Manage Queues - Messages are in Schedule status after upgrade to ERP2004

Hi,
We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
When I click on the queues it is in running status.
Does anyone has any idea where should I look?
Thanks in advance!
Mrudula

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

Similar Messages

How to clear the message which are in scheduled Status in PI 7.3

Hi,
We want to clear/cancel the message in Message monitor which are in scheduled status in PI 7.3.
It only a JAVA Stack System , We have been trying to clear the message manually but it take more time resulting into performance issue.
Is there some other way we can clear it from Database level.
Our Database is Db2 9.7 with Fix Pack 5
Can anyone help me in clearing the message at fast speed ?
Thanks in advance
Amit Shedge

Hi,
First we check the status of Message
a) db2 => select count(*) COUNT, status from sap<sid>db.bc_msg group by status
COUNT STATUS
110        DLVD
641623   NDLV
2 record(s) selected.
Then we update the status of Message to Failed
b) UPDATE BC_MSG SET STATUS='FAIL' WHERE STATUS IN ('DLNG', 'TBDL', 'WAIT', 'HOLD', 'NDLV') AND SENT_RECV_TIME <= '2014-22-03 00:00:00'
c)
select count(*) COUNT, status from sap<sid>db.bc_msg group by status
COUNT STATUS
183      DLVD
641623 FAIL
d) Then we started the Standard deletion Job in NWA
db2 => SELECT COUNT(*), STATUS FROM SAP<sid>DB.BC_MSG GROUP BY STATUS
1 STATUS
98 DLVD
And the message got deleted.
Thanks & Regards
Amit

After each Error Message,the follwing messages are in Scheduled in ECC SMQ2

Hello Everyone,
After each Error Message thrown from ABAP Proxy, the next following messages are in Scheduled in ECC SMQ2 tcode. Can anyone suggest me how to overcome from this issue?
Thanks,
Prashanth

Hello,
Please, any one respond to my question. I have been trying to get out of this issue but could not.
Thanks,
Prashanth

Messages remain in Scheduled status in message monitoring in RWB

Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
Dhawal

Hi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal

Messages are in Scheduled State

Hi
some of my messages are in scheduled state. i verified SMQ1,SMQ2 . no queues are in block state. also i executed register queues in sxmb-adm still they are same state. how can i make them as successful state. only by restarting the messages or is there any other way? also tell me why these messages went to scheduled state

Reddy,
Can you please check this threads for possible solutions:
Problem with scheduled message in SXMB_MONI
SXMB_MONI - Message scheduled on outbound side (no queues)
Regards,
---Satish

Messages goes into scheduled status in adapter engine

Hi all
we are doing idoc to file scenario with direct mapping. the messages are getting processed in integration engine sucessfully. the messages are getting into scheduled status in the adapter engine even when there is less load in the server.
Thiis specially happening for IDOC to file scenario only. Any help is highly appreciated
Thanks

>
> the system is quite good at the moment but the some of the messages again into scheduled status like ( 10 out of 1000 messages ) . the system is not performing at 100 % rate since some messages moves to scheduled status. Is still the performance can be improved in any other ways ?
>
This is really strange behaviour , If Communictaion channel functioning correctly then all succesfull messages should deliver to Receiver system.
Better to check payload of scheduled messages(if wrong payload obiously it goes schedule status),try to to reprocess them.
I never used XCOPY command,so no comment on that.
Regards,
Raj

Why can't I receive text messages from other iphone users after upgrading to iOS 8?

Why can't I receive text messages from other iphone users after upgrading to iOS 8?

Hey DebC2001,
Thanks for the question. After reviewing your post, it sounds like you are having trouble with iMessage. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Messages
Thanks for using Apple Support Communities.
Have a nice day,
Mario

SMQ2 queue is blocked and messages are in u201Cwaitingu201D status in RWB

Hello,
A SMQ2 queue is blocked with XXX data and these messages are in u201Cwaitingu201D state in RWB.
What could be the reason?
Im sure its not because of the space because all the messages which flow after that was there in the directory.
Regards,
Mathangi

Hi Mathangi,
double click on the queue and click on the first message which will direct to MONI
--> check what exactly the error is and try to resolve the error accordingly
if you are unable to do that
Right click on the first message and save LUV it will be saved in SMQ3
then unlock the queue and execute again it will process successfully..
later you can process the message which is saved
Regards,
Naveen

Messages are in schedule state

Hello all,
I done flat file to flat file scenario. In sxmb_moni error showing "scheduled flag for my interface". If i went transaction SMQ2 click on display button then messages are going to showing the status: schedule for out outbound processing. In message monitaring messages are in To Be Delivered status and Waiting Status. If i resend those messages, status are not changing. Please help me out from this problem.
Thanks

Hi,
chk in SMQ1 and SMQ2 and delete the entries .
if your queue is registered as inbound and outbound.
also chk in SMQR if ur queue is registered as Inbound or Outbound
reward points if helpful...
PrashaNt

Messages are in schedule state in adapter engine

Hi PI Gurus,
In Production system, I have a proxy to JDBC scenario (Using AAE).
From ECC messages are flowing successfully, but when I check the WRB I found no message.
When I checked the Message Monitoring I found, those messages were in schedule state. No logs are also maintained.
Any idea, what is the reason.
This scenerio is working fine in QA and Dev.
Thanks,
Krishna

Hi krishna
Monitor your JDBC communication channel in CC monitoring , if you found any error in CC , then take an action accordingly.
if CC status was gree then check JDBC Adapter Service in NetWeaver Administrator and stop and start it
otherwise can you please check the status of message in sxi_monitor and also check if it is stuck in smq2? Let us know what error you getting in sxmb_moni or the flag of message. As suggested above, check the status of communication channel of JDBC adapter and what errors you getting there if any.
check this link;/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Edited by: haribabu.karasala on Jul 13, 2011 8:03 AM
Regards
Hari
Edited by: haribabu.karasala on Jul 13, 2011 8:04 AM

Local disks are in FAIL status after installing the cluster

The /var/adm/messages log isn't giving me much info to go on. This has happened twice now. After installing the cluster, my local disks are in a FAIL status and the cluster is not giving me much information why.
It's a two-node cluster w/ x2100 M2s.
Any ideas?
-Hedo

when I run cldevice status -v, it reports that the two local disks are in FAIL status on each node.
That's all that's going on right now. Everything else seems to be perfect, other then those disks in FAIL status.
== from /var/adm/messages ==
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d12s0 has changed to FAILED
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d11s0 has changed to FAILED
-hedo.

Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

Guys,
First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
Services in error state under the event viewer:
Event Type:   Error
Event Source:   CSAgent
Event Category:   Kernel Rule
Event ID:   256
Date:       7/29/2014
Time:       11:42:41 AM
User:       N/A
Computer:   UNITY
Description:
A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
Event Type:   Error
Event Source:   CiscoUnity_MALEx
Event Category:   Error
Event ID:   30012
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation. The SysCheck utility may assist in diagnosing the problem.
Event Type:   Error
Event Source:   CiscoUnity_Doh
Event Category:   Error
Event ID:   32013
Date:       7/29/2014
Time:       11:44:27 AM
User:       N/A
Computer:   UNITY
Description:
Doh logon failed due to messaging component logon error: 8004052eH
I found and followed to the letter:
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
I also went ahead and ran GUSI with some mixed results under environment information:
SQL Version = Microsoft SQL Server 2000 - 8.00.2282: unknown SP
SQL Edition = Desktop Engine
Windows version = 5.2 Build 3790: Service Pack 2
Outlook is not installed on the local server
MAPI Provider : CDO Version - 6.5.8211.0
MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
AvCsMgr : is set to recommended value
AvMsgStoreMonitorSvr : RegKey not found. Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvNotifierMgr : RegKey not found. Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
AvUMRSyncSvr : is set to recommended value
CsBMsgConnector : RegKey not found. Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsBridgeConnector : RegKey not found. Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
CsVpimConnector : RegKey not found. Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
TCPChimney : Disabled
RSS : Disabled
*Pulled from UnityDB Configuration Table*
ExcludeAllReceipts : 0
ExcludeReturnReceipts : 0
DisableSearchFolderUse : 0
MinSearchFolderLifeHours : 1
OptimizeSearchFolderUse : 0
I tried following and deleting the Unity System Profile:
https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
But I am still scratching my head. Any direction will be appreciated.

Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question. Anyways, this post could serve for future reference.

My instant messages are not being recognized after update

After I did the latest update, some of my instant message are not coming up with the person's name from my contacts, rather, just the phone number is showing up.

Try resetting the SMC and pram
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
To reset PRAM/NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
Appearing following way
UI_APPR_XML_PROVISIONER_EMPTY_TABLE
UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
Any help on this will be appreciated.

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

Manage Queues - Messages are in Schedule status after upgrade to ERP2004

Similar Messages

Maybe you are looking for