Manage Profile Targets

Post Author: cbaumann
CA Forum: Publishing
Hi all
I am testing a publication with profiles. In my profile I can add my universe. But here is 1 field for the Class Name and Variable Name.
the class name would be the folder in my universe while the Variable is the object in this folder. How can I combined 2 folders or values?
Having a folder called Names and a subfolder called Firstnames with some Values inside. Names,Firstnames or Names;Firstnames ? Can't find a good description about how to use this stuff really.
Thanks, Chris

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

Similar Messages

Printing ICC Profile Targets

Can you use Aperture to print printer profile targets without any colour management. Maybe I'm missing something but I cannot see how this can be done. If this has already been answered can you point me in the right direction cannot find anything myself. Thanks.

Can you use Aperture to print printer profile targets without any colour management. Maybe I'm missing something but I cannot see how this can be done. If this has already been answered can you point me in the right direction cannot find anything myself. Thanks.

Request status in Manage data targets

Hi
I have an ODS, which loads from a flat file. When I load data, during activation I am getting error on subsequent processing stage with status 5. What is interesting to me is, request is available for reporting icon is turned on, but I am seeing a status RED on Manage data targets. Even if I try to change manually the status to green as I am seeing the data, it didnot allow me. The error I am seeing on details tab of monitor is as shown below..
Activation of data records from ODS object ZQM_O55 terminated
System error occurred (RFC call)
Record mode Y unknown (data record REQU_3ZRQHGCF4GHOFNNP818446N3F/000001/150), activation failed
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 incorrect with status 5 in rsodsacstreq
Request REQU_3ZRQHGCF4GHOFNNP818446N3F, data package 000001 not correct
Inserted records 1-; Changed records 1-; Deleted records 1-
Eventhough it says activationt terminated with errors, how it got the icon on request for reporting option on? How to correct this issue? What am I missing. when does the record mode Y record will be created? Any help would be highly appreciated.
Thanks
Pandiri

Hi!
I had a similar problem, check your file and ods definition, maybe it is not correct.... and before you load replicate datasource and re-activate the transfer rules.....
I hope this can help you.

No customizing data found for content management profile

Dear All,
When we configured a business role for our call center agent, we copied existing out-of-box role and assigned to user's local own data. When the CRM Web UI was called, the window popped up fine, but there was an error message:
No customizing data found for content management profile
Can anybody advise why this error comes? I checked the content management profile in our system. There are 3 profiles there but I am not sure if any of them is linked to the nav bar profile we defined. Where to define it? How to remove this error message?
Thanks in advance!
Leon

Hi Leon,
To start with you need to check the details of the Business Role. Goto SPRO>CRM>Business Role-->Define Business Roles
Select your Business Role and click on details, You can check if Role config key, Nav Bar profile, layout profile, Technical profile and PFCG Role ID is properly assigned.
Once you assign the above profiles to business role you then assign Position like for e.g. Sales rep and Employee to the org model in PPOSA_CRM. Then select the position and goto menu bar and click on Goto>Detailed Object>Enchanced object description. Select Business role in the Infotype name and click in create infotype. Assign your business role.
Check logging in after performing the above step. If it doesnt work assign the parameter ID - CRM_UI_FRAME and parameter value - X in the tcode SU01 for the user in CRM. Also assign SAP_ALL role just to make sure if it works.
Hope this helps.
Regards,
Chandrakant

Profile Target with 2 Filters: Is it possible for WebI Publication?

Hi Guru's,
My requirement is I have a report with Sales Representatives in a Web-I report coming from 2 different objects. The source tables are also different. The data is merged into the report level. My requirement is I need to filter for Sales Representative name and use publisher to do a report bursting. But in Profile Targets they allow to just put one filter. And with that my purpose is not solved. Is there any way I can have 2 filters in Profile Target and use an "AND" condition so that Sales Reps from both objects are filtered.
Regards,
Subhasis Das

No, the email address is the "username" for the Sync account, you need a different email address for each Sync account that you setup.

Performance Tab in Manage Data Targets

Hi.
In the Performance tab of Manage Data Targets screen, under DB statistics, it's stated "10 percentage of IC data used to create statistics".
What does this mean?
Thanks,
Sai.

Hi Sai,
here is some info from SAP help:
"Specify the percentage rate of InfoCube data that is to be used for compiling statistics.
The larger the InfoCube is, the smaller the percentage rate you should select, as the system expenditure for compiling statisics increases with the increase in size."
"For up to 10 million entries in the InfoCube, you should set the percentage of InfoCube data, that is used for creating the statistics, to 100%."
Hope it helps!
Bye,
Roberto

Managing Profile Pictures

Is it possible to manage profile pictures through SKYPE Manager? I want to make sure that all accounts have a consistent picture, being the company logo. Thanks.

I cannot see the reply to this post. I just got a new/old Mac and had to reload Skype and now I cannot see my contact profile pictures. Can this be fixed?

Windows Connection Manager Profile Installer Has Stopped Working

Hi all, I thank all who can help me with this problem beforehand and will do so after.
I am an IT technician at a university in South Africa. I am trying to install a custom made VPN program that works perfectly on every other machine but not this one laptop.
It is a Lenovo G580 laptop running Windows 7. Every time I try to install the VPN i get the error message that Microsoft Connection Manager Profile Installer has stopped working.
I have made sure all the updates are installed.
I have done disk check.
I have done System File Check.
I have done Windows Repair.
I have coppied the cmstp.exe and ole32.dll files from one windows to the problem computer.
I have taken permission of both the above mentioned files.
I have done anti-virus scans and anti-malware scans.
I have tested that other applications(not VPN's) install correctly.
I have tested that the VPN installed correctly on other computers and pulled a new one to make sure the application was not corrupted.
Error details:
Description:
Stopped working
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   cmstp.exe
Application Version:   7.2.7601.17514
Application Timestamp:   4ce7a860
Fault Module Name:   ole32.dll
Fault Module Version:   6.1.7601.17514
Fault Module Timestamp:   4ce7c92c
Exception Code:   c0000005
Exception Offset:   00000000000284fb
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1078

Hi,
Generally speaking, this error can be caused by one or several of the below factors:
a. The dll file is deleted accidentally from your system
b. The dll file is damaged due to virus or spyware infection
c. improper software removal
d. The dll file was overwritten by an incompatible version.
e. Outdated hardware drivers
f. Too many invalid/obsolete registry entries.
g. Related registry entries is corrupted.
I would like to suggest you try the following steps to check the results:
a. Do a system restore to undo recent system changes. If the error is just caused by the file getting corrupted or damaged, performing a system restore would help you to get a fresh copy back and also fix the related error well at the same time.
b. Update the drivers for hardware devices and install any available Windows updates.
c. Test in a new user account. If it works, please refer to Fix a corrupted user profile.
Fix a corrupted user profile:
http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile
If the individual troubleshooting advice above is unsuccessful, performing a startup repair or repair installation should restore all Windows DLL files to their working versions.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Profile and profile target

Hi!
I am trying to use Personlization when I am publishing a document. I have created a Profile with a Profile target and a filter expression (Web Intelligence formula expression. I have added a Group to the Profile.
Then I created a Publication and added my profile and also the Group to Enterprise Recipients. I run the publication and opened it as a member of the group but the data was not personalized. Then I also added the group to User Security in the publication but still the same result. Have I forgotten any settings somwhere? Which steps during a configuration is important to do to get this work? Anyone that can recommend some documentation for this?
Thanks,
//Marianne

Hi!
I thought we had r3 but it is an evaluation license we have cause we are just about to upgrade and the only information I can found is that it is version 12.1.0 on our test installation.
The "formula" is on an object in a universe and then there is a filter expression that says that the object should be equal to a certain country. I have also tested the expression In list....
Regards, Marianne

How to manage profiles in airport utility 6.3.1

Anyone had any luck managing profiles, checking logs, signal strength, or any other function that ( apparently ) has disappeared on the 6 series Utility?

Thanks for the reply!
If Apple can't/won't add back that functionality, it will be very hard on anyone whose needs are not simply on/off, default configuration... I'm currently using v5.6.1, but how long will that work as time & firmware move forward?
I believe I am sad.

Remote Management profile disappears on reboot.

Yosemite Server. Yosemite iMac and MBP were updated using Net Install from the server. MBP's that were not set up using Net Install do not have issues.
mdm_profile.mobileconfig and other profiles delete upon reboot. Trust Profile are placed on computer. Enrolled computers through myserver/mydevices to place mdm_profile.mobileconfig on each computer. Other profiles will be pushed to each computer successfully. After reboot they disappear. I had System Preferences open and one by one they were deleted.
It appears to have something to do with the Net Install, due to the fact that they are the only computers that this occurs on. Any ideas?

It is possible. I just ran into this myself. The key is in understanding the difference between Supervised and unsupervised devices. Only supervised devices can be locked to an organizations profile manager. Devices are considered supervised when they are purchased by a company with a business account and account manager from apple.
If the device is supervised there are now additional settings you can adjust. You can also create device groups. Any device purchased from apple without a business account, or from anywhere else, is considered to be an unsupervised device. You can still add it to profile manager and control a lot, but the end user will be able to remove the Management Profile, and thereby all other profiles rolled out on the device or user level.
When you purchase from the apple business store, your account manager will set up a list of the devices.
You log into the Apple Deployment site and enter your order number.
All your new devices are auto ported into your profile manager.
At that point you can set them to device groups
set device groups settings
then when turn them on they will force you to login, register, etc etc.
After that you can layer on device and/or user profiles on top of your group profile.

Airport base station Manage Profiles dimmed

I cannot do this (Manage Profiles dimmed):
"AirPort Extreme and AirPort Express Base Stations can store up to five configurations, known as profiles. A profile contains base station settings, such as names and passwords, and network configuration information, such as the way the base station connects to the Internet."
http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2114.html1http://d ocs.info.apple.com/article.html?path=Airport/5.0/en/ap2114.html
iMac Intel Core 2 Duo 2.16 GHz
AirPort Utility 5.2.1.app
AirPort Firmware 5.7
Airport Extreme Base Station w/ Modem & Antenna
Port M8799LL/A
System Version: Mac OS X 10.4.10 (8R2218)
Kernel Version: Darwin 8.10.1

I am sorry to say that your last post answered your question and your problem.
Symantec...... If you have anything Norton on your Mac, chances are better than not there is your problem.
1st The Firewall that comes native to Mac OSX and the Unix Operating System is one of the best.
Norton Products have shown to be very disruptive to Mac Systems, Period.
When you mention you disable Norton Firewall and all is well then it just bears out that Norton is your problem.
I think your problem will go away when everything Norton is gone.
Here is the link to UnInstall.
http://www.symantec.com/techsupp/files/navm/navmac_9files.html
Good Luck, This should solve your problems. Don

Keyboard shortcuts for Power Manager Profiles?

is it possible to set up keyboard shortcuts to switch between Power manager profiles? I have several set up in Lenovo Power Manager, and often want to switch between them without having to open the Power manager app every time. It would be good to switch between a "Maximum Performance" and "Maximum Battery Life" with keyboard shortcuts.
Thanks in advance.

I too am looking for this.
Workaround:
Create a shortcut to C:\Program Files (x86)\ThinkPad\Utilities\PWMOSDV.EXE somewhere, and then edit the shortcut properties to add a key combination, lite CTRL+ALT+4.
This will open up a profile selector.

Manage Profile Services - Unable to edit User Properties or User Profiles

SharePoint 2013 - fresh site, with Mysites, and the User Profile Service running. The UPS is ran under a separate account, and the farm account has securityAdmin rights and directory replication rights.
When I enter Manage User Properties, I get a complete list of properties but no way to edit them, the same happens when I go into User Profile Properties, there is no where to edit the users. Has anyone seen this before and if so what step have I missed
in setting the UPS and MySites Up.
Both Administrator and Farm Admin have Administrator rights to the UPS Application, and it's the Profile User Service that's running at the minute not the Profile User Synchronization Service.
Any help would be appreciated.
Thanks
David

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

OD replica - managed profile settings

I have two ML servers, one is set as the OD mater and the second as the replica. The replica 'sees' the users and groups in the master, so all seems well.
But what settings should I have for the managed profiles (ML clients)?
Currently, I have the client computers with a managed profile that has both servers under the Directory setting, and all usesr with a managed profile that serves only the master as the LDAP server.
I'm not sure whether I should serve the Directory and LDAP to the computers or the users, and whether they should be served both servers or only the master.
Also, for the LDAP is is OK to have the search base as dc=ldapserver,dc=company,dc=com, or do I need to stipulate user base as well?

Glenn, as always please read the manuals, but from my understanding if your clients are running 10.3.9 and 10.4.x, you will only need the OD master configured in Directory Access. Once the client is booted it will get info on replica's, thus if your master is down it will already have info on the replica(s) and login, permissions, etc will continue to work as they did before.
The second question "downgrading the master to standalone", not sure why you would want to do that unless you have some major problems with the file system, etc. If you must destroy the master make sure you promote the replica ASAP. After fixing the original "master" you can then re-promote it and make the original "replica" a replica again.
Hope this helps....

Manage Profile Targets

Similar Messages

Maybe you are looking for