Manage "Change PC settings" in Win 8.1 using PS

how to manage "Change PC settings" -> Privacy in Win 8.1 using Powershell. Thanks.
-ss

That's a pretty broad question. What are you trying to accomplish?
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Similar Messages

Changing Connection Settings on Thin Client T410 using HP Device Manager

Hi All,
Actually it is not a problem rather than it is an inquiry regarding configuring connection on HP thin clients- t410 remotely using HP Device Manager Tool or any other tool,
My inquiry is: in our organization we have around 500 t410 thin client or more, and we need to change the remote connection server address or name (connection type is RDP7) on these clients, as currently we have to do it on the remote clients one by one using shadowing option as detailed below steps (which of course is not convenient way).
Currently we have the HP Device Manager v. 4.6.
Steps:
1- Click on “setting” and select “Administrative/User Mode Switch
2- type admin. password.
3- Click on setting as below and select “Edit Connection Setting”
4- Under Conncetion Settings > Network > change the Address to x.x.x.x
5- press OK then Reboot
Thanks in advance and let me know if you need more details

any one has info about this post, please his feedback

Changed Permission Settings: "System extension cannot be used"

I was having some weird problems with file sharing on my network recently, so I tried changing around some of the permissions on my drives to see if I could resolve it. For some reason I was getting messages saying I didn't have permission to copy files from one computer to another on my network. This seemed to come on randomly as we have been doing file transfers this way for quite some time now. I looked at our file sharing preferences in the System Preference's and added all 4 drives from my Mac Pro in there and made sure that my username had full read and write capabilities. I then tried logging into my Mac Pro from my iMac, just like I've done in the past, and I was still unable to copy the files. So I removed all the folders and turned off file sharing. I then clicked 'Get Info' for my main Macintosh HD and tried changing the permission settings there. I clicked the option to make my username the owner, and then I clicked 'Apply to enclosed items...' and this brought up a progress bar that I let go for about 10 minutes. Then I got a pop-up error message stating "System extension cannot be used" and had an extension path listed underneath, saying it was installed improperly and cannot be used. This happens an endless amount of times. It seems to be giving me this message for every single extension on the computer. If I hold down enter the pop-ups just keep coming with different extensions listed.
I hope someone with some insight on how permissions work in OS X Lion can give me some advice on how to resolve, and possible the correct way I should be setting up sharing if I've been doing wrong all this time. What strikes me as odd is that I never had any issues with sharing anything up until about a week or so ago, and I can't remember if there were any system updates that I installed that might have something to do with this.
Any help is much appreciated, thanks!

I had this problem recently in addition to my laptop getting stuck on the Apple logo and spinning icon. It took me a long to time to work through it so I thought I would share what I did to make it easier for others.
The best thing to do when having permission problems is to do a 'disk permissions repair'. You can do this using the disk utility app found in your applications/utilities folder. This will attempt to rewrite all the permissions that were incorrectly set. When it is doing this it is common to get a message saying 'ACL...found and not expected...' do not go and delete these files. Its normal for this correction process to take more than 30 minutes, for me it took an hour.
If this proccess doesnt work for you than you can also try a disk repair.
If you can't boot using the normal disk you can also access this program through the recovery boot (holding Command-R of Option at startup), through the safe mode (holding Shift on start up) or through a recovery CD. You can also boot in a terminal type mode but this is a last ditch effort as a misspelt command could do more damage. personally, because I do not know what the commands I am using actually mean, I would recommend talking to a person at apple then using this approach.
Hope this helps

I am unable to retain my Settings Manager changes for Adobe Flash version 9.0.124.0

Hi there:)
Every time I log out from the Adobe online Settings Manager
and then check the settings at a later stage the changes that I
made earlier have not been retained?
Has anyone else experienced a similar problem and if so is
there a solution?
My version of Adobe Flash is 9.0.124.0. Before installing
this version I uninstalled the old version using the latest version
of the Adobe uninstaller ( after 8/4/08 ).
Any help or advice will be much appreciated.....
Howard:)

Dear all!
May I ask you for some help here?
I do not have any problems with the player so far, but can
not change the settings online, because there is no picture of the
settings manager. Only a download button to download flash player
once again.
What is wrong with my installation? I just don't know.
I am using Windows Vista basic and Mozilla Firefox 3.0 or IE
7.0.
My internet provider is T-Mobile with a wireless connection
called Web 'n' Walk box home.
Wherever I go online instead of my home's laptop I will find
the setting manager alright!
Help is very appreciated.
Petra

I have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot see to do it help please

i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?

Mail/Preferences/Accounts
Use the - and + signs to delete or add your new Accounts
see
http://support.apple.com/kb/PH4928
Mac 101
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts

Possible in any way to change tcpackfrequency/tcpnodelay/other network settings in win 8.1?

As far as I've been able to find, pretty much everything has been locked down in windows 8+ regarding network settings (templates) in general which were earlier easily editable by either netsh or going into the registry.. unless you're running a server
version, which of course most aren't.
Why was this even done? Not like the normal user will accidently change these settings, for power users, as a gamer myself, I would like to tweak everything possible to get the lowest ping since this is one of the few things you can do on your own side that
affects it at least a decent amount, except for having a good router and whatnot. The larger part is up to being lucky with your isp.
So please make it possible to activate and edit the InternetCustom in normal setups.
If it's not possible to do this for whatever reason, please at least make a specific template for low ping desired setups as a gamer, like InternetGaming or similar.

Hi,
I am afraid that this is designed by default considering the usage of this feature on Windows client.
Thanks for your understanding.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Changed Security settings, now cannot connect

Hi,
I was trying to increase my security settings on my WRT54G v. 8 and somehow have messed up my connection. I updated the MAC settings so that only my computer has access, and I tried to change my WEP from 64 to 128 bit. I now realize I should just change it to WPA, since it is much more secure. Now my wireless is not working, saying limited or no connectivity because it couldn't assign a network address, I believe (It looks like I don't have an IP address??). When I use my wired internet and type in the default wireless IP address, it says that the connection is not valid or some such thing (sorry, I am not on my home computer now) and I cannot get in to change the settings again. Do I need to reset the router and reset all my settings? How can I reconcile new security settings with my computer? Thanks!

To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or the "Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default wireless settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
If you have trouble connecting, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. You should reconnect automatically (it can take up to two minutes). If you still have trouble, temporarily turn off your computer software firewall.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2 in Win XP. Vista already supports WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.
Message Edited by toomanydonuts on 01-27-2010 04:53 AM

Change of settings in OMSY

hi
My Functional consultants are having a problem.
in tcode OMSY (Material Management View on Company Codes)
My Functional Consultant guy entered the YEAR and PERIOD as 2006 and 01 respectively.
Now he wants to change the settings to 2006 and 10.
How to do that.
Pls help me.
Deepak

hi christian
Thanks for answering my query.
This problem was solved by my functional consultant.
the way they solved it is as follows:
1 in mmpi they had entered the current year and period
that is 2006 and 01 and initialized.
2 in mmpv they entered the year and period in accordance with V3.
Thats it
but technically you are correct.
Thamks
Deepak

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fine

Hi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

I updated the kmp player a few days before. It changes some settings on my firefox

I updated the kmp player a few days before. I believe that It changes some settings on my firefox or more.
It changed my home page. Also, every time I reopen firefox, it cannot show my windows and tabs from last time.
Then I removed or stopped using the plug-ins in firefox (one of them is npAPI) that installed that day, changed the setting back to what I want.
I can then get the home page back, but the problem that I cannot get my previous tabs when I open firefox back still exists.
I have updated firefox to 25.0 today.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How do I make changes to Flash (or Win 7 OS) so that Flash always invokes at "HIGH" cpu priority?

How do I make changes to Flash (or Win 7 OS) so that Flash always invokes at "HIGH" cpu priority?
Streaming videos "burp" otherwise and I have to make the cpu change manually via Task Mgr

http://www.askvg.com/how-to-permanently-set-process-priority-in-windows-task-manager/

Changed computer settings. Now I cannot print. Please help!!!

In an attempt to make my machine faster, I changed the settings of a few services on my Dell Studio Laptop (running Vista).
Everything is working fine with the exception of my J6450 Wireless Printer...and it worked fine before the reconfig.
It still works (made a b/w copy to enure it wasn't the machine that was broken).
It seems to connect when I start my computer, however when I print, I get a simple "Error - Printing" notice in the printer dialogue box.
I have reconfigured all HP related services in the computer management console, however the error remains.
Is anyone aware of a specific service that should be running or configured a specific way? Perhaps one knows of another forum where I could share the services running to get more focused advice?
Many thanks!!

i have the same problem , was working fine before then i changed my password & cant get it to connect now .
have deleted the hotmail account & tried adding again this doesnt work
any ideas anyone ?

Any printer UI for change printer settings?

Since Solaris 10's printing system is powered by PPD files. (at least for some printers). I suppose I can access all features PPD file provide: Change page size, input-tray, output-tray, color-mode, etc.
Is there a GUI that comes with Solaris that can help me change printer settings? (The printer manager is useless)
How do I tell what command line option a PPD file provides? (Yes, I can write my own script to parse the PPD file for OpenUI, CloseUI), but what's Sun's solution for it?

/usr/sadm/admin/bin/printmgr &
Don't ask me why it's in a weird location.
It's the Best GUI In The World -
gives you the option of a console
window, so you can see what it's
doing on the command-line in
response to your button-clicks.
Dunno about the PPDs.
cheers.

Manage "Change PC settings" in Win 8.1 using PS

Similar Messages

Maybe you are looking for