Manage hyperion services with OEM

is anyone know how to config OEM to monitor Hyperion services?
I knew this a patch for OEM 10 which can maike OEM to monitor hyperion financial management serivce. I want to know how to monitor other hyperion services
thanks

I have the same issue finding documentation.
I'm aiming for GC 11g and the target Hyperion is 11.1.1.3
If i find same, I'll update

Similar Messages

Hyperion integration with OEM

Hi,
Anyone have any idea in integrating Hyperion with OEM...?
I am facing some issue in integrating....
Thanks

Check this out: http://www.oracle.com/technology/products/bi/epm/pdf/sys9_oem_integration.pdf
Regards
Rob
http://oemgc.wordpress.com

Reports in Manager Self Service with java.lang.NullPointerException

Hi Everyone,
I have been breaking my head with this problem for over a week. When initially installed the reports worked fine but now when I try and access the Report Selection I get the following java.lang.NullPointerException error. I am running EP 6.0 SP14 on a ERP2004 backend system. I have compared almost all the values with the default ones and have read all documentation and set up exactly what it needs. In SAPGUI the Manage´'s Desktop shows ok via trans ppmdt, but via my MSS it shows nothing.... Any ideas ?...
SSO works ok, everything like that is already configured since the full MSS works besides the reporting.... I do not have a BW system, I would only want the reports that come from REPO or FUNC. The Report Selection page doesn't even open.
One thing I have noticed, when I change the sap.xss.rpt.scenario=RPT0 on the resource for the report selection service the screen appears showing an empty report selection, but when I enter the rpt0 value it displays that error.....
Any ideas ?? Anyone been throught this ??
Regards,
Paulo Poinha -- Accenture

Hi Paulo,
I had the same problem - it is resolved by SAP note 912976 and has to do with:
Symptom
After applying NW04 SP Stack 14 and ERP 2004 MSS SP10, the MSS Reporting application returns a java.lang.NullPointerException error.

Managing OSB services with source Control

I have a number of services developed within an OSB and all the files .proxy , .biz , etc are stored in my source control system. This works perfectly fine when one team is working on one service.
However now we are looking at branching the service to support multiple development efforts. Which means team A could be making changes to MyService.proxy and team B could be fixing bugs in the same proxy on a different branch.
We want to periodically baseline the branches.
I cannot see any documented approach to how we can merge these changes. Comparing the files as XML is ugly and extremely high risk. Having looked in this forum I have not much discussion on this in the past.
I foresee multiple merge conflicts, overwritten changes and angst ahead.
If anybody has dealt with this and has some clever approaches I would be grateful
-Murph

Hi Prabu,
Thanks that is one approach to minimizing possible conflicts. The difficulty we have is that we are used to multiple teams working on multiple branches and managing merges using SCM tools and diff tools. Once you have a conflict in the OSB (specifically at a proxy level) then there is real problems.
I am toying with the idea of locking mechanisms whcih I have not used in a while to avoid losing work with conflicts.
Cheers
Murph

Managing Audit Vault with OEM - Passwords

How do these products transmit passwords, encryption or clear text? I plan on using Oracle Enterprise Manager to admin the Audit Vault repository. I understand the risks of using SQL*plus to alter user credentials and possible network sniff but if its from Oracle OEM to AV, are there risks?
Edited by: 895890 on Nov 8, 2011 7:59 AM
Edited by: 895890 on Nov 8, 2011 8:01 AM

Hi ,
Please try the following:
Execute the setup in cmd with -ignoreSysPrereqs option.
Thank you.

Developing, Deploying, Managing Web Services with Oracle9i

HOWTO: The "Hello, World!" Sample Project
Follow these steps to create, compile, and run a simple Java program in JDeveloper:
1.Create a project. Choose File | New Empty Project. A new project node, with a name resembling
MyProject1.jpr will appear in the Navigation pane.
2.Create a Java file. Make sure your project node is selected, and choose File | New. The Object Gallery opens.
Select the Objects tab and double-click the Class icon. In the Class Wizard dialog that opens:
1.Replace the default class name with "HelloWorld".
2.Click OK.
A new file node, named HelloWorld.java will appear under your project node.
3.Edit the file. Double-click the file node to open the file. Edit the file, adding this method to the definition of the
HelloWorld class.
public static void main(String[] args) {
System.out.println("Hello, World!");
4.Build the project. Choose Project | MakeProject. A message will appear, reporting success or failure, in the
Status line at the bottom of the JDeveloper window. If there are errors they will be listed in the Message View
pane, under the Compiler tab.
5.Run the project. When the project has been successfully built, Choose Run | Run. Your message will be printed in
the Message View pane, under the HelloWorld tab.
null

That seems to be it. Thanks a lot. I guess it was simply a confusion of terminology. They call the material "Web Services" in the white paper (like the rest of the world), and "Dynamic Services" everywhere else. Thanks again.

Troble configuring Hyperion Shared Services with SQL Server 2005

I recently installed SQL server (SQL SERVER 2005) in my machine and then am trying to install Hyperion (9.3.1) products. I started with Shared services. It was installed successfully. Problem is occuring when am trying to configure Shared service with SQL database using Hyperion Configuration utility (9.3.1)
The error which is popping up is
Unable to connect to the database for the product Hyperion Shared Services.
Things which I tried from my end
1. Made sure TCP IP Protocol was enabled in SQL server configuration server.
2. hypuser was created in SQl server.
3. hypdb was created in SQL server.
4. Was having dynamic IP address so install Loopback adapter to obtain Static IP address and port.
5. Port and IP address was correct.
Let me know where I am going wrong.
Any help will be greatly appreciated.

Finally got it fixed firewall settings needed to be change : This document helped me a lot to troubleshoot the issue
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
This problem may occur when SQL Server 2005 is not configured to accept incoming local and remote connections, which is disabled by default in SQL Server 2005 Express Edition, SQL Server 2005 Developer Edition and also SQL Server 2005 Enterprise Edition. To solve the connection forbidden problem, SQL Server 2005 needs to configure to allow incoming local and remote connections.
Firstly, ensure that SQL Server 2005 is configured properly to allow incoming connections on the instance of database server, else enable and turn on the local and remote connections setting.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine tree, click Remote Connections.
Select Local and remote connections, or Local connections only which applicable only if there is no remote system tries to connect to the SQL Server, useful when you just trying to connect and authenticate with the server after installing.
Select the appropriate protocol to enable to local and/or remote connections environment. To ensure maximum compatibility, select Using both TCP/IP and named pipes.
Click Apply button when done.
Click OK button when prompted with the message saying that “Changes to Connection Settings will not take effect until you restart the Database Engine service.”
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine, then click Service.
Click Stop button to stop the SQL Server service.
Wait until the MSSQLSERVER service stops, and then click Start button to restart the MSSQLSERVER service.
Secondly, SQL Server Browser service has to be enabled to allow for local and remote connections if SQL Server 2005 is running by using an instance name and users are not using a specific TCP/IP port number in the connection string.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, click SQL Server Browser.
Select Automatic as the Startup type to start SQL Server Browser service automatically every time system starts.
Click Apply button.
Click on Start button to start the service immediately.
Click OK button.
Finally, if remote computer needs to connect and access SQL Server, an exceptions in Windows Firewall included in Windows XP SP2 (Service Pack 2), Windows Server 2003 and Windows Vista needs to be created. If you’re using third-party firewall system, the exception rules also needed to be created to allow external remote connections to the SQL Server 2005 and SQL Server Browser Service to communicate through the firewall, else connections will be blocked. Consult the firewall manual for more details. Each instance of SQL Server 2005 must have its own exception, together with an exclusion for SQL Server Browser service.
SQL Server 2005 uses an instance ID as part of the path when you install its program files. To create an exception for each instance of SQL Server, you must identify the correct instance ID. To obtain an instance ID, follow these steps:
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Configuration Manager.
In “SQL Server Configuration Manager”, click the SQL Server Browser service in the right pane, right-click the instance name in the main window, and then click Properties.
On the “SQL Server Browser Properties” page, click the Advanced tab, locate the instance ID in the property list.
Click OK button.
Then create an exception for SQL Server 2005 in Windows Firewall.
Click on Start button, the click on Run and type firewall.cpl, and then click OK. For Windows Vista, type firewall.cpl in Start Search box and press Enter key, then click on Allow a program through Windows Firewall link on left tasks pane.
In “Windows Firewall”, click the Exceptions tab, and then click Add Program.
In the “Add a Program” window, click Browse button.
Click the C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe executable program, click Open button. MSSQL.1 with is a placeholder for the instance ID that is obtained from previous procedure. Note that the path may be different depending on where SQL Server 2005 is installed.
Click OK button.
Repeat steps 1 through 5 for each instance of SQL Server 2005 that needs an exception.
For SQL Server Browser service, locate the C:\Program Files\Microsoft SQL Server\90\Shared\sqlbrowser.exe executable program, and click Open button.
Click OK button.

Hyperion Services Manager

Hi,
I wanted to know if any of you is aware of a utility called Hyperion Services Manager. If I am correct it was developed by the Hyperion Developer Network. Can anyone tell me how I can get this utility?
Shehzad

I made a primitive .net application as well but it was more of a waste of time, since everytime i'd think of a different scenario and then change the code. It wasn't that comprehensive. I think with V11 the service startup sequence shouldn't be a problem (although I haven't worked with V11 so can't be sure about that).
As far as the monetization goes, I'm not sure how viable this application would be, but I'd be glad to collaborate with you and get a product up and running.

Management agents for 10g OEM Grid setup with HP's MC/Serviceguard

I am trying to set up the OEM Management agents in a MCserviceguard environment.
Each db is a serviceguard "package" with its own disks and a floating IP. The floating
IP is constant, but is dynamicly associated with whichever server currently hosts the package.
The goal is to have a Management agent (formerly Intelligent agent) per db.
There are notes and tech forums on how this is achieved in version 9.2 with
Intelligent Agent. However, not having any luck in finding this for 10g.
In 9.2, a forum note
From: John Low 14-Sep-04 21:20
Subject: OEM setup with HPs MC-Serviceguard
Has anyone setup the 10g Management agents to run on an MC Service Guard environment
(or similar cluster environment on another platform)? If you have please let me know!!
David
Message was edited by:
wan00823
Message was edited by:
wan00823

Here is a nice document that should answer your question
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gEMAgentActivePassive.pdf
I did not bother installing three agents. I just installed one at the package level. My hosts are monitored by HP Openview. OEM just monitors the databases.
I have not used the command line parameter in runInstaller to set the hostname. Here is how I did it - may not be supported though. I have learnt the hard way that with HPUX you are on your own for most part with OEM. I modify Disk1/install/oraparam.ini. Change SHOW_HOSTNAME=NEVER_SHOW to SHOW_HOSTNAME=ALWAYS_SHOW. Installer will prompt you for hostname and the network card to use. Choose the one to which the service guard ip is attached to and change the hostname.
Take a look at my previous post regarding installing management service I have the tweaking described in more detail. The tweak is same for both management agent and management service install.
10g Grid Control and MC/Service Guard on HP-UX 11i

Management Agent service not created with 10gR2 RAC DB install on Win2003?

Our 10gR2 RAC installation on Win2003 platform didn't create management agent service. After installing and setting up current release of OEM with Grid Control (10.1) and installing Management Agent from 10.1 OEM distribution (install additional management agents option), agent service is up and running. However, there is one small problem:
All target configuration xml files are created under 10.2 Oracle home, and agent running from 10.1 home does not see them - which means database, listener, etc are not registered in OEM.
Is this a known problem, and is there solution for it?
thanks,
Dejan Bogojevic
ps. message posted on metalink also

GlobalBank.ESB application will be created only when you run DynamicResolution
Setup.
run \Source\Samples\DynamicResolution\Install\Scripts\setup_bin.cmd to install GlobalBank.ESB application
on BizTalk Server.
thanks Rachit.

Do we have any Management Plug-in for Hyperion Services

I would like to know if we have any Plug-ins available for mointoring Hyperion services like HFM, FR, FDM, DRM etc thru OEM.
If any one is useing it please share your experince and point me to any documentation available for it
Regards
Rajeev

I'd add to Joaquin's answer that the standard table for cities is ADRCITY table (not ADRC). And if you have maintained SAP Regional Structure then there will be standard search help available for the street field.
And you can read more about [SAP Regional Structure here|http://help.sap.com/saphelp_crm700_ehp01/helpdata/EN/e0/597b52e88b11d4b35d0050dadef62b/frameset.htm].

Error communicating with the Cluster Manage Web Service

Hi,
i connected oracle database with the Endeca Studio but while uploading Departments dataset i m getting this error
"Error communicating with the Cluster Manage Web Service" so plz can anyone explain me wat is this error about.
thanks in advance

I actually ran into this myself- as Pat notes, it's hard to say without seeing log files, but I think that perhaps the default domain profile that the Endeca Server uses for domains created using Provisioning services has not been created. First see what domain profiles exist. Navigate to wherever endeca-cmd lives (e.g., user_projects/domains/endeca_server_domain/EndecaServer/bin), and use the list-dd-profile command:
-bash-3.2$ ./endeca-cmd.sh list-dd-profiles
The profiles that exist will be returned in your terminal window:
prov_dd_profile
default
If you only see 'default', then you will need to create 'prov_dd_profile'
./endeca-cmd.sh put-dd-profile prov_dd_profile
Then try uploading your file again in Studio.
Cheers,
Andrew

[Oracle Web Service Manager] Issues working with gateway

Hello,
Whenever we create a gateway which have a component id other then "C0003001" then we have to create its entry in "gateway-config-installer" and restart soa suite, Why its like that? Ofcourse we can not restart the soa suite on production.
Moreover, we created a second gateway, it was assinged with id "C0003003" (first one was having if "C0003002") , also we created its entry in "gateway-config-installer" and restarted soa suite, then it was observed that services with gateway C0003003 are working but services with gateway idC0003002 have stopped working. Does this means that only one gateway can be active at a given time?
Also on some developer machines, service urls provided by the gateway are not working (Page not found error occurs). What can be the possible reasons?

Hai munir,
I have some doubt on registering with the gateway and an registering the webservice. I think you have done the same.
I specify my hostname and ports. I am working on Oracle SOA 10.1.3.3.0.
Hostname: http://DWH-34316-K2.wipro.com or (10.118.70.181) Port: 7777
Component Name: - user defined gateway name or what?
Component type : - gateway
Component URL : I have doubt on giving this In my case If I give like this is it correct. http://DWH-34316-K2.wipro.com:7777/gateway
After this we will be registering a webservice.
In that it will be asking the following details.
service name : CallHelloWorld (In my case)
service version: 1.0
service description : user defined.
WSDL URL : --> Here how we must want to give. I have given the wsdl taken from the Enterprise manager console. I have taken it while we test the web service we will find the service decription and I clicked it and taken that it is working one.
http://dwh-34316-k2.wipro.com:7777/orabpel/default/CallHelloWorld/1.0?WSDL
After I all this and click Next and It will go to the Http messenger page and in this page in URL column the same WSDL url given is auto populated and save and commit this.
When I go to test page and paste the URL got from the Service WSDL Url and give submit query it is displaying the following error message.
Failed to read WSDL from http://dwh-34316-k2.wipro.com:7777/gateway/services/SID0003017?wsdl:WSDL not found
Please specify any other changes do I need make some changes in the server otherthan changing the Id in the gateway-config-installer.properties
Can you help on this please. It is somewhat urgent.
Regards,
Mahes.

How to Upgrade Service Manager 2012 SP1 with Windows 2008 R2 to SCSM 2012 R2 with Windows 2012 R2

Hi,
We are using Service Manager 2012 SP1 UR2 with Windows 2008 R2.
I am planning to upgrade Service Manager to R2 with Windows 2012 R2. I found the steps to upgrade SCSM 2012 Sp1 to R2 but need assistance to upgrade with 2012 R2 OS.
Please suggest how to achieve the above mentioned objective.
Regards, Syed Fahad Ali

Virtualization solves this problem handily, by allowing you to create a new server to run the new program on the same hardware. it also solves the related problem of moving off unsupported hardware without changing OS or application. VMware is my personal
favorite, but Hyper-V, Xen, and VirtualBox all have similar capabilities.
Compare the cost of work and confidence in success of a upgrade, where any of thousands or millions of uncontrolled settings could cause an issue, to the cost of work and confidence in success of installing a new OS instance and configuring a known state
for the new environment.
In short, upgrades should no longer be a thing. there are just too many ways they can go wrong, and it's far too easy to create a new OS with minimal expense and effort.

OpsMgr Management Configuration Service failed to execute 'DeltaSynchronization' engine work item due to the following exception with event id 29181

Hi , sometimes this error shows in event viewer:
OpsMgr Management Configuration Service failed to execute 'DeltaSynchronization' engine work item due to the following exception
Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.ConfigManager.ConfigurationChangeException: Configuration change occurred during delta synchronization. Delta will be restarted
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.WriteConfigurationDelta(IConfigurationDeltaDataSet dataSet)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.DeltaSynchronizationWorkItem.TransferData(String watermark)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.DeltaSynchronizationWorkItem.ExecuteSharedWorkItem()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.SharedWorkItem.ExecuteWorkItem()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.ConfigServiceEngineWorkItem.Execute()
thanks

For this issue, You can refer below link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=se&lc=sv&dlc=sv&tmp_geoLoc=true&docname=c03699441
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Manage hyperion services with OEM

Similar Messages

Maybe you are looking for