Managed Ports in DFM not generating alert
I've just added a new 3750 switch in DFM. It is in known status and the ports that I want to managed are set to TUE. However, I do not get any alert in DFM console whenever one of the managed ports go down. I have tried to delete and rediscover this device from DFM but still the same.
I missed that you said you "typed" the shutdown command. This won't work. If a managed port/interface is shutdown, then DFM considers that a healthy state. That is, the administrator has said, "this port is not being used." No event will be generated. To really test DFM, you need to "no shut" the port, then unplug it. That should generate an event after about four minutes.
Similar Messages
-
SQL MP - System Center Management Health Service Credentials Not Found Alert Message
Hi Dears,
I have read so many open cases, but I could not find solution to my situation...
Error: System Center Management Health Service Credentials Not Found Alert Message
Desc are 1 of those 2:
An account specified in the Run As profile "Microsoft.SQLServer.SQLDiscoveryAccount" cannot be resolved.
An account specified in the Run As profile "Microsoft.SQLServer.SQLDefaultAccount" cannot be resolved.
Okay, I am fine, I verify the RunAs account configuration and yes this is the problem... I was able to solve it for those SQL running servicec account using domain user account, I created the run as account, and assoistte it with SQL profiles,
and it is fine....
BUT, what about my 8 SQL Servers running SQL Service Account under System and Network accounts,
so how Can I add this coz I cannot target all objects,so what shall I target (Object Health Service or WHAT)?
Please I need it step by step coz I am not able to handle this issue....
Thank you GuysHi,
If you have not distributed the Run As Account to a system, but we discovered SQL on it, you will see the error message.
This condition may have occurred because the account is not configured to be distributed to this computer. To resolve this problem, please distribute the account to this computer if appropriate. You can refer to the following blog to distribute the Run As
credential.
Niki Han
TechNet Community Support -
SCOM does not generate alert for logical disk space
Hi,
Today we noticed that one of agent in SCOM has drive space below 5% and 500 MB but SCOM did not generate any alert.
I have also verified that there is no override set for this agent's logical disks. I have also verified that discovery is able to discover all disks on server but monitoring is not working as expected.
I have flushed health service on agent but it didn't help.
When I gone through event logs on agent, I found below events:
Log Name: Operations Manager
Source: HealthService
Date: 5/26/2014 5:13:05 AM
Event ID: 1103
Description:
Summary: 6 rule(s)/monitor(s) failed and got unloaded, 1 of them reached the failure limit that prevents automatic reload. Management group "XXXXXXXX".
This is summary only event, please see other events with descriptions of unloaded rule(s)/monitor(s).
Log Name: Operations Manager
Source: HealthService
Date: 5/26/2014 5:14:21 AM
Event ID: 1206
Task Category: Health Service
Description:
Rule/Monitor "Microsoft.Windows.Server.2008.LogicalDisk.FreeSpace", running for instance "F:" with id:"{36ED7395-3798-A361-5017-327F6FA50030}" failed,
got unloaded and reached the failure limit that prevents automatic reload. Management group "XXXXXXXXX".
Please let me if what we need to do here.
Thanks.Do this
Change startup type to Window Management Instrumentation (WMI) Service to disabled
Stop the WMI Service; you may need to stop IP Helper Service first or other dependent services before it allows you to stop WMI Service
Rename the repository folder: C:\WINDOWS\system32\wbem\Repository to Repository.old
Open a CMD Prompt with elevated privileges
CD windows\system32\wbem
for /f %%s in ('dir /b /s *.dll') do regsvr32 /s %%s
Set the WMI Service type back to Automatic and start WMI Service
cd /d c:\ ((go to the root of the c drive, this is important))
for /f %%s in ('dir /s /b *.mof *.mfl') do mofcomp %%s
Reboot the server
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway -
Manage-bde command is not generating recovery key on network location
Hi,
I am trying to save the recovery key to the network share location and start up key in the USB drive while enabling bit locker.When the OS drive gets encrypted, the default folder for recovery password shows that it contains 1 file but not getting anything
inside it when i checked the properties of the folder.
i have already changed the group policy as "choose default folder for recovery password".
I am using the command to enable the bit-locker as "manage-bde.exe -on C: -rk
<network location to save recovery key> -sk <location of the USB drive>
-rp to enable the bit-locker. It is generating the start up key in the USB but not the recovery key on network share.
Can anyone suggest what i am missing or what else i should do to generate the recovery key on network share.
Does manage-bde process be able to save the recovery key on network share or it hand over to some other process to perform this task.
Thanks
Gaurav RanjanI got you Manoj, but I want to ask you one think that what if i lost the startup key or my USB stick. I have my recovery key on the network share. In order to log-in my machine I need the recovery password. From where i will get the recovery
password(48 digit). Surely from the recovery key on the network share. So how can i get the recovery password if only we have the recovery key.
I know both are different in context. Both are two different thing. I have lost my USB stick along with the recovery password and I have to log-in my machine. How can i do that i want to know that. Do there is any method to get recovery password from the
recovery key on network share. I have retrieved the recovery password when the recovery key in AD. But this time it is on network share.
Also one think which I need to solve is that the manage-bde -protectors -add command creates a new .bek file along with the older one. So the .bek file which get shown at the time of the start up of the machine is different from that stored in the network.
So i am getting confused as which .bek file is for which machine and hard to retrieve the password.
Is there any method to store recovery key on network without the -protectors -add command line so that both the .bek file should be matched and can easily be known for indiviual machine in an OU. As if both the .bek files will be different it would be difficult
to to retrieve the recovery password for the machines.
Please do inform if you need some more information about the scenario if i missed something.
Thanks
Gaurav Ranjan -
Option to Manage Thresholds in DFM not available
Hi I'm running DFM 3.2.0 and when I tried to expand the tab to manage threshold on interfaces nothing is there.
I tried rebooting the server to see if it fixes the problem no luck.
I am able to expand Device type groups and make changes, not for the DFM or User defined group.
I was able to last week though.It looks like something may be wrong with your DFM repository files. Try shutting down Daemon Manager, then delete NMSROOT/objects/smarts/local/repos/icf/DFM.rps and DFM1.rps. Then restart Daemon Manager, and see if you can modify threshold settings.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com -
Hi Anyone can assisting on this. The SCOM 2007r2 i managed suddenly do not pump out alerts.
I have perform full scom service restart(data access, agent, config). it no load up related datawarehouse like(stored, write)
I also restarted my sql db services. It show me the error like this. Anyhow i can fix it
The request to synchronize state for OpsMgr Health Service identified by "bdb1712b-0a9a-bbe3-9630-41f2da9f64a1" failed due to the following exception "System.Data.SqlClient.SqlException: Cannot open database "OperationsManager" requested
by the login. The login failed.
Login failed for user 'HK\svc-scomsdk'.
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlConnectionHandler.Open(SqlConnection sqlConnection, RetryPolicy retryPolicy, DatabaseConnection databaseConnection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.EnterpriseManagement.Mom.DataAccess.DatabaseConnection.Open()
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
at Microsoft.Mom.ConfigService.OpsMgrDataAccess.ConfigurationDataAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.DataAccess.DatabaseAccessor.QueryInstanceProperties(ReadOnlyCollection`1 instances)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.Instances.CollectPublicProperties(ReadOnlyCollection`1 identities, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems.ConfigurationItemCollection`2.CollectPublicProperties(IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.ConfigurationItems..ctor(StateContext stateContext, IConfigurationDataAccessor dataAccessor)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Execute(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.CreateResponse(Managers managers)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.Managers.Synchronize(OnDoSynchronizedWork onDoSynchronizedWork)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)
at Microsoft.Mom.ConfigService.Engine.ConfigurationEngine.CommunicationHelper.StateSyncRequestTask.Run(Guid source, String cookie, Managers managers, IConfigurationDataAccessor dataAccessor, Stream stream, IConnection connection)".Hi,
I would like to suggest you reset the SDK account password (in this case, it seems like that the account is 'scomsdk'). And change the password for the account in service configuration.
Please go through the below article for details:
How to change the credentials for the SDK Service and for the Config Service in Microsoft System Center Operations Manager
http://support.microsoft.com/kb/936220/en-us
Regards,
Yan Li
Regards, Yan Li -
Generating Alerts for OFM discrepancies
Hi Gurus,
Please validate my thinking:
To generate alerts for discrepancies in DFC01 timeseries for OFM process, my assumption is this is done by:
1. Definining OFM Service profile and selecting "Create alerts"
2. Running a PSM job using service DFC_ORDER_FORECAST
Currently this does not generate alerts, yet there are discrepancies for products between customer plan and suppliers plan.
Please advice if I am missing something or in case I am using wrong PSM service.
Thanks,
J.Hi
you can achieved this functionality by using a UDF for alert generation and also give the details of your clarity tools in the UDF i.e. URL etc.
Thanks
sudhir sharma -
CSS11503 Management port connection loss
Hi we run 2 x CSS11503 with box-box redundancy. I have configured both management ports with IP's and default gateways. The management ports work fine when the box is in "master mode" but as soon as it goes in to "ackup mode"I loose connection to the management port. It seems to me that when the box is in back up it shuts down it's TCP/IP stack??? Is there anyway to override this on the Management port?
Cheersthe management port should not be down when the CSS is in passive state.
Are you sure the response from the CSS was going out via the management port ?
Where you in the same vlan of the management port ?
If not, did you configure a management route to reach your pc ?
Regards,
Gilles. -
SCOM 2012R2 - Alerts Not Generating, Must Restart SCOM to Resolve
Hi TechNet,
I am having an issue with my SCOM 2012R2 where the system goes into a state where alerts are not generated. We start to see events like the one below leading up to the point where this happens. This is resolved by restarting our SCOM MS. Is there another
solution besides having to restart our SCOM MS every day?
A Bind Data Source in Management Group has posted items to the workflow, but has not received a response in 36720 seconds. This indicates a performance or functional problem with the workflow.
Workflow Id : Microsoft.SystemCenter.CollectPerformanceData
Instance : SCOM01.xxxxx.LOCAL
Instance Id : {1189BAF9-AFDC-ADA0-196D-D749A369A350}
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="HealthService" />
<EventID Qualifiers="32768">2115</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-02T11:28:11.000000000Z" />
<EventRecordID>2683831</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>SCOM01.xxxxx.LOCAL</Computer>
<Security />
</System>
- <EventData>
<Data>Concerto Systems Management</Data>
<Data>Microsoft.SystemCenter.CollectAlerts</Data>
<Data>SCOM01.xxxxx.LOCAL</Data>
<Data>{1189BAF9-AFDC-ADA0-196D-D749A369A350}</Data>
<Data>37320</Data>
</EventData>
</Event>Hi,
Please refer to the Kevin's reply in the thread below:
https://social.technet.microsoft.com/forums/systemcenter/en-US/f88bf528-d896-495f-ada2-abfda37e634e/a-bind-data-source-in-management-group-xyx-has-posted-items-to-the-workflow-but-has-not-received-a
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Alerts are not generated at all
Hello.
Please, help me with following problem.
I have Site Server (SCCM 2012 with SP1) installed on server (Win 2008 R2 w SP1). On this server also installed MP, DP, FSP, RSP, Site Database, SUP. On second server (win 2008 R2 wSP1) installed MP and SUP.
I want to monitor some SCCM functionallity with Alerts. I configure alerts for MP Health, SUP Synchronization failures, Database low disk space and so on.
When i stop service (SMS Agent Host) on second server (or disconnect server from network) i can see Management Point status (in Site Status Status) changed to Critical (also appropriate event appears in event log). But no alert generates in SCCM.
In test environment (this is not copy of production environment.. simply clean install of SCCM with some configuration changes for testing purpose) alert successfully generates.
In test environment I see the following messages in smsdbmon.log:
SQL>>>exec dbo.spGetChangeNotifications SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:25:36 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)RCV: UPDATE on AlertForTrigger for SMS_Alert_upd_SMSProv_AlertForTrigger [16777224 ][72057594038089152] SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>set quoted_identifier on;set ansi_warnings on;set ansi_padding on;set ansi_nulls on;set concat_null_yields_null on;set arithabort on;set numeric_roundabort off;set DATEFORMAT mdy; SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>exec dbo.spNotifyProvider @Component=N'SMS_Alert_upd_SMSProv_AlertForTrigger', @TableName=N'AlertForTrigger', @Action=2, @Key1=N'16777224', @Key2=N'', @Key3=N'' SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>delete from TableChangeNotifications where RecordID in (72057594038089152) SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>exec dbo.spGetChangeNotifications SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:34:01 3192 (0x0C78)
In production system this messages not generated.
Also no alert generates for SUP Sync failure
mcp, mcdba, mcsa, mcse, ccnaHello. No, problem not solved.
We agreed with customer, that we can use event viewer subscriptions instead of sccm alerts.
OK, but exactly how did you setup the alert?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Could not generate timestamp: handshake alert: unrecognized_name using JRE 1.7.7
I'm new to this so I could be making some mistakes, but I'm learning Fireworks and I'm using an example from Chapter 13 of the Classroom In A Book for CS5. It creates an AIR application, but when I try to generate the application I get the following error.
Could not generate timestamp: handshake alert: unrecognized_name
In my searches I came across a Flash Builder Help question and answer that lead me to a Flex Bug and Issue Management System report (http://bugs.adobe.com/jira/browse/FB-33243) that suggest this is a bug that effects JRE 1.7.
It suggest the following work around:
Uncheck the Timestamp check box in Package settings wizard and click finish.Application is successfully exported to Signed AIR package.
OK, what? Does this Settings wizard exhist in Fireworks? Is there a workaroung?
If I go back to JRE 1.6 does it work?
Thanks,
DanChris,
Fireworks is supposed to be able to make AIR files. There is a Create AIR entry under the Commands menu. I filled in the information for self certification and everything looks good until the last step. When Fireworks tries to make the AIR files I get the error message.
Thanks,
Dan -
Emails are not generated in CUP To approver, manager
Hi ALL,
I Configured one work flow in CUP. I did SMTP Server setting, EMAIL Remainder setting.
When I create new account request , CUP is provisioning access properly and automatic mail is going to that user. Mail is not coming to Approve r.
When I create other requests (change account etc) provisioning is done properly, but mails are not generated to user, approve r, manager .?
How can I fix this? Please suggest.
Thanks,
JosephJoseph,
There can be only 2 issues here:
1) SMTP server config is not correct or CUP is not able to reach SMTP server.
Ask Basis person to ping the SMTP server from CUP. If it works, then don't worry about 1).
2) Email reminder job is not running or emails are going to junk email
Check the log for email reminder job and make sure it is activated and running. check your junk mail folder.
Rgds,
Alpesh -
Credit Management- KRML Output not generated for Sales Order ( v.v.u.)
<u>Credit Management - Credit control check at Sales order Level</u>
While saving the Sales order,which failed the Credit check ( As per Automatic Credit Check Settings), there is no output generated for output type KRML, for Partner Fn KB/KM. Normally,If credit check is NOK, then while saving the sales order, an internal mail is sent to the SAP office inbox of the Credit representative ( KB/KM). There is option for an external send also. The problem faced by us is that, the mail is not going in SAP Office inbox in quality server , it is going in developement server.We checked in table NAST that the Output for KRML (o/p type) is not generated. Kindly suggest what could be the reason.
Regards
Sunil KumarDear Mr. Gauravjit,
Thank you for your valuable reply.
At the Extra-Output-Header-edit-goto-det analysis ,system give message as KRML o/p is not generated since Requirement 009 is not being fulfilled. But we checked the VBUK-CMGST = B is satisfied. Still the o/p not generated!
Also , in VV11 we maintained the Cond Records. Still the o/p is not coming.
The output is coming in Devlopment , but in Quality the output is not coming.
Can anybody please help !
P.S. I am colleague of Mr. Sunil Kumar, and reply on behalf of him.
With Best Regards,
Kaustuv -
Generating Alert in SCOM of all the services whose type is automatic and that service is not running
Hi
I want to generate alert in SCOM for all the services whose type is automatic and they are not running due to any reason. I know that i can generate alert for a particular service that it is running or not. But i want to generate alert for all the services
whose type is automatic and it is not running.
ThanksThis has been asked before. Here are some links to help you:
Link 1
Link 2
Link 3
Link 4
Link 5
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you. -
Could not generate DH keypair error
hi,
My coding was running fine with JDK 1.41.3 but when i am trying to use jdk 1.5 its giving me an error
"RuntimeException : Cound not generate DH keypair: in the method call sslSock.startHandshake();
what could cause this ?Did you get any replies to this? If so, can you pass it along?
We are having the same issue. Everything was fine with 1.4. With 1.5, on the server side, we get the following error:
javax.net.ssl.SSLException: Received fatal alert: internal_error
The server code is:
SSLServerSocket ss = null;
try {
KeyManagerFactory kmf;
KeyManager[] km;
KeyStore ks;
TrustManagerFactory tmf;
TrustManager[] tm;
SSLContext sslc;
// Create a keystore that will read the JKS (Java KeyStore)
// file format which was created by the keytool utility.
ks = KeyStore.getInstance("JKS");
// Load the keystore object with the binary keystore file and
// a byte array representing its password.
ks.load(url.openStream(), keystorepass);
// Gives us a factory for key managers that will let
// us handle the asymetric keys we created earlier.
kmf = KeyManagerFactory.getInstance("sunx509");
// Initialize the key manager factory with the keystore object,
// again using the same password for security since it is going to
// access the private key.
kmf.init(ks, keystorepass);
// Now we can get the key managers from the factory, since it knows
// what type we are using now.
km = kmf.getKeyManagers();
// Next, create a trust manager factory using the same algorithm.
// This is to avoid using the certificates in cacerts that
// represent an authentication security risk.
tmf = TrustManagerFactory.getInstance("sunx509");
// ...then initialize it with the keystore object. This time we don't
// need the keystore password. This is because trusted certificates
// are not a sensitive element in the keystore, unlike the
// private keys.
tmf.init(ks);
// Once that's initialized, get the trust managers from the factory.
tm = tmf.getTrustManagers();
// Almost done, we need a context object that will get our
// server socket factory. We specify TLS to indicate that we will
// need a server socket factory that supports SSL.
sslc = SSLContext.getInstance("TLS");
// Initialize the context object with the key managers and trust
// managers we got earlier. The third parameter is an optional
// SecureRandom object. By passing in null, we are letting the
// context object create its own.
sslc.init(km, tm, null);
// Finally, we get the ordinary-looking server socket factory
// from the context object.
ServerSocketFactory ssf = sslc.getServerSocketFactory();
SSLServerSocket serversocket = (SSLServerSocket)
ssf.createServerSocket(port);
serversocket.setNeedClientAuth(true);
ss = serversocket;
} catch (Exception e) {
SeedServer._logger.error("Unable to create server socket:" + e.getMessage());
System.exit(-1);
while(true) {
SSLSocket socket = null;
try {
socket = (SSLSocket) ss.accept();
System.out.println("Accepted connection from " +
socket.getInetAddress().getHostAddress() +
":" + socket.getPort());
handleConnection(socket.getInputStream(), socket.getOutputStream());
} catch (SocketTimeoutException ste) {
// Error message
} catch (SocketException se) {
// Error message
} catch (Exception e) {
// Error message -- This is the one thats triggered
} catch (Throwable t) {
// Error message
} finally {
try {
if (socket != null)
socket.close();
catch (Exception e) {
The client code is:
SSLSocketFactory ssf = null;
try {
KeyManagerFactory kmf;
KeyStore ks;
TrustManagerFactory tmf;
SSLContext sslc;
kmf = KeyManagerFactory.getInstance("sunx509");
ks = KeyStore.getInstance( "JKS" );
ks.load(url.openStream(), keystorepass);
kmf.init(ks, keystorepass);
tmf = TrustManagerFactory.getInstance("sunx509");
tmf.init(ks);
sslc = SSLContext.getInstance("TLS");
sslc.init(kmf.getKeyManagers(), tmf.getTrustManagers(), null);
// The process is different from here on the client. Instead of
// getting a ServerSocketFactory, we ask for a SocketFactory from
// the SSL context.
ssf = sslc.getSocketFactory();
} catch (Exception e) {
System.out.println("Unable to initialize SSL parameters");
System.exit(-1);
}
Maybe you are looking for
-
InDesign CS5 on MAC - ID Crashing (With Serious Error Message)
After going into Document Setup with a document open, and changing the document orientation from landscape to portrait, InDesign CS5 crashes after clicking OK with an error message (see attached screen shot). I've deleted the settings file by starti
-
Can I edit a video clip in imovie?
I'm new to mac, and I know I am being stupid here, but is there no editing functionality in imovie11. I am referring to editing the actual clip, rather than a project.
-
5400 / 7200 RPM. How To Check That?
hi guys. the box with a brand new external usb drive i am planning to purchase from my local computer store doesn't say whether it's as fast as 5400 or 7200 rpm. how do i normally check that parameter through my computer? i tried checking that on my
-
Menu positioning problem when viewing in Internet explorer on a pc
Hi guys, I have created a website for a football team and I am having problems with the menu. It looks fine in all browsers apart from Internet Explorer. The menu positioning is meant to be on the left hand side but shows far right on the screen when
-
ERROR: (line 0): Internal error compiling the filter.
It seems graph compiler is very touchy. I downloaded pixel bender few days ago, so I bet this is not fixed yet. Thing that compiles: void evaluatePixel() dst = sample (src, outCoord ()); Thing that also compiles: void evaluatePixel() fl