Managed Path Issue

Hi...While creating a member site getting Managed Path not found, even it exists ..
Ravindranath

That's a wildcard managed path, which means that anything under the
http://WebAppName/ManagedPath/ will need a name such as
http://WebAppName/ManagedPath/SiteCollectionName. These are used to allow you to create lots of site collections without adding too many managed paths.
If you wanted it to work as http://WebAppName/SiteCollectionName then you'd need to delete that managed path and re-create it as an explicit managed path. These are used to give site collections prettier
names but don't scale too well, 10 is best and 20 is the maximum recommended i believe.
For more information see here: http://www.sharepointdiary.com/2012/11/sharepoint-managed-paths-faqs.html

Similar Messages

Infopath publish and managed path issue

I have a manged path, /part1/part2, that I use to create urls that look like
http://webapp.com/part1/part2/site1 and
http://webapp.com/part1/part2/site2
When using infopath and trying to publish to this I get a url invalid error. I can publish to other sites not in this managed path without issue.
I have read that this is due to no root site collection but there is one.
Is there anyway to do this?

5 minutes after posting I figured this out.
It does require a root site however not at /.
If you are wanting to have /part1/part2/sitex in your url and you want to be able to publish forms to this you must create an Explicit inclusion type of path on for part1.

Unable to publish InfoPath Form on managed path site.

Hi,
We are unable to publish InfoPath Form on managed path example
https://testsite.com/ac/marketing/dept/
Managed Path= /ac/marketing
dept is site where we are publishing InfoPath Form.
Error: The Following URL is not valid
https://testsite.com/ac/marketing/dept/

Hi Imran,
I understand you got invalid url error when publish InfoPath form to managed path. Could you test if the issue occurs to other sites?
Here is a similar issue which is solved by creating an Explicit inclusion type of path on for managed path url, please refer detailed information via:
https://social.technet.microsoft.com/Forums/en-US/9856491d-4e8c-4c37-bdb6-ce593bb5b475/infopath-publish-and-managed-path-issue?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

How to set master page for Wildcard inclusion Managed path in Sharepoint 2013

I am using sharepoint 2013. I created mysite in root level for newsfeed. Also i included wildcard inclusion managed path named as
my. If i am clicking newsfeed the page url is http://webapplication:port/
if i am clicking sites the page url is http://webapplication:port/my/CURRENTUSERNAME/Social/Sites.aspx#IsEditing_WPQ4=1.
I can apply master page for newsfeed site using sharepoint designer. But i cant apply for
my path.
If am opening http://webapplication:port/my/vijay in designer i can change the master page. But my requirement is to apply master page for http://webapplication:port/my
for all users have same master page.
How to solve this . Thanks in advance.

You need to update the mysitehost masterpage. all master pages are created as mysitehost template.
Here is how you do it.
Create a site collection with template as mysitehost
Modify the mysitehost masterpage
Once it is done, update the mysitehost in user profile service application
If this helped you resolve your issue, please mark it Answered

[svn] 4910: Implementing workaround for history manager rendering issue ( Firefox/Mac) caused by a long standing player bug.

Revision: 4910
Author: [email protected]
Date: 2009-02-10 11:51:58 -0800 (Tue, 10 Feb 2009)
Log Message:
Implementing workaround for history manager rendering issue (Firefox/Mac) caused by a long standing player bug.
Bugs: SDK-17020.
QE Notes: None
Doc Notes: None
Reviewer: Alex
Tests: DeepLinking
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17020
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/managers/BrowserManagerImpl.as
flex/sdk/branches/3.x/templates/html-templates/client-side-detection-with-history/history /history.js
flex/sdk/branches/3.x/templates/html-templates/express-installation-with-history/history/ history.js
flex/sdk/branches/3.x/templates/html-templates/no-player-detection-with-history/history/h istory.js

Splitting Site Collection and Changing the Managed Paths

Hi there,
I was hoping for some advice. We are planning the upgrade our SP 2010 to SP 2013. We have one Site Collection whose DB is nearing 180GB and growing so we are going to "split" it up into four.
So, the logical thing would be to export sites/subsites and import them into their own site collection. What I have found though is that when doing this, the workflow history is not kept - we need the workflow history so this is not an option.
My other thought was to restore the DB, move the contents to a new Content DB, delete out of there what I don't want and do that four times. That could work but then I get the problem of the URL. I'm assuming by restoring this same DB four times
it will be using the same URL?
So, if anybody knows of a tool out there that can do an export/import that will keep the workflow history that would be perfect (it would have to be free...) - or, how can I restore the DB's to new URL/Managed Paths? Or maybe you have a better
solution? Any help would be appreciated.

Rebecca, thanks for the suggestion - I just think that could get a bit messy for my users.
Alex, the Workflow Cleanup job is disabled as we need to keep a record of who approved the task items. I cannot lose the history.
What I have done, and have only just started testing, was to backup and restore in Powershell the "Root site" and delete the three subsites. Then, do the same again but this time, restore to a new URL
http://blogs.msdn.com/b/erica/archive/2013/11/26/customer-question-renaming-site-collections-in-sharepoint-2013.aspx
So, I've the done the following:-
Backup-SPSite http://domain/sites/HR –Path E:\Backup\HRBackup.bak -UseSqlSnapshot
Restore-SPSite http://sp.contoso.net/sites/HR/Subsite1 –Path E:\Backup\HRBackup.bak -ContentDatabase SPS_HRSite1
Restore-SPSite http://sp.contoso.net/sites/HR/Subsite2 –Path E:\Backup\HRBackup.bak -ContentDatabase SPS_HRSite2
Restore-SPSite http://sp.contoso.net/sites/HR/Subsite3 –Path E:\Backup\HRBackup.bak -ContentDatabase SPS_HRSite3
Obviously space could be an issue. Not a perfect solution but workflow history is kept and I've been able to split my Site Collection. My next challenge is moving the subsite into the root of that new site collection. I added a comment here if
anybody has any answers -
https://social.technet.microsoft.com/forums/sharepoint/en-US/1dbd3d7c-ccd3-42e2-ba48-ad5731f38a58/change-subsite-to-toplevel-site-without-changing-the-link?prof=required

Create Root Web for Wildcard exclusion Managed path in SharePoint 2013

Hi,
I have some hundreds of site collections in a web application under a managed path which is wildcard inclusion.
For ex : https://demo2013.com/sites/siteA, https://demo2013.com/sites/siteB, https://demo2013.com/sites/siteC and so on.
In SharePoint we cant create root web for the wildcard inclusion Managed path. But i need to create a site collection at the root for the managed path sites.
Is there any other way to create that?
Any help is highly appreciated.

so you're generally aware of a very NECESSARY technical requirement.
You cannot have a managed path that is both explicit (and allows a site collection to exist at the path) AND wildcard (allowing site collections at child URLs).
It's a performance issue... when the URL is detected, it needs to either check the site collections (wildcard), or find the parent site collection and dig into sites/subsites (explicit).
Additionally, there would be HUGE concerns if you create similarly URL'ed subsites.
Accept the technical restriction, and design an Information Architecture that is not hampered by said restrictions.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Creation of user mysites under different managed paths

Hi,
Regarding creation of user Mysites, can two users have different mysites under two different managed paths?
The scenario for my case is like this:
I've a SharePoint 2013 farm attached to a domain contosso.com. Under that AD, I've created two different OUs (Organizational Units), say org1.local and org2.local. Two users are created under the OUs, the usernames being [email protected] and [email protected]
In my SharePoint 2013 farm I've created a Web Application, say SharePoint - 80, to host the MySite Host Site Collections. I've also created two managed paths under SharePoint - 80, say, /personal and /sites.
Now I want to create two user mysites, for the users created above. My question is that can we form the urls for the user mysites as below:
http://HostSiteCollection1/personal/user1_org1_local (for user1 of OU org1.local) and
http://HostSiteCollection2/sites/user1_org2_local (for user1 of OU org2.local)
Please suggest as we are totally stuck.
Thanks in advance,
Arnab

Hi,
According to your post, my understanding is that you wants to create different MySites under different managed paths.
We can create different managed paths for different MySites for UPA in partitioned mode.
Harbar has written a good blog about creating the MySite host using that same multi-tenant setup.
http://www.harbar.net/archive/2010/09/14/sp2010mt6.aspx
Specifically, you use Set-SPSiteSubscriptionConfig to point to a particular OU for user accounts.
Next, you create a site using New-SPSite bound to that subscription for your MySite Host (e.g. New-SPSite
https://customerA.sharepoint.com/mysites -Template "SPSMSITEHOST#0")
And finally you connect to the UPA Proxy that you previously created in partitioned mode to synchronize users with that particular subscription using Add-SPSiteSubscriptionProfileConfig -ID <Subscription ID> -SynchronizationOU CustomerA -MySiteHostLocation
"https://customerA.sharepoint.com/mysites".
For more reference:
https://social.technet.microsoft.com/Forums/office/en-US/820b1937-4b83-4fd3-8997-118ea13e23ef/sharepoint-2013-my-sites-for-host-based-site-collections?forum=sharepointgeneral
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Server 2012: Remote desktop licence manager not issuing licences

Hi,
I am battling with an problem which i cannot seem to resolve and no other forums actually come to a conclusion on how to resolve this problem!
I have a windows server 2012 server which is NOT part of a domain.
I have installed Remote Desktop Services and also installed the Remote Desktop License manager and i just cannot get the license manager to issue cals when users connect remotely via RDP
I have installed an extra two CAL's and tried using them as both a "Per User" and also "Per Device" but still does not work.
I have now run out of my grace period and cannot connect to the server at all
I have also tried changing some gpo's with no luck,
Computer Policy -> Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
"Use the specified RD license servers" = myservername
"Set the Remote Desktop licensing mode" = Per User
How can i fix this?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
Have you seen that you have activated RDS License server before installing CAL?
Please check that the License Server should be part of ‘Terminal Server License’ group in Active Directory Domain Services. You can also configure RD License server manually by powershell commmand. Please check below article for information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
In addition, please install below Hotfix and verify the result.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
Hope it helps!
Thanks.
Dharmesh Solanki

Solaris 9, Solaris Management Console ISSUE

Solaris 9, Solaris Management Console ISSUE
I have Solaris 9 installed and I am unable to use the Solaris Management console.
I have managed to start it:
/etc/init.d/init.wbem start
/etc/init.d/init.wbem status -> shows it's running
But if I try browser with the link http:// host:898, I have got the following error:
"A web version of the Solaris Management Console is not available at this time."
any Idea why?

Are you running Trusted Extensions? What patch cluster are you on? What toolbox are you opening?

How to change managed path of a site collection (without backup/restore)?

Hi
Other than backup/restore a site collection to another site collection with different managed path, is there is any other way to change the managed path of a site collection directly using Powershell or Central Admin?

Yes you can use powershell script to change the managed path.
Reference
http://jshidell.com/2012/06/26/moving-sharepoint-2010-site-collections-between-managed-paths-using-powershell/
http://technet.microsoft.com/en-us/library/cc261845.aspx
http://technet.microsoft.com/en-us/library/ff607693.aspx
http://technet.microsoft.com/en-us/library/cc288905%28v=office.14%29.aspx
Regards,
Sairam Avacorp Technologies

JEE WebSphere Management Pack: Issue with 8.5.5 Discovery

Is WebSphere Application Server 8.5.5 supported as a discoverable JEE Application Server within System Center Operations Manager 2012 R2? We have tried just about everything at this point....
Currently Running JEE IBM WebSphere 8 Application Server MP version 7.3.2135.0
Agent Running as Proxy
RunAs account created and bound to server
BeanSpy deployed and functioning via query.
Universal Discovery used with no success. (NewJ2EEAppServer.ps1 does not except version 8 of WebSphere).
Any help would be appreciated

Hi Deem13,
Please look at these posts:
http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2012/05/21/manually-discovering-jee-application-servers-with-scom-2012.aspx
http://social.technet.microsoft.com/Forums/systemcenter/en-US/d15bc060-a071-4063-bf5d-c4ec9f0d8cbb/jee-websphere-management-pack-issue-with-discovery?forum=operationsmanagermgmtpacks
http://blogs.inframon.com/post/2012/04/27/WebSphere-monitoring-with-the-JEE-Application-Performance-Monitoring-management-packs.aspx
Natalya

Site Manager Update Issue Continues

Duncan;
It appears that the iTunes U Desktop Application update issue has not been resolved. I added new content to a collection (see attached link) on Friday. As of this morning, the tracks have not appeared in the iTunes U Desktop application (ver. 10.0.1), although they do appear in the Quick View Preview, but cannot be previewed in that window.
The tracks have been available for preview and download all weekend on the iPad and iPhone.
Syd Rodocker
Tennessee Department of Education
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewiTunesUCollection?id=39129 4396

Greetings All;
Just checking to see what, if anything has happened with the Public Site Manager Update issue on your campus or in your office.
I've uploaded content that still hasn't shown up in the iTunes Desktop Application in over two weeks.
Oddly enough, I have added URL's to our site, and that information shows up within an hour of Publishing the site.
Just wondering if anyone has experienced a resolution of the issue.
Syd Rodocker
Tennessee Department of Education

Managed path for host named site collection is farm level or web application level?

Hi,
I would like to get advice.
I created a webapplication for host named site collections.
these are my host named site collections (except http://sp2013) under my webapplication
Root Site Collection: http://sp2013
Site Collection: portal1.sg
Site Collection: portal1.sg/research
Site Collection: portal1.sg/intranet
research and intranet managed paths are farm level
all my host named site collection will be accessed by http and https except "intranet" site collection will be only accessed by https
so I changed the Intranet zone for site collection using Set-SPSiteUrl
Set-SPSiteUrl (Get-SPSite "http://portal1.sg") -Url "https://portal1.sg" -Zone Intranet
Set-SPSiteUrl (Get-SPSite "http://portal1.sg/research") -Url "https://portal1.sg" -Zone Intranet
Set-SPSiteUrl (Get-SPSite "http://portal1.sg/intranet") -Url "https://portal1.sg/intranet" -Zone Intranet
Now I need to create "search" site collection for "Enterprice Search Center"
My question is that for the "search" managed path ... should i use farm level or web application level?
"search" site collection will be will be accessed with both http and https also.
Thanks a lot!

managed path for HNSC is farm level and u can have 20 managed path
while managed path for path based is 20 per web application in your case if you are going to have a a separate web application for search then u will use web app
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

What is the benefit of using managed paths?

Why not just put everything under /sites? What is the value in organizing sites under managed paths - aprt from it looking nice what other benefits does it bring? For one thing organizations change their structures sometimes drastically and surely admins
don't want the added burden of users not wanting their team site under a certain path anymore etc. Unless it brings some other value I'm struggling to see the point - can anyone enlighten me?
Cheers
Jonj

Hi Jonj,
Managed path is path for your site collection.It is defining the path for sharepoint items within the sitecollection.Without this a sharepoint site collection would not e able to recognize any item inside the site.Please read the more from
Use of Managed Path . This will clarify your doubt related to managed path use.
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

Managed Path Issue

Similar Messages

Maybe you are looking for