Manage user Properties
Hi All,
I am planning to import some users from AD to Sharepoint. The user profile sync service has started successfully. I could configure the sync connnections successfully and I did a full sychroniczation.
When i go to manage user profiles, the user is listed but i cant edit the profile. Same goes for manage user properties where the field can't be edited.
Rgds,
Ashley
Hi Ashromeo,
Whether you could not edit all fields in the user profile or just some fields.
Whether there were some errors when you tried to edit user profile.
Please have a try with the farm account, compare the result.
Please provide some screenshots about this isue, it will make others in the forum easy to find a solution for you.
Best Regards,
Wendy
Wendy Li
TechNet Community Support
Similar Messages
-
Manage Profile Services - Unable to edit User Properties or User Profiles
SharePoint 2013 - fresh site, with Mysites, and the User Profile Service running. The UPS is ran under a separate account, and the farm account has securityAdmin rights and directory replication rights.
When I enter Manage User Properties, I get a complete list of properties but no way to edit them, the same happens when I go into User Profile Properties, there is no where to edit the users. Has anyone seen this before and if so what step have I missed
in setting the UPS and MySites Up.
Both Administrator and Farm Admin have Administrator rights to the UPS Application, and it's the Profile User Service that's running at the minute not the Profile User Synchronization Service.
Any help would be appreciated.
Thanks
DavidThanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David -
Customizing View in Manage User Profiles page in CA
Is there a way to add additional fields to the Manage User Profiles section in Central Administration? It is defaulted to Account Name, Preferred Name, and Email. I would like to add one of my custom columns front an center so that when I search for someone
I see that custom field up front.
Thanks,
BrandonIt is possible. Please refer to:
http://technet.microsoft.com/en-us/library/cc262327(v=office.14).aspx#create
Just like any other custom search property you could use for User profiles too:
http://blogs.technet.com/b/meamcs/archive/2010/12/23/using-a-custom-user-profile-property-for-people-search-results-scopes.aspx
If you are using Term sets:
http://www.sharepointsteve.com/2010/10/making-custom-user-profile-properties-searchable-in-sharepoint-2010/ -
JANZ User Properties in SOA Suite 11G
Hi All,
I am trying to configure users in Oracle SOA Suite 11G to JANZ Realm . I am able to add user.
In documentation i see user property file present in this location "SOA_Oracle_Home\bpel\system\services\config\demo-users-properties.xml " , I don't have BPEL folder in SOA_SERVER1 , File available in 10G not in 11G.
Basically i am looking to set Manager to users which i define.
Users which i add in admin console are stored in WebLogin Embeded LDAP Server. I am able to see list of user by connecting server using LDAP Browser.
When i try to add manager attribute using LDAP Browser , it fails , record is not displayed in Jdeveloper .
Appreciate if your help in finding user properties or setting Manager role to the user. How can i add more attributes defined in documentation.
Regards
VijayHi Siva,
I don't think still there is any support for PGP in Oracle SOA. You may use java for PGP encryption/decryption and transfer externally encoded messages over SFTP.
Please refer -
Re: PGP Encryption/Decryption
PGP Encryption in B2B
Regards,
Anuj -
User Properties - Missing ZENworks tab
I am very new to Novell environments and am trying my best to follow directions, KB articles, support forum suggestions, etc... Perhaps this is a problem with our installation procedures, but I have been unable to locate the cause/fix for this problem to date.
We are running a Novell OES, NetWare 6.5, version 5.70.07 server. We also have C1 installed on the server, v 1.3.6h.
When I view the properties page for a user under NDS>TREE>CONTEXT, I am expecting to see a ZENworks tab with a Launcher Configuration page, but it's not there. I have installed ZENworks Desktop Management v7 SP1 Release 2, and the associated Desktop Management Services. I have extended the schema. But I still don't see this tab in the User Properties window.
I can only assume that I have missed a step somewhere, or have not configured something properly, but don't know where to begin researching this issue. If someone could just point me in the right direction, I would be more than happy to do the research on my own.
I should also note that I have registered for a Novell course 3080 so I can be brought up to speed on the basics of NetWare 6.5 and OES, but it doesn't start until next week. This missing tab is somewhat of a time-sensitive matter, so any help would be greatly appreciated. Thank you!Most Likely you need to download and install the latest ZDM Plugins for
ZCM on your local copy of C1.
On 1/29/2010 2:46 PM, libby steven wrote:
>
> I am very new to Novell environments and am trying my best to follow
> directions, KB articles, support forum suggestions, etc... Perhaps this
> is a problem with our installation procedures, but I have been unable to
> locate the cause/fix for this problem to date.
> We are running a Novell OES, NetWare 6.5, version 5.70.07 server. We
> also have C1 installed on the server, v 1.3.6h.
> When I view the properties page for a user under NDS>TREE>CONTEXT, I am
> expecting to see a ZENworks tab with a Launcher Configuration page, but
> it's not there. I have installed ZENworks Desktop Management v7 SP1
> Release 2, and the associated Desktop Management Services. I have
> extended the schema. But I still don't see this tab in the User
> Properties window.
> I can only assume that I have missed a step somewhere, or have not
> configured something properly, but don't know where to begin researching
> this issue. If someone could just point me in the right direction, I
> would be more than happy to do the research on my own.
> I should also note that I have registered for a Novell course 3080 so I
> can be brought up to speed on the basics of NetWare 6.5 and OES, but it
> doesn't start until next week. This missing tab is somewhat of a
> time-sensitive matter, so any help would be greatly appreciated. Thank
> you!
>
> -
Is there a way to change user properties assigned to nodes during runtime. For example, I have a user property 'Tooltip' assigned to few nodes and I display it using a UI element. I want to change this property based on selection of the options. Is this possible using a rule (CX or otherwise)? Thanks.
Biju --
Endorsing Jason's suggestion...a dynamic User String Property is definitely the way to go here. Your CX will initialize, for example, UserStr01 to be the "Tooltip" User Property value on each node that has that Property. Your CX will also be responsible for managing how UserStr01 should change as the configuration changes. You may then use UserStr01 as the 'Rollover Text Source' in the UI Content Template that's being used to display your Options.
Eogan -
Exposing User properties in remote portlet?
I am somewhat familiar in firing methods and such with the EDK's. But exposing some of the user meta data (i.e. Email, Title, etc) is proving to be more difficult. Any help in the right direction?
vr, RichJudging by the fact that you want Email, Title etc, I'd say you want User Info settings, not user properties (the former are user settings while the latter are objects themselves associated with the user).
In VB:
DimptContextAsPlumtree.Remote.Portlet.IPortletContextDimptRequestAsPlumtree.Remote.Portlet.IPortletRequestptContext= Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(Request, Response)ptRequest= ptContext.GetRequest()DimvalueAsStringvalue= ptRequest.GetSettingValue(Plumtree.Remote.Portlet.SettingType.UserInfo, "Title")
Make sure that user info settings you are interested in are selected in the User Information section for your web service and note their mapped name in the User Profile Manager.
Ruslan. -
How to manage users centally in OEM
Hi All,
I am using OEM 12.1.0.1.0, I want to manage users centrally. Actually what I want is I may create user in my external LDAP and the created users appears in OEM also which I can use for say notification purpose. I want every property of the user defined in external LDAP like.. email address etc to get appeared in OEM. Here I am using embedded LDAP which comes by default with WebLogic server. Can anyone suggest me the correct steps to achieve this.
Thanks in Advance!!
Edited by: Roshni Shankar on Nov 25, 2012 10:00 PMHi Roshni,
Have you read the Enterprise Manager 12c documentation on Security configuration? http://docs.oracle.com/cd/E24628_01/doc.121/e24473/security.htm#BABGAGIJ
It lists the steps to set up users with external authentication such as LDAP. I don't know if additional user properties such as email will appear in EM though.
I am working on something similar but using AD authentication instead. -
Filer using user properties in DIAdem
I added to my channels some user properties which values clarify the context of different channels, saving all channels in different TDM files. Working woth data loaded in the Data Portal or selecting dat for loading I would like to view / compare /process data with specific values of user properties. How can I filter my channels using User Properties content ?
Thanks
Luca
Solved!
Go to Solution.Hello Luca,
This should be pretty easy.
In the NAVIGATOR, selected the"Advanced Search" button (little blue icon on the top right side of the NAVIGATOR Window).
Build the query based on your customer property (in your case a Channel property) in the query builder. If you have numeric properties, you can use ">" "<" ">=" "<=" and "=" for your queries. Queries can be connected with AND or OR, it should be pretty straight forward from there.
Let us know if you have any additional questions. If you do, it always helps to share your version of DIAdem and a few data files if you can.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
Hello,
I have created users to assign user tasks.
This were the steps I did:
application server -> OC4J_BPEL -> administration -> security.
I have added a group and four users.
Questions:
1) Is this the right way to do it?!
2) Where do I configure user properties? Title, E-mail address phone number and so on? Do I have to do it in flow? Can I do it in the OC4j_BPEL?
3) do I need Identity management installed?
Thanks
Gonçalo RibeiroHello,
I have found the user-properties.xml in oraHome/integration/orabpel/system/services/config/
I have created a new entry with a user that already had been created by me.
Questions:
1) Do I have to edit the file add a new entry manually?
2) the user has to be previous created in the OC4J like I explained in the previous post?
Thanks
Gonçalo Ribeiro -
Ger-AD user properties and present them in different titled headers
I want to present the AD-user properties as headers under different titles, how do i change that as in my codefor the properties highlighted in bold.Get-ADGroup -Filter * -Properties * | ForEach-Object {
$Group = $_
Get-ADGroupMember $Group |
Where-Object { $_.objectClass -eq 'user'} |
Get-ADUser -Properties * | Select-Object FullName, SamAccountName, Disp*, DistinguishedName, @{
Name = 'Group Name'
Expression = { $Group.Name }
Name = 'Type'
Expression = { $Group.GroupCategory }
Name = 'Managed By'
Expression = { $Group.ManagedBy }I have just tried that but it throws an error: "Missing expression after ','."
Get-ADGroup -Filter * -Properties * | ForEach-Object {
$Group = $_
Get-ADGroupMember $Group |
Where-Object { $_.objectClass -eq 'user'} |
Get-ADUser -Properties * | Select-Object @{Name = 'Name' , Expression = $_.FullName}|, @{Name = 'Username' ; Expression = $_.SamAccountName}, Disp*, DistinguishedName, @{
Name = 'Group Name'
Expression = { $Group.Name }
Name = 'Type'
Expression = { $Group.GroupCategory }
Name = 'Managed By'
Expression = { $Group.ManagedBy } -
How can I use Windows IAS to validate WLC management users?
I am having a problem using my Windows IAS radius server to validate management users for my 2112 Wireless Lan Controller.
I have defined the radius server and it works ok with the policy for validating wireless clients but not for WLC management users.
The Remote access policy seems to be set up correctly as the event viewer on the server shows:-
Event Type: Information
Event Source: IAS
Event Category: None
Event ID: 1
Date: 09/02/2011
Time: 11:06:06
User: N/A
Computer: UK01DC07
Description:
User xxxxxx was granted access.
Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxx
NAS-IP-Address = 10.10.45.210
NAS-Identifier = UK03NM01
Client-Friendly-Name = UK03NM01
Client-IP-Address = 10.10.45.210
Calling-Station-Identifier = <not present>
NAS-Port-Type = <not present>
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = UK03NM01 - login
Authentication-Type = PAP
EAP-Type = <undetermined>
But, the WLC log shows:
*Feb 09 11:06:06.612: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed. User:xxxxxx. Service-Type is not present or it doesn't allow READ/WRITE permission..
The WLC just returns the login screen
Any thoughts?
Thanks in advance
RichardEvent viewer shows :
Event Type: Information
Event Source: IAS
Event Category: None
Event ID: 1
Date: 10/02/2011
Time: 08:49:39
User: N/A
Computer: UK01DC07
Description:
User xxxxxxxx was granted access.
Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx
NAS-IP-Address = 10.10.45.210
NAS-Identifier = UK03NM01
Client-Friendly-Name = UK03NM01
Client-IP-Address = 10.10.45.210
Calling-Station-Identifier =
NAS-Port-Type =
NAS-Port =
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server =
Policy-Name = UK03NM01 - login
Authentication-Type = PAP
EAP-Type =
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 ....
and IAS log shows:
"UK01DC07","IAS",02/10/2011,08:49:39,1,"xxxxxxxx","TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx",,,,,"UK03NM01","10.10.45.210",,0,"10.10.45.210","UK03NM01",,,,,,7,1,"UK03NM01 - login",0,"311 1 10.10.45.254 12/04/2010 23:56:59 1987",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Use Windows authentication for all users",1,,,,
"UK01DC07","IAS",02/10/2011,08:49:39,2,,"TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx",,,,,,,,0,"10.10.45.210","UK03NM01",,,,,,2,1,"UK03NM01 - login",0,"311 1 10.10.45.254 12/04/2010 23:56:59 1987",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Use Windows authentication for all users",1,,,,
It appears to me that IAS checks and passes the username/password as being valid but this response is ignored by the WLC
Richard -
Not able to figure out the table index for Edit table User Properties Dialo
Studio Edition Version 11.1.1.0.0
Build JDEVADF_MAIN.D5PRIME_GENERIC_080403.0915.4920
I'm trying to automate the various features in Jdeveloper dialogs. At one point I got struck with table in Edit Table Dialog.
Right Click on New -> Database Tier-> Select APPS: Import to offline database Objects. Step 1- Step5 dialogs comes up. Click on Next till finish button comes up. After that one table along with xdf file will be shown in the Jdeveloper Tree Menu. Right click on Table, Go to Properties. Then Select User Properties in the Left Pane. On Right Side table will be shown. I want to know what is the index for this table and also I need to input certain text and select some drop downs from this table.
Automation Tool: JFCUnit
Could you please tell how can I put values in some of the fields and select the values from the drop downs.
Kindly let me know if you need any more Information for the same.Hi,
if you are from Oracle, please use an internal forum. If not, the JDeveloper 11 forum is at: JDeveloper and OC4J 11g Technology Preview
Frank -
How can HelpDesk manage users in multiple Organizations in OIM R2
Hi All,
I looking to satisfy a requirement for OIM 11g R2 where a helpdesk administrator can only manage users that belong to a particular institution. However, there are approximately 50% of users that belong to more than one institution, where helpdesk staff from each institution should be able to manage the user. Customer is currently
doing this in Waveset by assigning users to orgs dynamically through rules which allows multiple virtual orgs. OIM unfortunately has no way to assign a user to multiple orgs, making OOTB authorization management very difficult.
How can a administrators from different org manage same User. If that user belongs to different org?
How to achieve this in OIM R2?
Thanks
AkshatHi Adr,
I know the OIM Authorization is around the Organization, and a user can present in only one org in OIM.
I wanted to know, can we force the authorization based on Department/Institutions rather than Org. I am thinking in reagards of OES Authorization policies.
OIM unfortunately has no way to assign a user to multiple orgs, making OOTB authorization management slightly difficult.
I am looking to determine the best approach to accommodate this requirement. Due to the high number of users that reside within multiple institutions, leveraging organizations will not work. Asa far i know OES APM should be able to accommodate this, but could not find any solid guidance in the Oracle training or Oracle by Example documentation.
Any thoughts?
-Ak -
Error when trying to Manage 'User Profile Service Application'
Hello,
I'm recently facing an issue two issues
1. User Profile Service Application: when I goto manage user profile service application I get an error windows and when I look into the logs following is the error with given correlation id "ef9fb09c-ae28-1072-b404-c887d61ed915"
08/21/2014 09:07:27.53 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://gcdwinamzanl002:8081/_layouts/15/ManageUserProfileServiceApplication.aspx?ApplicationID=9826b245%2D1d65%2D408f%2Db252%2D058b3809225f) ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.75 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
General 6t8h High [Forced due to logging gap, cached @ 08/21/2014 09:07:27.50, Original
Level: Verbose] {0} ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.75 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process
identity ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.75 w3wp.exe (0x2BB8) 0x2448 Web Content Management
Publishing Cache f6s5 Medium ObjectCache size is set to 100 megs. ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.75 w3wp.exe (0x2BB8) 0x2448 Web Content Management
Publishing 8zug Medium PublishingHttpModule.Init() calling AppDomainUnloadListener.Register() ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.75 w3wp.exe (0x2BB8) 0x2448 Web Content Management
Publishing 8x0a Medium AppDomainUnloadListener.RegisterSelf() entered lock(this=38386177) ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.75 w3wp.exe (0x2BB8) 0x2448 Web Content Management
Publishing 8x0b Medium AppDomainUnloadListener.RegisterSelf() about to call HostingEnvironment.RegisterObject(this=38386177) ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.82 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Asp Runtime aj1kp High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.88 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
General 6t8h High [Forced due to logging gap, cached @ 08/21/2014 09:07:27.83, Original
Level: Verbose] {0} ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.88 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process
identity ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.91 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://gcdwinamzanl002:8081/_layouts/15/ManageUserProfileServiceApplication.aspx?ApplicationID=9826b245%2D1d65%2D408f%2Db252%2D058b3809225f)).
Execution Time=427.452048 ef9fb09c-ae28-1072-b404-c887d61ed915
08/21/2014 09:07:27.98 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:http://gcdwinamzanl002:8081/_layouts/15/ManageUserProfileServiceApplication.aspx?ApplicationID=9826b245%2D1d65%2D408f%2Db252%2D058b3809225f)).
Parent No
08/21/2014 09:07:27.98 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://gcdwinamzanl002:8081/_layouts/15/ManageUserProfileServiceApplication.aspx?ApplicationID=9826b245%2D1d65%2D408f%2Db252%2D058b3809225f) ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.35 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
General 6t8h High [Forced due to logging gap, cached @ 08/21/2014 09:07:27.98, Original
Level: Verbose] {0} ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.35 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.39 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (PostAuthenticateRequestHandler). Execution Time=27.712976 ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.49 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Monitoring nass High [Forced due to logging gap, cached @ 08/21/2014 09:07:28.39, Original Level: Verbose]
____{0}={1} ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.49 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Asp Runtime aj1kr High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PostAuthorizeRequestHandler ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.68 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (PublishingHttpModule: PostAuthorizeRequestHandler). Execution
Time=178.76496 ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.85 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Asp Runtime aj1km High [Forced due to logging gap, cached @ 08/21/2014 09:07:28.72, Original Level: Verbose]
SPRequestModule.PostResolveRequestCacheHandler ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.85 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Asp Runtime aj1kn High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.AcquireRequestStateHandler ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.88 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Logging Correlation Data xmnv Medium Site=/ ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.94 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Database ahjqp High [Forced due to logging gap, cached @ 08/21/2014 09:07:28.90, Original
Level: Verbose] SQL connection time: 0.050592 ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:28.94 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process
identity ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.22 OWSTIMER.EXE (0x0968) 0x3744 SharePoint Foundation Monitoring
aeh57 Medium Sql Ring buffer status eventsPerSec = ,processingTime=0,totalEventsProcessed=0,eventCount=0,droppedCount=0,memoryUsed=0
08/21/2014 09:07:29.53 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Database ahjqp High [Forced due to logging gap, cached @ 08/21/2014 09:07:28.95, Original
Level: Verbose] SQL connection time: 0.027536 ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.53 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
General 6t8b High [Forced due to logging gap, Original Level: Verbose] Looking up {0}
site {1} in the farm {2} ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.59 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology umbj High [Forced due to logging gap, cached @ 08/21/2014 09:07:29.54, Original
Level: Verbose] Deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.59 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, Original Level: Verbose] Completed deserializing
the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.65 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, cached @ 08/21/2014 09:07:29.64, Original
Level: Verbose] Completed deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.65 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology umbj High [Forced due to logging gap, Original Level: Verbose] Deserializing the
type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.71 w3wp.exe (0x2BB8) 0x2448
0x6FB700D ahg9p High [Forced due to logging gap, cached @ 08/21/2014 09:07:29.68, Original Level:
Verbose] Completed deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.71 w3wp.exe (0x2BB8) 0x2448 Access Services
Administration ackn7 High [Forced due to logging gap, Original Level: Verbose] Tried to obtain setting {0} from Conversion Service
Application, but it didn't exist. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.80 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology umbj High [Forced due to logging gap, cached @ 08/21/2014 09:07:29.76, Original
Level: Verbose] Deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.80 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, Original Level: Verbose] Completed deserializing
the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.86 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, cached @ 08/21/2014 09:07:29.85, Original
Level: Verbose] Completed deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.86 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology umbj High [Forced due to logging gap, Original Level: Verbose] Deserializing the
type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.91 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, Original Level: Verbose] Completed deserializing
the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.96 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology umbj High [Forced due to logging gap, cached @ 08/21/2014 09:07:29.91, Original
Level: Verbose] Deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:29.96 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, Original Level: Verbose] Completed deserializing
the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.06 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology umbj High [Forced due to logging gap, cached @ 08/21/2014 09:07:30.01, Original
Level: Verbose] Deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.06 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, Original Level: Verbose] Completed deserializing
the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.12 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology ahg9p High [Forced due to logging gap, cached @ 08/21/2014 09:07:30.11, Original
Level: Verbose] Completed deserializing the type named {0} and with id {1}. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.12 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Configuration a16e High SPAce PrincipalName found account renamed to NULL SID. Using new name. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.12 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Configuration a16e High SPAce PrincipalName found account renamed to NULL SID. Using new name. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.14 w3wp.exe (0x2BB8) 0x2448 SharePoint Server
General ahjnd Medium Constructed a new async cache named Profile Property Cache ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.15 w3wp.exe (0x2BB8) 0x2448 SharePoint Portal Server User
Profiles ajk4d Medium UserProfileProperty_WCFLogging::Begin ProfilePropertyServiceClient.ExecuteOnChannel ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.15 w3wp.exe (0x2BB8) 0x2448 SharePoint Portal Server User
Profiles ajk35 Medium MossClientBase_WCFLogging::Begin MossClientBase.ExecuteOnChannel ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:30.18 w3wp.exe (0x2BB8) 0x2448 SharePoint Portal Server User
Profiles ajk36 Medium MossClientBase_WCFLogging:: MossClientBase.ExecuteOnChannel - Executing codeblock on channel ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:31.27 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Claims Authentication aeax6 High [Forced due to logging gap, Original Level: Verbose] SPSecurityContext: The SecurityTokenServiceBehavior is attached to the AsymmetricTrustChannel. ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:31.94 w3wp.exe (0x2BB8) 0x2448 SharePoint Foundation
Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc/actas'
Channel: 'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:3c1f10be-67f6-4335-9245-0af94c65f814' ef9fb09c-fe46-1072-b404-c5bccdc9dc59
08/21/2014 09:07:34.09 NodeRunnerContent1-ac7a63c6-80a (0x1A00) 0x32DC Search Search Platform Services
ajhlg Medium NerioCluster : Got valid (Primary) lease until 2014-08-21T09:10:11.0915676Z/0 for net.tcp://gcdwinamzanl002/C62BA9/AdminComponent1/Services/InvokerService
08/21/2014 09:07:34.29 OWSTIMER.EXE (0x0968) 0x3744 SharePoint Foundation Monitoring
aeh57 Medium Sql Ring buffer status eventsPerSec = ,processingTime=0,totalEventsProcessed=0,eventCount=0,droppedCount=0,memoryUsed=0
08/21/2014 09:07:35.72 w3wp.exe (0x0C0C) 0x18F0 SharePoint Foundation
Unified Logging Service b8fx High ULS Init Completed (w3wp.exe, onetnative.dll)
08/21/2014 09:07:35.86 w3wp.exe (0x0C0C) 0x18F0 SharePoint Foundation
Topology 2myf Medium Disabling the configuration filesystem and memory caches.
Abhishek MadanHi Abhishek,
According to your description, my understanding is that the User Profile Synchronization service stuck on ‘Starting’ or ‘Stopping’.
Please check whether you installed SQL 2012 Native Client (Pre-requisites) on SharePoint server. If yes, download and install SQL 2008 R2 Native Client from the below location:
http://download.microsoft.com/download/9/1/3/9138773A-505D-43E2-AC08-9A77E1E0490B/1033/x64/sqlncli.msi
From the SharePoint server ->control panel -> add/Remove programs , please confirm that the SQL 2008 Native Client is listed.
Make sure that the farm account is a member of the Administrators group on the server on which you are trying to start the User Profile Synchronization service, then restart the SharePoint Timer Service.
Set the FIM services to "Local System" before starting the service.
There is a troubleshooting for User Profile Synchronization Service start issues, please have a look at:
http://technet.microsoft.com/en-us/library/gg750257(v=office.14).aspx
Here are some similar posts for you to take a look at:
http://www.codeproject.com/Articles/358855/user-profile-synchronization-service-not-starting
http://www.sharepointdiary.com/2012/09/user-profile-synchronization-service-stuck-at-starting.html#ixzz2aX7Wz4GQ
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support
Maybe you are looking for
-
In-app purchase for single section of a publication?
Hi, there are a system to set an in-app purchase to every article of a magazine using "sections" option? or you must publish every article as a single issue? Thanks in advance for the answer. Claudio
-
Inbound idoc values when updated from user exit not saved
I'm trying to process some user exits of an inbound idoc from WE19. The values get correctly populated to IDOC_DATA internal tables of IDOC_INPUT_ORDRSP function module in debug kode but when the new idoc is generated from WE19 , those segment values
-
How to sync icalc with google calendar
Can anyone describe how to sync google calendar with iCal?
-
648 Max: HDD capacity only 2GB (should be 30 GB) in WinXP
Hi! I have a problem that seems to be related to my new 648 Max motherboard. Windows XP doesn't recognise the full capacity of my HDD. The HDD is about two years old (IBM Deskstar 75 GXP, 30.7 GB). Everything seems to be fine when i boot the computer
-
I have been working on a brochure in spanish and am running in to hyphenation issues where the lines are breaking 'improperly' for formal spanish. Is there a spanish language hyphenation plug in for Indesign CS3 that will adjust to a certain language