Manage Server 2012 Backups from Windows 8.1
Hello,
I am trying to find out if it is possible to manage server 2012 backups from a windows 8.1 workstation via GUI or is the CLI the only option?
I found a few articles online that mention to use a computer management console > storage > backup (but from what I know it only works if you're connecting from a 2012 server itself)
Thank you in advance!
Hi,
We cannot manage server 2012 backups from a windows 8.1 workstation. Ye may need to use Remote Desktop Connection to access server 2012 from windows 8.1 workstation. In additional, we could manage server 2012 essential backups using dashboard on Windows
8.1 workstation.
For more detailed information, please refer to the article below:
Get Connected in Windows Server Essentials
http://technet.microsoft.com/en-us/library/jj713510.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Cannot browse to Server 2012 shares from Windows 8.x
I can't conntect or browse to any shares on a 2012 server from a Windows 8.1 client. I can connect from Windows 7 to server 2012. And from Windows 8.1 I can connect to 2008 servers. Is this a new security feature/setting on Windows 8.1 or on Server 2012?
Hi Spetroski,
Based on your description, I’m a little confused with your question. Please let me confirm something more.
Is it in a domain environment? Did you mean you type the share path in
Run, and then access share? If so, please check if use server’s IP address to access, will the same result?
If I misunderstood the connection way, please don’t hesitate to let me know.
Please confirm which following scenario is similar with current state of this issue.
When use Windows 8.1, you can connect to server 2012. However, can’t browse and access all shares that host in server 2012.
Can’t even connect to server 2012, when use Windows 8.1.
If none, please feel free to let me know some details.
Meanwhile, please let me know if you can find some error message when this issue occurred. If can find, please
post the complete error messages here.
Hope this helps.
Best regards,
Justin Gu -
I can't access folder share in WIndows Server 2012 R2 from windows 8.1
i have a strange case:
I have a Windows Server 2012 R2 machine with a shared folder. Accessing this folder using a Win7, Win8,
Win 2008 R2 machine using \\servername works fine but form windows 8.1 or windows
2012 r2 i can't so any one can help me.Hi,
Would you please let me know the complete error message that you can find, when can’t access to the share folder
that host in the Windows Server 2012 R2?
If you logon the Windows 8.1 (or server 2012 r2) with administrator account, will encounter the same issue?
Meanwhile, please access the share folder via \\server’s IP address\share folder. Then please check if this issue still persists.
In addition, there is a similar thread. Please refer to and check if can help you.
Can't
access UNC share on Windows Server 2012 R2
Hope this helps.
Best regards,
Justin Gu -
SQL Server 2012 Express on Window 8.1 64 bit version?
Hi,
I´m trying to install SQL Server 2012 Express on Windows 8.1 64 bit version. When I reach the point of "Installing Setup Files", of the installation process, the installation seems to halt. I´ve tried both the 32 bit and 64 bit versions of SQL 2012
Express. I´ve installed SQL 2012 Express several times before on other Windows versions but I´ve never encountered this problem. Is it a known SQL Server 2012 Express/Windows 8.1 64 bit compability problem?
Thanks in advance!
MartinSQL Server 2012 express can be installed in windows 8.1 all you need to take care is that you meet
hardware and software requirements . Please read the article in hyperlink carefully.Make sure you have internet connection because it is required. Make sure you meet all .net
framework requirements
Below link would be helpful as well.
How to use SQL server on Windows 8 environment
Please remove any previous failed installation of SQL server from add remove program. If you still face issue please refer to Solution section of
this link for manual un installation.
Finally you can locate log files present at location
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\summry.txt for details about log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Server 2012 vs. Windows 7 / 8. What should a newbie choose?
Hi there!
Am here with a newbie question. Ive been running a Windows Home Server 2003 for several years, and learned alot had great use of it. But the hardware got old, and I wanted to buy a new server.
So, right now I am running my new server with Windows Server 2012 trail, and I've had quite alot of difficulties. So after getting stuck with a Certificate Autority-something, am starting to really wonder if I'd rather should use Windows 7 or 8 to run my
server. Then I dont have to understand all the extra stuff comming with the server edition, but the reason I have this is also to learn how to setup a server.
What should I do? Everyone I know who's interested in server-management is using Linux, and am allways getting stuck with hours of googling, doing stuff that learn a bunch of, but takes me way too much time.
I really wanna learn, but am getting a little fed up with getting stuck all the time.
Just to mention it, am using my server mainly for http, php, mysql and ftp service, running file-sharing over my network, and stuff like that, but really enjoy the more advanced features I had on the server 2003 that I could experiment with.
What do you think?Hi atomprompen,
Besides the suggestion of using Windows 8 Professional, you may also consider to use Windows Server 2012 Essentials.
Windows Server 2012 Essentials is the latest version of Windows Small Business Server. Windows Server 2012 Essentials is a flexible, affordable, and easy-to-use server solution designed and priced for small businesses with up to 25 uses and 50 devices that
helps them reduce costs and be more productive.
Also, Windows Home Server has seen its greatest success in small office/home office (SOHO) environments and among the technology enthusiast community. For this reason, Microsoft is combining the features that were previously only found in Windows
Home Server, such as support for DLNA-compliant devices and media streaming, into
Windows Server 2012 Essentials and focusing our efforts into making Windows Server 2012 Essentials the ideal first server operating system for both small business and home use—offering an intuitive administration experience, elastic and resilient
storage features with Storage Spaces, and robust data protection for the server and client computers.
For more details, please refer to
Windows Server 2012 Essentials FAQ.
We can also download
Windows Server 2012 Essentials trial to evaluate it.
More information:
Windows Server 2012 Essentials Homepage
Windows Server 2012 Essentials
Hosted Windows Server 2012 Essentials
Hope this helps.
Jeremy Wu
TechNet Community Support -
How to take SQL Server Database backup from DB side
Dear All,
Please suggest how to take SQL Server Database backup from DB side?
System Info-
Portal Server (EP7)
MS SQL Server
Microsoft Windows 2003 Server
Suggest ASAP.
Thanks & Regards,
SameerHi,
I am planning to take SAP DB backup I need the procedure how to take backup. With in the server.
My Operating System is IBM AIX
Database is Oracle 10g
SAP BI7.0 through this I need to take backup.
Note:
1) First of all I gone to /oracle/<SID>/102_64/dbs/init<SID>.sap and I changed the settings backup_dev_type = disk
backup_root_dir = /home/db0/test/sateesh/DB0backup
stage_root_dir = /home/db0/test/sateesh/DB0backup
2) Then I gone to BRTOOLS I changed to disk there I scheduled Online backup
3) Then I came to SAP DB13 I want to take daily backup. But the backup is not going properly what to do any mistake I had done
Try to give the valuable solution to take Online backup -
RMAN Backup from windows to Linux
Hi,
I am having Windows 2003 server Oracle 10.2
and I have RHEL5 and Oracle 10.2
I have taken a RMAN Oracle Database Backup from windows..
I have installed oracle software on RHEL5 and now i need to restore this backup to the Linux
it is possible to restore it? if possible can any one let me know the process?
Regards,
Vijayaraghavan KI have another doubt
I took RMAN full DB Backup - it comes around 2.5 G (performed on time 9.00 A.M morning)
When i perform differential incremental backup it comes around 2.6 G (performed on time 9.45 A.M )
Why it is coming like this.. The backup should happen only for the changed blocks alone?? i.e it should come around 10 Mb or 20 Mb?? Why is like this? or my understanding of differential backup is wrong?
I issued the below commands for Full DB Backup and Incremental Backup...
FULL DB backup at 9.00 A.M
RMAN> BACKUP INCREMENTAL LEVEL 0 DATABASE;
Differentail Backup a 9.45 A.M
RMAN> BACKUP INCREMENTAL LEVEL 1 DATABASE;
Regards,
Vijayaraghavan K -
The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllecehello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer -
Free Download Sql Server 2012 Full for windows 7 64 bit
hi,
im new here and i want to download sql server 2012 complete for windows 7 64 bit.
If any one help me to find it.You need to buy SQL Server 2012 Developer Edition for 50$ or as Shanky_621 suggested
download a free edition named SQL EXPRESS which has some limitations.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
SharePoint 2013 Server OS upgrade from Windows 2008 R2 to Windows 2012 R2
Is it possible to have SharePoint 2013 farm to have mixed version of OS (Windows 2008 R2 and Windows 2012 R2).
We have a request to upgrade our farm servers from WIN 2008 R2 to Win 2012 R2. We have 5 servers in farm -
2 App servers - running with Central Admin, Service Applications, User Profile
3 Web Front End Servers- running web application, search and workflow manager
the database layer is separate on sql 2012 R2
We want to upgrade OS from windows 2008 R2 to windows 2012 R2 and SQL to SQL 2014.
What will be right approach to do OS upgrade in above scenario to minimize the impact of downtime.
May be add windows 2012 based servers in farm one by one and replace the windows 2008 R2 based servers from server.
Regards,
Kunal AbrolIts possible, but I wouldn't recommend it. The problem is that you can only install SharePoint 20103 on Windows Server 2012 r2 using the slipstreamed SP1 version. I assume that you used the regular version to install on you Server 2008 r2 versions.
Even if you upgrade those servers to SP1 there are some minor differences in the builds between slipstreamed SP1 and upgraded SP1. So although it will work it isn't recommended.
Also, you should be aware the upgrade of inplace SharePoint servers running Windows 2008 r2 to Windows 2012 r2 is not supported.
To upgrade to server 2012 you'll need to add 2012 servers to your environment using the slipstreamed version os SharePoint and then remove the old server 2008 r2 servers as soon as possible. For the period of the upgrade you should be able to get away
with running the farm in a mixed state.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
I have done a windows full server backup on to an external Seagate HDD on a Dell PowerEdge T110 II Server running Windows Server 2008 R2
I want to clone this and do a Bare Metal Restore on an identical server at home which has Windows Server 2008 R2 on it.
I boot from the Windows DVD provided, select repair however windows Server 2008 R2 will not find the image of the Seagate drive. The Seagate drive can be seen on the server otherwise. I guess there are options to load the driver, but I don't see them.
Please help. Kind of stuck here
ThanksI am using a windows server 2008R2 disk to boot up. Both the servers have windows server 2008R2 on them. I have two licenses for each of the servers. I want to use the server at home as a backup server in case the server in office goes down. I used
windows server backup to backup the server at work to a portable USB hard drive. I bought the hard drive home and want to clone the server at work. I heard bare metal restore is the best way to do this. So I booted the server at home with the windows server
2008 r2 disk that I have and clicked repair. I had attached my seagate portable drive to the usb port so that the server could find the image of the server at work, however the server cant find the hard drive or the server image. Is it a problem with my usb
hard drive? Do I need a specific type of usb hard drive to do server image backups?
If I let my server at home boot regularly and it comes up, it can see the image on the hard drive so I dont know how to do the bare metal restore. I know it can be done becuase my IT guy did it when he set up both the servers. I just want to periodically
clone them so make sure the server at home is updated with the settings of the server at work.
Thanks for any help here -
Hi
I have windows server 2012 which is my domain controller. It has 2 hyper visor virtual machine that they are 2012 too. I have an additional domain controller in another location too.
I want to know, how can I restore a bare metal or system state backup to another machine, to have a domain controller same as old one whit all the properties, rules and features.
ThanksHi Mehdi,
Yes, it is possible to restore Windows backup to a different machine with different hardware. This article, although written for Windows Server 2008 still applies in 2012:
https://support.microsoft.com/en-us/kb/249694
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach -
Windows server 2012: migration from 2012 standard evaluation version to 2012R2
Hello.
Is it possible то migrate
FROM: windows server 2012 standard evaluation
TO: windows server 2012R2 standard
And if it is possible then "how to"?
Activation product key for 2012 is NOT available.
Activation product key (MAK, "open licence") for 2012R2 is available.
The key for 2012R2 does not "open" 2012 evaluation version.
Thanks.Upgrade means moving from your existing operating system release to a more recent release, while staying on the same hardware. For example, if your server is running Windows Server 2012, you can upgrade it to Windows Server 2012 R2. You
can upgrade from an evaluation version of the operating system to a retail version, from an older retail version to a newer version, or, in some cases, from a volume-licensed edition of the operating system to an ordinary retail edition.
ref : http://technet.microsoft.com/en-us/library/dn303416.aspx
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread. -
SSMS for SQL Server 2012 Express on Windows Embedded 8 Standard
Hello,
I have installed SQL Server 2012 Express with Advanced Tools (SQLEXPRADV_x64_ENU.exe, downloaded from MS website) on Windows Embedded 8 Standard 64-bit. But, when I try to find SQL Server Management Studio, I realized it's not installed (same installation
package works fine on my Windows 8.1 Pro 64-bit laptop, where SSMS gets installed). How do I fix this? And any other ways for trouble-shooting DBs on Windows Embedded 8 Standard?
Thanks,
JayBelow is the content of a summary file for the installation. BTW, I also try to find its ConfigurationFile.ini file for future installation on other computers, but it's not in the folder specified in the summary file either (see below).
Thanks.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-04-15 13:57:59
End time: 2014-04-15 14:13:29
Requested action: Install
Machine Properties:
Machine name: AIMB-584
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\e089c9dde791653620\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, BIDS, BOL, SSMS, SNAC_SDK, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: AIMB-584\User
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140415_135512\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Passed
Feature: Database Engine Services
Status: Passed
Feature: Full-Text and Semantic Extractions for Search
Status: Passed
Feature: SQL Server Replication
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140415_135512\SystemConfigurationCheck_Report.htm -
Daily Server 2012 backups to different drives
We have a Windows 2012 server that runs AD and Hyper-V with 2 VMs. Total disk space is 2TB. We have 5x 2TB USB disks that are rotated daily from Monday to Friday. Currently I have a scheduled task that fires off a batch file with the following in it:
wbadmin start backup -allcritical -systemstate -include:"c:" -backuptarget:E: -vssfull -quiet
WSB backup performance is currently set to "Normal backup performance".
The reason I went this route is because I had issues trying to get WSB to use all 5 drives in rotation through the GUI. Connecting all 5 drives at the same time when setting up the backup is just not feasible.
When I initially configured the backup it ran fine for the first 2 weeks whereby the backups would take about 16 hours to finish which was fine (starting at 6pm and finishing around 10am the next day). For some reason now the backups are taking around 26 hours
to finish which I don't understand as the size of the data hasn't changed much.
I have now changed the performance to "Faster backup performance" but I'm not sure if it will work with the drives being changed daily as the comparison of say Monday's snapshot on the server will be different to the backed up data on Tuesday's drive.
Or alternatively, if the comparison of changes is only done on the server and the differences are copied across, will it cause issues when trying to restore the backup?
Basically what I need to achieve is:
- The RPO is 1 day so that in the event of catastrophic failure we need to be able to restore the server completely to the previous day (obviously within reason of when the catastrophe occurred).
- We need 5 days worth of backups from Monday to Friday.
- Each drive is swapped out daily to be taken off site.
If I need to look at doing a full backup every weekend and leaving a single drive connected for the week for "incrementals" then I can discuss that with the managers but that would change the RPO to the previous week instead of the previous day if
the building burns down for example.Thanks for the feedback PrashKom. What difference will leaving out -backuptarget make? From what I can see at http://technet.microsoft.com/en-us/library/cc742083.aspx it is required to have that switch.
Changing the backup performance doesn't seem to have made any difference in terms of the speed it takes as it is only on 68% complete 13 hours after starting.
Do you think there will be any difference in changing from wbadmin start backup using task scheduler, to using wbadmin enable backup? I see in http://technet.microsoft.com/en-us/library/cc742130.aspx that they have "wbadmin enable backup –addtarget:H:"
but from my understanding is that setting the schedule will remove the drive letter and rename the drive like it does in the GUI.
Maybe you are looking for
-
Hi all, I need some information regarding Customer and Vendor Invoices 1. Can any one please help me what are all the tables that update when we post customer and vendor invoice with F-22 and F-43. please give me all relevant information,. I w
-
How would you draw a soccer goal?
Hi guys, this might be really basic for the pro's out there, but I'm just a beginner with Fireworks. Basically, I'm trying to draw a soccer goal (at least the frame of it) making it look like metal. There are styles that provide this sort of finish i
-
Urgent....Restock Rate,Restock value
Hi.. Cany any one tell me from which tables the Restock Rate and Restock value comes from???? Basing on the Condition type provided... i want to retrieve...Restock Rate and Restock value... Structure KOMV- Find where KSCHL equal ZRE%, IF found, th
-
Can I Use dbDatasource for a Business One Form
Hi, I have to update the sales order items grid from a user defined add on form. I am using dbDatasorce for my user defined form. to fill the grid, but i am unable to create dbdatasource for the sales order form. Can any one help me plzzzzzzzz.
-
Flash plugin in browser performance
I'm a noob Flash developer and I've just noticed that when I run my .swf from within a browser (using the latest Flash9 plugin), the .swf runs ~30% slower when compared to just double-clicking on the .swf (in this case, uses my installed Flash7 .exe,