Manage more than 20 Airport Extreme, model A1354 in same broadcast domain

Problem: manage more than 20 Airport Extreme, model A1354 in the same broadcast domain), firmware 7.5.1
We have more than 20 Airport Extreme (A1354) in the same broadcast domain with firmware 7.5.1, now we can not manage them anymore (with airport Utilty)
(Reading the Airport Extreme configuration...) An error occured while reading the configuration. (-6753). When moving one airport to another VLAN, there is no problem anymore. (only if we put more than 20 basestations in the same VLAN)
With the old type basestations (firmware 5.7) there is no such problem! But we need the new one, can you confirm this problem and will there be a solution ?
Client OS: 10.6.3 (Build 10D578)
Airport Utility: 5.5.1 (551.19)
Airport Extreme Base Station, Model Number: A1354, Firmware 7.5.1
LAN: Private Lan /23 network
Al clients have a dynamic IP adres, the Airport have a static IP adres (true ISC dhcp @3.1.2_0 server), we use bridge mode.
We use SNMP, to monitor the airports (Nagios and MRTG)
With Regards,
John

Welcome to the Apple discussion area!
Your post appears to have specific questions directed to Apple. This is a user to user forum and there is no assurance that Apple will see your post. Even if they might, they do not respond on this forum
Your best bet would be to contact Apple directly on your issue.

Similar Messages

Manage more than one news module in the same website

Hi, I am wondering if it is possible to manage more than one News module in the same website and have them all display different content.
Like a news module in the News section displaying announcements and a press section module displaying press related news f. e.

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

Applying SSO for more than one Weblogic Servers on the same Windows domain

I've more than one Weblogic servers (developers machines, test servers, test clusters, clusters and etc.) on my windows domain.
I'm going to configure SSO to all of them. However I want to ask something about SPNs.
For standalone machines (Which are not clustered, developer machines & test machine) :
Do I have to create a new Active Directory user like "wlskerberos" for each machine on my domain?
For cluster machines
Do I have to create more than one Active Directory user account for each cluster member like "wlskerberos"?
For clusters, users don't see the managed servers' HTTP address which are behind the Oracle HTTP Server.
Therefore am I going to add only one SPN and map it to the Oracle HTTP Server adress?
Lastly for the keytab files, does it enogh to create only one keytab for all machines?

Do I have to create a new Active Directory user like "wlskerberos" for each machine on my domain?
yes, and u register the spn with that user
For the other question, refer to this link
http://weblogic-wonders.com/weblogic/2010/03/05/kerberos-in-a-proxyload-balancer-weblogic-cluster/
Hope this answers!

How to implement more than one physical models from the same model

Hello,
We have designed a relational model for our application and now, we would like to implement it for our 4 environments: Development, Test, User-Test and Real. Each one has the same logical schema but, different physical clauses (i.e.: in development environment we will not use partitioning clauses).
Is this possible?
Thank you,
Bernat Fabregat

Hello Bernat,
yes it's possible:
1) open your design and go to Tools>"RDBMS site administration"
2) add your sites there (Current design) - Development, Test, User-Test and Real; press ok when finish
3) go to "Physical models" node in browser and use "new" from pop-up menu - your sites will appear in list
4) after you set physical objects in one model (need to save it as well)l, you can clone those objects in other models - you can clone from lower or the same database version
You can consider usage of "name substitution" functionality during DDL generation if objects should have different name (prefix) in different environment - in this there will be no need to change the name of objects in models.
Philip

How do I reset Airport Extreme Model A1034?

How do I reset Airport Extreme Model A1034?
I am using a MacBook Pro to set up the airport, but, I get this message:
"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."

You would download and install AirPort Utility on the PC.
For Windows 7 and above.....use AirPort Utility 5.6.1 for Windows - Support - Apple
For XP SP3 and Vista SP2......use AirPort Utility 5.5.3 for Windows - Support - Apple
For XP SP2 and Vista SP1......use AirPort Utility 5.4.2 for Windows - Support - Apple

Time Capsule better than Airport Extreme in wifi capabilities??

Hello people,
I recently talked to a friend of mine (Mac user) who told me that Time Capsule has in fact a better WiFi capability than Airport Extreme since it has to cope with all the traffic for Time Machine. I dunno if this rumor is right but if it is i'd like to know more since i'm looking for a WiFi router and if Time Capsule gives better signal strength and thus larger or better bandwidth than i might just go with it.
So what do you people think?
Thanks
Andrei D.

So you are sure then that there are no hidden functions or hardware capabilities that would allow Time Capsule to have better wireless capabilities?
Yes.

Can I manage more than one iTouch from one PC?

A family member has an iTouch managed with iTunes on PC. Another family member would like an iTouch but does not have a computer.
Can one manage more than one iTouch from one PC? How? Does one install separate instances of iTunes somehow on the PC for each device?
There is also the desire to have separate Apple Store accounts for each device. We don't what synced devices.

*How to use multiple iPods with one computer*
The Apple support document How to use multiple iPods with one computer suggests a number of ways. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iPods using this system, each getting a different selection to suit their tastes and the capacity of their iPod. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

Should/can I still use an older airport extreme model M9397LL/A? Why buy a newer one?

Someone gave me an Airport Extreme model M9397LL/A. My daughter just moved out of our house and I was going to set it up at her new place. Would I be better off buying a newer model.

This particular AirPort Extreme can only support 802.11b/g networking, and is getting a bit "long on the tooth." I would recommend getting her the latest 5th Gen model if you really care about her.
If she only needs wireless, then the 802.11n AirPort Express Base Station (AXn) would be a less expensive option.

I need the the latest firmware for Airport Extreme Model A1034 (M8799LL/A)

Hello everybody:
I want to flash my Airport Extreme Model A1034(M8799LL/A)with the latest firmware available..
My Airport have a internal modem , 1 Wan , 1 Ethernet & 1 USB ports
I checked some firmware updates, but I am not sure what is the correct update ..
I don't want to ruin my Airport for flashing the Airport with the wrong update ..
I only have Windows Xp computers ,, I need a Mac to do it ?
Please somebody help me to find the update ,,
Thanks in advance ,,

Do you know if this is still the case? (Version 5.7 is still the latest available for the 802.11g version of the AirPort Extreme Base Station).
I'm a little confused after the release of AirPort Base Station Update 2007-002 for Windows:
http://www.apple.com/support/downloads/airportbasestationupdate2007002forwindows .html
It clearly states that "AirPort Utility v5.2.1 software supports the AirPort Extreme Base Station with 802.11n, AirPort Extreme Base Station and AirPort Express Base Station." But then if you read the System Requirements it says that you need:
* Windows XP with Service Pack 2
* Windows Vista
* AirPort Utility 5.0 or later
* AirPort Extreme Base Station with *802.11n*
So what is the latest version for the 802.11g version of the AirPort Extreme Base Station?
Thanks

How can I get a E3000 or E4200 to manage more than 5 devices

How can I get a E3000 or E4200 to manage more than 5 devices? Come on Cisco, lets get real. EVERYONE has more than 5 devices to manage. The average family of 4 has 3 or 4 computers, 4 smart phones and at least a couple of tablets and maybe some TV or game consoles. Setting access control policies is a must for anyone who is a parent.
Does anyone know of a good router that has a reasonable set of access control features? I've always loved Cisco up to this point, but I'm frustrated by this significant limitation.

Fuggedaboutit. Cisco apparently has retreated from the more advanced Internet Access Policy (IAP) to leave users with their paltry Parental Controls (PC) instead. For example the E4200v1 had IAP+PC, and the E4200v2 has only PC.
And good luck trying to find a E4200v1. I spent the last week, ordered 3 of them from different sources, and every one of them was a V2 inside of a V1 box, even the last one I ordered directly from Linksys!
That's a very bizarre marketing scam they're pulling there. The sad thing is that I actually want to keep using their product line, but they are doing their best to push me away.
I too am now regrouping and looking for a competitor who does 2 things well:
(A) High performing dual-band wireless access point, w/ pswd-protected guest-mode
(B) Reliable & fairly full-featured Internet access control (parental control)
My basic requirements for "B" are:
(1) Allow restrictions by IP or better yet MAC address (Cisco PC's hostname list didn't work for me)
(2) Device list of at least 12 devices (obviously family size varies but Cisco's 5 is a joke)
(3) Restricty by days of week and time of day (hourly or half-hourly would be nice)
(4) Restrict by URL's and keywords, at least 12 per device or policy/rule
I wonder if there's a home router whose stock OS, meets these requirements. Otherwise I may have to look into using DD-WRT or similar.

Will I be able to use my Airport Extreme model A1143 with Xfinity's ARRIS model TG862G/CT wireless modem? If so, how? I want to keep my airport network setting if possible.

Comcast has been hounding me to upgrade to their newer modem in order to obtain maximum bandwidth with changes they've made. They sent me an ARRIS Wi-Fi modem (model TG862G/CT). I was not expecting the modem to have wireless and would prefer using my Airport Extreme (model A1143). I have not attempted to connect the new ARRIS yet. Should I send the ARRIS back or is there an easy way to make use of it while keeping my Airport Extreme fully functional?

Thanks, I will look up "bridge mode" after I log off here. In the mean time, what if I were to simply buy the newest AE—will I still be able to use "bridge mode"? I imagine Comcast would prefer that I use their equipment and will eventually leave me no choice, but until that happens I would prefer to use Apple's AE. What is your expert take on this?
Any AE will be able to do bridge. There is actually very little difference between your ancient AE and the latest AE in terms of functionality.. Apple is minimalist.. so change can be avoided.. no need to add functions that were always missing.
I was thinking the printers are USB?? Is that incorrect.. are they wireless or ethernet? Any native network printer can be simply connected to any router.. it will perhaps be slightly easier in an Apple environment to use them on an apple router but the difference should not be huge..
USB on the other hand is tricky.. you will need to use some router that allows print serving from USB.. that still works fine whether the AE is bridged or in router mode.
Netflix is no problem either.. (assuming you are not trying to bust a geo-block).. the actual netflix login is stored in the TV.. the only security info on the AE is the wireless connection and that can be swapped to any wireless router. No biggie.. geoblocking is a biggie.. tell me if that is the case.
It is really up to you.
1. Do nothing.. let Comcast squark all they like.. they are still providing you a service you can use. They are not going to cut you off if you still keep paying the bills.
2. Change the modem for the new one they sent.. this involves a lot of network modification .. but in view of the age of the current devices.. will have to happen in the near future regardless.
3. Return the modem router and request a pure modem.. to give you as little network impact as possible. You will simply change old modem for new one. However at some point the Gen1 or 2 AE will die.. and the rest of the network will need updating.. you are putting off d-day. Modern wireless routers have come a long way since Gen1 or 2 AE.
Take your pick.. Bob says 3. I say 2 or 3. It makes little difference as at some point the network needs a refresh.

How to manage more than one manager

Hi!
I would like to manage more than one manager for every user (organization).
Can I write more value to manager attribute?
I use Oracle IDM 11gR2.
Thanks in advance,
Attila

In this case, you might need to create a manager structure based on Roles and create a role for each identified manager and put in it those users whom they manage. OIM only allows for a single manager per user on the user form. There is no default functioanlity to allow for this type of manager structure though, so if you see any checkboxes that limit based on manager, it will not work for this. Also any email notifications that are configured to go to the manager will also not work. You would have to use the APIs to see what role the current user is a member of, and then maybe you can add a custom field to your roles to limit what is returned like "Is Manager Role" and if true, return only those.
Just a few ideas to get you headed in the right direction.
-Kevin

Need Airport Extreme Model: A1034 Manual (or IP address) for security

I have an older Airport Extreme Model: A1034 that I'd like to add an access security code to. I don't have the manual any longer and am wondering if anyone knows the URL address and password I'd need to get into an admin level view in order to set the Wireless security.

Hello september132003. Welcome to the Apple Discussions!
The default LAN-side IP address of the AirPort Extreme Base Station (AEBS) is: 10.0.1.1. The default base station administrator password is: public.
However, you will need to use the AirPort Utility to administer the AEBS. Unlike other vendor products, the AEBS does not use a web-based type utility for administration.
Although the AirPort Utility should be installed with your OS X Leopard, you can get a copy of it from here: AirPort Utility 5.3.2 for Leopard
You can get a copy of the AEBS Setup Guide from here: AirPort Extreme Base Station Setup Guide

Using more than one Business area in the same report

Hi,
Is it possible / recommended to use more than one business area in the same report.
For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
Thanks

Hello
Possible: yes
Recommended: no
This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
My recommendation would be to have a workbook per business area and not mix.
If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
Hope this helps
Michael

My sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same computer so my stuff with save?

my sister has a mac and i want to update my phone onto the computer but i dont want her to see all my stuff can you somehow have more than one itunes account on the same macbook so my stuff with save?

How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

Manage more than 20 Airport Extreme, model A1354 in same broadcast domain

Similar Messages

Maybe you are looking for