Managed mouse setting not applying on clients

Hi,
I am trying to add right-click functionality on the mac clients in a couple of my schools.
I have added the .plist file to the Workgroup Manager Preferences pane for the groups as always managed.
When I log on as a user and open Mouse Preferences the right side is set to secondary button (as I want it to be), but the mouse will not right-click. If I check in System Profiler under Managed Preferences, it shows up correctly also.
The only way it will right-click is if I go into Mouse Preferences and manually select secondary button.
Any suggestions?

Can the servers get the other policies from MP?
Juke Chou
TechNet Community Support

Similar Messages

2008 R2: Authorization Manager Permissions do not apply

I used authorization manager to modify the initialstore.xml.
I created a new role definition to allow techs to manage vms. Start, Stop, Reconfigure VMs. All View Options. and some more.
I created a new role assignment and added the the technician ad group
I closed the file.
Hyperv manager still shows you do not have required permission. contact the admin of the auth policy.
Am I missing a permission that they need or is the policy not applying to Hyper-v. The changes persist when I close and repopen the xml file.
We do use failover cluster and scvmm for this hyperv instance, if that matters.

It does matter if you use SCVMM.
SCVMM replaces the default authorization manager store with its own. (there was a bug at one time that the over-rode any modifications you made)
The SCVMM team runs with the concept that if you are using SCVMM, then you are doing all of your actions in SCVMM and SCVMM is thus vetting the permissions.
Also, most folks use HVRemote to set AuthMan properly.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Group policy Preference - Internet Option setting not applying

Hi,
I’m not very sure if any of you have encounter this strange issue when
configuring GPP -> Internet option setting for window 7 IE9 or IE11.
The following
are spec of OS and IE version used in my environment.
Window Server
2012 R2 (IE 10)
Window 7 (IE9
and IE11)
Recently I
have deployed proxy setting via GPP as I do not have IEM under my GPMC console.
Once the setting is been configured and deployed, I have notice that the GPO do
not apply after the user login. The following scenarios is what we observed.
1) User boot up the machine, Login and proxy setting will not applied
1a) gpupdate /force -> Proxy Settings applied
1b) setting will be removed after the GPO refreshed
2) User boot up the machine, Login and proxy setting will not apply
2a) User logoff and login proxy setting applied.
2b) Setting will be removed after the GPO refreshed
Kindy advise
if there is any solution to ensure that the setting apply whenever the user
login and stay intact even after the gpo refreshed by itself.

Hi,
>>1a) gpupdate /force -> Proxy Settings applied
>>1b) setting will be removed after the GPO refreshed
Based on the description, we can run command gpresult/h report.html to collect group policy result reports to compare how the settings are being applied.
Besides, have we installed the following hotfix on the computers with IE 9? If not, we can try to install the hotfix.
Internet Explorer Group Policy Preferences do not apply to Internet Explorer 9 in a Windows Server 2008 R2 domain environment
https://support.microsoft.com/en-us/kb/2530309?wa=wsignin1.0
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM 2012 R2/MDT 2012 - Deploying Windows 7 UDI CustomSetting.ini setting not applying

I am using an MDT UDI task sequence to deploy Windows 7. The task 'Apply Operating System Image' has the answer file package and unattend.xml file in the correct location.
Within the CustomSetting.ini I have the setting SkipProductKey=YES but, during the deployment it stops on the product key page.
We do not need to input a key since we are using KMS. I did not have this issue in 2007 although I did not use a UDI task sequence. I'm sure I am missing something or it's not using the CustomSetting.ini for some reason or another.

Hi,
Go to http://licensing.microsoft.com. You could download the windows 7 (KMS) Version ISO.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

New Proxy Setting Not Applying

We are applying a 2 part proxy GPO the computer part is applying but not the user part. We have unlinked and deleted the old policy from the OU but for some reason the old policy is still applying in the user policy. The only difference between the two
policy is the proxy info and the cert.
lipanitech | http://www.allamericancomputerrepair.com | A+,Network+,Linux+,Security+,MCTS,HP Pro

um...can't understand clearly...
-->We are applying a 2 part proxy GPO the computer part is applying but not the user part.
have enabled the loopback mode?
how you configure proxy setting? now, just old gpo still be applied? run gpresult, any clues?
Best,
Howtodo

"Make proxy settings per-machine (rather than per user)" Group Policy setting not applied until login as a local Administrator

We want to deploy to all our desktop the pac file to configure proxy. We have a Windows 2008 R2 server, and i've enabled the GPO "Make proxy settings per-machine (rather than per user)", and i've add a registry key AutoConfigURL in "HKLM\Software\Microsoft\Windows\Current
Version\Internet Settings" with the pac file link.
I've tested on my pc, and all was configured without any problem. I've try to login to my computer with another user (without admin rights) and the automatic configuration proxy was compiled and not modificable. It's seems that all works.
But, our users are not local admin, so i've tried to deploy the GPO in a collegue computer. I've forced the update of GPO, checked on registry that all new keys are added, and i've reboot the pc. When i've check on IE settings, autoconfig URL was empty and
grey. I'm disconnected from user and i've login to the pc with a local admin. With my surprise, the IE settings was compiled. When i'm come bac to the user profile the IE settings was compiled and not modificable.
The problem is: i've over 750 users in 3 countries, and i don't want grant them the local admin permissions. How can i configure proxy settings via GPO without login to every machine at least one time?

> have a Windows 2008 R2 server, and i've enabled the GPO "Make proxy
> settings per-machine (rather than per user)", and i've add a registry
> key AutoConfigURL in "HKLM\Software\Microsoft\Windows\Current
> Version\Internet Settings" with the pac file link.
In the past, we experienced various issues with machine proxy settings,
so we don't use them anymore. The simple approach:
Block access to the connections page through ADM template settings and
deploy the proxy through GPP Internet Settings.
This is what we do (with a pac file, too), and it works well :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

[solved][laptop-mode-tools] hard drive power settings not applied

I've used the laptop-mode-tools now for quite some time. However, recently the power management settings are not applied anymore. Possibly since updating to systemd...
My laptop-mode.conf looks as follows:
CONTROL_HD_POWERMGMT=1
# Power management for HD (hdparm -B values)
BATT_HD_POWERMGMT=254
LM_AC_HD_POWERMGMT=254
NOLM_AC_HD_POWERMGMT=254
However, even after doing a systemctl restart laptop-mode-tools.service I always get
$ sudo hdparm -B /dev/sda
/dev/sda:
APM_level = 96
Setting it manually works:
$ sudo hdparm -B 254 /dev/sda
/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254
$ sudo hdparm -B /dev/sda
/dev/sda:
APM_level = 254
Of course, the settings are lost upon rebooting in this case.
Any idea where the problem could be?
Last edited by rggjan (2012-10-08 12:25:04)

I apologize if it is bad style to answer to a post marked as [solved] but:
Same problem here!
HDParm-settings are not applied on boot by LMT.
laptop-mode.conf:
# Should laptop mode tools control the hard drive power management settings?
# Set to 0 to disable
CONTROL_HD_POWERMGMT="auto"
# Power management for HD (hdparm -B values)
BATT_HD_POWERMGMT=100
LM_AC_HD_POWERMGMT=200
NOLM_AC_HD_POWERMGMT=254
# hdparm -B /dev/sda
/dev/sda:
APM_level = 96
Any ideas or solutions on this so far?
And why is this post marked as 'solved'?
edit:
1.) manual set hdparm-settings survive reboot but not suspend!
2.) no difference between CONTROL_HD_POWERMGMT="auto" or "1"
3.)
# systemctl status laptop-mode
laptop-mode.service - Laptop Mode Tools
Loaded: loaded (/usr/lib/systemd/system/laptop-mode.service; enabled)
Active: active (exited) since Do 2013-01-24 14:05:20 CET; 8min ago
Process: 664 ExecStart=/usr/sbin/laptop_mode init auto (code=exited, status=0/SUCCESS)
4.) pointed out that this seems to be a bug: https://bugs.archlinux.org/task/33262 as systemd does not restore apm values on wake up.
Last edited by renegat (2013-03-09 11:01:42)

Windows Server 2012 GPO setting are not apply on windows Xp clients

Hi
I am create GPO on windows server 2012. 300 clients on domain are working fine, GPO setting apply on all windows 7, 8 clients. But 200 clients of windows XP are not working. GPO setting are not applies on XP. I am trying to Group Policy
Preference Client Side Extensions for Windows XP (KB943729) on one window XP client, all GPO servers 2012 setting is working fine. But is not solution. I have 200 clients of windows XP, Please provide batter solution on one click command and apply all 200
XP clients.
Thanks.

Dear,
I have Windows server 2012 , i have install ADDS with Forest functional level 2008 & Domain functional level 2008 .
I have applied GPO to particular OU, when i login to domain user on Windows 7 PC all GPO working fine but when i login on Windows Xp SP3 PC its not applied on XP.
I am facing issue on windows XP clients it is true. Please see this URL address:
http://blogs.technet.com/b/grouppolicy/archive/2009/03/27/group-policy-preferences-not-applying-on-some-clients-client-side-extension-xmllite.aspx
Please provide batter solution on one click command
Thanks.

Default Domain Policy Not Applying Settings to Servers or Clients

I have 2008 R2 DC's with a functioning level of 2003. Our domain servers are a mix of 2003, 2008, 2008 R2, and 2012 and our clients are a mix of Windows 7 Pro and Windows 8.1 Pro.
I recently made a change to the Default Domain Policy located at Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> Security Options
For the Security Policy setting called: Network security: Configure encryption types allowed for Kerberos
The change was to enable DES because of a specific need that I have with an application that I work with but enabling DES and leaving the other options such AES unselected caused other applications to not work right. I decided to revert the changes
back to "Not Defined" but those changes did not reflect on the servers even after running the gpupdate /force command.
In order to keep the application working that broke, we enabled all of the encryption levels such as DES, AES, etc. on the server that's running the application via it's Local Security Policy as a temporary fix.
Now, I want to make sure all servers receive the settings from the Default Domain Policy and have their Local Security Policies reflect the "Not Defined" setting but it's not applying. It seems like they worked when I first applied them but
when I try to remove them it does not work.
If I change the setting directly on the Local Security Policy on the server or clients it shows "No minimum" instead of "Not Defined" which I've heard can be fixed by identifying the registry entry for that setting and deleting it...so
help with the location and how to identify that key would also be helpful.
My goal is not to manually have to change servers and clients to revert back to their default settings...I want the Domain policy to apply and override the servers and client's Local Security Policy.
Any help with this would be greatly appreciated and thank you in advance.

I have 2008 R2 DC's with a functioning level of 2003. Our domain servers are a mix of 2003, 2008, 2008 R2, and 2012 and our clients are a mix of Windows 7 Pro and Windows 8.1 Pro.
I recently made a change to the Default Domain Policy located at Computer Configuration -> Policies -> Windows Settings -> Security Settings -> Local Policies -> Security Options
For the Security Policy setting called: Network security: Configure encryption types allowed for Kerberos
refer:
http://technet.microsoft.com/en-us/library/jj852180(v=ws.10).aspx
We needed to implement a similar scenario a few years ago (when we introduced Windows7 into our estate).
We had an SAP/NetWeaver implementation which always worked on WinXP, but failed on Win7.
We had to enable the DES ciphers, since those were disabled by default in Win7. We discovered that we also needed to enable all the other ciphers (those which are enabled by default[not configured]).
i.e., when we changed the setting from "Not Configured", enabled DES, and left the RC4/AES stuff untouched by us, the RC4/AES stuff attracted a status of disabled.
So, we had to set the DES ciphers to Enabled, and, also set the RC4/AES ciphers to Enabled - this gave us the "resultant" enablement of the default stuff and the needed change/addition of DES.
When you set a GP setting "back to Not Configured", depending upon the setting *AND* the individual Windows feature itself - one of two things will happen:
a) the feature will "revert" to default behaviour
b) the feature will retain the current configured behaviour but becomes un-managed
In classic Group Policy terms, condition (b) above is often referred to as "tattooing", i.e., the last GP setting remains in effect even though GPMC/RSOP/etc does not reveal that to be the case.
(This is also a really good example of not doing this sort of stuff in the DDP. It could have borked your whole domain :)
What I'd suggest, is that you re-enable your ciphers for KRB settings again - this time, enable all the ciphers that would normally be "default", let that replicate around, and allow time for domain members to action it.
Then, set the setting back to Not Configured. This way, the "last" settings issued by GP will be those you want to remain as the "legacy".
Note: the GP settings reference s/sheet, has this to say:
Network security: Configure encryption types allowed for Kerberos
This policy setting allows you to set the encryption types that Kerberos is allowed to use.
If not selected, the encryption type will not be allowed. This setting may affect compatibility with client computers or services and applications. Multiple selections are permitted.
This policy is supported on at least Windows 7 or Windows Server 2008 R2.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

AppV 5.0 SP2 HF4 - Registry not applying when set via DynamicConfig.xml

I have an AppV 5.0 package of VMWare and have tweaked the dynamicconfig.xml file to add a registry key. I am applying the package with the AppV 5.0 management and publishing server globally. This is what my dynamicconfig.xml looks like, pulled
from the C:\ProgramData\Microsoft... folder (my apologies if it doesn't format well, it does validate):
<?xml version="1.0"?>
<DeploymentConfiguration PackageId="7817a78f-feed-4070-8be5-
<Registry Enabled="true">
<Include>
<Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\VMware\VMware Infrastructure Client\Preferences">
<Value Type="REG_SZ" Name="RecentConnections" Data="wsvcenter20.healthy.bewell.ca,wsvcenter01.healthy.bewell.ca,wsvcenter40.healthy.bewell.ca,wsvcenteribm01.healthy.bewell.ca">
</Value>
</Key>
<Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\Foo"><Value Type="REG_SZ" Name="Bar" Data="NewValue"></Value></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\EmptyKey">
</Key>
</Include>
</Registry>
<FileSystem Enabled="true">
</UserConfiguration>
<MachineConfiguration>
<ProductSourceURLOptOut Enabled="true"> </ProductSourceURLOptOut>
<Subsystems>
<Registry>
<Include>
<Key Path="\REGISTRY\Machine\Software\Foo"><Value Type="REG_SZ" Name="Bar" Data="Baz">
</Value>
</Key>
<Key Path="\REGISTRY\Machine\Software\EmptyKey">
</Key>
</Include>
</Registry>
</Subsystems>
</MachineConfiguration>
</DeploymentConfiguration>
I left in the example Foo registry just to see if it works. When I launch vSphere I do not get all the drop downs in the "RecentConnection" keys, opening the AppV 5 package in cmd.exe with the /appvve switch and opening regedit shows the
registry keys with the sequenced application, but not the registry keys in the dynamic config.xml. I should also note I'm trying to replace existing keys that already have the "RecentConnection" that are in the manifest.xml. So I'm not
sure if "Include" is "Replace" and errors out if those keys already exist...? I don't see any errors in the event log. I'm not sure of any other way that the event log reports if dynamicconfig.xml is being applied.
Lastly, this is what my get-appvclientconfiguration looks like:
PS C:\Users\trententtye> Get-AppvClientConfiguration
Name Value
PackageInstallationRoot D:\AppVData\PackageInst...
PackageSourceRoot
LocationProvider
AutoLoad 2
EnablePackageScripts 1
ReestablishmentInterval 5
ReestablishmentRetries 3
CertFilterForClientSsl LOCAL_MACHINE\MY\1.3.6....
SupportBranchCache 0
VerifyCertificateRevoca... 1
SharedContentStoreMode 1
MigrationMode 1
RoamingFileExclusions
RoamingRegistryExclusions SOFTWARE\CLASSES
AllowHighCostLaunch 0
PackageStoreAccessControl 0
IntegrationRootUser %LOCALAPPDATA%\Microsof...
IntegrationRootGlobal %ALLUSERSPROFILE%\Micro...
VirtualizableExtensions exe,com,bat,cmd,vbs,ps1...
IgnoreLocationProvider 0
ReportingEnabled 0
ReportingStartTime
ReportingRandomDelay
ReportingInterval
ReportingServerURL
ReportingDataCacheLimit
ReportingDataBlockSize
ExperienceImprovementOptIn 0
EnablePublishingRefreshUI 0
ProcessesUsingVirtualCo... {%SystemRoot%\explorer....
EnableDynamicVirtualiza... 1
TLDR; My dynamicconfig.xml registry values are not applying. Help!

Hi Ral,
I did as you described, exporting my default config.xml and I can see my modification is present in the exported file.
<?xml version="1.0"?>
<DeploymentConfiguration PackageId="7817a78f-feed-4070-8be5-bdf9447a1539" DisplayName="vSphere_Client_50U3_51U2_55U1" xmlns="http://schemas.microsoft.com/appv/2010/deploymentconfiguration"><UserConfiguration><Subsystems><Shortcuts Enabled="true"><Extensions><Extension Category="AppV.Shortcut"><Shortcut><File>[{Desktop}]\MyApps\VMware\VMware vSphere Client.lnk</File><Target>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe</Target><Icon>[{Windows}]\Installer\{4CFB0494-2E96-4631-8364-538E2AA91324}\arpIcon.exe.0.ico</Icon><Arguments></Arguments><WorkingDirectory>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\</WorkingDirectory><ShowCommand>1</ShowCommand><ApplicationId>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe</ApplicationId></Shortcut></Extension><Extension Category="AppV.Shortcut"><Shortcut><File>[{Programs}]\MyApps\VMware\VMware vSphere Client.lnk</File><Target>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe</Target><Icon>[{Windows}]\Installer\{4CFB0494-2E96-4631-8364-538E2AA91324}\arpIcon.exe.0.ico</Icon><Arguments></Arguments><WorkingDirectory>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\</WorkingDirectory><ShowCommand>1</ShowCommand><ApplicationId>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe</ApplicationId></Shortcut></Extension></Extensions></Shortcuts><FileTypeAssociations Enabled="true"><Extensions></Extensions></FileTypeAssociations><URLProtocols Enabled="true"><Extensions><Extension Category="AppV.URLProtocol"><URLProtocol><Name>VpxClient</Name><ApplicationURLProtocol><Description>URL:VpxClient</Description><DefaultIcon>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe</DefaultIcon><ShellCommands><ShellCommand><ApplicationId>[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe</ApplicationId><Name>open</Name><CommandLine>"[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe" -e "%1"</CommandLine></ShellCommand></ShellCommands></ApplicationURLProtocol></URLProtocol></Extension></Extensions></URLProtocols><COM Mode="Isolated"><IntegratedCOMAttributes InProcessEnabled="false" OutOfProcessEnabled="true"></IntegratedCOMAttributes></COM><Objects Enabled="true"></Objects><Registry Enabled="true"><Include><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]"></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software"></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\EmptyKey"></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\Foo"><Value Type="REG_SZ" Name="Bar" Data="NewValue"></Value></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\VMware"></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\VMware\VMware Infrastructure Client"></Key><Key Path="\REGISTRY\USER\[{AppVCurrentUserSID}]\Software\VMware\VMware Infrastructure Client\Preferences"><Value Type="REG_SZ" Name="RecentConnections" Data="wsvcenter20.healthy.bewell.ca,wsvcenter01.healthy.bewell.ca,wsvcenter40.healthy.bewell.ca,wsvcenteribm01.healthy.bewell.ca"></Value></Key></Include></Registry><FileSystem Enabled="true"></FileSystem><Fonts Enabled="true"></Fonts><Services Enabled="true"></Services></Subsystems><Applications><Application Id="[{AppVPackageRoot}]\Virtual Infrastructure Client\Launcher\VpxClient.exe" Enabled="true"><VisualElements><Name>VMware vSphere Client</Name><Icon></Icon><Description></Description></VisualElements></Application></Applications><UserScripts></UserScripts></UserConfiguration><MachineConfiguration><ProductSourceURLOptOut Enabled="true"></ProductSourceURLOptOut><Subsystems><Registry></Registry></Subsystems><MachineScripts></MachineScripts><TerminateChildProcesses></TerminateChildProcesses></MachineConfiguration></DeploymentConfiguration>
but the registry value's still do not exist when I launch VPXClient.exe or open regedit.exe with the /appvve: command switch.

Managed proxy settings not being applied

I am currently having an issue with a certain managed preferences set in Workgroup manager.
Essentially, all machine preferences are applied by the clients (energy saver and such), except for network proxy settings and bypass domains.
Preferences are set on machine groups which my clients are members of, but the same happens if I set the same managed preferences on user accounts, also.
In each test I have done, an 'mcxquery' shows that the client has received the preferences, along with all the other settings I've applied and each time all of the preferences have applied except for the network proxy! Both the clients and the server have been re-installed from scratch, but the problem still persists.
Has anyone ever encountered anything similar? Does anyone have any suggestions on how I might get this working again?

Hi all,
I'm having exactly the same issue : most of the managed preferences being applied except proxy
I've checked with mcxquery : proxy settings are broadcasted, and I find the correct settings in the file /Library/Managed Preferences for the user, but when I check in Preferences/Network/Proxy, nothing appears ...
Any idea ?
Thanks,
PhC.

Profile Manager 3.1.2 home sync setting being ignored on client

Hey,
We currently have all of our Mac clients successfully home syncing with Server 2.2.2 and WGM but we would like to upgrade to the latest version and finally move over to Profile Manager.
I am currently trying to test Server 3.1.2 on a closed network with a couple of test clients.
Everything seems to be working as expected and all deployment settings are being correctly set on each client.
However the one thing that refuses to work on the client is the Home Sync settings that have been deployed.
I have Home Sync set to sync at logout and manually only.
On the client i can clearly see that the variable "syncBackgroundSetAtLogout" is set to "sync" within the com.apple.homeSync.plist file. However when I logout on either client I get no sync happening at all.
Manually syncing works fine but I need this logout sync setting to work as I do not wish to have to go to each client on our network and manually set the settings from the "mobile settings" pane in preferences.
Has anyone else come across this with 3.1.2 and maybe overcome it?
Thanks, Justin

Figured it out. I think it's just my interpretation of the sync settings that was the problem. For some reason you have to manage settings that you don't want managed and specify not to manage them. (?!)

Managed folder policy will not apply to entire database

Exch2007 sp3
I have run several versions of this pshell command trying to set a MRM policy for a specific Exch2007 database, but the policy is not getting applied…..the mailboxes don’t show the policy
Get-Mailbox -domaincontroller DC.domain.com | Where{$_.Database -eq "mail\sg1\private information store"} | Set-Mailbox -ManagedFolderMailboxPolicy "90day"
When I run this version, it returns info about a corrupted mailbox.
If this mailbox is what is stopping the cmd from completing, is there a parameter to skip bad mailboxes?
Thanks!

Hi,
What's the error/warning of that corrupted mailbox? Since it’s a corrupted mailbox, I suggest to disable this mailbox then run command to apply managed folder mailbox policy.
In addition, just set the policy on DB isn’t enough to see the effects in user’s Outlook. To do this we need to schedule the managed folder assistant to run on a mailbox server
For EMC:
“Server Configuration”->”Mailbox”->locate related mailbox role and right-click it->choose “Properties”
In the “Messaging Records Management” tab->set the running schedule
For EMS:
Start-ManagedFolderAssistant
https://technet.microsoft.com/en-us/library/bb691428%28EXCHG.80%29.aspx?f=255&MSPPError=-2147217396
Document for reference
Managing Messaging Records Management
https://technet.microsoft.com/en-us/library/bb123507(EXCHG.80).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

UDI wizard is not applying TimeZone setting (MDT2013)

Hi All,
I am working on MDT2013 to create Windows7-64bit Image for OEM vendor. Note:- I am not using any SQL database.
I have customized the UDIWizard_Config.xml where it should ask for UIlanguage, Inputlocale and Timezone. I am calling this UDI wizard xml in Tasksequence after gathering locally here the problem is after completing the build its not applying the Timezone
setting in image.
Any one aware about this issue? why UDI wizard is not applying the Timezone setting in image?
I have attached the below UDI wizard XML. please answer and ask if you require any more details..
<?xml version="1.0" encoding="UTF-8"?>
-<Wizard>
-<DLLs>
<DLL Name="OSDRefreshWizard.dll"/>
<DLL Name="SharedPages.dll"/>
</DLLs>
-<Style>
<Setter Property="bannerFilename">UDI_Wizard_Banner.bmp</Setter>
<Setter Property="title">Operating System Deployment (OSD) Wizard</Setter>
</Style>
-<Pages>
-<Page Name="WelcomePage" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
-<Fields>
-<Field Name="WelcomeText" Summary="" Enabled="true">
<Default> Welcome to the Deployment Wizard. This wizard will walk you through a series of screens that will allow you to choose Language type. Click on the 'Next' button to start your selected language pack installalation. Please allow 1 hours for installation. If you need support during this process, please e-mail your system administrator. </Default>
</Field>
</Fields>
</Page>
-<Page Name="ConfigScanPage" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
-<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
<Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
<Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
<Setter Property="readcfg">$LogPath$\OSDSetupWizard.xml.app</Setter>
<Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
<Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
<ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
<ExitCode Type="1" Text="One or more warnings were encountered (nonfatal) while running App Discovery. The appropriate applications may not be selected." Value="1" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Get Printers">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSD_GetPrinters.vbs /xmlout:%temp%\PrinterList.xml;$LogPath$\PrinterList.xml</Setter>
<Setter Property="BitmapFilename">images\Printers.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="1" Text="Output filename not specified correctly." Value="10" State="Warning"/>
<ExitCode Type="1" Text="Unable to create output file." Value="20" State="Warning"/>
<ExitCode Type="1" Text="An unknown error has occurred." Value="*" State="Warning"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="CheckSMSFolderOnUSB">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\CheckSMSFolderOnUSB.vbs</Setter>
<Setter Property="BitmapFilename">images\USB.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Please disconnect any USB Drives at this time, cancel the wizard, and start the task sequence over." Value="*" State="Error"/>
<Error Type="-1" Text="The path not found" Value="2" State="Error"/>
<Error Type="-1" Text="The file not found" Value="3" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
<Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Drive Encryption">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDBitlockerState.vbs %systemdrive%</Setter>
<Setter Property="BitmapFilename">images\bitlocker.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="1" Text="Drive is fully encrypted. Encryption will be paused during deployment and resumed." Value="1" State="Warning"/>
<ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="4" State="Warning"/>
<ExitCode Type="1" Text="Drive encryption is paused. Encryption will resume after deployment has completed." Value="5" State="Warning"/>
<ExitCode Type="-1" Text="Drive is currently encrypting. Please fully encrypt or pause encryption to continue." Value="2" State="Error"/>
<ExitCode Type="-1" Text="Drive is currently decrypting. Please fully decrypt or pause decryption to continue." Value="3" State="Error"/>
<ExitCode Type="-1" Text="A script error was detected. Please contact support to continue." Value="*" State="Error"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="ConfigScanBareMetal" Type="Microsoft.OSDRefresh.ConfigScanPage" DisplayName="Deployment Readiness">
-<Tasks StatusTitle="Status" NameTitle="Configuration Check Name">
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Check Windows Scripting Host">
<Setter Property="filename">%windir%\system32\cscript.exe</Setter>
<Setter Property="parameters">Preflight\OSDCheckWSH.vbs</Setter>
<Setter Property="BitmapFilename">images\WinScriptHost.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Windows Scripting Host not installed." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.SharedPages.WiredNetworkTask" DisplayName="Wired Network Check">
<Setter Property="BitmapFilename">images\WiredNetwork.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No Wired connection found. Please plug in to a network cable." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.ACPowerTask" DisplayName="AC Power Check">
<Setter Property="BitmapFilename">images\ACPower.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="No AC power detected. Please plug in to power." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.PrestageDriveLookupTask" DisplayName="OEMMedia Lookup">
<Setter Property="BitmapFilename"/>
-<ExitCodes>
<ExitCode Type="0" Text="Success" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Error" Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.OSDRefresh.AppDiscoveryTask" DisplayName="Application Discovery">
<Setter Property="readcfg">%OSDDataSourceDrive%\%OSDDataSourceDirectory%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="writecfg">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="log">$LogPath$\AppDiscovery.log</Setter>
<Setter Property="BitmapFilename">images\AppDiscovery.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="Successfully scanned applications." Value="0" State="Success"/>
<ExitCode Type="1" Text="Could not run application discovery engine (reason unknown). The appropriate applications may not be selected." Value="*" State="Warning"/>
<ExitCode Type="0" Text="AppDiscovery exited with success as Application matching information is not available in Windows PE." Value="1" State="Success"/>
<ExitCode Type="1" Text="Critical problems were encountered while initializing App Discovery. The appropriate applications may not be selected." Value="16777216" State="Warning"/>
<ExitCode Type="1" Text="Critical problems were encountered while processing the Application Master List. The appropriate applications may not be selected." Value="33554432" State="Warning"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="RebootPage" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
-<Fields>
-<Field Name="RebootText" Summary="" Enabled="true">
<Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
</Field>
</Fields>
</Page>
-<Page Name="WelcomePageReplace" Type="Microsoft.SharedPages.WelcomePage" DisplayName="Welcome">
-<Fields>
-<Field Name="WelcomeText" Summary="" Enabled="true">
<Default> Welcome to the Replace Wizard. This wizard will walk you through a series of screens that will allow you to customize your data and settings for USMT. After you have entered the information, the wizard will begin USMT. Click on the 'Next' button to start. Please allow 2 hours for USMT. If you need support during this process, please e-mail your system administrator. </Default>
</Field>
</Fields>
</Page>
-<Page Name="VolumePage" Type="Microsoft.OSDRefresh.VolumePage" DisplayName="Volume">
-<Fields>
<Field Name="Image" Summary="Image Selection:" Enabled="true" VarName="OSDImageIndex"/>
-<Field Name="Volume" Summary="Volume:" Enabled="true">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">There are no volumes available for installing the OS.</Setter>
</Validator>
</Field>
<Field Name="Directory" Summary="Windows Directory:" Enabled="true"/>
<Field Name="Format" Summary="Format:" Enabled="true" VarName="OSDDiskPart"/>
</Fields>
<Setter Property="MinimumVolumeSize">10</Setter>
<Setter Property="FormatWinPE">Partition and &format disk 0.</Setter>
<Setter Property="FormatFullOS">&Clean the selected volume.</Setter>
<Setter Property="FormatWinPEWarning">WARNING: Choosing this option will repartition and format disk 0!</Setter>
<Setter Property="FormatFullOSWarning">WARNING: Choosing this option will delete all data on the target volume!</Setter>
-<Data Name="ImageSelection">
-<DataItem>
<Setter Property="DisplayName">Windows 7 RTM (x86)</Setter>
<Setter Property="Index">1</Setter>
<Setter Property="Architecture">x86</Setter>
<Setter Property="ImageName">Windows 7 RTM Images</Setter>
</DataItem>
</Data>
</Page>
-<Page Name="UserRestorePage" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
-<Fields>
<RadioGroup Name="LocationGroup" Locked="false"/>
-<Field Name="TargetDrive" Enabled="true" VarName="">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
</Validator>
</Field>
-<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No valid network share.</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
<Field Name="NoDataRadio" Enabled="true" VarName=""/>
<Field Name="LocalRadio" Enabled="true" VarName=""/>
<Field Name="USBRadio" Enabled="true" VarName=""/>
<Field Name="NetworkRadio" Enabled="true" VarName=""/>
</Fields>
<Setter Property="NetworkPassword"/>
<Setter Property="NetworkUsername"/>
<Setter Property="DataSourceText">Please select a location where user data will be captured and/or restored.</Setter>
<Setter Property="Format">disable</Setter>
<Setter Property="FormatPrompt">disable</Setter>
<Setter Property="MinimumDriveSize">10</Setter>
<Setter Property="State">Restore</Setter>
<Setter Property="NetworkDrive">n:</Setter>
<Data Name="Network"/>
</Page>
-<Page Name="ComputerPage" Type="Microsoft.OSDRefresh.ComputerPage" DisplayName="New Computer Details">
-<Fields>
-<RadioGroup Name="DomainGroup" Locked="false">
<Default>Workgroup</Default>
</RadioGroup>
-<Field Name="ComputerName" Summary="Computer Name:" Enabled="true" VarName="OSDComputerName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The computer name is required. Please enter a computer name.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">The computer name is not valid. It either contains a character that isn't allowed, or is longer than 15 characters.</Setter>
<Setter Property="NamedPattern">ComputerName</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
<Setter Property="Message">One of the characters in the computer name is not valid.</Setter>
<Setter Property="InvalidChars"/>
</Validator>
</Field>
-<Field Name="DomainCombo" Enabled="true" VarName="OSDDomainName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You must select a domain.</Setter>
</Validator>
</Field>
<Field Name="DomainOUCombo" Enabled="true" VarName="OSDDomainOUName"/>
-<Field Name="WorkgroupName" Summary="Workgroup:" Enabled="true" VarName="OSDWorkgroupName">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">The workgroup name must be between 1 and 15 characters long, and cannot contain any of these characters: " : ; | = + * ? < ></Setter>
<Setter Property="NamedPattern">Workgroup</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="Join Domain Account:" Enabled="true" VarName="OSDJoinAccount">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDJoinPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
</Fields>
<Setter Property="ADCredentialCheck" Type="boolean">true</Setter>
<Setter Property="ADComputerObjectCheck" Type="boolean">true</Setter>
<Setter Property="UseExistingComputerName" Type="boolean">false</Setter>
<Data Name="Domain"/>
</Page>
-<Page Name="AdminAccounts" Type="Microsoft.SharedPages.AdminAccountsPage" DisplayName="Administrator Password">
-<Fields>
-<Field Name="Username" Summary="Add as Administrator:" Enabled="true" VarName="OSDAddAdmin">
<Default>%OSDJoinAccount%</Default>
-<Validator Type="Microsoft.Wizard.Validation.InvalidChars">
<Setter Property="Message">One of the characters in the Account Name(s) field is not valid.</Setter>
<Setter Property="InvalidChars">/[]:|=,+*<>?"</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDLocalAdminPassword">
<Default/>
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
</Fields>
</Page>
-<Page Name="UDAPage" Type="Microsoft.OSDRefresh.UDAPage" DisplayName="User Device Affinity">
-<Fields>
-<Field Name="DeviceAfinity" Summary="" Enabled="true">
<Default>false</Default>
</Field>
-<Field Name="Username" Summary="User Device Affinity Account:" Enabled="true" VarName="SMSTSUdaUsers">
<Default>%OSDJoinAccount%</Default>
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
<Field Name="Password" Enabled="true"/>
</Fields>
</Page>
-<Page Name="LanguagePage" Type="Microsoft.OSDRefresh.LanguagePage" DisplayName="Language">
-<Fields>
-<Field Name="LanguagePack" Summary="Language Pack:" Enabled="true" VarName="UILanguage">
<Default>DE-DE</Default>
</Field>
-<Field Name="InputLocale" Summary="Locale:" Enabled="true" VarName="UserLocale">
<Default>en-US</Default>
</Field>
-<Field Name="KeyboardLocale" Summary="Keyboard Locale:" Enabled="true" VarName="KeyboardLocale">
<Default>00000409</Default>
</Field>
-<Field Name="TimeZone" Summary="Time Zone:" Enabled="true" VarName="OSDTimeZone">
<Default>Pacific Standard Time</Default>
</Field>
</Fields>
-<Data Name="LanguagePacks">
-<DataItem>
<Setter Property="DisplayName">English (United States)</Setter>
<Setter Property="Language">EN-US</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Chinese (Hong Kong S.A.R.)</Setter>
<Setter Property="Language">ZH-HK</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">German (Germany)</Setter>
<Setter Property="Language">DE-DE</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Japanese (Japan)</Setter>
<Setter Property="Language">JA-JP</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Polish (Poland)</Setter>
<Setter Property="Language">PL-PL</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Romanian (Romania)</Setter>
<Setter Property="Language">RO-RO</Setter>
</DataItem>
</Data>
</Page>
-<Page Name="ApplicationPage" Type="Microsoft.OSDRefresh.ApplicationPage" DisplayName="Install Programs">
<Setter Property="Link.Uri">%temp%\AppDiscoveryresult.xml.app</Setter>
<Setter Property="TsAppBaseVariable">PACKAGES</Setter>
<Setter Property="TsApplicationBaseVariable">APPLICATIONS</Setter>
<Setter Property="TsWindowsAppPackageAppBaseVariable">WINDOWSAPPPACKAGEAPPS</Setter>
<Setter Property="TsAppInstall">AppInstall</Setter>
</Page>
<Page Name="SummaryPage" Type="Microsoft.Shared.SummaryPage" DisplayName="Summary"/>
-<Page Name="UserCapturePageOldPC" Type="Microsoft.OSDRefresh.UserStatePage" DisplayName="Select Target">
-<Fields>
<RadioGroup Name="LocationGroup" Locked="false"/>
-<Field Name="TargetDrive" Enabled="true" VarName="">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No target drive found. Please insert a valid USB drive and click the Refresh button.</Setter>
</Validator>
</Field>
-<Field Name="NetworkLocation" Enabled="true" VarName="SMSConnectNetworkFolderPath">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">No valid network share.</Setter>
</Validator>
</Field>
-<Field Name="Username" Summary="User:" Enabled="true" VarName="OSDUserStateKey">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">You have to input user name. Example is domain\user.</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">User name format is invalid. Example is domain\user.</Setter>
<Setter Property="Pattern">^([A-Za-z0-9-\.]+)\\([^+#,*"<>;=\[\]:?/|']+)$</Setter>
</Validator>
</Field>
-<Field Name="Password" Summary="" Enabled="true" VarName="OSDUserStateKeyPassword">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">Password is required. Please enter the password.</Setter>
</Validator>
</Field>
<Field Name="NoDataRadio" Enabled="false" VarName=""/>
<Field Name="LocalRadio" Enabled="false" VarName=""/>
<Field Name="USBRadio" Enabled="true" VarName=""/>
<Field Name="NetworkRadio" Enabled="true" VarName=""/>
</Fields>
<Setter Property="NetworkPassword"/>
<Setter Property="NetworkUsername"/>
<Setter Property="DataSourceText">Please select a location where user data will be captured.</Setter>
<Setter Property="Format">disable</Setter>
<Setter Property="FormatPrompt">disable</Setter>
<Setter Property="MinimumDriveSize">10</Setter>
<Setter Property="State">Capture</Setter>
<Setter Property="NetworkDrive">n:</Setter>
<Data Name="Network"/>
</Page>
-<Page Name="ProgressPage" Type="Microsoft.OSDRefresh.ProgressPage" DisplayName="Capture Data">
<Setter Property="LogFilename">$LogPath$\USMTcapture.prg</Setter>
-<Tasks StatusTitle="Status" NameTitle="Task Name">
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy AppDiscovery XML">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\AppDiscoveryresult.xml.app"/>
<Setter Property="BitmapFilename">images\copy.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
<Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy Printers XML">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\PrinterList.xml"/>
<Setter Property="BitmapFilename">images\Printers.ico</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.CopyFilesTask" DisplayName="Copy ProductsList">
<File Dest="$DriveLetter$\%OSDDataSourceDirectory%" Source="%temp%\ProductsInstalled.txt"/>
<Setter Property="BitmapFilename">images\copy.bmp</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="Copy failed." Value="*" State="Error"/>
<Error Type="-1" Text="Copy failed. Please check the OSD Wizard log file for details." Value="*" State="Error"/>
</ExitCodes>
</Task>
-<Task Type="Microsoft.Wizard.ShellExecuteTask" DisplayName="Run USMT">
<Setter Property="BitmapFilename">images\usmt.bmp</Setter>
<Setter Property="filename">%windir%\system32\wscript.exe</Setter>
<Setter Property="parameters">//B %ScriptRoot%\ZTIUserState.wsf /capture /OSDStateStorePath:$DriveLetter$\%OSDDataSourceDirectory% /UserDataKey:%OSDUserStateKeyPassword%</Setter>
-<ExitCodes>
<ExitCode Type="0" Text="" Value="0" State="Success"/>
<ExitCode Type="-1" Text="USMT scan state failed." Value="*" State="Error"/>
</ExitCodes>
</Task>
</Tasks>
</Page>
-<Page Name="RebootAfterCapture" Type="Microsoft.OSDRefresh.RebootPage" DisplayName="Reboot">
-<Fields>
-<Field Name="RebootText" Summary="" Enabled="true">
<Default> Your machine will now be rebooted. Click on the 'Finish' button to reboot. </Default>
</Field>
</Fields>
</Page>
-<Page Name="BitLocker" Type="Microsoft.OSDRefresh.BitLockerPage" DisplayName="BitLocker">
-<Fields>

-<RadioGroup Name="BitLockerRadioGroup" Locked="false">
<Default>TPMPIN</Default>
</RadioGroup>
-<RadioGroup Name="LocationGroup" Locked="false">
<Default>AD</Default>
</RadioGroup>
-<Field Name="BitLocker" Summary="" Enabled="true" VarName="BDEInstallSuppress">
<Default>True</Default>
</Field>
-<Field Name="PIN" Summary="" Enabled="true" VarName="BDEPIN">
-<Validator Type="Microsoft.Wizard.Validation.NonEmpty">
<Setter Property="Message">The PIN must not be emtpy</Setter>
</Validator>
-<Validator Type="Microsoft.Wizard.Validation.RegEx">
<Setter Property="Message">PIN should be a number between 4-20 digits</Setter>
<Setter Property="Pattern">^[0-9-]{4,20}$</Setter>
</Validator>
</Field>
-<Field Name="WaitForEncryption" Summary="" Enabled="true" VarName="OSDBitlockerWaitForEncryption">
<Default>True</Default>
</Field>
</Fields>
<Setter Property="KeyLocation"/>
</Page>
-<Page Name="Build Type" Type="Microsoft.Wizard.CustomPage" DisplayName="Build Type">
-<Fields>
-<Field Name="label3" Summary="" Enabled="true" VarName="">
<Default>Choose Language Type</Default>
</Field>
-<RadioGroup Name="Group1" Summary="ABBLan" Enabled="true" VarName="ABBLang" Locked="false">
<Default>radiobutton1</Default>
</RadioGroup>
-<Field Name="combo5" Summary="ABBLang" Enabled="true" VarName="ABBLang">
<Default>English</Default>
</Field>
</Fields>
-<Data Name="CustomFields">
-<DataItem>
<Setter Property="ControlType">label</Setter>
<Setter Property="ID">3</Setter>
<Setter Property="X">37.27</Setter>
<Setter Property="Y">3.67</Setter>
<Setter Property="Width">100</Setter>
<Setter Property="Height">12</Setter>
<Setter Property="Name">label3</Setter>
<Setter Property="Label">Choose Language Type</Setter>
</DataItem>
-<DataItem>
<Setter Property="ControlType">combo</Setter>
<Setter Property="ID">5</Setter>
<Setter Property="X">36.87</Setter>
<Setter Property="Y">21.25</Setter>
<Setter Property="Width">100</Setter>
<Setter Property="Height">12</Setter>
<Setter Property="Name">combo5</Setter>
</DataItem>
</Data>
-<Data Name="combo5">
-<DataItem>
<Setter Property="DisplayName">English</Setter>
<Setter Property="Value">0</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Chinese</Setter>
<Setter Property="Value">1</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Japanese</Setter>
<Setter Property="Value">2</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">German</Setter>
<Setter Property="Value">3</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-2</Setter>
<Setter Property="Value">4</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-3</Setter>
<Setter Property="Value">5</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-4</Setter>
<Setter Property="Value">6</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-5</Setter>
<Setter Property="Value">7</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-6</Setter>
<Setter Property="Value">8</Setter>
</DataItem>
-<DataItem>
<Setter Property="DisplayName">Lang-7</Setter>
<Setter Property="Value">9</Setter>
</DataItem>
</Data>
</Page>
</Pages>
-<StageGroups>
-<StageGroup DisplayName="New Computer">
-<Stage Name="NEWCOMPUTER" DisplayName="New Computer">
<PageRef Page="WelcomePage"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="SummaryPage"/>
</Stage>
-<Stage Name="NEWCOMPUTER.Prestaged" DisplayName="New Computer (prestaged media)">
<PageRef Page="WelcomePage"/>
<PageRef Page="BitLocker"/>
<PageRef Page="UserRestorePage"/>
<PageRef Page="ConfigScanBareMetal"/>
<PageRef Page="ComputerPage"/>
<PageRef Page="AdminAccounts"/>
<PageRef Page="UDAPage"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="ApplicationPage"/>
<PageRef Page="SummaryPage"/>
</Stage>
</StageGroup>
-<StageGroup DisplayName="Refresh">
-<Stage Name="REFRESH" DisplayName="Refresh">
<PageRef Page="WelcomePage"/>
<PageRef Page="VolumePage"/>
<PageRef Page="UserRestorePage"/>
<PageRef Page="ConfigScanPage"/>
<PageRef Page="ComputerPage"/>
<PageRef Page="AdminAccounts"/>
<PageRef Page="LanguagePage"/>
<PageRef Page="ApplicationPage"/>
<PageRef Page="SummaryPage"/>
</Stage>
</StageGroup>
-<StageGroup DisplayName="Replace">
-<Stage Name="REPLACE" DisplayName="Replace, in full OS">
<PageRef Page="WelcomePageReplace"/>
<PageRef Page="ConfigScanPage"/>
<PageRef Page="RebootPage"/>
</Stage>
-<Stage Name="REPLACE.WinPE" DisplayName="Replace, in WinPE">
<PageRef Page="UserCapturePageOldPC"/>
<PageRef Page="ProgressPage"/>
<PageRef Page="RebootAfterCapture"/>
</Stage>
</StageGroup>
</StageGroups>
</Wizard>

I don't know much about the UDI but I think the FieldName should be TimeZoneName and not just TimeZone.

Request set not getting picked up by concurrent manager.

Hi All
We have an issue today where the daily scheduled request set did not run and status for which remained at "Pending Scheduled". Concurrent Manager did not pick up this and status remained:
This request is waiting to be processed by the Conflict Resolution Manager.
This request cannot yet begin execution because other requests may conflict with it. The Conflict Resolution Manager will determine when this request may begin execution.
User <user_ name> submitted this request on 06-MAR-2011 23:17:33.
No action required. This is a normal condition.
This request may have to wait on one or more of the following requests to complete before it can begin execution:
I checked all the 'incompatibilities" of the programs for request set and none of them were running.
We did the below, but no success:
1. Restarted the concurret manager
2. Cancelled the scheduled run and submitted request set again.
Still the status remained at "Pending Scheduled" with above message.
When we tried to run the individaul programs for that request set it all worked fine. So I would like to know what could be the issue and how to overcome this. I think the issue could be with request set as the individual program is working fine.
Any pointers will be highly appriciated.
Many Thanks,
-Shashank

which manager is Processing that request.. if it is Custom manager Then U should excllude this concurrent program from the concurrent manager.
otherwise both the Standard manager or custom manager both are not going to pickup the process..
he
Please Check The Cocnurrent Manager which is going to process and check wether its included in the respective manager.
Thanks
Reddy
http://11iapps.wordpress.com

Managed mouse setting not applying on clients

Similar Messages

Maybe you are looking for