Managed Server state "STARTING" after shut it down.
Hello,
I have a really odd situation here. I have a Managed Server with a "STARTING" state but it is really shutdown. I have tried to do "Force Shutdown Now" but the only I can get is this:
Status of Last Action = TASK COMPLETED
State = STARTING
I cannot start the Managed Server because Weblogic says it is in an incompatible state. I have tried to restart the Admin server and delete the folder /cache and /tmp but I cannot solve it. Any help please? Where does WebLogic keep track of the status of its managed Servers?
Thank you,
Oscar
Hello Fabian,
I am using Solaris(unix). The managed server is not running. At least there is no weblogic process running on that machine (ps -ef | grep weblogic). I will try tomorrow to search of the name of the managed server as you suggested.
It seems that the Admin server saves the status "STARTING" in any place for that managed server. Tomorrow I will also try to start the managed server from command line and later on shut it down from the Admin server(GUI). Let's see whether the managed server sends the notification to the admin server telling him that it was shut down correctly.
Thanks for your reply,
Oscar
Similar Messages
-
Weblogic Managed server not starting after installing OIM 11g
Hi All,
I have installed OIM 11g successfully and I am able to start the WL Admin Server. But when I try to start the Managed Server for OIM (oim_server1), the screen just disappears and do not generate any logs.
I haven't used the WL JDK while installing, used seperate JDK. Does it create any problem in starting the managed Server.
Please help in solving this..
Thanks,
anagHi,
How are you starting the managed server, is it like this?
xlStartManagedServer.cmd oim_server1 <URL of admin server>
~ Ketan -
Help I tried opening my Mac book pro after shutting it down but it won't open and all I get is a grey screen and a mo Jong mouse but nothin else so can u help me ??
Hey HJA96,
Thanks for the question. I understand that your MacBook Pro is booting to a gray screen. The following article addresses this symptom, and provides relevant troubleshooting information:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Some of the steps included:
- Disconnect, test peripheral devices and network cables
- Perform a Safe Boot
- Reset the NVRAM / PRAM
- Start from your Mac OS X Install disc; use Disk Utility
- Check your cables and power source
- Remove third-party RAM and internal hardware
- Perform an Archive and Install installation of Mac OS X
- Perform an Erase and Install installation of Mac OS X as a last resort
(See article for full information on all of the above)
Thanks,
Matt M. -
Why Managed server stats "unavailable" in Enterprise Manager ?
Hi All
i have setup a weblogic domain having AdminServer and a managed server . i have also configured em with this doamin. i am facing a problem in reflecting stats of managed server in em. when i start the managed server from admin console via nodemanager ,it shows managed server has started and same is also reflected in EM, but the stats for that managed server remains "unavailable".
in the other scenario when i start the same managed server via startMnagedserevr script, the stats get reflected without any issue.
why the stats are not getting reflected when i start the managed server via nodemanager ?
Thanks
Harry
Edited by: Harinderjit Singh on Feb 17, 2012 11:02 PMCan you check the Admin Server log and node manager log for any exceptions when you are starting the Managed Server through the node manager.
Sometimes there is some communication exception between the Admin Server and the node manager due to which the em console is unable to show the status of Managed Server.
thanks,
Sandeep -
I can't RDP my VM anymore suddently after shutting it down for one day
I can't RDP my machine suddenly after shutting it down for one day. can anyone help please ?
If it's this reliable we don't need it but we will make this decision later. we prepared this machine for demo today spending one week on it and today when we need it, its not working. typical microsoft product.Hi,
Which region is that VM in? In addition, what error messaga have you recieved when you connected into the VM?
Firstly, I recommend you to check the quick glance of the VM to make sure that all the parameters are displaying. If not, please restart it to see if the issue persists.
In addition, you can refer to the article below for troubleshooting:
[Forum FAQ] How to troubleshoot common RDP
issues for Windows Virtual Machines in Azure
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Why won't my Time capsule power on after shutting itself down?
Why won't my Time capsule power on after shutting itself down?
Suggest that you unplug the Time Capsule from the power cord and let it rest for 15-20 minutes. Verify that the AC wall socket has power by testing another device like a lamp there.
Try to power the Time Capsule back up.
If it will not power up, unfortunately there has likely been a failure in the power supply section of the Time Capsule.
You will need to take the Time Capsule to an Apple store....if you have one near you....or contact Apple Support directly to go over your options.
http://www.apple.com/support/contact/ -
Weblogic managed server shutdown immediately after going to STARTING state
Our configuration has 3 managed servers M1, M2, M3. M2 and M3 are in a cluster to share JNDI name for JMS servers. Are M3 server often shutdown on starting up just after the server goes to the STARTING state. I have 2 log traces. The first shows when the server shuts down, the 2nd is when the server initializes correctly. No configuration changes, just a timing race condition. Any help is greatly appreciated.....
Bad startup log trace....
Starting WLS with line:
/Oracle/Middleware/jdk1.6.0_25/bin/java -server -Xms2048m -Xmx2048m -XX:NewSizeThreadIncrease=200 -Dweblogic.ThreadPoolPercentSocketReaders=50 -XX:MaxPermSize=512m -Dweblogic.Name=staAdapter -Djava.security.policy=/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/Oracle/Middleware/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/Oracle/Middleware/wlserver_10.3 -Dwls.home=/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/Oracle/Middleware/wlserver_10.3/server -Ddomain.home=/Oracle/Middleware/user_projects/domains/TBI -Dcommon.components.home=/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.domain.config.dir=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig -Doracle.server.config.dir=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/servers/staAdapter -Doracle.security.jps.config=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/carml -Digf.arisidstack.home=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/arisidprovider -Dweblogic.alternateTypesDirectory=/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=false -Dweblogic.management.server=t3://localhost:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Duser.timezone=UTC -Xrs -Dweblogic.MaxMessageSize=100000000 -Dweblogic.ext.dirs=/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/Oracle/Middleware/patch_jdev1112/profiles/default/sysext_manifest_classpath -Djps.app.credential.overwrite.allowed=true weblogic.Server
<Jan 24, 2013 9:29:16 PM UTC> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jan 24, 2013 9:29:17 PM UTC> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jan 24, 2013 9:29:17 PM UTC> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.0-b11 from Sun Microsystems Inc.>
<Jan 24, 2013 9:29:23 PM UTC> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Jan 24, 2013 9:29:24 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 24, 2013 9:29:24 PM UTC> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jan 24, 2013 9:29:24 PM UTC> <Notice> <Log Management> <BEA-170019> <The server log file /Oracle/Middleware/user_projects/domains/TBI/servers/staAdapter/logs/staAdapter.log is opened. All server side log events will be written to this file.>
<Jan 24, 2013 9:29:25 PM UTC> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that libmuxer library is in :'/Oracle/Middleware/jdk1.6.0_25/jre/lib/amd64/server:/Oracle/Middleware/jdk1.6.0_25/jre/lib/amd64:/Oracle/Middleware/jdk1.6.0_25/jre/../lib/amd64:/Oracle/Middleware/patch_wls1035/profiles/default/native:/Oracle/Middleware/patch_jdev1112/profiles/default/native:/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib'
>
<Jan 24, 2013 9:29:28 PM UTC> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jan 24, 2013 9:29:30 PM UTC> <Warning> <Store> <BEA-280101> <The persistent file store "_WLS_staAdapter" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<Jan 24, 2013 9:29:31 PM UTC> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at '/Oracle/Middleware/wlserver_10.3/server/lib/uddi.war'.>
<Jan 24, 2013 9:29:31 PM UTC> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at '/Oracle/Middleware/wlserver_10.3/server/lib/uddiexplorer.war'.>
<Jan 24, 2013 9:29:31 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jan 24, 2013 9:29:31 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
*<Jan 24, 2013 9:29:51 PM UTC> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>*
*<Jan 24, 2013 9:29:51 PM UTC> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>*
*<Jan 24, 2013 9:29:51 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>*
Good startup trace.....
Starting WLS with line:
/Oracle/Middleware/jdk1.6.0_25/bin/java -server -Xms2048m -Xmx2048m -XX:NewSizeThreadIncrease=200 -Dweblogic.ThreadPoolPercentSocketReaders=50 -XX:MaxPermSize=512m -Dweblogic.Name=staAdapter -Djava.security.policy=/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/Oracle/Middleware/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/Oracle/Middleware/wlserver_10.3 -Dwls.home=/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/Oracle/Middleware/wlserver_10.3/server -Ddomain.home=/Oracle/Middleware/user_projects/domains/TBI -Dcommon.components.home=/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.domain.config.dir=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig -Doracle.server.config.dir=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/servers/staAdapter -Doracle.security.jps.config=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/carml -Digf.arisidstack.home=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/arisidprovider -Dweblogic.alternateTypesDirectory=/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=false -Dweblogic.management.server=t3://localhost:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Duser.timezone=UTC -Xrs -Dweblogic.MaxMessageSize=100000000 -Dweblogic.ext.dirs=/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/Oracle/Middleware/patch_jdev1112/profiles/default/sysext_manifest_classpath -Djps.app.credential.overwrite.allowed=true weblogic.Server
<Jan 24, 2013 5:31:06 PM UTC> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jan 24, 2013 5:31:06 PM UTC> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jan 24, 2013 5:31:06 PM UTC> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.0-b11 from Sun Microsystems Inc.>
<Jan 24, 2013 5:31:07 PM UTC> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Jan 24, 2013 5:31:08 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 24, 2013 5:31:08 PM UTC> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jan 24, 2013 5:31:08 PM UTC> <Notice> <Log Management> <BEA-170019> <The server log file /Oracle/Middleware/user_projects/domains/TBI/servers/staAdapter/logs/staAdapter.log is opened. All server side log events will be written to this file.>
<Jan 24, 2013 5:31:09 PM UTC> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that libmuxer library is in :'/Oracle/Middleware/jdk1.6.0_25/jre/lib/amd64/server:/Oracle/Middleware/jdk1.6.0_25/jre/lib/amd64:/Oracle/Middleware/jdk1.6.0_25/jre/../lib/amd64:/Oracle/Middleware/patch_wls1035/profiles/default/native:/Oracle/Middleware/patch_jdev1112/profiles/default/native:/Oracle/Middleware/wlserver_10.3/server/native/linux/i686:/Oracle/Middleware/wlserver_10.3/server/native/linux/i686/oci920_8:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib'
>
<Jan 24, 2013 5:31:13 PM UTC> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jan 24, 2013 5:31:14 PM UTC> <Warning> <Store> <BEA-280101> <The persistent file store "_WLS_staAdapter" is forced to use buffered I/O and so may have significantly degraded performance. Either the OS/hardware environment does not support the chosen write policy or the native wlfileio library is missing. See store open log messages for the requested and final write policies. See the documentation on store synchronous write policy configuration for advice.>
<Jan 24, 2013 5:31:15 PM UTC> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at '/Oracle/Middleware/wlserver_10.3/server/lib/uddi.war'.>
<Jan 24, 2013 5:31:15 PM UTC> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at '/Oracle/Middleware/wlserver_10.3/server/lib/uddiexplorer.war'.>
<Jan 24, 2013 5:31:16 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jan 24, 2013 5:31:16 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
**<Jan 24, 2013 5:31:30 PM UTC> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>**
**<Jan 24, 2013 5:31:30 PM UTC> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>**
**<Jan 24, 2013 5:31:30 PM UTC> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of STA_cluster.>**
**<Jan 24, 2013 5:31:38 PM UTC> <Notice> <Cluster> <BEA-000142> <Trying to download cluster JNDI tree from server staEngine.>**
**<Jan 24, 2013 5:31:38 PM UTC> <Notice> <Cluster> <BEA-000164> <Synchronized cluster JNDI tree from server staEngine.>**
**<Jan 24, 2013 5:31:38 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>**
**<Jan 24, 2013 5:31:38 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>**Thanks. Unfortunately I've already done that and it doesn't work. I've included the -Xrs option in the managed server java command line arguments, see below. However, either it is in the wrong location on the java argument list or something else is going on, because it is not working. See the JVM command line below of the managed server.....
/Oracle/Middleware/jdk1.6.0_25/bin/java -server -Xms2048m -Xmx2048m -XX:NewSizeThreadIncrease=200 -Dweblogic.ThreadPoolPercentSocketReaders=50 -XX:MaxPermSize=512m -Dweblogic.Name=staAdapter -Djava.security.policy=/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.security.SSL.trustedCAKeyStore=/Oracle/Middleware/wlserver_10.3/server/lib/cacerts -da -Dplatform.home=/Oracle/Middleware/wlserver_10.3 -Dwls.home=/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/Oracle/Middleware/wlserver_10.3/server -Ddomain.home=/Oracle/Middleware/user_projects/domains/TBI -Dcommon.components.home=/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.domain.config.dir=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig -Doracle.server.config.dir=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/servers/staAdapter -Doracle.security.jps.config=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/carml -Digf.arisidstack.home=/Oracle/Middleware/user_projects/domains/TBI/config/fmwconfig/arisidprovider -Dweblogic.alternateTypesDirectory=/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=false -Dweblogic.management.server=t3://localhost:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Duser.timezone=UTC -Xrs -Dweblogic.MaxMessageSize=100000000 -Dweblogic.ext.dirs=/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/Oracle/Middleware/patch_jdev1112/profiles/default/sysext_manifest_classpath -Djps.app.credential.overwrite.allowed=true weblogic.Serve -
Oracle Management Server not starting up. says node manager is down!!!
Hi ALL,
We are trying to startup (OMS) Oracle Management Server but it's not starting up. it tries to connect to the node manager and says failed to connect to Node Manager as the node manager is not running.
OPMN also not running.
I have attached a snapshot so you can see.
PLEASE HELP
hi Again, below are the error reports
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR>weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at omkn-ms01.int.unisa.ac.za:7403.
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.socketConnect(Native Method)
2014-01-30 18:56:52,360 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at java.net.Socket.connect(Socket.java:529)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:228)
2014-01-30 18:56:52,361 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Attempt to connect to nm failed. Trying to start it...
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>status of node manager:
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
2014-01-30 18:56:52,362 [Thread-1] INFO commands.BaseCommand run.554 - <OUT>Not connected to Node Manager
2014-01-30 18:56:52,362 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
2014-01-30 18:56:52,363 [Thread-2] INFO commands.BaseCommand run.554 - <ERR> at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:172)
regards,
Ambrose.I assumethe node manager is not running on Exadata though you have posted in the Exadata forum !
how are you starting it. Are you using the gcstartup script within init.d ?
Thanks -
hi am trying to start my managed server in my WebLogic Server Version: 10.3.6.0 ,am on window 7 64 bit
i did this
startmy_managed_server
startManagedWebLogic my_managed_server admin-url
am geting this error
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Server VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -server -Xms256m -Xmx512m -XX:MaxPermSiz
e=256m -Dweblogic.Name=UAMOrganisation -Djava.security.policy=C:\Oracle\weblogic
\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.ProductionModeEnabled=true -D
weblogic.security.SSL.trustedCAKeyStore="C:\Oracle\weblogic\wlserver_10.3\server
\lib\cacerts" -Dweblogic.ProductionModeEnabled=true -da -Dplatform.home=C:\Or
acle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblo
gic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.management.discover=t
rue -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=f
alse -da -Dplatform.home=C:\Oracle\weblogic\WLSERV~1.3 -Dwls.home=C:\Oracle\web
logic\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\weblogic\WLSERV~1.3\server -
Dweblogic.management.discover=false -Dweblogic.management.server=
042:7001/console -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErro
rsToConsole=false -Dweblogic.ext.dirs=C:\Oracle\weblogic\patch_wls1036\profiles\
default\sysext_manifest_classpath;C:\Oracle\weblogic\patch_ocp371\profiles\defau
lt\sysext_manifest_classpath weblogic.Server
<30 Jan 2013 11:14:16 AM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
Provider self-integrity check for better startup performance. To enable this che
ck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<30 Jan 2013 11:14:16 AM> <Info> <Security> <BEA-090906> <Changing the default R
andom Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable thi
s change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<30 Jan 2013 11:14:16 AM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogi
c Server with Java HotSpot(TM) Server VM Version 19.1-b02 from Sun Microsystems
Inc.>
<30 Jan 2013 11:14:17 AM> <Critical> <Security> <BEA-090518> <Could not decrypt
the username attribute value of {AES}flybGG5XGOjo6+JZZiBAw8h1xLDtftT1E5JWJIRwkeA
= from the file C:\Oracle\weblogic\user_projects\domains\base_domain\servers\UAM
Organisation\security\boot.properties. If you have copied an encrypted attribute
from boot.properties from another domain into C:\Oracle\weblogic\user_projects\
domains\base_domain\servers\UAMOrganisation\security\boot.properties, change the
encrypted attribute to its cleartext value then reboot the server. The attribut
e will be re-encrypted. Otherwise, change all encrypted attributes to their clea
rtext values, then reboot the server. All encryptable attributes will be re-encr
ypted. The decryption failed with the exception weblogic.security.internal.encry
ption.EncryptionServiceException.>
<30 Jan 2013 11:14:17 AM> <Critical> <Security> <BEA-090518> <Could not decrypt
the password attribute value of {AES}nT1TFMpXWYCfRUQdt0wdbFheQQKERbIKxOMIzT3ZD3k
= from the file C:\Oracle\weblogic\user_projects\domains\base_domain\servers\UAM
Organisation\security\boot.properties. If you have copied an encrypted attribute
from boot.properties from another domain into C:\Oracle\weblogic\user_projects\
domains\base_domain\servers\UAMOrganisation\security\boot.properties, change the
encrypted attribute to its cleartext value then reboot the server. The attribut
e will be re-encrypted. Otherwise, change all encrypted attributes to their clea
rtext values, then reboot the server. All encryptable attributes will be re-encr
ypted. The decryption failed with the exception weblogic.security.internal.encry
ption.EncryptionServiceException.>
Enter username to boot WebLogic server:weblogic
<30 Jan 2013 11:14:22 AM> <Info> <Management> <BEA-141107> <Version: WebLogic Se
rver 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<30 Jan 2013 11:14:23 AM> <Info> <Management> <BEA-141223> <The server name UAMO
rganisation specified with -Dweblogic.Name does not exist. The configuration inc
ludes the following servers {AdminServer,AdminServer1,AdminServer3,UamOrganisati
on}.>
<30 Jan 2013 11:14:23 AM> <Critical> <WebLogicServer> <BEA-000362> <Server faile
d. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name UAMO
rganisation specified with -Dweblogic.Name does not exist. The configuration inc
ludes the following servers {AdminServer,AdminServer1,AdminServer3,UamOrganisati
on}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(Runtim
eAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
imeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
<30 Jan 2013 11:14:23 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FAILED>
<30 Jan 2013 11:14:23 AM> <Error> <WebLogicServer> <BEA-000383> <A critical serv
ice failed. The server will shut itself down>
<30 Jan 2013 11:14:23 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FORCE_SHUTTING_DOWN>i do have boot.properties in C:\Oracle\weblogic\user_projects\domains\base_domain\servers\AdminServer\security and in C:\Oracle\weblogic\user_projects\domains\base_domain\servers\UAMOrganisation\Security
Edited by: adf009 on 2013/01/30 12:05 PM
Edited by: adf009 on 2013/01/30 12:15 PM
Edited by: adf009 on 2013/01/30 12:21 PM
Edited by: adf009 on 2013/01/30 1:25 PMya i did see that now am geting this error
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Server VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -server -Xms256m -Xmx512m -XX:MaxPermSiz
e=256m -Dweblogic.Name=UamOrganisation -Djava.security.policy=C:\Oracle\weblogic
\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.ProductionModeEnabled=true -D
weblogic.security.SSL.trustedCAKeyStore="C:\Oracle\weblogic\wlserver_10.3\server
\lib\cacerts" -Dweblogic.ProductionModeEnabled=true -da -Dplatform.home=C:\Or
acle\MIDDLE~1\WLSERV~1.1 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblo
gic.home=C:\Oracle\MIDDLE~1\WLSERV~1.1\server -Dweblogic.management.discover=t
rue -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=f
alse -da -Dplatform.home=C:\Oracle\weblogic\WLSERV~1.3 -Dwls.home=C:\Oracle\web
logic\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\weblogic\WLSERV~1.3\server -
Dweblogic.management.discover=false -Dweblogic.management.server=http:/7001/console -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErro
rsToConsole=false -Dweblogic.ext.dirs=C:\Oracle\weblogic\patch_wls1036\profiles\
default\sysext_manifest_classpath;C:\Oracle\weblogic\patch_ocp371\profiles\defau
lt\sysext_manifest_classpath weblogic.Server
<30 Jan 2013 11:40:02 AM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE
Provider self-integrity check for better startup performance. To enable this che
ck, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<30 Jan 2013 11:40:02 AM> <Info> <Security> <BEA-090906> <Changing the default R
andom Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable thi
s change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<30 Jan 2013 11:40:02 AM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogi
c Server with Java HotSpot(TM) Server VM Version 19.1-b02 from Sun Microsystems
Inc.>
<30 Jan 2013 11:40:03 AM> <Critical> <Security> <BEA-090518> <Could not decrypt
the username attribute value of {AES}flybGG5XGOjo6+JZZiBAw8h1xLDtftT1E5JWJIRwkeA
= from the file C:\Oracle\weblogic\user_projects\domains\base_domain\servers\Uam
Organisation\security\boot.properties. If you have copied an encrypted attribute
from boot.properties from another domain into C:\Oracle\weblogic\user_projects\
domains\base_domain\servers\UamOrganisation\security\boot.properties, change the
encrypted attribute to its cleartext value then reboot the server. The attribut
e will be re-encrypted. Otherwise, change all encrypted attributes to their clea
rtext values, then reboot the server. All encryptable attributes will be re-encr
ypted. The decryption failed with the exception weblogic.security.internal.encry
ption.EncryptionServiceException.>
<30 Jan 2013 11:40:03 AM> <Critical> <Security> <BEA-090518> <Could not decrypt
the password attribute value of {AES}nT1TFMpXWYCfRUQdt0wdbFheQQKERbIKxOMIzT3ZD3k
= from the file C:\Oracle\weblogic\user_projects\domains\base_domain\servers\Uam
Organisation\security\boot.properties. If you have copied an encrypted attribute
from boot.properties from another domain into C:\Oracle\weblogic\user_projects\
domains\base_domain\servers\UamOrganisation\security\boot.properties, change the
encrypted attribute to its cleartext value then reboot the server. The attribut
e will be re-encrypted. Otherwise, change all encrypted attributes to their clea
rtext values, then reboot the server. All encryptable attributes will be re-encr
ypted. The decryption failed with the exception weblogic.security.internal.encry
ption.EncryptionServiceException.>
Enter username to boot WebLogic server:weblogic
<30 Jan 2013 11:40:08 AM> <Info> <Management> <BEA-141107> <Version: WebLogic Se
rver 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<30 Jan 2013 11:40:09 AM> <Emergency> <Management> <BEA-141151> <The admin serve
r could not be reached at 7001/console.>
<30 Jan 2013 11:40:09 AM> <Info> <Configuration Management> <BEA-150018> <This s
erver is being started in managed server independence mode in the absence of the
admin server.>
<30 Jan 2013 11:40:09 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to STARTING>
<30 Jan 2013 11:40:09 AM> <Info> <WorkManager> <BEA-002900> <Initializing self-t
uning thread pool>
<30 Jan 2013 11:40:09 AM> <Notice> <Log Management> <BEA-170019> <The server log
file C:\Oracle\weblogic\user_projects\domains\base_domain\servers\UAMOrganisati
on\logs\UamOrganisation.log is opened. All server side log events will be writte
n to this file.>
<30 Jan 2013 11:40:09 AM> <Error> <Socket> <BEA-000438> <Unable to load performa
nce pack. Using Java I/O instead. Please ensure that wlntio.dll is in: 'C:\Oracl
e\MIDDLE~1\JDK160~1\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows
;C:\Oracle\weblogic\patch_wls1036\profiles\default\native;C:\Oracle\weblogic\pat
ch_ocp371\profiles\default\native;C:\Oracle\weblogic\WLSERV~1.3\server\native\wi
n\x64;C:\Oracle\weblogic\WLSERV~1.3\server\bin;C:\Oracle\weblogic\modules\ORGAPA
~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\
OracleClient32;C:\app\10017134\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome\jdk\j
re\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSuiteHome\jdk\jre\bin\client;C:
\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.4.2\bin\client;C:\D
evSuiteHome\jre\1.4.2\bin;C:\DevSuiteHome;C:\app\10017134\product\11.2.0\dbhome_
1;C:\Windows\System32;C:\Windows;C:\DevSuiteHome\BIN;C:\app\10017134\product\11.
2.0\dbhome_1\NETWORK\ADMIN;C:\Oracle\Middleware\jdk160_24;C:\Oracle\weblogic\WLS
ERV~1.3\server\native\win\x64\oci920_8'
>
<30 Jan 2013 11:40:11 AM> <Notice> <Security> <BEA-090082> <Security initializin
g using security realm myrealm.>
<30 Jan 2013 11:40:11 AM> <Critical> <Security> <BEA-090402> <Authentication den
ied: Boot identity not valid; The user name and/or password from the boot identi
ty file (boot.properties) is not valid. The boot identity may have been changed
since the boot identity file was created. Please edit and update the boot identi
ty file with the proper values of username and password. The first time the upda
ted boot identity file is used to start the server, these new values are encrypt
ed.>
<30 Jan 2013 11:40:11 AM> <Critical> <WebLogicServer> <BEA-000386> <Server subsy
stem failed. Reason: weblogic.security.SecurityInitializationException: Authenti
cation denied: Boot identity not valid; The user name and/or password from the b
oot identity file (boot.properties) is not valid. The boot identity may have bee
n changed since the boot identity file was created. Please edit and update the b
oot identity file with the proper values of username and password. The first tim
e the updated boot identity file is used to start the server, these new values a
re encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot i
dentity not valid; The user name and/or password from the boot identity file (bo
ot.properties) is not valid. The boot identity may have been changed since the b
oot identity file was created. Please edit and update the boot identity file wit
h the proper values of username and password. The first time the updated boot id
entity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Auth
entication Failed: User weblogic javax.security.auth.login.LoginException: [Secu
rity:090301]Password Not Supplied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.log
in(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(Log
inModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(Log
inModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<30 Jan 2013 11:40:11 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FAILED>
<30 Jan 2013 11:40:11 AM> <Error> <WebLogicServer> <BEA-000383> <A critical serv
ice failed. The server will shut itself down>
<30 Jan 2013 11:40:11 AM> <Notice> <WebLogicServer> <BEA-000365> <Server state ci change the boot.properties in C:\Oracle\weblogic\user_projects\domains\base_domain\servers\UAMOrganisation\Security and also in C:\Oracle\weblogic\user_projects\domains\base_domain\servers\AdminServer\security
Edited by: adf009 on 2013/01/30 12:49 PM
Edited by: adf009 on 2013/01/30 1:15 PM
Edited by: adf009 on 2013/01/30 1:19 PM -
Weblogic Managed Server not starting from the ./startManagedWebLogic.sh
We have installed weblogic 9.2 in unix environment, and created one admin server and a managed server
My admin server is in running state, while starting the managed server, the folllowing message is showing
<Jun 18, 2010 1:30:45 PM BST> <Info> <MessagingBridge> <BEA-200001> <The messaging bridge service has successfully shut down.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JMS> <BEA-040308> <JMS service is suspending.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JMS> <BEA-040107> <Undeployed 8 default connection factories.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JMS> <BEA-040015> <JMS shutdown is complete.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001144> <Force Suspending the JDBC service.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001146> <Force suspend of the JDBC service completed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001147> <Shutting down the JDBC service.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001149> <Shutdown of the JDBC service completed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <Cluster> <BEA-000103> <Disconnecting fromcluster dcsCLSv1>
<Jun 18, 2010 1:30:45 PM BST> <Info> <WebLogicServer> <BEA-000236> <Stopping execute threads.>
I have started my server in the following ways.
from the weblogic/user_projects/V1.3.0/dsDOMv/bin directory
bash-3.00$ ./startManagedWebLogic.sh dREGv1
bash-3.00$ tail -f /weblogic/user_projects/V1.3.0/dsDOMv/logs/dREGv1startWeblogic.sh
We have configured commomn user name for all admin and managed servers.
Please reply.........The following is the managed server logs. i have stoped the server manually from weblogic console( from control tab and click on shutdown by force) om 18th June at 1:30:37. The following is the managed servers log
<Jun 18, 2010 1:30:37 PM BST> <Info> <Server> <BEA-002640> <A request has been received to force shut down of the server.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Server> <BEA-002638> <Force shutdown was issued remotely from 127.0.0.1>
<Jun 18, 2010 1:30:37 PM BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
<Jun 18, 2010 1:30:37 PM BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Cluster> <BEA-000158> <Server has stopped sending cluster heartbeats and announcements. It is still receiving heartbeats and announcements from other cluster members.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module scheduler.jar of application scheduler is transitioning from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149060> <Module scheduler.jar of application scheduler successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module /edcsschedulerapp of application scheduler is transitioning from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149060> <Module /edcsschedulerapp of application scheduler successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module edcsejb.jar of application coreedcs is transitioning from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149060> <Module edcsejb.jar of application coreedcs successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module /edcsapp of application coreedcs is transitioning from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149060> <Module /edcsapp of application coreedcs successfully transitioned from STATE_ACTIVE to STATE_ADMIN on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jun 18, 2010 1:30:37 PM BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Jun 18, 2010 1:30:37 PM BST> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.235.3.40:7221 was shutdown.>
<Jun 18, 2010 1:30:37 PM BST> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 156.150.200.190:7221 was shutdown.>
<Jun 18, 2010 1:30:37 PM BST> <Notice> <Server> <BEA-002607> <Channel "Default[2]" listening on 127.0.0.1:7221 was shutdown.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <WebLogicServer> <BEA-000256> <Invoking bea.jolt.pool.servlet.weblogic.PoolManagerShutDown.main(null)>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Diagnostics> <BEA-320002> <The Diagnostics subsystem is stopping on Server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <JMX> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://10.235.3.40:7221/jndi/weblogic.management.mbeanservers.runtime .>
<Jun 18, 2010 1:30:37 PM BST> <Info> <WebService> <BEA-220028> <Web Service reliable agents are suspended.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <WebService> <BEA-220029> <Web Service reliable agents are shut down.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <SAFService> <BEA-281004> <SAF Service has been suspended.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <SAFService> <BEA-281005> <SAF Service has been shut down.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module scheduler.jar of application scheduler is transitioning from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149060> <Module scheduler.jar of application scheduler successfully transitioned from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module /edcsschedulerapp of application scheduler is transitioning from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <ServletContext-/edcsschedulerapp> <000000> <Closing Spring root WebApplicationContext>
<Jun 18, 2010 1:30:37 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/webapp/edcsschedulerapp/17126420/comp). Unbinding it.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149060> <Module /edcsschedulerapp of application scheduler successfully transitioned from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:37 PM BST> <Info> <Deployer> <BEA-149059> <Module edcsejb.jar of application coreedcs is transitioning from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <Deployer> <BEA-149060> <Module edcsejb.jar of application coreedcs successfully transitioned from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <Deployer> <BEA-149059> <Module /edcsapp of application coreedcs is transitioning from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <ServletContext-/edcsapp> <000000> <Closing Spring root WebApplicationContext>
<Jun 18, 2010 1:30:43 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/webapp/edcsapp/14679463/comp). Unbinding it.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <Deployer> <BEA-149060> <Module /edcsapp of application coreedcs successfully transitioned from STATE_ADMIN to STATE_PREPARED on server dcsREGv1.>
<Jun 18, 2010 1:30:43 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/ejb/scheduler.jar#EDCSSchedulerTransManagerBean/comp). Unbinding it.>
<Jun 18, 2010 1:30:43 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/ejb/edcsejb.jar#EDCSREFMessageListenerBean/comp). Unbinding it.>
<Jun 18, 2010 1:30:43 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/ejb/edcsejb.jar#EDCSEventTransManagerBean/comp). Unbinding it.>
<Jun 18, 2010 1:30:43 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/ejb/edcsejb.jar#EDCSERSMessageListenerBean/comp). Unbinding it.>
<Jun 18, 2010 1:30:43 PM BST> <Debug> <J2EE> <BEA-160058> <Warning : BindingTransactionSynchronizationRegistry still exists for Context :EventContext (app/ejb/edcsejb.jar#EDCSReportMessageListenerBean/comp). Unbinding it.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JMS> <BEA-040324> <JMSServer "InMemoryObjectJMSServerREGv1" is suspending.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JMS> <BEA-040325> <JMSServer "InMemoryObjectJMSServerREGv1" is suspended.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JMS> <BEA-040324> <JMSServer "ERSJMSServer" is suspending.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JMS> <BEA-040325> <JMSServer "ERSJMSServer" is suspended.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001514> <Destroying Data Source dcsDSdiagReadOnly.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001515> <Data Source dcsDSdiagReadOnly has been successfully destroyed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001508> <Destroying Connection Pool dcsDSdiagReadOnly.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:43 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiagReadOnly" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001126> <Destroyed Connection Pool named dcsDSdiagReadOnly.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001514> <Destroying Data Source dcsDSdiag.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001515> <Data Source dcsDSdiag has been successfully destroyed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001508> <Destroying Connection Pool dcsDSdiag.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "dcsDSdiag" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001126> <Destroyed Connection Pool named dcsDSdiag.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001514> <Destroying Data Source InMemoryJDBCDataSource.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001515> <Data Source InMemoryJDBCDataSource has been successfully destroyed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001508> <Destroying Connection Pool InMemoryJDBCDataSource.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:44 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001128> <Connection for pool "InMemoryJDBCDataSource" closed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001126> <Destroyed Connection Pool named InMemoryJDBCDataSource.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <MessagingBridge> <BEA-200001> <The messaging bridge service has successfully shut down.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JMS> <BEA-040308> <JMS service is suspending.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JMS> <BEA-040107> <Undeployed 8 default connection factories.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JMS> <BEA-040015> <JMS shutdown is complete.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001144> <Force Suspending the JDBC service.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001146> <Force suspend of the JDBC service completed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001147> <Shutting down the JDBC service.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <JDBC> <BEA-001149> <Shutdown of the JDBC service completed.>
<Jun 18, 2010 1:30:45 PM BST> <Info> <Cluster> <BEA-000103> <Disconnecting from cluster dcsCLSv1>
<Jun 18, 2010 1:30:45 PM BST> <Info> <WebLogicServer> <BEA-000236> <Stopping execute threads.>
But i tried to restart the server today(21st may).
From the admin server log says the following.
[JMSMigrate] : Current hosting server dcsREGv1 is down
[JMSMigrate] : Try to migrate...
[JMSMigrate] : Candidate server dcsREGv1 is not runing
[JMSMigrate] : Start Sleeping.......... End Sleeping
Yes, Managed Server and AdminServer resides on the Same Physical Box.
Thansk in advance..... -
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
-
Managed server not starting on Weblogic 10.3.6 IBM AIX 7.1
Hi. When i try starting managed server on weblogic 10.3.6 i get this error:
<02-Mar-2015 17:13:25 o'clock EET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.SecurityException: Unable to locate a login configuration
java.lang.SecurityException: Unable to locate a login configuration
at com.sun.security.auth.login.ConfigFile.getAppConfigurationEntry(ConfigFile.java:221)
at com.bea.common.security.jdkutils.JAASConfiguration.getAppConfigurationEntry(JAASConfiguration.java:87)
at javax.security.auth.login.LoginContext.init(LoginContext.java:272)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:438)
at com.bea.common.security.internal.service.JAASLoginServiceImpl$1.run(JAASLoginServiceImpl.java:101)
Truncated. see log file for complete stacktracedunnsoftinc wrote:
During the initial pass, I decided to leave this password null in both places, which is documented within the peopletools 8.53.00 installation guide. Maybe, it's time to further test. Thank you Nicolas.To be honest I've never tried to leave it blank in previous releases, thought that was mandatory (it was not prompted in psadmin menu as it is with PT8.53).
I don't have a PTools 8.53 instance in hands right now, but after a quick test over here on PT8.51, I have the same issue as yours.
Let me also remind you that there are two separate scenarios that may be received via the sign-on page:
1.) "The application server is down" status message without the "bea.jolt.ServiceException: TPESVCERR - server error while handling request" error.
2.) "The application server is down" status message including the "bea.jolt.ServiceException: TPESVCERR - server error while handling request" error.As I said earlier, you should get more clue in the webserver logfiles.
Nicolas. -
What causes a managed server to start or not to start
Hi,
I'm investigating a problem we have with an environment where a managed server was not running after the machine was restarted. Now I am testing it on a standalone testing environment and I can boot the machine and everything is starting automatically. Is a node manager configured automatically to start a managed server by default when installing weblogic? Until now we mostly started the managed server through the console. We use WLS 8.1.
Regards, Jos van der BurgtHi,
I'm investigating a problem we have with an environment where a managed server was not running after the machine was restarted. Now I am testing it on a standalone testing environment and I can boot the machine and everything is starting automatically. Is a node manager configured automatically to start a managed server by default when installing weblogic? Until now we mostly started the managed server through the console. We use WLS 8.1.
Regards, Jos van der Burgt -
Re Post: Http server cannot start after running the following JSP
Hi,
I have 9iAS 1.0.2.2 and it has been working fine.
My http server was running fine until I ran the following Jsp. Now I cannot start the Http server at all.
I check the Oracle home and the path and make sure they match (i.e. if my Oracle Home is iSuites, I have the PATH variable: c:\oracle\isuites\bin as the 1st one. And I reboot the system after I changed the Oracle Home, check the PATH variable etc.)
I also check the oci.dll files, and I have the oci.dll file in the following directories:
c:\oracle\ora81\BIN 87KB
c:\oracle\806\BIN 38KB
c:\oracle\iSuites\BIN 87KB
I check the Registry (regedit) and found that I have ORACLE_HOME_KEY for ora81 home, iSuites home, but not
806 home. And there are oracle.key files in c:\oracle\ora81\bin, c:\oracle\806\bin, c:\oracle\isuites\bin .
The contents of oracle.key in c:\oracle\ora81\bin and c:\oracle\isuites\bin are correct (i.e. "Software\ORACLE\HOME0" "Software\ORACLE\HOME2" respectively.) However, the content in c:\oracle\806\bin is "Software\ORACLE" .
Will this be a problem because there is no corresponding ORACLE_HOME_KEY for 806 in regedit?
OR
the OCI.DLL file is corrupted in one of the above directory.
Below is the JSP code that I ran. Before that, my HTTP server is started correctly.
I really appreciate if someone could give me some pointers about this.
I also suspect that when the HTTP server was brought down for some reasons and it was not a clean shutdown.
So how can I shutdown the http server cleanly before restarting that?
Thanks;
Kelly.
<%@ page language="sqlj"
import="sqlj.runtime.ref.DefaultContext,oracle.sqlj.runtime.Oracl
e" %>
<HTML>
<HEAD> <TITLE> The SQLJQuery JSP </TITLE> </HEAD>
<BODY BGCOLOR="white">
<% String empno = request.getParameter("empno");
if (empno != null) { %>
<H3> Employee # <%=empno %> Details: </H3>
<%= runQuery(empno) %>
<HR><BR>
<% } %>
<B>Enter an employee number:</B>
<FORM METHOD="get">
<INPUT TYPE="text" NAME="empno" SIZE=10>
<INPUT TYPE="submit" VALUE="Ask Oracle");
</FORM>
</BODY>
</HTML>
<%!
private String runQuery(String empno) throws
java.sql.SQLException {
DefaultContext dctx = null;
String ename = null; double sal = 0.0; String hireDate = null;
StringBuffer sb = new StringBuffer();
try {
dctx = Oracle.getConnection("jdbc:oracle:oci8:@", "scott",
"tiger");
#sql [dctx] {
select ename, sal, TO_CHAR(hiredate,'DD-MON-YYYY')
INTO :ename, :sal, :hireDate
FROM scott.emp WHERE UPPER(empno) = UPPER(:empno)
sb.append("<BLOCKQUOTE><BIG><B><PRE>\n");
sb.append("Name : " + ename + "\n");
sb.append("Salary : " + sal + "\n");
sb.append("Date hired : " + hireDate);
sb.append("</PRE></B></BIG></BLOCKQUOTE>");
} catch (java.sql.SQLException e) {
sb.append("<P> SQL error: <PRE> " + e + " </PRE> </P>\n");
} finally {
if (dctx!= null) dctx.close();
return sb.toString();
%>I had this problem and the pkgchk mentioned above helped to get the admin server going (thanks!) but I could not run the admin console. I saw:
Exception in thread "main" java.lang.UnsupportedClassVersionError: org/GNOME/Accessibility/JavaBridge (Unsupported major.minor version 49.0)
It turned out that something (I suspect the patch) had replaced my java1.5.0_06 binary with a java1.4.2_03 binary - but left the java1.5 directory structure alone! i.e. looking in /usr/jdk would have indicated that java1.5 was installed, but when I ran jdk1.5.0_06/bin/java -version , it reported java version "1.4.2_03". I was unimpressed.
I ended up removing all the SUNWj5* packages and reinstalling them and then I could start the admin console.
Now to find out what other damage this patch might have caused..... -
SOA Managed Server -- STATE -- Admin
Hello Experts:
Env:
Sun Solaris 10
Web Logic 10.3.6
SOA 11.1.1.6.0
2 Node cluster
Installed WLS and SOA. Config went well. When I start SOA Managed server, the STATE is "Admin". The issue is SAME when starting SOA in Command line as well as Console.
When I use Console and try for "resume" it goes to "Active" STATE. How to fix this issue??
I must be able to start SOA from Console and it should go to "Active" state. Can you please help me to fix this??
Any help is appreciated.
Thanks
Rgds
NatrajanNatrajan,
One of the reasons for the managed server to go to ADMIN state is due to the failed deployments.
The failed deployments can be the failed deployments of the application(.war,.ear files) or due to failure in the creation of JDBC Resources/JMS Resources.
Please check in the logs if the managed server reports of any failed deployments.
Regards,
Abhinav Gupta
Maybe you are looking for
-
Key figure values in MC$K not updated
Hi I have a situation where I run transaction MC$K (Material Analysis: On-time delivery: statistics): At first I had not done any config in transaction MCFC for the deviation of delivery date. So when I ran MC$K, the delivery date variance key figure
-
Internal Order Report S_ALR_87012993 showing settled cost
HI , The issue here is related to IO report S_ALR_87012993 showing up settled cost against a particular Cost Element/GL account. However when we use the drill down function it says "No actual Line Item exist". I have checked the line item details fo
-
My ipad is "stuck on the above mentioned message! I hit ok, but nothing happens!! I can even turn it off... or use it!!!! What do I need to do????
-
N73 turn off and can't turn on after firware updat...
Hi I updated my firmware on N73 but i didn't notice that went it was uodating, the phone turn off by itself( i didn't notice) i try to turn back on but still no response...what happen guys?I follow all the step...but no avail
-
The URL in the web interface builder
Hi In the web interface builder in BPS there are several components. When I click on them one by one I can see the planning functions and other details. There is a URL present in the web interface builder which corresponds to upload flat file data. H