Manage Profile Services - Unable to edit User Properties or User Profiles

SharePoint 2013 - fresh site, with Mysites, and the User Profile Service running.  The UPS is ran under a separate account, and the farm account has securityAdmin rights and directory replication rights.
When I enter Manage User Properties, I get a complete list of properties but no way to edit them, the same happens when I go into User Profile Properties, there is no where to edit the users.  Has anyone seen this before and if so what step have I missed
in setting the UPS and MySites Up.
Both Administrator and Farm Admin have Administrator rights to the UPS Application, and it's the Profile User Service that's running at the minute not the Profile User Synchronization Service.
Any help would be appreciated.
Thanks
David

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties.  I can see them but not edit them. 
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

Similar Messages

  • Unable to edit users in UPA SharePoint 2013.

    Hi,
    I have created UPA service application just now, I am able to see 30 users in the site. Am able to search for the users but am unable to edit the users from the search result. Am not getting popup to edit profile after right clicking. I have provided permissions
    to below accounts On UPA Databases. I have added the users under permissions option, administrators option in ribbon and provided full rights.
    AppPool account user
    farm admin
    my admin account
    Anyone have idea on what kind specific permissions I need to provide to get edit profile option.
    Thanks,
    Prashanth J

    Is IE running in compatibility mode, and if you're accessing CA from the SharePoint server, did you run it "As Administrator"?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Unable to edit user information from User Admin applet

    Hi
    I'm unable to  update user  information from user admin applet. After selecting a particular user, i'm updating his full name and trying to save the details. When i click on save i'm getting below error
    "Unable to execute service EDIT_USER and function addUserAttributes",(System Error: Unable to execute query 'uUsersClassifiedMarkings(UPDATE Users SET uClassifiedMarkings='No Markings'WHERE(uClassifiedMarkings is  null OR uClassifiedMarkings="))'.ORA-00904:"UCLASSIFIEDMARKINGS":invalid Identifier java.sql.SQLSyntaxException: ORA-00904:"UCLASSIFIEDMARKINGS": invalid identifier)
    Kindly let know what is issue or how to resolve this error

    Ok,lets give it a shot. Can you please check if you have any Security Classifications added by navigating to Records->Configure->Security->Security Classification
    If you do not see any entries here, then use the Add button to add the following
    - No Markings
    - Secret
    - Top Secret
    - Confidential
    Now try to update the user info using the admin applet. In the edit window assign Security Classification to "No Markings" and try submitting the update. Let us know what is the outcome.
    I completely agree with William on his analysis. Please try these steps if you are working on a Dev/POC instance.
    Regards,
    - Anand

  • Unable to Edit Template Properties

    I have created an optional editable area in a DW template for
    a submenu. It functions properly in DW when I create a new page and
    go to Modify>Template Properties.
    However in Contribute 4 (on a page created from this
    template) when I go to Format>Template properties, I receive a
    popup message that says "Unable to set Template Properties" ......
    despite the fact that at the top of the page (in Edit mode), there
    is a message that says "Some items on this page can only be edited
    by setting Template Properties.
    Here is a link to one of the pages
    http://www.blackbusinesspro.com/events.html
    Can someone tell me why the template properties have become
    uneditable in Contribute 4 but are editable in DW?

    Well, I just got Template Properties working .... not sure
    how I did it.
    The only change I made was to upload the templates associated
    with the pages on this site (somehow I had neglected to do so).
    Once the templates were uploaded, "Template Properties"
    startedshowing up.
    Go figure....!

  • Oracle 10g Enterprise Manager web service unable to start

    I am unable to get Enterprise Manager web service for Oracle 10g to start in Windows. Anybody can tell me where to find out what is the problem and what are the possible problems and solutions? I do not wish to re-install or create a new database instance because there is existing data and will require extensive configurations to my web and app servers if I change the database instance. Thanks!

    Hi.
    What does the log say?
    From %ORACLE_HOME%\opmn\logs folder.
    rgds
    Kjell

  • Unable to edit User Status in Service Order

    Hi Experts,
    There are several service orders with user status 'Open', whereas the system status is 'In Process'. The individual items are either set to Completed or are Released. I am unable to change the user status from 'Open', as there are no other options available in the dropdown list in edit mode. I even tried changing the status in CRMD_ORDER and was not able to do it. I checked the configuration for this and its perfectly fine. The status profile has been maintained properly.
       I tried using FM CRM_STATUS_CHANGE_EXTERN and CRM_STATUS_CHANGE_EXTERN_OW for this purpose and it still did not work. Any help/tips to resolve this will be highly appreciated.
    Thank you,
    Nanda

    Hi Nanda,
    As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
    Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
    Hope this helps.
    Thanks,
    Samantak.

  • Unable to edit user properties in SBS Console (2011)

    Hello,
    When attempting to edit properties for a user in the SBS Console, I receive the following error: "Attempted to perform an unauthorized operation."  This only occurs when attempting to edit the user account properties for this single user.
    I understand that this may be a scurity permission problem in Active Directory Users and Computers, but I do not know which permission entries would cause this.  Is this where I need to look or is there another way to resolve this?
    Thanks in advance.
    Jeff

    [13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
    [13284] 120106.095830.3107: Storage: Initialize the quota manager.
    [13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
    [13284] 120106.095830.4667: Exception:
    An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
    Timestamp: 01/06/2012 09:58:30
    Message: Attempted to perform an unauthorized operation.
    This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
    permissions on this folder.
    Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

  • Unable to edit slide properties - Edit is dimmed

    Can anybody clue me in to why my Edit button would be dimmed? None of the slides are locked.  By clicking on 'Select All', the Edit button activates, but of course then I can only edit all slides -
    Can someone tell me how to remove media from a slide if I can't get to the Properties of the slide??
    This is driving me nuts - why can't I edit properties of slides?
    Attached a screenshot.
    Thanks for the vent

    Poregon,
    That's okay...venting is good.
    After looking at your screen shot, I'm wondering how you ended up w/ the Edit button at all.  By default, the Slide Manager dialog box should have only showed the "Select All" button...and then, and ONLY then, the Edit button would have appeared.  And for what its worth, the default functionality of the Slide Manager is to provide slide-by-slide adjustment to it's properties such as setting the slide title, advancing by user and locking a slide, just to name a few.
    The Edit button (once you've selected more than one slide) will only allow you to modify the presenter's info, lock slide and advance by user options, so it's pretty restricted in terms of the parameters you can set over multiple slides.
    And unless I'm completely wrong, as far as "removing media from a slide" is concerned, that's not something the Slide Manager is capable of doing.
    What you're seeing in the listing of multimedia assets in the Slide Manager dialog box is simply a visual feedback element; meaning, that the Slide Manager is just visually identifying the kinds of things that your slides are using....like audio, animation and flash files.  But if you want to manage those assets, you need to look in the appropriate places...like the Edit Audio or Edit Flash dialog boxes.  In order to eliminate a flash file, all you have to do is go to the slide where the flash file exists and simply delete it from the slide.  Same thing goes for animations; and since those are PowerPoint items, that's a simple matter of eliminating any custom animation applied to objects and elements on your slide(s).  As for deleting audio, that's slightly tricker, because you have to use the Edit Audio dialog box....and from there you can cut audio or replace an audio segment with silence.  In a worst-case scenario, you might find yourself having to delete the slide that contains audio you want to eliminate...only to recreate that same slide, so that you end up with a slide that doesn't contain any audio at all.
    Hope that helps!
    Rob
    http://www.robrode.com/yabb/

  • Unable to edit file properties in Search results

    When I access a folder normally, I'm able to update a file properties but if try the same from the search results the dialog is read-only.  I also can't open the properties dialog from Windows Photo Viewer, if the picture was opened from the search
    results.
    An example of the issue is if I search for pictures with a rating i.e.
    type:jpg rating:1
    I can't change the rating of an incorrectly marked jpg without going to it's folder and right clicking on the file directly.
    I've tried rebuilding the search index but this hasn't fixed the issue.
    Is anyone else having these issues?
    Martin Cairns Microsoft Certified Master: SQL Server 2008

    media files have more sophisticated properties like song name, movie title etc.
    windows is able to search some fields but not all of them
    if you need that level of sophisticated file management, you may be stuck to develop one to your needs
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • Unable to Edit User

    Hi,
    I didn't have any problem creating new users in Portal using the Portal30 administrator id. But I when try to Edit the existing users by selecting a User from the list and clicking on the Edit button, all I get is the HTTP 404 Not Found with the URL of:
    http://xxx/pls/portal30/PORTAL30.wwptl_ls_admin.find
    Via PORTAL30 schema, I verified that pacakge wwptl_ls_admin is valid and has the FIND as an external procedure.
    Does anyone know what the problem might be? Thanks. Binh.

    [13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
    [13284] 120106.095830.3107: Storage: Initialize the quota manager.
    [13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
    [13284] 120106.095830.4667: Exception:
    An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
    Timestamp: 01/06/2012 09:58:30
    Message: Attempted to perform an unauthorized operation.
    This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
    permissions on this folder.
    Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

  • Unable to Edit Title Properties

    I've never ran into this issue before, but I'm in the title designer in Premiere Pro CS6 and cannot make any changes to the font color/shadow/anything. I'm sure there's a simple fix but it's really stressing me out trying to figure it out.

    Hi,
    Please check this blog regarding CC application and OS X Yosemite.
    http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
    You can also, try the step mention below and check if it helps.
    Go to Documents\Adobe\Premiere Pro\8.0\Profile-CreativeCloud-\Styles and remove the workingset.prsl from there and move it to desktop. Make sure Premiere Pro is closed.
    Regards,
    Vinay

  • Unable to start User Profile Sync Service

    Hi,
    I am currently facing some issues with starting the User Profile Sync Service on my SP2013 farm.. I was wondering if someone could help me out a bit.
    I have successfully installed the SP2013 farm on a environment that has access to our AD etc. and I have also
    restored the database from SP2007 and converted it to Claims authentication etc. The one thing I can’t get to work is to enable the User Profile Sync Service on the server. I have checked quite a bit of TechNet blogs and other sites and tried almost everything
    suggested but it still fails. I’ve also recreated the farm from scratch yesterday again but no luck still
    L.
    The below is what I have done:
    Farm Admin account – spadmin2013 is local admin on all SP Farm servers (2 WFE and 2 APP Servers) and has log on locally rights as well on security policy. On the SQL DB it has dbo permissions on the Sync, Profile and Social DB’s.
    Farm Service account – spservice-s is a managed farm account that is used to run the various services of the farm (used during the config wizard part).
    From within the Admin Control Panel I have verified the managed accounts and it is indeed spadmin2013 which owns the User Profile Sync Service (not the application itself). When I try to start the service it tries to do that for 5-10 minutes and then fails
    and goes back to stop and I do not see any error. I have created a custom service application with new database that runs on spadmin2013/spfarm/ldap accounts etc. I can see from the Windows services – FIM and FIMSync service try to start using the spadmin2013
    and then go back to disabled. I have also tried giving the spadmin2013 rights to replicate the AD as few blogs suggested that. I am not sure where this is going wrong or what is missing. I had successfully got this to work and still can get it to work on my
    first SP2013 server which is a standalone – running SQL, SP app and WFE on the same box.
    In fact I also tried to activate this service first before I joined my 3 other servers to the farm and had no luck. I am kinda lost here as to what is going on! 

    Right. i ran a new log as suggested. I have also cleared the config cache and created a Powershell profile as suggested in this link - http://blogs.msdn.com/b/bryanbolling/archive/2014/01/02/unable-to-start-user-profile-synchronization-service.aspx
    I checked the ULS Logs and i can see the below error -
    ILM Configuration: Validating account.
    ILM Configuration: Validating the system groups
    ILM Configuration: Setting up WMI
    ILM Configuration: Setting required permissions
    ILM Configuration: Create install config file
    ILM Configuration: Update source project
    ILM Configuration: Changing service account credentials
    ILM Configuration: Setting policy for service account
    Updating SPPersistedObject UserProfileApplication Name=User Profile Sync Service. Version: 63903 Ensure: False, HashCode: 55647834, Id: ef1ec55c-aa15-4cb7-a9fe-498382a88b4e, Stack:
    at Microsoft.Office.Server.Administration.UserProfileApplication.Update()
    at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance)
    at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
    at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
    at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
    SQL connection time: 131.92704 for Data Source=SPSQLAGL;Initial Catalog="Sync DB";Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name="SharePoint[OWSTIMER][1][Sync DB]"
    ILM Configuration: Configuring database
    ILM Configuration: Error 'ERR_CONFIG_DB'
    UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next rerun. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
    at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ValidateConfigurationResult(UInt32 result)
    at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ConfigureMiisStage2()
    at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance).
    UserProfileApplication.SynchronizeMIIS: End setup for 'User Profile Sync Service'.
    Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63899 Ensure: False, HashCode: 36296732, Id: 7aeb377f-8bd1-453d-b6be-6a373eaf350d, Stack:
    at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
    at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
    at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
    at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
    Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Execution Time=6041.65717333333
    Name=Timer Job User Profile Sync Service_ProfileSynchronizationJob
    Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: -1 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
    at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
    at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
    at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
    at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
    at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
    at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
    at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
    Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63913 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
    at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
    at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
    at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
    at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
    at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
    at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
    at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
    I have verified the spadmin2013 does have dbo permissions and also is part of security & sysadmin in sql server. I run SQL 2012 with SP1

  • User Profile Application and Managed Metadata services are missing

    Running SharePoint 2013 servers on a set of 2012 R2 Servers.  One of our farm administrators deleted the Secure Store service account.  They recreated the Secure Store account, but after doing so, the Managed Metadata Service and User Profile Service
    are now unavailable.
    When going to the User Profile Page, there is an error that says "Sorry, something went wrong."
    When going to the Metadata page, there is an error that says "The Managed Metadata Service or Connection is currently not available."
    There is an additional error that says "The Security Token Service is not available."
    How can all three services be brought back online?

    That specific event log error is as follows:
    WebHost failed to process a request.
    Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/12547953
    Exception: System.ServiceModel.ServiceActivationException: The service '/SecurityTokenServiceApplication/securitytoken.svc' cannot be activated due to an exception during compilation.  The exception message is: Exception has been thrown by the target
    of an invocation.. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: Value cannot be null.
    Parameter name: certificate
       at System.IdentityModel.Tokens.X509SecurityToken..ctor(X509Certificate2 certificate, String id, Boolean clone, Boolean disposable)
       at System.IdentityModel.Tokens.X509SecurityToken..ctor(X509Certificate2 certificate)
       at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceManager.ConfigureTokenHandlerCollection(SPSecurityTokenServiceManager manager, SecurityTokenHandlerCollectionManager collectionManager, String key, SecurityTokenHandlerCollection&
    tokenHandlerCollection)
       at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceConfiguration.ConfigureTokenHandlerCollectionForLocalIssuer(SPSecurityTokenServiceManager manager, SecurityTokenHandlerCollectionManager collectionManager, String key)
       at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceConfiguration..ctor()
       --- End of inner exception stack trace ---
       at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
       at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
       at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark)
       at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
       at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture)
       at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceHostFactory.CreateSecurityTokenServiceConfiguration(String constructorString)
       at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
       at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity)
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
       --- End of inner exception stack trace ---
       at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
       at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
    Process Name: w3wp
    Process ID: 5504

  • Edit User profile Property - grayed out buttons

    I am trying to change the mapping for the Work email property in the User Profile but when I edit the property on the "Edit User Profile Property" page, the Property Mapping for Synchronization's "Remove" button is grayed out as well
    as Add New mappings "Add" button. I am logged on with the Farm account which has admin rights to  the UP.
    ITGirl

    Hi ,
    For the Add New Mapping's "Add" button grayed out, when I change to another/second "Synchronization Connection" from "Source Data Connection" dropdown, then "Add" button will be available.
    For the Property Mapping for Synchronization's "Remove" button grayed out,
    please make sure your Farm account or user account has the following permissions, then check results again.
    http://technet.microsoft.com/en-us/library/ee721049(v=office.15).aspx#MapUserProc
    The user account that performs this procedure is a farm administrator or an administrator of the User Profile service application.
    The user account that performs this procedure is a member of the Administrators group on the computer that is running SharePoint Server.
    Thanks
    Daniel Yang
    TechNet Community Support

  • Why do users get "unable to set template properties" message?

    Hi there,
    I am trying to administer a new site that was created with DW and has a .dwt (Templates/ locatedat the site root). I'm creating "Publisher" role connection keys so users can edit their subsections of the site. Users should be able to modify template properties when they edit/create new pages.
    While testing the keys, the users report that they can connect and edit pages. However, when they try to modify template properties on either a new or existing page, they get this message "Unable to set template properties" and are prevented.
    I've tried redefining the site and starting all over, tried CS3 vs. CS4 to see if it was a compatibility issue, looked at forum after forum but can't find any answers. I am experienced with DW but new to Contribute administration so I don't know what else to try. Hoping that someone will have encountered this before and can suggest a solution.
    Thanks in advance!
    ps- Let me know if there's other info I can provide to help troubleshoot.

    I did find this April 9, 2009 post from majtom2grndctrl that suggests the issue is how contribute treats https:// sites. My site is set up as majtom2grndctrl described and I am having the same problem.
    "I've got a problem with not being able to edit Template Properties on our test sites we host on HTTPS servers. I've narrowed down the problem to Contribute CS4 ignoring the website root configuration when it looks for the Templates folder. For example, say you have a site hosted at the following address:
    https://www.yourdomain.com/yourfolder/
    Contribute is configured to know your site is in /yourfolder/, but for whatever reason, when you open or create a page, and Contribute reads the InstanceBegin template="/Templates/file.dwt" tag at the beginning of HTML documents, it looks for a Templates folder at the HTTP server root, not in /yourfolder/. This prevents Contribute from loading the template while editing a document, and any attempt to edit Template Properties will yield the infamous "Unable to set template properties" dialog box."

Maybe you are looking for