Managed Printers Not Getting Preferences (Server 10.5.8)

Hi all.
I hope this isn't a repeat post.
I have a lab where different users get privileges to use different printers, after much searching I solved the problem of making sure the user only sees what they are supposed to ( from this article http://support.apple.com/kb/TS2689 ).
What now eludes me is I cannot get the clients to remember the settings for each printer (ex. multiple trays, duplex, etc). I have the drivers set correctly on the server, but even if the printer settings are made on the client, they are lost at Log Out. Is there any solution to this?
Best,
Stenz
Also should mention that we are not using print services on the server.
Message was edited by: The Stenz

A log file had filled up and left no free space on the server OS drive.  I had to connect remotely with SSH and move the log to a different hard drive.  This freed up enough space that logging in was successfuly.

Similar Messages

  • Not getting the server pool in the list of server pool

    We are facing following issue. Can you please help on this. Or how can we get help on this. I would be thankful for this.
    We have created a server pool which consists of two vm servers. Two vm servers we created manually.
    We are using following steps to create third virtual server.
    1. Click "next" on "create virtual machine" screen.
    2. Click "next" on "installation media" screen
    3. It asks to select a server pool from the list but we are not getting the server pool in the list of server pool which we created earlier.
    We did this exercise before and we got the server pool name in the list which allowed us to create virtual machine. Now when we reinstalled the vm servers machine and also vm manager, we are not able to do this once again.

    Hi,
    please check the status in Server Pools ( it need to be in Active). then check in the Servers the status need to be in active in VM Manager.

  • Solution Manager does not get service definitions from SAP in self diagnosi

    Hi,
    In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager. 
    Solution Manager XXX does not get service definitions from SAP.
    The production Solution Manager is the master in SDCCN for the test Solution Manager.  In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01.  It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
    It gives the same warning if I point the task to the production Solution Manager system.
    Has anyone seen this before?  Any ideas?
    Best regards,
    Russ

    Hi,
      i guess have you activated SDCCN from your solution manager system too?
    if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
    and Please check this Note 1143775 - SAP service content update
    the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
    please check.
    Thanks,
    Jansi

  • Apaxe axis Call.invoke parameter not getting in server side

    Hi
    I am developing a module in wsdl and axis. I have deployed the wsdl and I am writing the client to dynamically invoke a method which contains some arguments/parameters. But I am not getting the parameters correctly passed or seems like it is getting missed some where.
    QName inputQName // QName of input parameter
    QName returnQName // QName of return type
    Inputparamaeterbeanclass obj;
    All the necessary set methods are called
    org.apache.axis.client.Service service = new org.apache.axis.client.Service();
    org.apache.axis.client.Call call = (org.apache.axis.client.Call) service.createCall();
    call.registerTypeMapping(beanclass of input parameter, inputQName,
    new org.apache.axis.encoding.ser.BeanSerializerFactory(beanclass of input parameter, inputQName),
    new org.apache.axis.encoding.ser.BeanDeserializerFactory(beanclass of input parameter, inputQName));
    call.registerTypeMapping(AuthenticateResult.class, returnQName,
    new org.apache.axis.encoding.ser.BeanSerializerFactory(beanclass of return type, returnQName),
    new org.apache.axis.encoding.ser.BeanDeserializerFactory(beanclass of return type, returnQName));
    call.setTargetEndpointAddress( new java.net.URL(�service url�) );
    call.setOperationName(�operation name�);
    call.addParameter( "arg1", inputQName, ParameterMode.IN );
    call.setReturnType( returnQName );
    Object resultObj = call.invoke( new Object[] obj } );
    After invoke control is going to the correct method BindingImpl class. But in that method, the get method of the argument is returning null.
    Regards,
    Priya Ruby Jose

    Hi Brad,
    Thx for your response.
    1. That standard program is updating cost center group related data in application server.
    2. How to count the buffers to update the app. server
    3. Bapi commit is for commit the work (instead of bapi I gave wait until sy-subrc = 0 up to 1 second) I thought, because of lack    of time it is not updating the app server. So I gave wait.
    4. While executing, let as say... first time the 1, 3,5 & 7th record is updated in app. server. Second time 2, 3,5 & 7th record is updated in app. server. So what ever, it is updating some records & not updating some records .
    By,
    Jeya

  • Iam not getting loacal server home page in brosers.

    hellow sir,
    iam sridhar.I have some technical problem.I started Bea Weblogic version 8.0,Apache Tomcat version 5.0 success fully.But when iam giving url like"http://localhost:8080/manager/html" for tomcat, and url like "http://localhost:7001/console" for weblogic iam not getting servers home page.Iam getting message like"Page cannot be displayed" .
    I thought that there is a problem in the browser.That is why i reinstalled the browser.Iam currently using Internet Explorer 6.0 version.Even after reinstalling iam getting the same message.
    I tried in netscape navigator browser.Iam not getting there also.
    Iam using the Microsoft XP operating Systems.
    Where the problem is.Please give me the solution for this problem.
    Thanks & regards
    sridhar

    Please contact BEA and/or apache. There are forums for these types of issues. This is a Java forum.

  • Group title in Floor plan manager is not getting transported to quality

    HI Experts,
    In Component Configuration "EHHSS_INC_REC_NRM_QAF_V3_BSCI", I have added group and gave title to that group in development.
    The group is getting transported when I release request but the title is not getting transported.
    Could anyone help me, it's urgent.
    Thanks and Regards,
    Santhoshi.

    posting again,
    Can anyone help me as this is urgent requirement.
    With Regards,
    Santhoshi

  • Sap BO Disclosure Management "Could not get Chapter:Connection" Error

    Dear Gurus,
    When i try to View/Edit and download from netweaver to client, i am taking error like this ;
    2/27/2014 3:17:44 PM Start
    2/27/2014 3:17:44 PM frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
    2/27/2014 3:17:44 PM Action received:frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
    2/27/2014 3:17:46 PM Getting chapter:Connecting...
    2/27/2014 3:17:46 PM Could not get Chapter:Connection with 'http://bw01.vektora.com:90/WebServices/WDocumentService.asmx' failed:
    Also screen shot is attached,
    Could you please help guys ?
    Regards
    Kemal

    Dear Gurus,
    When i try to View/Edit and download from netweaver to client, i am taking error like this ;
    2/27/2014 3:17:44 PM Start
    2/27/2014 3:17:44 PM frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
    2/27/2014 3:17:44 PM Action received:frec:http://bw01.vektora.com:90/WebServices/WDocumentService.asmx|0|7|wt1nko55j2ylzw45xjfjia45
    2/27/2014 3:17:46 PM Getting chapter:Connecting...
    2/27/2014 3:17:46 PM Could not get Chapter:Connection with 'http://bw01.vektora.com:90/WebServices/WDocumentService.asmx' failed:
    Also screen shot is attached,
    Could you please help guys ?
    Regards
    Kemal

  • I am not able to configure Exchange in iphone 4, everytime i do, it shows " can not get to server"

    Hi Everyone,
    I tried to configure exchange in my iPhone but could not do that. Evrerytime i got message " Can not connect to server."
    Please let me know how can i use exchange through my iPhone..
    Thanks
    Amit

    I entered correct server URL, even my admin himself entered this but still facing same problem. Other are operating exchange through iPhone..

  • Weblogic 10.3 : Work manager is not getting assigned to a application

    Hi,
    i have assigned a work manager to an application in weblogic-application.xml and able to see that under Deployments
    -> Application name -> Configuration -> Workload tab of weblogic console.
    But while starting server get a warning as
    <Dec 17, 2008 9:45:16 AM IST> <Warning> <WorkManager> <BEA-002919> <Unable to find a WorkManager with name RealWorkManager. Dispatch policy RealWorkManager will map to the default WorkManager for the application SmpMain>
    Can some one help me out how to assign a work manager to a application.
    Thanks,
    Smita

    Thanks for your help.
    When i created a work manager from Deployments -> Configuration -> Workload -> New and the new Work Manager appears in the Application-Scoped Work Managers table. But was not able to see that in Monitering -> Workload Work managers table. Why is that so?
    Regards,
    Smita

  • Batch Management Indicator not getting set for material master

    Hi,
    In one of the material we need to mark the Batch Management Indicator in Material MAster. We had removed all the stocks from the material. But still we are getting error, Stock exists for the material in Plant XXX and Sloc YYY.
    I checked in MARD table and MMBE that for this maaterial there are no stock for said Sloca and Plant.
    One thing which I noticed in the Material Master and MARDH table that there exists some stock in Previous persiod for the said Sloc and Plant.
    Need to know is this error is due to stock shown in previous period. Why system is checking the previous period stock.
    How can we resolve our issue and check this Indicator.
    Please let me know as earliest as possible.
    Thanks
    SG

    Hi,
    Refer OSS Note 30656 - Change base unit of measure/batch mngt requirement
    Following are the details of this note;
    Symptom
    When maintaining a material master record, you change the base unit of measure or the batch management requirement indicator or the valuation category. The system then tells you that this change is not possible since stocks still exist. However, no stocks are shown for the material in the stock overview.
    Reason and Prerequisites
    The message that stocks still exist refers not only to stocks in the current period, but also to stocks in the previous period.
    The reason for checking previous period stocks is that postings can also be made to the previous period when entering goods movements. This would result in inconsistencies if the base unit of measure had meanwhile been changed.
    Solution
    Please check whether stocks still exist for the previous period by displaying, for example, the plant stock view or storage location stock view of the material. You do this by selecting "Extras -> Previous period -> Prev. pd SLoc. stock or Prev. pd plant stock".
    If previous period stocks exist, you can make a withdrawal posting as follows:
          1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
          2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
    You can now try again to change the base unit of measure or the batch management requirement indicator.
    Since the posting of the previous period values to zero is identical with posting to the stocks of the current period, you should reverse the above stock postings (i.e. the stock from the previous period should be booked in again) to make sure that the stock values from the previous and the current periods correspond to the state before the change. Please note, however, that the postings are then carried out using the changed master data from the current period (e.g. account determination, etc.)
    Regards,

  • IPhone 4s can not get email server failed

    Have a iPhone 4s cannot get mail the connection to the server failed

    That usually indicates that the parameters in your email account in Settings > Mail, Contacts, Calendars are not correct. Check them for accuracy.
    There is also a chance that this is a temporary problem if your email provider's servers are having problems.
    Contact your email provider to get the correct parameters for your service.

  • Managed acct not getting online.

    Hello, I have a 3-4 yr old Macbook that is unable to connect to the internet when using Firefox of Safari from a managed acct.
    I have 10 Macbooks all running 10.5 with the same image, they all have admin accts (me), and managed accts. All of them, except one, work fine on the internet from the managed acct. I have checked this computer numerous times, it is getting a proper IP address and works fine from an admin acct. I have set one of the accts to a standard acct and it worked fine, I have redone the accts, reimaged the computer, deleted the preferences of Firefox and Safari, reinstalled Firefox, gone into the user library > app support > firefox and gotten rid of the profile there, made sure the network settings are correct, nothing has worked.
    Any thoughts on what to try next?

    Hi ..
    Your profile indicates your Mac is running v10.9.2. If that is correct, updating OS X may help the connection issue.
    Click the Apple  top left in your screen.
    From the drop down menu click:  Software Update

  • Solaris Management Console not getting started in Solaris 10

    Hi folks,
    I am new to Solaris and installed Solaris 10 on IBM ThinkCenter successfully. But after booting in text mode, I typed smc and it gives error related to DISPLAY.
    Then I tried with the command kdmconfig and I could choose Xsun. In the Video device list, it was showing XF86-VESA Intel Corp. Unknown board.I saved the settings and pressed F2 for testing. I could see the display; but unable to get in to GUI mode.
    Can you help me please?

    Try search the WEB for your display adapter drivers. However, most of new especially intergated graphics are still not supported.
    You may try to get it working with xsun, run kdmconfig and specify as display adapter VGA or Super VGA. I know that in some cases it helps.
    As well do the same with Xorg and run /usr/X11/bin/xorgcfg, try to find somekind of generic VGA in drivers that are listed there.
    As I know, smc runs only in graphical mode.
    I saved the settings and pressed F2 for testing. I could see the displayDid you see buttons on that display (something like "yes", "no")?
    xsun is very hard to set with most of display adapters and monitors, sometimes it shows only part of the screen, so you might not to see these buttons. However if you see them, press "yes" (or something like that, I dont exactly remember). Then reboot and your computer should start the GUI.

  • Can not get WebLogic Server 6.1 plugin in Update Center

    Could you please advise me how to intergrate Sun One Studio 4 and WebLogic Server 6.1?
    many thanks

    You can download the Weblogic Server 6.1 here:
    http://commerce.bea.com/downloads/weblogic_server.jsp
    You can get the one that supports J2EE 1.2 Plus J2EE 1.3 features. You can also request a CD if for some reason, you're unable to download.
    There's also resources for BEA developers at: http://dev2dev.bea.com
    Hope this helps.

  • Why my iphone 4s can not get mail server failed for wifi ?

    why cannot get mail ? the connection to the server failed ?

    why the connection to the server failed from my wifi?

Maybe you are looking for