Manage Dispute Case after data migration

Dear all,
Iu2019m facing the following problem.
Iu2019ve all the Dispute case in a Financial Supply Chain System (APJ).
Customer Line Items are, instead, in the Financial System (AP3)
After a Data Migration, all my line item will be migrated in to a new system (BD3) but without the Dispute Case.
There is a a way to link massively items with Dispute Case or users must proceed one by one ?
Thanks in advance
Alberto

sounds like changing the ALE from system 1 to the other system.
However I doubt it will be that easy.
I believe that could should contact SAP SLO to work out the best route for data migration.

Similar Messages

Data Link after data migration

Hello All,
In a scenario during data migration from R/3 to Ecc. If we migrate the data related to orders, deliveries, invoices separately, how will we able to link these orders, deliveries and invoices after migration. As we will be giving new number ranges too for them.
Please advice.

Good Morning,
We create a filed in Template and links the column from the drop down List.
http://3.bp.blogspot.com/_KYY-OV98iIo/TDYcUCy2GDI/AAAAAAAAAIA/TNo1Arn9Rls/s1600/verticalLine.bmp
Mark accordingly

Lost book marks after data migration

I lost my bookmarks on safari after a data migration from an older backup. Is there anyway to recover them. The current bookmarks are now from my backup that was 4 months ago and I lost all the recent ones. My 'deleted user' file did not store any applications so I cannot seem to go back and find them.

I lost my bookmarks on safari after a data migration from an older backup. Is there anyway to recover them. The current bookmarks are now from my backup that was 4 months ago and I lost all the recent ones. My 'deleted user' file did not store any applications so I cannot seem to go back and find them.

Problems query data after data migration to Hana

Hi We currently have 2 BW environments: Release: 701 SP-Level: 0014 Support Package: SAPKW70114 DB: No Hana Release: 740 SP-Level: 0005 Support Package: SAPKW74005 DB: Hana It was necessary to migrate data cubes BW 701 -> BW 740, because in ECC only history of the last 18 months is maintained. After this migration, when I make a query in Query Designer and I use between in "Filters and Restrictions" no returned values, but if I include the value and not use the between the values are displayed. For example: I created a query with: one key figure, Comp_Code, Material and Fiscper. On filters and restrictions I informed that should return only the materials between 0001 and 0003. When running the query does not return values, but if I change the filter to only return materials 0001, 0002 and 0003, the query returns data. Note .: This problem occurs only with the migrated data from the BW 701, loads of ECC deltas are functioning normally. Could you help me solve this issue? Best Regards

Important point: I found that if you run the query in RSRT "Execute + Debug" button and do not use the option "Do not use SAP HANA / BWA Index (0)" the query runs without problems.
Additional Information:
- BW on Hana environment 740 is a new installation.
- To load the historical data for the BW on Hana was created an RFC with the BW 701, classic BW as source system to new BW HANA.
- BW 701 was generated Export Data Sources ( From cube to cube, from DSO to DSO) and we used of data sources to migrate historical data.
- Then BW on Hana is a new installation, but only the historical data were extracted from the BW 701 (no Hana)
- Export Data source generated on DSO data is ok, but the Data source of export from a cube, data is not ok. After data load this historical data, when I make a query in Query Designer and I use between in "Filters and Restrictions" no returned values, but if I include the value and not use the between the values are displayed, but the problem occurs only in the query on the Cube.
- Are there any recommended when historical data is extracted on the Cube by Export Data Source?

Coruption after data migration

hello, i have problem with data migration
i migrate data using third party software TDMF/Replicator. not oracle tool ( replicate from current disk to another disk)
the migration is ok, oracle can startup with out recovery, aplication ok. but the problem when we run backup using veritas backup, complaining about data file coruption.
so i want to know is oracle have command to check data file coruption?
best regards
freddy
error from veritas backup
Corrupt block relative dba: 0xbd806c8f (file 758, block 27791)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbd806c8f
last change scn: 0x0003.55107f93 seq: 0x1 flg: 0x02
consistency value in tail: 0xb3110601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=27791, file=/orabig18/GENEVA/cedat2_7.dbf. found same corrupt data
Wed Aug 17 02:23:44 2005
Corrupt block relative dba: 0xbc43f3d3 (file 753, block 259027)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbc43f3d3
last change scn: 0x0002.d5e5888f seq: 0x1 flg: 0x02
consistency value in tail: 0x12960601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=259027, file=/orabig18/GENEVA/cedat2_3.dbf. found same corrupt data
Wed Aug 17 02:37:11 2005
Corrupt block relative dba: 0xbf86d90e (file 766, block 448782)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbf86d90e
last change scn: 0x0002.d74c1d89 seq: 0x1 flg: 0x00
consistency value in tail: 0xf6f40601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=448782, file=/orabig18/GENEVA/cedat2_15.dbf. found same corrupt data
Wed Aug 17 02:40:35 2005
Corrupt block relative dba: 0xbe8c160f (file 762, block 792079)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbe8c160f
last change scn: 0x0002.d3d40159 seq: 0x1 flg: 0x02
consistency value in tail: 0xe9bc0601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=792079, file=/orabig18/GENEVA/cedat2_11.dbf. found same corrupt data
Wed Aug 17 02:56:50 2005
Corrupt block relative dba: 0xbd806c8f (file 758, block 27791)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbd806c8f
last change scn: 0x0003.55107f93 seq: 0x1 flg: 0x02
consistency value in tail: 0xb3110601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=27791, file=/orabig18/GENEVA/cedat2_7.dbf. found same corrupt data
Wed Aug 17 02:23:44 2005
Corrupt block relative dba: 0xbc43f3d3 (file 753, block 259027)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbc43f3d3
last change scn: 0x0002.d5e5888f seq: 0x1 flg: 0x02
consistency value in tail: 0x12960601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=259027, file=/orabig18/GENEVA/cedat2_3.dbf. found same corrupt data
Wed Aug 17 02:37:11 2005
Corrupt block relative dba: 0xbf86d90e (file 766, block 448782)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbf86d90e
last change scn: 0x0002.d74c1d89 seq: 0x1 flg: 0x00
consistency value in tail: 0xf6f40601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=448782, file=/orabig18/GENEVA/cedat2_15.dbf. found same corrupt data
Wed Aug 17 02:40:35 2005
Corrupt block relative dba: 0xbe8c160f (file 762, block 792079)
Fractured block found during backing up datafile
Data in bad block -
type: 6 format: 2 rdba: 0xbe8c160f
last change scn: 0x0002.d3d40159 seq: 0x1 flg: 0x02
consistency value in tail: 0xe9bc0601
check value in block header: 0x0, block checksum disabled
spare1: 0x0, spare2: 0x0, spare3: 0x0
Reread of blocknum=792079, file=/orabig18/GENEVA/cedat2_11.dbf. found same corrupt data
Wed Aug 17 02:56:50 2005

It is an Oracle command line tool that can be found $ORACLE_HOME/bin
I think that you don;t have coruption in your files, if you would have corruption in your datafiles Oracle would detect it when starting. But to be 100 % percent sure, please run dbv
It is hard to say how much time is need for this utility becaue it depends on speed of your disk, size of your datafiles. Please try running it on small datafile, and then you will get an answer for you question
Best Regards
Krystian Zieja / mob

Many problems after data migration

I recently installed an SSD on my Early 2011 MBP. I put my old drive in an enclosure and after installing Mavericks 10.9.4 on the new drive, I used Migration Assistant to copy over all my Users/Applications etc. Many problems ensued. One of the users migrated without any (major) problems. The other user had the following issues:
1) Every time I log in, several programs automatically open (Word, Powerpoint, Messages, Preview, Firefox). Even if I quit them all, log out and/or reset, then log back in, they all open back up again. This didn't happen before. None of these programs are in Users & Groups --> Login Items.
2) iCould, Facetime and Messages all ask my for me AppleID password, every time I log in. Facetime even asks for the password twice (I put it in correctly. If I put it in incorrectly it lets me know). It does this every time I log in.
3) Facetime and iMessage won't connect to the network. However, if I make a new user and sign in to Messages it works, so I know the network is fine.
4) Every time I start Firefox, it opens to the "recovery" page. I can delete the profile information, and it gets rid of this problem, but then I have no history/saved passwords etc. and that defeats the purpose of having my information migrated over.
I've googled the above issues and tried all the solutions I could find but nothing works. I'm fairly computer literate but this is causing me to pull my hair out! Any help would be appreciated. Thanks.

I resolved the problems above by using Linc Davis' post on Nov 23, 2013 11:44 AM on this thread: Could not sign in to iMessage.
Details copied again below
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.

How to open mail on old PPC 10.5.8 after data migration to MBP?

Hi All, I have had a Mac 10.5.8 PPC (Leopard) for years, and recently got a shiny new MBP. After an Apple consultant migrated the data for me from the old to the new, I can no longer open mail on the 10.5.8 I can send email, and receive it, but I cannot open it. I still want to be able to use my old machine. Any suggestions appreciated.Thanks! (Everything on MBP is fine)

Keep all your e-mail on an IMAP account. That way both machines can check into it. MInd you, once you copy it to the local hard drive of the one machine, the other can't read it simultaneously.

After data migration CC Desktop is blank

I've just bought a new iMac and migrated my data from my old macbook. When I run Creative Cloud Desktop it shows a blank box. The gear icon only gives me the options Help, Open as Window or Quit. I've contacted support three times and they've had me run a cleanup tool, delete various files and directories in both /library/Application Support/Adobe and ~/library/Application Support/Adobe. Each time I was disconnected before the issue was resolved, twice while using Online Chat and once by phone. I'm starting to get a complex. Does anyone have any ideas how I can fix this?
Mike

BLANK Cloud Screen http://forums.adobe.com/message/5484303
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

Transaction AS03 after data migration

I have done the migration data of assets with 31.12.2008 like Transfer
Data.But in transaction AS03 I can't see the data that make reference
to year 2008 and I see the data but in the year 2009, this is correct?

Hi,
When you do an upload on the begin of the new year the date is 31-12-2008 in your upload settings but the assets are active from 01-01-2009. (the same is with 31-01-2009 then active from 01-02-2009)
Look to your planned depreciation for the next years if this it is correct, it should be

Gmail not working after data migration

Migrated data from old (2010) macbookpro with maverics to "new" (2011) macbook pro with maverics and now gmail doesn´t work. The inbox is empty. Have tried to rebuild mail and restart computer. Both computers are updated. Gmail worked fine on old macbook pro with maverics. Have done migration from time machine to new computer (with backup from old computer). The "show in IMAP" setting in Gmail account is selected and I have tried to deselect and reselect it agian. Nothing I have tried works.
Any ideas?

I'm not. Have you tried posting in Gmail's forum area - http://www.google.com/support/forum/p/gmail?hl=en&utmsource=HC&utm_medium=leftnav&utmcampaign=gmail ?

How to relate dispute case for a AR document

Hi Gurus,
I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
so my question how to relate relevent dispute case for the AR document?
Thanks advance.
Regards,
Radhakrishna.

Hi.............
Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
Regards,

FSCM-DM: Status of Dispute Case does not change

Hi,
I'm facing a problem where i have a few dispute cases created in my worklist and, some of the invoices that are associated with the dispute case, are already paid.
The dispute case already disapear from "Dispute Case" tab but, when i check it again in the "Contact details" tab i notice that the status is still "In Process".
I customized my system like this:
On status Management,
SPRO=>Financial Supply Chain Management=>Dispute Management=>Dispute Case Processing=>Status Management=>Create Status Profile
Status   Status Discription SystemStatus System status discription
20            In Proces                                 002     In Process
30           Confirmed                                008     Confirmed
40           Closed                                     007     Closed
50           Canceled                                 009     Voided/Deleted/Canceled
And, in Process Integration
SPRO=>Financial Supply Chain Management=>Dispute Management=>Dispute Case Processing=>Process Integration=>Define Automatic Status Changes
Automatic reopen => 20
Automatic Written of =>40
Automatic closed => 40
Also, if i run the automatic written of program, no dispute case is considered.
Test:
I have a test where i created an dispute case and aftwards i paid the invoice.
Result:
The system generated an express mail requesting me to make a subsequent posting so i checked the SBWP transaction and i notice that there was an error and the system indicates to run the program FDM_PROCESS_BUFFER.
So, i run program FDM_PROCESS_BUFFER but i received the message that "Dispute Case 000000000222: Automatic close status 40 is not valid"
Thanks in advance for your inputs,
Edited by: Morbius on Oct 14, 2010 9:11 PM
Edited by: Morbius on Oct 14, 2010 9:56 PM
Edited by: Morbius on Oct 14, 2010 10:41 PM

Solved after updating the status data in customizing (the high and low values).

Error - Dispute Case Data Could Not Be Read

I got above error while creating the dispute case in production server.
Anyone have an idea how I fixed it, does it need to see RFC?
Please guide me
Krunal

Hi Mark,
Thanks, while I create one document for dispute case system is not able to read the document. It is in productive client. we have cluster specific transactions in one cluster we post documents and another cluster dispute cases create. so when I tried to create dispute case in main cluster with ref to document system gives me below error.
Normally we post transctions in G cluster and after posting in G we process dispute case in G cluster and after it open in E cluster for details about dispute case.
Using UDM_DISPUTE transction code for look into dispute cases in E cluster, here we canonot proceed from G to E, In G Cluster we find this error and because of this we unable to create dispute case in E cluster.
If you need more information, Please ask me.

Best practice for data migration install v1.40 - Error 2732 Directory manag

Hi
I'm attempting to install SAP Best Practice for Data migration 1.40 on Win Server 2008 R2 (64 bit).
Prerequisite error
Installation program stops with missing file error
The following file was not found
... \migration\InstallationWizard\BusinessObjects Data Services\setup.exe
The file is necessary for successful installation. Please connect to internet or refer to Quick Guide (available on SAP note 1527151) for information regarding the above file.
Windows installer log displays
Error 2732 Directory Manager not initialized
SAP note 1527151 does not exist or is internal.
Any help appreciated on what is the root cause of the error as the file does not exist in that folder in the installation zip file.
Other prerequisite of .NET 3.5.1 met already.
Patch is released since 20.11.2011 so I presume that it is a good installation set.
Thanks,
Alan

Hi Alan,
There are details on data migration v1.4 installations on SAP website and market place. The below link should guide to the right place. It has a power point presentation and other useful links as well.
http://help.sap.com/saap/sap_bp/DMS_V140/DMS_US/html/index.htm
Arun

FSCM SAP 5.0 Dispute Management-record and case model-dispute cas model.xml

Hello,
I am using the W21: Dipsute Management Building Block Configuration Guide.doc
At the first step, creating a case record model, the configuration guide refers to a file:
6.     In the toolbar of the Modeler in the upper middle section select Model >> Load local file and open the file - dispute case model.xml -.
I do not have this file available, does anyone have any idea how to resolve this?
-     How can I obtain this file
-     Is this file necessary, to create a case record model
Thanks for your help.
Kind regards,
Santiago

Hi Santiago,
This was tricky for me too. Execute tran UDM_DISPUTE. Change your RMS ID (left side, middle box, icon with two overlapping squares) to UDM_DISPUTE. In the same box, expand Record and Case Record Models. Double click on Modeler for Case Records in Dispute Management. This brings up a search box. Click on execute Search. Double click on the Dispute Management entry in the lower box. This gives you the standard model. You can download this, using the Other Model Functions.
Then change to your custom RMS ID (ex. ZUDM_DISPUTE). Expand Record and Case Record Models. Right click on Modeler for Case Records in Dispute Management and select Create. Then upload the standard model into your RMS. Then you can customize the model as you wish. Hope that helps!
Beth

Manage Dispute Case after data migration

Similar Messages

Maybe you are looking for