Managed system asking logon popup while clicking change & Workload  E2E

Hi ,
Managed system asking logon popup while clicking change & Workload  E2E in solman_workcenter ->RCA>E2E
it asking logon pop-up if i click change analysis & workload analysis for all managed system.
My Bi client for solman system is 400.but they asking my BI production system logon credential.
I check in Solman_setup , i gave my bi client only and also i re-run my solman_setup basic configuration wizard.
But still i am getting the pop-up.
How to change this setting .Any help?
Regards,
Karthik

Hi ,
I found In Solman_workcenter-> RCA -> diagnosticsetup -> Diagnostic system -> Advanced setup ->last setup result showing
"Successfully stored property setup/SMD_URL=http://<solman hostname >:50100/ into SMD repository
Successfully stored property setup/BI_URL=http://<Bi hostname >:8080/ into SMD repository
Stored BI URL in BI configuration : http://<BI hostname>:8080/
Stored Diagnostics URL in BI configuration : http://<:soman hostname>50100/"
Here BI URL is map to my BI production system. How to change solman 400
in this place.
how to change this setting?
Plz give path to find SMD repository.
Regards,
Karthik
Edited by: HemaKarthik on Aug 30, 2010 7:50 PM

Similar Messages

  • Who's who asking logon details while opening change own photo

    Hello Guru,
    My issue is "Who's who" service SAP calling PZ01 first and when we go for "change own data",  I am trying to upload/change existing photo.
    Issue is ,  EP asking me to logon again. But I have set user mapping in personalization.
    Any ideas to solve this issue.
    Best Regards,
    Krishna

    Hello,
    Please review our Wiki. The following links provide you the solution:
    Employee Photo Upload - https://wiki.sdn.sap.com/wiki/display/ERPHCM/EmployeePhotoUpload
    Add Employee Photo on Infotype 0002 - https://wiki.sdn.sap.com/wiki/display/ERPHCM/AddEmployeePhotoonInfotype+0002
    Regards,
    Bentow.

  • Error While creating users in managed system.

    Dear All,
    I am configuring SAP Solution Manager 7.1. I am in stage of Managed System Configuration (for JAVA).
    In step 6 Create user:  While creating (System) user SM_COLL_<SID> I am getting error :
    An error occurred while processing the UME command READ_USER from agent <hostname> : Server returned: 401 Unauthorized. Please check SMD agent application logs.
    And for ABAP System,
    SMDAGENT_XXX Technical User (in Managed System <SID> Client 000)
    while creating user SMDAGENT_<SID> and SAPSUPPORT
    I am getting error:
    No CENTRAL nor DIALOG instance known for system <SID>
    But in SM51 I can see Server Status Active. 
    and Users are not present.(Checked it through SU01)
    I am not getting why this is happening.
    Please help me regarding the same.
    Thanks & Regards
    Ajitabh

    Hi,
    I am pasting the SMD agent application logs:
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[SMDAgentAppLog]/>
    <!PATTERN[SMDAgentApplication.log]/>
    <!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%t] %10s %m)]/>
    <!ENCODING[Cp1252]/>
    <!FILESET[0, 10, 1000000]/>
    <!PREVIOUSFILE[SMDAgentApplication.9.log]/>
    <!NEXTFILE[SMDAgentApplication.1.log]/>
    <!LOGHEADER[END]/>
    Nov 29, 2011 2:02:09 PM [Thread[Connector,5,main]] Warning    com.sap.smd.wily.hostagent.mai.MaiAdapter - init: Introscope Host Adapter is not active, no Introscope metrics from MAI
    Nov 29, 2011 2:21:01 PM [Thread[Thread-33,5,main]] Warning    com.sap.smd.wily.hostagent.mai.MaiAdapter - init: Introscope Host Adapter is not active, no Introscope metrics from MAI
    Nov 29, 2011 2:38:31 PM [Thread[Thread-67,5,main]] Warning    com.sap.smd.wily.hostagent.mai.MaiAdapter - init: Introscope Host Adapter is not active, no Introscope metrics from MAI
    Nov 30, 2011 1:26:19 PM [Thread[ExRun:OutsideDiscovery_1,5,OutsideDiscovery:ExecTG]] Path       Caught java.net.ConnectException: Connection refused: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
         at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
         at java.net.Socket.connect(Socket.java:521)
         at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.openSocket(ConnectionExtendedImpl.java:2025)
         at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.open(ConnectionExtendedImpl.java:1398)
         at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.sendInternal(ConnectionExtendedImpl.java:1552)
         at com.sap.smd.agent.plugin.connectors.http.ConnectionExtendedImpl.send(ConnectionExtendedImpl.java:1483)
         at com.tssap.dtr.client.lib.protocol.requests.RequestBase.perform(RequestBase.java:570)
         at com.tssap.dtr.client.lib.protocol.requests.RequestBase.perform(RequestBase.java:693)
         at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:548)
         at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:673)
         at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:638)
         at com.sap.smd.agent.plugin.connectors.http.HTTPConnectorService.performRequest(HTTPConnectorService.java:624)
         at com.sap.smd.agent.plugin.connectors.webservice.SAPHostAgentTrustedConnectionConfigurator.setupTrustedConnection(SAPHostAgentTrustedConnectionConfigurator.java:81)
         at com.sap.smd.agent.plugin.connectors.webservice.WSConnectorFactory.configureLocalSAPHostAgentEndPoint(WSConnectorFactory.java:244)
         at com.sap.smd.agent.plugin.hostagent.check.HostAgentCheckService.getHostAgentVersion(HostAgentCheckService.java:105)
         at com.sap.smd.agent.plugins.dcc.util.WSProxyManager.checkSAPHostAgentVersion(WSProxyManager.java:287)
         at com.sap.smd.agent.plugins.dcc.util.WSProxyManager.initSAPHostControlWebServiceClient(WSProxyManager.java:112)
         at com.sap.smd.agent.plugins.dcc.util.WSProxyManager.getSAPHostControlProxy(WSProxyManager.java:75)
         at com.sap.smd.agent.plugins.dcc.job.PhysicalHostPushJob.run(PhysicalHostPushJob.java:195)
         at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:46)
         at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781)
         at java.lang.Thread.run(Thread.java:679)
    Nov 30, 2011 1:26:19 PM [Thread[ExRun:OutsideDiscovery_1,5,OutsideDiscovery:ExecTG]] Error      Pb:
    [EXCEPTION]
    java.rmi.RemoteException: Error to perform http request cause by java.io.IOException: Unable to open connection to host "FQDN:1128". The host is down or unavailable...; nested exception is:
         java.io.IOException: Unable to open connection to host "FQDN:1128". The host is down or unavailable.
    Dec 2, 2011 4:56:53 PM [Thread[Thread-368,5,main]] Warning    [Setup]Step Id 1051 has no step description
    Dec 2, 2011 4:56:53 PM [Thread[Thread-368,5,main]] Warning    [Setup]Step Id 1051 has no step description
    Dec 2, 2011 5:02:05 PM [Thread[Thread-363,5,main]] Error      [Setup]Failed to get a soap response from http://FQDN:50000/spml/spmlservice
    Dec 2, 2011 5:02:05 PM [Thread[Thread-363,5,main]] Error      [Setup]An error occured while processing the UME command READ_USER from agent HOSTNAME : Server returned: 401  Unauthorized
    [EXCEPTION]
    com.sap.sup.admin.xmlsoap.core.soap.NativeSOAPException: Server returned: 401  Unauthorized
    Kindly help me out guys.
    Thanks & Regards
    Ajitabh

  • Solman_admin password changes results in errors during managed system setup

    Hello all,
    I am trying to get Solman 4.0 EHP 1 to work, but get numberous problems.
    Currently I have 6 messages at SAP, but no solution yet.
    Situation:
    Solman 4.0
    SAP_BASIS     701     0003
    SAP_ABA     701     0003
    ST-PI     2008_1_700     0000
    PI_BASIS     701     0003
    SAP_BW     701     0003
    CRMUIF     500     0001
    SAP_AP     700     0014
    BBPCRM     500     0013
    CPRXRPM     400     0014
    BI_CONT     704     0002
    ST     400     0019
    ST-A/PI     01L_CRM570     0000
    ST-ICO     150_700     0016
    ST-SER     701_2008_2     0002
    So, it is uptodate.
    The problem:
    Changing the solman_admin password results in errors during connecting a managed system.
    In the inital setup the solman_admin is created with a pasword.
    After the basic setup I setup some managed systems.
    In the meantime I had to change the password of solman_admin
    I am logged in with solman_admin and do solman_setup to setup the managed system.
    During the setup a process tries to logon back to the solman using solman_admin and the incorrect password.
    This is the logging:
    Step SSO Details
    Found SID for SSO ACL entry : MSD
    Found login.ticket_client for SSO ACL entry : 000
    The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
    The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (823 bytes)
    A failure occured while connecting to ABAP stack on localhost sys=70 client=300 user=SOLMAN_ADMIN
    !! Exception : Password logon no longer possible - too many failed attempts
    A failure occured while importing ABAP SSO ticket certificate in ABAP stack
    !! Exception : java.lang.NullPointerException
    Java SSO ticket certificate of MSD was imported in ABAP PSE of kswv024.mob.local (client 300)
    The Java SSO ticket certificate was successfully imported in ABAP System PSE, and the ACL updated accordingly (SID=MSD LoginTicketClient=000)
    Anyone else has this problem?
    gr
    Sander

    Just for clarification it's Solman 7.0 EHP1 correct?
    Also you may want to unlock the following user:
    localhost sys=70 client=300 user=SOLMAN_ADMIN
    Then if you navigate (in solution manager) to TCode solman_workcenter -> "Root Cause Analysis" tab ->"Agent Administration" menu item on the left -> "Applications Configuration" tab -> under the Agent Applications - Configuration menu on the left select "com.sap.smd.agent.application.global.configuration" -> Change the "Scope" drop down in the frame to the right to the SMD agent that you are using for "localhost sys=70 client=300" -> Click the "edit" button to the right of the Scope drop down box -> now find the entry below that lists "SOLMAN_ADMIN" as the user and find the corresponding password entry and update it with the new password that you changed it to -> click save and try the managed setup again.
    Hope this helps, please let me know and we can go from there.

  • System ask for a transport request while maintain IT0002

    I'm getting strange message while maintaining IT0002 i.e system ask for a transport request. But while maintaining IT0008 or IT0009 etc it's not asking transport request. So while Diagnosis it is giving
    Active integration to Organizational Management means that when a link to Organizational Management is created, it is saved automatically.
    When saving organizational data, the data must be written to a transport request because, for example, the automatic transport recording is active. Without a correction request, the relevant changes in Organizational Management cannot be saved.

    Check the Tcode OOCR how the swich is active or not
    later check with ur basis Guy once

  • No popup to select active implementation cycle, while creating change Request

    Hi,
    I have two active Implementation projects.
    While creating change requests, it is not giving any popup to select the specific cycle.
    It automatically assigns to newly activated Cycle.
    Please advise.
    Thanks & Best Regards,
    Kiran Sathyan

    Hi,
    if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
    Now I dont think so Popup functions applicable for implentation cycles.
    check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
    and regarding closing the project cycle check this out below informations,
    933705 - Closing inconsistent project cycles
    Change Request Management scenario: Usual questions and known errors
    question 10.
    Make sure you closed open tasks, chk in tcode scma
    Thanks
    Jansi

  • Change Management System configuration

    Dear Experts.
    I have some problem with Change Management System configuration, probably it hasn't installed properly,
    but I cannot tell certain description of the problem to the BASIS administrator.
    The problem is the following:
    At first, then I logon into CMS by the first time, in the tab Domain Data obligatory input fields CMS User and CMS Password are the empty. Whitch username anew password values I should input in those input fields?
    The other problem is then I'm trying to create the new Track: in the tab Track Data input Id and Name of the Track,
    and pushing the Save Button, in the left table it doesn't appear. And then I trying to add Software Components to the Track, pushing the button Add SC, but the component list is empty.
    Edited by: Sergey Tuzov on Apr 25, 2008 11:28 AM

    We has found the problem issue by our self.
    The user account for CMS has no role with permission to SLD component access.
    Therefore, there was no access to SLD resources: software component and others.
    Thanks' for you attention to my topic.

  • Getting error while clicking on System Monitoring

    Dear All,
    I have confirgured EWA in Solution Manager 4.0 for ECC6.0 Servers. EWA is getting generated without any issue. I have to monitor the Satellite Systems from Solution manager, so when i tried to click System Monitoring/Administration, it is giving error as  "http://solman.srhouse.com:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm call was terminated because the corresponding service is not available.".
    ErrorCode:ICF-NF-http-c:009-u:SOLARSERVICE-l:E-i:solman_ESM_01-v:0-s:404-r:NoExtensionFound
    If any one has come across this issue, please help to resolve this issue.
    Thanks & Regards,
    Ranjith Kumar D

    Hello Ranjith,
    Your Portal service is may not running.
    Logon with <sid>adm and start jcmon and check if all server processes are up and running.
    If jcmon is properly running, then try using the following link and check what happens.
    http://solman.srhouse.com:8001/sap/bc/gui/sap/its/webgui/!
    The above url pattern is from integrated ITS server, for this to work you should maintain FQDN - fully qualified domain name.
    The url should be
    http://<host>.<domain>.com:<port>/sap/bc/gui......
    how to do this?
    check this WIKI
    https://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName%28FQDN%29
    also, uncheck the "show friendly error messages" check box from the browsers tools->internet options->advanced tab to get more details error messages thrown by the server instead of just "the page cannot be displayed"
    And also make sure that you have activated the services, virtual_host, sap , bc, gui, sap, its , in transaction SICF and also did you publish SYSTEM and WEBGUI services to site INTERNAL.
    for more info check this weblog.
    Running your first  ITS WebGUI application in SAP NetWeaver 04 ABAP Edition - NSP
    Hope the above info is helpful.
    Regards,
    Satish.

  • How to change text of logon-popup-window from WAS ?

    hi there,
    i have a link in an email, which links to a application in WAS.
    the user gets an POPUP where he has to enter Username and Passwort.
    Above UserID there is a text "SAP Web Application Server [P02]"   (P02 is my system)
    does anybody know how to CHANGE this text ???
    reg, Martin

    Hi Martin Svik,
        Could you please check the below links :
        http://help.sap.com/saphelp_nw70/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
       and
             http://help.sap.com/saphelp_erp2005vp/helpdata/EN/34/608a44002f41c2a7bcd923758dc03a/content.htm
    Regards,
    S.Manu.

  • All Information regarding Change and Transport management System in SAP

    Hello Experts,
    Iam into Basis . I need all information ,fundamentals and concepts over Change and Transport management system in SAP .Its fundamentals,the way it works ,how requests r transporteded etc.  I want more of this information in regards to practical scenario. Plz dont provide help link as iam aware of that. I need good explanatory content ,in your own words shall be appreciated more. If any body has any self prepared good explanatory and procedural matter , tat will be of help.requested to revert at earliest as this is a bit urgent. My Email Id is [email protected]
    Useful answers shall be rewarded points.
    Thanks and Regards,
    Somya

    check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/d7/8eb9361a75ea43e10000009b38f839/frameset.htm

  • SMSY Data Source changes after performing Managed System Config

    Hello everyone,
    I am working with Solman EHP1 SPS26.  I have setup up my central SLD to push system data to my Solman local SLD which is then retrieved from Landscape Fetch to SMSY.  Initially, everything seemed to be working and all data sources reported SLD.
    However, once I performed the Managed System Confirguration wizard for a particular technical system, that systems data source would change to TMS/RFC under SMSY.  It's actually not even that consistent.  For example, the server says source is RFC, the product system says TMS/RFC and some of the product instances still say SLD.
    Is this normal for this to happen after connecting a managed system?  Will these systems still be updated via the SLD considering SMSY_SETUP is configured to use the SLD?
    Anyone's help would be greatly appreciated.
    Alex

    Hello,
    If you notice in SMSY this is not an editable field.
    It is reporting the last datasource used.
    Thefore when you made a change via managed system setup that became the last data source used.
    So yes it is normal to see this change.
    If you have configured the datasource to be the SLD, it should continue to update these systems.
    Where you need to watch out is making manual changes in SMSY, as the SLD can view this as a different system to the SID it knows and will generate systems with known SIDs appended with a suffix variable to distinguish it, as the SLD will not overwrite manual changes, and will create new systems instead.
    But the field in SMSY reflects the last data source used.
    Hope this helps some.
    Regards,
    Paul

  • Change Request Management without Transport Managment System

    Hello,
    we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
    What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
    Many thanks in advance.
    Jenny

    Hi Jenny,
    you can do this with the following activities in your custom Business Transaction (BT):
    - remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
    - remove the action from the actions depending on user status (TA: starting from SPRO)
    - unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
    The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
    Please let me know if you need more details, otherwise please reward the forum points
    Regards ,
    Giampaolo

  • Configuring change pointer in SAP DEPOSIT MANAGEMENT system

    Hi,
    I am working on SAP Deposit Management system, which is very much similar to a normal R/3 system.
    I need to create a change pointer everytime a business partner is created or changed. Can you please guide me through the steps especially
    1. what would be the message type i need to configure and activate in BD50
    2. What is the object name and Table name that i should select in BD52
    And also if there is anything else I need to be doing?
    Cheers,
    Babs. <b></b><b></b><u></u>

    Hi Babs
    Here are my suggesstions.
    1. There are different message types available for business partner, seems it depends on what data you want make synchronous. Try with BUS1006, search for BUPA* for message types.
    2. Here you can try for the above message type with object type BUPA_BUP and table as BUT000
    Cheers
    Manohar

  • Now able to go Managed system in BPM when i  Double Click on counter field

    Hi all
    Step:
    call DSWP
    u2022 choose your solution
    u2022 choose Operations Setup -> Business Process Monitoring
    u2022 choose u2018Setup Business Process Monitoringu2019
    Local RFC Destination for Data Collection -statu is green
    u2022u2018Load Monitors SIDu2019- Working fine
    u2022 Press the button
    u2022 go to the subcheck and press F4 help on Monitor Name
    u2022 choose u2018DV Cockpit: Table Analysisu2019
    But in detail information tab-when i  Double Click on the counter field it will give me pop when i click Archiving object for F4 it is not take to Managed system.
    Please let me know how it will go?
    Regards,
    Swaroop

    I am having the exact same problem, have vista/hp media center also, sometimes if I double click it will open after all, the arrow keys do navigate however, any suggestions?

  • SAP Logon - how to disable popups while playing tests (QC and  TAO)

    Hello,
    I am using QC 10, QTP 10 SAP TAO 2.03.
    I recorded and cofigured sample scripts and now I am planning to run it from QC during night. There is one problem to run scripts someone needs to accept popups initiated by sap logon at the beginning of test run -
    So my question is how to disable the logon popup windows and fully automate runs?
    Thank you in advance for your help
    Edited by: Ksan_1 on Apr 1, 2011 9:04 PM

    It is just the beginning of replaying the test.
    When i initiate the test eg from the QC the very first operation is to confirm 2 popups. First informs about starting the gui and. Second is confirmation that script would be initiated. In the system.
    So i need human interaction to initiate each SAP and this is part i want to eliminate.
    Is there any way to disable the initial popup?

Maybe you are looking for