Manage client in parent domain from child domain

My site has a root domain (mydomain.net) and a parent domain (ent.mydomain.net).
My primary SCCM site is installed in ent.mydomain.net and is managing all my clients.
I have 4 DC's installed in mydomain.net that I would like to manage from my child domain (ent.mydomain.net).
It is my understanding that if the schema has been extended in the parent domain, and I manually install the client on the DC, it should be able to be managed from the child domain.
I have installed the client in the parent, but it cannot find the site in the child (I have not extended the schema yet). i know that the client will not be able to find the site until the system management container has been created and populated
(does not currently exist). I know that I can create the container, but how would it get populated with the correct site information.
If anyone has any experience with this kind of configuration, the help would be appreciated.
Thanks

i know that the client will not be able to find the site until the system management container has been created and populated (does not currently exist). I know that I can create the container, but how would it get populated with the
correct site information.
You could enable AD publishing to that domain, but site assignment is also a matter of site assignment boundary groups. You can also assign a client to a site manually though.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

SCCM 2012 root domain client management from child domain

Hi All,
We have SCCM 2012 environment in Child domain and we would like to manage the root domain clients as well. we are using https mode. What all configuration do we need to make for root domain clients to monitor successfully from child domain.
Is it mandatory to create System Management container for the Root domain? if yes what all permission i need to give for that System Management container.
Do we need to enable Active directory forest discovery?
Regards,
Bhaskar K

No, you do not need to create the System Management container or publish info into it and no you do not need to enable forest discovery.
ConfigMgr ultimately does not care about AD. AD can be used by clients to help them locate services and configure themselves, but this can also be accomplished in other ways in ConfigMgr.
Jason | http://blog.configmgrftw.com | @jasonsandys

Active Directory Domain Services Child Domains

I am using Windows Server 2008 R2 SP1.
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
When I select "Add Roles" I click on "Active Directory Domain Services (Installed)" the "Next>" button is not enabled and can not be selected.
Did I install ADDS wrong?
Is this not how you define Child Domains?
If I use the Command Line or Answer File Methods I get an error message at "ChildName".
Did I forget to install something about enabling Child Domains when installing ADDS?

Hi,
Did you try to create a child domain on the Domain Controller? It seems like that this Server is already a DC, with Active Directory Domain Services installed.
We don’t have to enable anything in the root domain for creating child domains/new trees, we just need to run
Dcpromo or Add Role on another server which is not a DC, and select the existing domain as its parent, then the child domain will be created.
In addition, please make the existing DC as the preferred DNS server on the new server.
I hope this helps.
Amy

List of Domains and Child Domains

I am working in Windows Server 2008 R2 SP1.
Is there a way to list Domains and Child Domains entered this way:
http://technet.microsoft.com/en-us/library/cc731541(v=ws.10).aspx

Hi Philosophiae,
Please refer to the cmdlet
Get-ADDomain on server 2008 R2, it will get abundant domain information.
Best Regards,
Anna

Time Sync from Child domain to Parent doamin

Now the time in our child domain is fast 2 Mins than parent domain, how to sync the time by what command ?

Hi,
By default, the PDC Emulator of the Forest Root Domain is considered as the best time source in an Active Directory forest. Other domain controllers
in the Forest Root Domain use it for time synchronization while domain controllers in child domains use the PDC Emulator or any domain controller from parent domain for time synchronization. Member servers and Workstation use domain controllers in their domain
for time synchronization. With this hierarchy, we can maintain a reliable time synchronization system that allows avoiding Kerberos failure issues in an Active Directory domain. This configuration is by default in an Active Directory forest and does not need
to be changed.
As mentioned by SH.Hashemi, we can run command
w32tm\resync to resynchronize the clock as soon as possible, disregarding all accumulated error statistics.
Regarding time synchronization in active directory, the following articles can be referred to for more information.
Time Synchronization in Active Directory Forests
https://social.technet.microsoft.com/wiki/contents/articles/18573.time-synchronization-in-active-directory-forests.aspx
How the Windows Time Service Works
http://technet.microsoft.com/en-us/library/cc773013(v=ws.10).aspx
W32tm
http://technet.microsoft.com/en-us/library/bb491016.aspx
Best regards,
Frank Shen

User Migration from Parent Domain to Child Domain..The user is enabled with Exchange 2010 Mailbox in Parent Domain

We currently have a single Windows 2008 R2 Active Directory domain controller, and an Exchange 2010 server. We are in the process of adding a child domain on a second Active Directory server for an offsite office location for a subdivision of our company.
The two locations will be connected via VPN.
Currently users exist on the root domain with Exchange accounts who will be moving to the new offsite company/location. We would like to be able to move these user accounts to the child domain while maintaining their existing Exchange mailboxes and
email addresses. Is this possible, and if so how would we do it?

Hi Srinivasa,
According to your description, I think you have done all the preparation.
For DL migration, the following article may give your some hints:
How to Migrate Distribution Groups Across a Forest
Good Luck!
Niko Cheng
TechNet Community Support

How to manage one domain from another domain

I have created 2 domains domain1 and domain2. I deployed a web application in domain2 and created a managed server "newManagedserver-1" to run the application. From admin console of domain1, I need to control ie start/stop managed server "newManagedserver-1" created in domain2 by using the Node manager.
Please let me know if its possible and if so, please let me know the steps.

855557 wrote:
Ok thanks for information. I have following questions:
1)Is it possible for same domain to exist on more than 1 physical machine. I mean lets consider I create a domain domain1 in physical machine1 and same domain1 in physical machine2. Can I monitor managed servers of physical machine2 from admin console of physical machine1. Paths of the domain1 on both the physical machines being same(C:\bea\user_projects\domains)
2)If the paths of domain1 on both physical machines is different(for eg C:\CLOSR\install1\appserver\autodeploy\domain1 and C:\CLOSR\install2\appserver\autodeploy\domain1), then will the node manager functionality with admin server of machine1 and managed servers on machine2 work?---We can create one domain (domain1) and have different managed servers on two different physical machines.
Which means create a domain on machine1,and while adding a managed servers to that domain,
1)create 1 managed server (MS1) and provide the IP address of the same box(machine1)
2)create second managed server (MS2) and provide the IP address of the second box(machine2)
In this way we can create two managed servers on two different machines (machine1 and machine2), and as per your requirement monitor/manage the managed servers from machine1.
We don’t need to create a domain on another machine explicitly,however this configuration need few steps to be performed.
This concept is called Horizontal cluster,Following forum link will explain the same in detail.
Vertical and Horizontal Clustering
---Regarding having different paths for the same domain on machine1 and machine2,
We will not create a domain on machine 2 explicitly; the concept is creating one domain but distributing it on different machines.
So paths of the installation or the directory where we have the managed sever will not matter here.
The node manager functionality will work, provided we configure it correctly.
Following link will help you understand this in a better way.
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/server_start/nodemgr.html
If you need the guidelines in node manager configuration (bit tricky) please let me know.
Edited by: user123456 on May 2, 2011 9:32 PM

Exchange management console unable to connect from another domain

Hi,
I cannot connect to Exchange using EMC
i have a root Domain A and the Exchange is in Domain B installed.
I cannot connect from Domain C
All Domains are in the same Forest

Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support

Domains and Child Domains

Hi guys
Just a bit of advice needed, we have our domain setup (test.com) running 2008 R2 and with 2dcs and all is well running 1200+ users and 500+ computers on the subnet 10.114.4.0/22, we need a branch office setup and want it managed separately with its
own dcs, would it be best to create a child domain (child.test.com) on a new subnet 10.114.8.0/19 or a new forest entirely?
Thanks
Al

I think you will have to define "managed seperately" to be able to give adequate advice.
Microsoft has changed Active Directory in subsequent versions to remove design needs for more complex setups like subdomains or even forests with trusts by removing limits and adding features to allow proper delegations. For example, teh amount of
objects Ad support has significantly increased, fine-grained pw policy is introduced, delagation has been made easy,...
You should only create another domain if you intend not to manage it from your side and/or do not want resources to be shared and/or connectivity is limited and replication traffic unwanted. Otherwise, in most cases, the proper design would be to define
a new site in the existing domain, put some dc's in there and put its resources (computers, users, groups,...) in a separate OU. You can delegate the management of the OU to admins in the branch office.
This allows for central administration (that can be enforcing), as well as autonomy for the local admins.
Another forest would only be the adequate design if both offices do not have to communicate at all.
http://technet.microsoft.com/en-us/library/cc731718(v=ws.10).aspx
MCP/MCSA/MCTS/MCITP

Migrating 2 domains into child domains in a new forest

I have a unique senario in which my company merged with another.
My Company:
Windows 2003 AD
Exchange 2003 SP3
192.x.x.x
New Company
Windows 2008 AD
Exchange 2010
10.x.x.x
Each domain has its own resources, servers and workstations. For political reasons we still need some management seperation.
My Goals:
Create a new root neutral forest/domain.
Migrate both domains to 2 child domains under this new root
Bring the domain to 2012 R2
Create a single Exchange 2010/2013 cluster with all mailboxes
What is the best way to accomplish this? Where exactly does Exchange sit?
Thanks!

Hi,
>>What is the best way to accomplish this?
In Active Directory, we can use ADMT to do the migration. However, if we need Inter-forest migration from Domain Controller 2003 to Domain Controller 2012, at this time MS
has not ADMT for Windows Server 2012. We can downgrade our forest and Domain functional level to Windows Server 2008 R2, add an additional Domain Controller 2008 R2 and use ADMT 3.2 for migration. After migration is completed, we can demote Domain Controller
2008 R2 and raise again FFL & DFT to Windows Server 2012.
Regarding specific procedures for performing the migration, the following article can be referred to as reference.
Interforest Migration with ADMT 3.2 - Part 1
http://social.technet.microsoft.com/wiki/contents/articles/11996.interforest-migration-with-admt-3-2-part-1.aspx
Interforest Migration with ADMT 3.2 - Part 2
http://social.technet.microsoft.com/wiki/contents/articles/16208.interforest-migration-with-admt-3-2-part-2.aspx
Interforest Migration with ADMT 3.2 - Part 3
http://social.technet.microsoft.com/wiki/contents/articles/16621.interforest-migration-with-admt-3-2-part-3.aspx
>>Where exactly does Exchange sit?
For mailbox migration, in order to get better help, we can ask for suggestions in the following exchange forum.
Exchange Server 2013- Setup, Deployment, Updates, and Migration
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdeploy
Best regards,
Frank Shen

How to obtain parent record from child record in relationship using API

Hi,
I have a record in the main table that is the child in a parent/child relationship to another main table record. Using the Java API, how would I obtain the parent record in the relationship where I am starting with the child record? In the API there seems to just be calls for getChildren, but not a getParent type call.
Appreciate any immediate help that can be provided.
Thanks,
Eddie

Hi Eddie,
Please follow the below steps to retrieve only parents of a child Record.
1. Create RetrieveRelationshipsCommand.
2. Set the parameter RelationshipId.
3. Set the parameter Anchor Record and Anchor Record Id. In this case the child record for which parents records to be retrieved.
4. Set the parameter setGetChildren as false . This retrieves only the parent records for the specified child reocrd.
5. Execute the RetrieveRelationshipsCommand.
6. Retrieve member records from above step.
Hope it helps
Regards,
Neeharika

ContentSubmitters AD group: root domain or child domain???

Hi
We have an empty root domain. Mailbox users & Exchange 2013 servers are in a child domain.
As per Microsoft's documentation; we want to create the "ContentSubmitters" group in AD for content index to work properly (article 2807668). However I do not know where to create it!!! The article doesn't address it.
Does it go on the root domain where default exchange groups reside OR OR OR OR OR does it go on child domain where exchange servers reside?????
Thanks

Hi,
Agree with Riaz, you need to create the ContentSubmitters group on the domain that Exchange server is installed using Active Directory Users and Computer (ADUC).
What's more, when you create the active directory security group called ContentSubmitters, follow the steps below to grant Admistrators and NetworkService full access to the group.
Right click the group -> Properties ->Security tab -> add those two groups -> give them full control to the group.
Here is a thread for your reference.
Exchange 2013 Content Catalog Index Failed All Databases
http://social.technet.microsoft.com/Forums/exchange/en-US/fccf9dca-b865-4356-905b-33ac25dcc44d/exchange-2013-content-catalog-index-failed-all-databases?forum=exchangesvravailabilityandisasterrecovery
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

RemoveChild in parent.swf from child.swf (AS3)

Hi! How do I remove a child from a parent timeline with an externally-loaded swf? Specifically, I have a main.swf that loads movie_1.swf and movie_2.swf. In the movie_1.swf, I have a button to remove movie_2.swf from main.swf.
//--------- main.swf code:
var loader1:Loader = new Loader();
var loader2:Loader = new Loader();
loader1.load(new URLRequest("movie_1.swf"));
loader2.load(new URLRequest("movie_2.swf"));
addChild(loader1);
addChild(loader2);
//------------- movie_1.swf code:
removeMovie2_btn.addEventListener(MouseEvent.CLICK , removeMovie2);
function removeMovie2(event:MouseEvent):void
this.parent.parent.removeChild(this.loader2); // this does not work (get error code 2007, "Parameter child must be non-null")
// Thank you!

Here's how your code will change:
//--------- main.swf code:
var loader1:Loader = new Loader();
var loader2:Loader = new Loader();
loader1.contentLoaderInfo.addEventListener(Event.COMPLETE, assignMovie1Listener);
loader1.load(new URLRequest("movie_1.swf"));
loader2.load(new URLRequest("movie_2.swf"));
addChild(loader1);
addChild(loader2);
function assignMovie1Listener(evt:Event):void {
      MovieClip(evt.currentTarget.content).addEventListener("eventTriggered", removeLoader2);
function removeLoader2(evt:Event):void {
      loader2.unloadAndStop();
      removeChild(loader2);
//------------- movie_1.swf code:
removeMovie2_btn.addEventListener(MouseEvent.CLICK , removeMovie2);
function removeMovie2(event:MouseEvent):void
      dispatchEvent(new Event("eventTriggered"));

How to identifing the parent report from child report in RRI

Hi Floks,
Long back we have created one RRI report(which is having parent child relation).Now i have child report with me,i wanted to know the corresponding parent report.Please give me some inputs to identify this.
Regards,
Satya.

Check in these tables:
RSBBSQUERYDIR
RSBBSQRYMAPPING
Also check in table RSBBSQUERY to get the source and target of the RRI interface.
Pravender

How to choose correct domain from 2 domains

Hi All,
There are 3 domains (bmp, eai and wli) in 2.1. Can any one point me to the documentation
that throws light to how to choose a correct domain for your needs?
Thanks,
Parag

Parag,
Here is some light:
bpmdomain is configured with BPM only.
eaidomain is configured with AI and BPM. This includes the AI and DI BPM plug-in.
wlidomain is configured with AI, B2Bi, and BPM. This includes the AI, DI and B2Bi BPM
plug-in.
samples is configured like wlidomain but has sample data associated with it.
You can always read the config.xml for each domain and see what applications get deployed
when the domain server gets started.
Hope this helps.
Chris
Parag Gandhe wrote:
Hi All,
There are 3 domains (bmp, eai and wli) in 2.1. Can any one point me to the documentation
that throws light to how to choose a correct domain for your needs?
Thanks,
Parag

Manage client in parent domain from child domain

Similar Messages

Maybe you are looking for