RTM to R2)
Recently, we have upgraded from RTM version of SCCM2012 to R2 (with the PXE hotfix applied)
During the process, I have choose not to upgrade clients when the SP1 was applied and go straight for the R2, which is not a problem I believe.
My question is regarding the pre-created packages, that are showing up in the console. I believe, that they are the easiest way to upgrade clients via packages in SCCM. (we can't push the installation due network policy)
This hotfix is stored here: \\"FQDN_site_server"\SMS_TSP\hotfix\KB2905002\Client\x64 (in case of x64 version, x86 is the same but x86 in the end)
The executed file from this path is this with this command following:
msiexec.exe /p configmgr2012ac-r2-kb2905002-x64.msp /L*v %TEMP%\configmgr2012ac-r2-kb2905002-x64.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
Anyway, when we install the clients when we deploy it for the first on a machine, that has no client or we reinstall it, we do it with help of this batch command:
set curdir=%~dp0
%curdir%ccmsetup.exe SMSSITECODE=TSP /NoCRLCheck /UsePKIcert /forceinstall SMSMP=HTTPS://CML.LTSPRAGUE.CZ CCMHOSTNAME=CML.LTSPRAGUE.CZ
I just need to know, if I can use the prepared package from the console in our case and if it will keep the settings when the package is deployed.
I belive I have found a similar questin here on the forums:
http://social.technet.microsoft.com/Forums/en-US/c9b40687-1843-44c7-b61b-fd26d53ab90b/cumulative-update-3-and-agent-upgrade?forum=configmanagerdeployment
The second answer might the answer I'm looking for, but can you explain that to me like I'm five years old? :)
Please, let me know.
The IT guys from LukOIL

I'm not sure, because of my short time at the company, but there are historical security reasons for setting the push installation off.
Second reason are strict firewall rules used here. SCCM Agent may contact site server through HTTPS - that is a one way communication, so push installation isn't possible.
Don't mix "client push" and "automatic client update". See
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/09/09/using-configuration-manager-automatic-client-upgrade-to-upgrade-to-the-latest-system-center-endpoint-protection-client.aspx for further details. (And yes, the article talks about SCEP, but
it also tells details about the entire process)
Torsten Meringer | http://www.mssccmfaq.de
Thank you for the article and your, but I find it easier to deploy packages right now.
I have found out, that there is a folder named "ClientUpgrade" in ConfigMgr installation folder.
I used this and made a package out of it. Deployment went fine as well as the installation of the upgrade for the client, but there is a problem now, that I don't see any software in the "Software Center" in "Available Software" - and there should be, since
I have may SW pointed to me and the list was populated before I have done the upgrade to the new version.
This may be a simple problem, but I really don't know what's wrong.
The IT guys from LukOIL

Extension manager would not upgrade. Alert box states could not move old extension out of the way. Suggestions?

Extension manager would not upgrade. Alert box states could not move old extension out of the way. Suggestions?

What you said confused me. Which version of Extension Manager do you use? Could you please attach a screenshot?

Can no longer use HP device manager to scan to OCR

Today I tried to use the HP device manager with an HP J4550 all in one to scan a document to OCR. Not only could the scanner not be found, but the HP device manager also crashed... I used to be able to do this prior to upgrading to Lion. Is there a fix somehow or somewhere?
24" iMac with 2.8Ghz Intel Core 2 and 4Gb of ram...OS X 10.7.2. I should add that printing works fine, I can just no longer scan using Photoshop Elements 8 or the HP scanning software inside of the hp device manager..

No I didn't but I finally DID try HP scan instead of Scan Pro in the Hewlett Packard folder located in the application folder and was able to scan to an RTF file with the OCR doing quite well in the process. I haven't done this in some time and perhaps before I also used HP scan to do OCR scanning. Bottom line, I am able to do again what I wanted to do...

Desktop Manager 6.x & upgrading Device Software

Hopefully someone can provide me with a few pointers on how this works properly in Desktop Manager 6.x. Its probably straightforward.
In desktop Manager 5.x and probably 4.x from memory, if you wanted to upgrade the device software on your blackberry, you would download the package, install this on your PC, open Desktop Manager, plug the Blackberry into your PC and follow a few prompts and then the upgrade would go through. If you had any issues, the biggest was that maybe you would have to delete the file located here, 'C:\Program Files\Common Files\Research In Motion\AppLoader\Vendor.xml'.
Now under Desktop Manager 6, even though I have installed the Device package on Windows, Desktop Manager seems to always go to the internet and get what it thinks is the newest version. Now sometimes this is newer or sometimes older than the version that is approved by my telco.
So how do I stop it going to the internet & how do I make it install the version that I have downloaded and installed on my PC? Anyone?
Thanks,
Gareth

Hello,
You've got almost everything you need...the only difference is that you want to skip the Desktop Software and instead run the LOADER.EXE application directly. See this:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Two questions when upgrade SG500X-24P switch Firmware

Below is my switch detail information,
System Description: 24-Port Gigabit PoE with 4-Port 10-Gigabit Stackable Managed Switch
Firmware Version (Active Image): 1.2.0.81
Firmware Version (Non-active): 1.2.9.44
Boot Version: 1.2.0.12
Q1: upgrade FW to sx500_fw-12944.ros and active image-2 then reboot switch.
      after switch reboot, GUI still show Active Image is 1.2.0.81.
Q2. when try to upgrade FW:Sx500_FW_1.3.0.62.ros. GUI show FW format error.
I have try to upgrade from HTTP/HTTPS and TFTP, but got same result.
thanks.

Hello Joshua Roeder,
of course, I click Apply before rebooting.
and the firmware info after rebooting is:
             Firmware Version (Active Image): 1.2.0.81
             Firmware Version (Non-active): 1.2.9.44
one thing i don't understand is i have to set my default password again when login to GUI after reboot.
error messgae for my Q2:
Upgrade/Backup Firmware/Language
Bytes Transferred:
0
Status:
Copy failed
Error Message:
Copy: Illegal software format
thanks again.

Manage Bulk scanning\upgrade of branch switching infrustructure.

Similar Messages

Maybe you are looking for