Managed servers cache not updated when we deploy a new EAR....

Hi All,
I have the following query :
Perform the following steps :
1. Stop the managed servers
2. Delete and create jms servers
3. Undeploy existing EARs
4. Deploy new EARs
5. Start the managed servers
If we perform these steps we see that the managed server cache normally get a copy of the new EARs from the admin server.
However if we modify the above steps as :
1. Stop the managed servers
2. Delete and create jms servers
3. Undeploy existing EARs
4. Deploy new EARs
5. Re-do step #2, i.e. delete and create jms servers
6. Start the managed servers
This time the managed server's cache is not updated with the new EAR file when it starts up.
Any idea as to why this behaviour....also the EAR could be a small sample MDB application from weblogic.
We deploy these app via java weblogic.Deployer command.
Any thoughts ..would be highly appreciated ....
Regards,
Stacey.
Edited by: stacey on Jun 22, 2010 8:35 PM

Hi Stacey,
Did you check the EAR copy cached before doing Setp 5
("5. Re-do step #2, i.e. delete and create jms servers")
Can you confirm once.
Regards,
Kal.

Similar Messages

PI 7.1 - CPA Cache not updated with directory data.

Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
   <CacheRefreshError>
      <EngineType>
      AE
      </EngineType>
      <EngineName>
      af.sxd.mchir134
      </EngineName>
      <RefreshMode>
      C
      </RefreshMode>
      <GlobalError>
         <Message>
         CPA Cache not updated with directory data.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
      <GlobalError>
         <Message>
         Confirmation handling failed.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
   </CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
Surendra

Guys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards

IPod will not update when plugged into computer?

Just recently my iPod with not update when I plug it into my computer. My iPod does not show up on my Mac or my iTunes. When I plug it in the screen shows the do not disconnect sign. I have tried to reset my iPod and checked for new updates, but they haven't worked. If anyone knows what to do that would be great.
Thanks

Yes. Since I installed the new system software (10.4.6) update Sunday night, I cannot update any of my iPods except the iPod video. The iPods also do not show up on my desktop. The battery charges but that's all that happens.

HT1277 Mail on my Mac computer does not update when I update my mail on my phone and iPad. Can anyone help me with this? Is there a setting I need to check?

Mail on my Mac computer does not update when I update my mail on my iPhone and iPad. Can anyone help me with this? Is there a setting that I need to check?

All that you had to do was to sign into the old account in order to update those apps. What I mean is that you just needed to sign into that account in the store settings like I described and that should have worked. You didnt need to enter the credit card information again - you justed needed to use the old ID and password.
Anyway, I think the good news is that if everything else is OK with the new account, just download iBooks with the new ID - it's a free app so its not like you have to pay for it again. I'm not sure what the other App is that you are talking about - but if it is the Apple Store App - that is free as well.
Try this anyway, when you try to update iBooks, just use the old password if the old ID still pops up.
Did you try signing into the store settings with your new ID and see what happens with the updates then?

Why the PO action history is not updating when i perform the vacation rules

Hi,
Can any one explain why the action history is not updating when performed the vacation rules using the below example
Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
Note:we are using the 11.5.10.2 version.
The Action History in the following manner
Seq Action Performed By
================================
4 Approve C
3 Forward B
2 Reserved B
1 Forward A
0 Submit A
From the above action history why the user D name is not showing. Can any one let me know ASAP?
Regards,
Keivn.
Edited by: user10960960 on May 5, 2009 3:36 AM

When you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
Hope this helps,
Sandeep Gandhi

ITunes play count does not update when iPod is connected

iTunes keeps track of how many times i play the song on my computer but does not update when I connect my iPod. Is there a way to fix this??
thanks!!

I just checked and it does update for me. I'm still waiting to see if it updates from the AppleTV though.

Content does not update when published

My content is not updating when I publish updates to my app. Side loading shows the updates, but an updated published folio doesn't. On the third try, I got a blank light grey screen. I finally had to unpublish and republish the content, which is obviously not an ideal situation.
Are there any known bugs or problems at the moment that could be causing this issue? The DPS Status page doesn't have any info.
Thanks
-Scott

I'm not aware of a way to get out of this state cleanly. Uninstalling and reinstalling the app fixes the problem (unless your unpublish/republish again), but it's difficult to tell your customers to uninstall/reinstall. Another option is to unpublish and then publish the affected folios as different folios, but then some of your users will end up with two versions of a similar folio until they archive the older version.
Let me ask around to make sure that I'm correct about the cause and to see if there's a cleaner workaround.

My iPod touch 5th generation battery indicator does not update when being charged (Updated to iOS 8)

Note that the iPod touch 5th generation was updated to iOS 8. When I connect my charger to my iPod touch, for the first time, the battery indicator does not update when connected to a power source. Instead of being charged, it says that the battery is being depleted. Please fix this issue. Thank you!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them). I think this started with Maverick? Any solutions?

My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them). I think this started with Maverick? Any solutions?

one is gmail, one is a university email and they are both IMAP accounts (not that I know what that means)....

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Text not updated when changing the ResourceBundle

this is an abstraction of what i have on my code:
controller
public class controller extends VBox{
     @FXML protected Label ex2;
     public CtrlMainMenu() throws Exception{
          FXMLLoader fxmlLoader = new FXMLLoader(getClass().getResource("/view/View.fxml"));
          fxmlLoader.setController(this);
          fxmlLoader.setRoot(this);
          fxmlLoader.setResources(CtrlLanguage.resource);
          fxmlLoader.load();
     @Override public void initialize(URL arg0, ResourceBundle arg1) {
          ex2.setText(arg1.getString("ex2"));
}View
<fx:root type="VBox" xmlns:fx="http://javafx.com/fxml">
     <children>
          <Label text="%ex1"/>
          <Label fx:id="ex2"/>
     <children>
</fx:root>Language controller
public class CtrlLanguage{
     private static String PATH =
          new File(
               CtrlImageLoader.class.getProtectionDomain().getCodeSource().getLocation().getPath()
          ).getParentFile().getPath() + "/language/";
     public static ResourceBundle resource;
     public static void setLanguage(String file) throws Exception{
          try {
               if(new File(PATH + file).exists())
                    resource = new PropertyResourceBundle(new FileInputStream(PATH + file));
               else
                    resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/"+file));
          } catch (Exception e) {
               resource = new PropertyResourceBundle(CtrlLanguage.class.getResourceAsStream("/language/EN"));
     public static String get(String key){
          try {
               return resource.getString(key);
          } catch (Exception e) {
               return key;
}problem comes when I try to change the language without changing the current root
the elements of the view are not updated when the bundle is changed (CtrlLanguage.setLanguage("file");) until the root is changed/loaded again
is there any way so i can make the content change without having to reload again the root?

A method which returns an instance of the following class:
* A localizable read only property for internationalization of string properties.
* @author Christian Schudt
public final class LocalizableStringProperty extends ReadOnlyStringProperty {
    private String resourceKey;
    private StringProperty text;
    private String baseName;
    private ClassLoader classLoader;
    // Keep the listener as hard reference in the class, so that it won't get GCed, until this class has no references any more.
    private ChangeListener<Locale> changeListener;
    public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey) {
        this(localeManager, baseName, resourceKey, null);
    public LocalizableStringProperty(LocaleManager localeManager, String baseName, String resourceKey, ClassLoader classLoader) {
        changeListener = new ChangeListener<Locale>() {
            @Override
            public void changed(ObservableValue<? extends Locale> observableValue, Locale locale, Locale locale1) {
                localeChanged(locale1);
        localeManager.localeProperty().addListener(new WeakChangeListener<Locale>(changeListener));
        this.baseName = baseName;
        this.classLoader = classLoader;
        this.resourceKey = resourceKey;
        text = new SimpleStringProperty();
        localeChanged(localeManager.getLocale());
    private void localeChanged(Locale locale) {
        ResourceBundle resourceBundle;
        Locale.setDefault(locale);
        if (classLoader == null) {
            resourceBundle = ResourceBundle.getBundle(baseName, locale);
        } else {
            resourceBundle = ResourceBundle.getBundle(baseName, locale, classLoader);
        text.set(resourceBundle.getString(resourceKey));
    @Override
    public String get() {
        return text.get();
    @Override
    public Object getBean() {
        return text.getBean();
    @Override
    public String getName() {
        return text.getName();
    @Override
    public void addListener(ChangeListener<? super String> changeListener) {
        text.addListener(changeListener);
    @Override
    public void removeListener(ChangeListener<? super String> changeListener) {
        text.removeListener(changeListener);
    @Override
    public void addListener(InvalidationListener invalidationListener) {
        text.addListener(invalidationListener);
    @Override
    public void removeListener(InvalidationListener invalidationListener) {
        text.removeListener(invalidationListener);
}

Deployment of new EAR not successful as changes are invisible

Hi,
Our application is deployed as an EAR, which internally consists of JARs and EJBs. We do not have a control on the code as it is provided by a third party vendor.
Until recently we were using Welogic 9.2 and everytime we get a new EAR, we replace the old file on the filesystem with the new one and then Stop-Start the Admin server using backend scripts and the changes would be visible.
We recently upgraded to Weblogic 10.3 and were able to deploy the existing EAR without any issues. When the time came to replace the EAR, the same action mentioned above doesn't seem to work. While the application startsup fine, the changes aren't visible and it seems as though the deployment is still pointing to the old EAR. We have verified that the deployment is pointing to the correct EAR and also tried this a couple of times, but without any luck.
The console and AdminServer logs are also clean. I also checked the documentation to verify if the deployment process has changed, but couldn't notice any relevant updates.
Please let me know if I am missing some step or if you have any suggestions.
Regards,
Raghu

Hi,
Thanks for your suggestions.
When I had first replaced the EAR - I had restarted the app server and it looked like the application had been installed successfully. Then I remember performing an "Update" and it failed due to "PermGen space". Then I deleted and installed the application again and it worked fine.
Since delete/install re-deploys the application, I thought that it had worked fine and ignored the "PermGen space" error. But in reality, it looks like the old EAR's classes are still active - based on the front-end result.
That is history. Today, based on your suggestion, I directly tried to "Update" existing application (with the new EAR). It constantly failed with different exceptions and the most common one being "PermGen space". Some other exceptions are listed below. Each of these were faced during different attempts to "Update" the application.
- weblogic.application.ModuleException: Exception starting module: EJBModule(norkom_wlm_ejb.jar) - PermGen space
- weblogic.application.ModuleException: [HTTP:101216]Servlet: "configuratorInitServlet" failed to preload on startup in Web application: "norkom_cms_us".
java.lang.NullPointerException
- weblogic.application.ModuleException: Exception preparing module: EJBModule(norkom_base_ejb.jar) - PermGen space
Once when I tried to "Delete" the application, I faced the below error.
- com.bea.netuix.nf.UIControlException: com.bea.netuix.nf.UIControlException: Could not retrieve PageFlow for uri [com/bea/console/actions/app/install/Flow.jpf] for portlet [AppApplicationInstallPortlet].
Since the "java.lang.OutOfMemoryError: PermGen space" error was the most common and since increasing the value of the MEM_ARGS field in setDomainEnv.sh helped with Weblogic 9.2, I decided to do the same in 10.3 Below is how it looks now. I have highlighted the lines which were changed by me. As I don't understand their terminologies, I adopted a trial-error method.
MEM_ARGS="-Xms2048m -Xmx3072m" *********** Raghu ***********
export MEM_ARGS *********** Raghu ***********
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
#WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"
WLS_MEM_ARGS_64BIT="-Xms2048m -Xmx3072m" *********** Raghu ***********
export WLS_MEM_ARGS_64BIT
#WLS_MEM_ARGS_32BIT="-Xms256m -Xmx512m"
WLS_MEM_ARGS_32BIT="-Xms2048m -Xmx3072m" *********** Raghu ***********
export WLS_MEM_ARGS_32BIT
else
WLS_MEM_ARGS_64BIT="-Xms512m -Xmx512m"
export WLS_MEM_ARGS_64BIT
WLS_MEM_ARGS_32BIT="-Xms512m -Xmx512m"
export WLS_MEM_ARGS_32BIT
fi
MEM_ARGS_64BIT="${WLS_MEM_ARGS_64BIT}"
export MEM_ARGS_64BIT
MEM_ARGS_32BIT="${WLS_MEM_ARGS_32BIT}"
export MEM_ARGS_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_ARGS="${MEM_ARGS_64BIT}"
export MEM_ARGS
else
MEM_ARGS="${MEM_ARGS_32BIT}"
export MEM_ARGS
fi
MEM_PERM_SIZE_64BIT="-XX:PermSize=128m"
export MEM_PERM_SIZE_64BIT
MEM_PERM_SIZE_32BIT="-XX:PermSize=48m"
export MEM_PERM_SIZE_32BIT
if [ "${JAVA_USE_64BIT}" = "true" ] ; then
MEM_PERM_SIZE="${MEM_PERM_SIZE_64BIT}"
export MEM_PERM_SIZE
else
MEM_PERM_SIZE="${MEM_PERM_SIZE_32BIT}"
export MEM_PERM_SIZE
fi
#MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=256m"
MEM_MAX_PERM_SIZE_64BIT="-XX:MaxPermSize=3072m" *********** Raghu ***********
export MEM_MAX_PERM_SIZE_64BIT
After doing this, "Updating" even the old EAR is consistently failing, mainly with the "PermGen space" error. Hence I am totally stuck and clueless how to proceed.
Please let me know your thoughts.
Regards,
Raghu

Error when I deployed the java EAR application in NWDS 7.1

HI All,
I got the error when I deployed the java EAR application in NWDS 7.1 version..help me out...........................................
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=[ERROR CODE DPL.DCAPI.1023] AuthorizationException.
Reason: , An error occurred during the deployer retrieval. Cause =[ERROR CODE DPL.DC.3151] The user LJ4PJW could not be authorized, because doesn't own the (com.sap.engine.interfaces.security.ServiceAccessPermission dc) permission for deploy controller. at com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
Thanks
Costa

The user LJ4PJW could not be authorized, *because doesn't own the* (com.sap.engine.interfaces.security.ServiceAccessPermission dc) *permission for deploy controller. a*t com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
The user is not have proper authorizations. Use some other administrators user id which has all admin roles and authorizations assigned and try to deploy.
Regards,
Ravi

I have address book v. 6.1 in Lion. I have recently been unable to change my notes. When I type anything new, it simply disappears. How can I fix this?

Hi
I have address book v. 6.1 in Lion. I have recently been unable to change my notes. When I type anything new, it simply disappears. How can I fix this?
I checked previous discussions on Address Book problems and there was a suggestion to find Library in GO. I do not see Library when I clicl Go. Can someone advise on this?

To migrate your data to a new iCloud account go to Settings>iCloud and turn off all synced data (contacts, calendars, etc.), when prompted choose to keep the data on your phone. After everything is set to off, scroll to the bottom and tap Delete Account. Next, create the new iCloud account on your phone and turn on syncing for contacts, calendars, etc again. If prompted, choose Merge. This will upload your data to the new iCloud account.

Hey software does not respond when I open a new file or an existing file

Hey software does not respond when I open a new file or an existing file

Nobody can tell you anything without system info and other technical details.
Mylenium

Managed servers cache not updated when we deploy a new EAR....

Similar Messages

Maybe you are looking for