MAnaged system configuration error in solution manager

Hi,
While doing managed system configuration getting the error, below versions are using.
MDM 7.1 SP10 Import server and Solution manager 7.1 SP10.
Can anyone help me?.
Regards
Chandra

Two cases you have
1) Satellite system
Re-install The DIA agent and give correct (port numbers )SLD details
Once you re-install the DIA agent, run Rz70 from satellite system
data will pull from satellite system to central SLD.
2)Run SLD check from Solman system , check its successful or not
Go to LMDB and check satellite system
After re-Synchronize technical system from SLD
Thanks ,
Rahul yedapally

Similar Messages

Managed System Configuration Error for MDM 7.1 SP09

Greetings, Needed your expert advise. We are getting an error while configuring our MDM Servers (Version 7.1.08.196) in Solution Manager. As suggested in SAP Note 1798643 , I have manually filled the required details and transferred through sldreg.exe to SLD. Now when i try to perform Managed System Configuration, it is throwing the below error. The definition of Technical System '~MDM' is not correct: '~MDM': No Path found in Installed Technical System 'SID~MDM~'. I'm not sure how to manually update the Install Path for our MDM Servers. Since, the data to LMDB is automatically supplied, I might not be able to manually edit anything. Could you please advise if there is any step to solve this issue. Thanks, Haseeb Ahmed.

Dear ,
Haseeb,
I had the exact same problem with MDM managed system setup . I was on MDM 7.1 SP10.
1940337 - RCA template for Solution Manager 7.10 SP10
This note should resolve your problem. This note has the updated template for MDM.
It did for mine
Thanks
Amit

Managed system configuration error

Dear Expert,
While doing managed system configuration step-"Check Configuration" for my solman (7.1)system itself, I am getting attached error.
Please Advice .
Thanks
Chander

Dear Oliver ,
I have downloaded the Patch 183 (SAPHOSTAGENT183_183-20005735.SAR).
Refering below link for upgrade http://help.sap.com/saphelp_nw73ehp1/helpdata/en/39/a1f623bae74a2784f88282c8652070/content.htm
But after uncaring of Patch 183 ,I am not getting below files in new patch level .
sapstartsrv.exe
saposcol.exe
saphostctrl.exe
saphostexec.exe
According to link the last file will be used in upgrade
saphostexec.exe -upgrade
but this is not present in new patch level 183.
Thanks
Chander

System Monitoring error in Solution Manager 4.0

Hi All,
I am configuring "System Monitoring" in Solution Manager 4.0.
I have successfully added satellite system through SMSY
as well as i have added system to the Logical Component, but when i open tcode solution_manager i am getting error Action Cancelled Internet Explorer was unable to link to the Web page you requested
ICM is running and I have also activated several services from SICF.
Please guide me in this scenario.
Points will be awarded
Thanks
Sachin

Hi,
Follow the below steps
1) Maintain the host file
Details of Solution manager in the following format
ipaddress host name fully qualified name
2) Internet explorer
Tools--> Internet options --> Connections --> Advanced settings
Maintain the bypass proxy there.
Since you are using GUI 710 your IE should be compatable. use IE 7.
If this answers your query, change the status of thread as Answered
regards
Naveen

Syntax error in program CL_AC_METRIC_REPOSITORY=======CP When going to managed system configuration in solman 7.1

Dear SAP Gurus,
Good Morning.
I'm getting error in managed system configuration in solman 7.1. Error is like
The system preparation and Basic configuration in working fine, but when we are going to click the managed system configuration Error getting like this.
Solution Manager Version : 7.1
SP Level : SP5
Thanks in Advance.
Regrads,
Kumar BN

Hello Kumar,
I would suggest moving this discussion to this space in SCN: http://scn.sap.com/community/it-management/alm/solution-manager
That will help get you a quicker response.
Thank you,
Kristen

Managed System Setup / Configure Diagnostics for Solution Manager itself

Hello,
I'm trying to run the "Managed System Setup" for the Solution Manager itself and
I got a problem in the step 4 (Diagnostics Configuration / Configure Diagnostics):
In the new opened window is only the ABAP stack displayed and the Java stack
is missing.
Does somebody know how to make the java stack visible?
From my point of view seems the configuration of the SMSY ok. The java stack is also
as "relevant" set.
The Solution Manger 7.0 EHP1 is on SP25.
Thanks in advance for your help!
Kind regards,
Joern

Hi Jorn,
I dont think its happening just because of your CR Content.
Still If you want to update it,then go to Administration Tab in SLD->>Import the latest CR Content from there.
As the latest CR Content is :SAP CR Content Version (sld/active): SAP_CR 7.6 (produced 11/17/2011)
And Jorn if you are stucked in the Diagnostic Agent registration then Go to Agent Candidate Administration->>In connection
Parameters Tab go to->>Custom SLD Connection Parameters->>Apply->>Mark the Diagnostic Agent you want to
connect->>Attach->>Give the password of the SMD_ADMIN->>Apply->>This way you will connect to the available Diagnostic
Agent.Hope this will help your problem.
Thanks & Regards
Ajitabh
Edited by: jitu001 on Dec 23, 2011 5:47 PM

Display SXMB_MONI XML errors in Solution Manager (CEN)

Hello All,
Requirement is to display the XML error messages in SXMB_MONI in our Solution Manager (CEN)? Could you please let me know the major steps that would be involved on the same?
Please share your thoughts!
Thank You,
Antarpreet

My apologies not reading it properly....
Solution manager also usess the same concepts of the CCMS as we do it in XI, so you can setup the XI envinorment details in solution manager and try to capture the alerts....
Here are the Steps:
Prereq:
All Satellite systems connected from Solution Manager on the "Transaction SMSY" screen.
Prepare RFC connections between Solution Manager and Satellite systems for data collection ( RZ20 Data collection RFCs)
Steps:
1. Register "SAPCCMSR" and "SAPCCM4.X" on Sattilite Systems to report ABAP and Java stacks in local systems and report to Solution manager System
2. On Solution Manager System ( Acting as Central System) configure CCMS monitoring sets fromRZ20.
3. RZ21 --> configure CCMS pings alert monitoring.
all info with step by step guide avalible from Solution Manager configuration guides and http://service.sap.com/rkt
( This ref from solution manager forum)
check this link also:
http://www.scribd.com/doc/7858198/Solution-Manager-SAP-NW2004S-Monitoring-Setup-Guide-SP12

Configuration Check Error in Managed System Configuration

Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany Pan

Hi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi

Error in Managed system configuration.

Hi Folks,
In Solman 7.1 i am configuring my Java system in managed system configuration on the last phase of configuration which is "Check Configuration" i got the below error...
Can any one guide me on this....
I installed the Diagnostic agent as well as willy inter scope.
Regards,
Anil.

check the note which describes your problem
1776959 - Solution Manager 7.1 Manged System configuration. Error: Timezone from managed system could not be retrieved: Timezone of J2EE Engine (GMT+01:00) does not match the timezone of the diagnostics agent (Europe/Berlin)
Resolution
Open the instance.properties file of the J2EE Engine on the managed system
Locate the parameter "-Duser.timezone=" and its value
If the -Duser.timezone is not set the JVM uses GMT
Set the -Duser.timezone parameter in the JVM of the SMD Agent. If there was no "-Duser.timezone in the J2EE's instance.properties file use the timezone that was indicated in the error message e.g. GMT+01:00 (from the above error message, this might differ on your environment) To do this:
Locate the smd.properties file (for newer agents the files is called: smdagent.properties)
The path is: .../usr/sap/<DiagnosticAgentSID>/SMDA<SYSNumber>/SMDAgent/smdagent.properties
The -Duser.timezone= parameter of the Diagnostics Agent and the SAP J2EE engine need to be set to the same timezone. That means the string needs to be the same for both parameters
e.g.
If the -Duser.timezone= parameter of the J2EE engine is set to -Duser.timezone="GMT+01:00"
set the Diagnostics Agent parameter to:
smdagent.javaParameters=-DP4ClassLoad=P4Connection -Xmx256m -Xms256m -Duser.timezone="GMT+01:00"
Restart the Agent
Re-run the "Configuration Check" in the "Managed System Configuration"
Please make sure that the time zone configuration is correct according to the SAP recommendations: http://wiki.sdn.sap.com/wiki/display/Basis/Timezone+changes+best+practices

SQL Error 0 during DBACockpit setup in Managed System Configuration

Hi All,
I'm getting SQL Error 0 during DBA Cockpit setup in Managed system configuration. I'm trying to connect MsSQL 2005 from Linux system(Solution Manager 7.1 SP10). I have installed necessary ODBC and microsoft drivers. Any suggestions will be appreciated.
Regards,
Pragadees

If I've understood you correctly, you are trying to setup a remote database connection from an SAP Solution Manager system running on Linux with a database which is NOT MSSQL to a database which is MSSQL running on Windows.
In that case have you checked these SAP notes ?
1265134 - DBA Cockpit: Connecting a remote database
1388700 - SolMan 7.0 EHP1 Database Warehouse for MSSQL
Regards
RB

Managed System Configuration: SSO setup failed for Solution Manager 7.1 sp11

Hi Folks,
While doing Managed System Configuration for Soman system i am getting error in SSO Setup
Currently I am in
8. Configure Automatically :Single Sign On Setup
This is i am going for managed System (Solution Manager System Itself)
Below is error log..
SSO setup failed : a problem occured while attempting to add login modules for ticket authentication
Screen shot attached.
Found SID for SSO ACL entry : SMP
Found login.ticket_client for SSO ACL entry : 000
The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tc~webadministrator~solmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
The SSO ticket Certificate <OU=J2EE,CN=SMP> has been successfully imported into ticket Keystore
SSO setup failed : a problem occured while attempting to add login modules for ticket authentication
SSO setup failed : error while updating login modules : Caller not authorized.; nested exception is:
java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The SSO ticket Certificate <CN=SMP> has been successfully imported into ticket Keystore
SSO setup failed : a problem occured while attempting to add login modules for ticket authentication
SSO setup failed : error while updating login modules : Caller not authorized.; nested exception is:
java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Exception
java.rmi.RemoteException: Caller not authorized.; nested exception is:
java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:160)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:634)
at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:520)
at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
at com.sap.engine.services.security.restriction.Restrictions.checkPermission(Restrictions.java:170)
at com.sap.engine.services.security.restriction.Restrictions.checkPermissionRemote(Restrictions.java:158)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImpl.getPolicyConfiguration(RemoteSecurityImpl.java:63)
at com.sap.engine.services.security.remoteimpl.RemoteSecurityImplp4_Skel.dispatch(RemoteSecurityImplp4_Skel.java:225)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:137)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
at com.sap.engine.services.security.exceptions.BaseSecurityException.writeReplace(BaseSecurityException.java:349)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:910)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1024)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1344)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1316)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1260)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1065)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:282)
at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:147)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:338)
... 8 more
Regards,
San

Hi Sandeep,
It seems authorization issue. Please check the below SAP Note :
1988642 - Warning 'caller not authorized' in Step 'Single Sign On Setup'
Hope this helps.
Thanks & Regards,
Nisha

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

SOLMAN_SETUP Wizard - Error on Managed System Configuration

Hi all,
I've installed SAP Solution Manager 7.0 EHP1 (Stack 19) on linux-oracle.
After I start the configuration with SOLMAN_SETUP tcode.
The "Initial Configuration" and the "Basic Configuration" phases are termined with success.
In the third phase "Managed System Configuration", I try to connect itself on client 001 but when I try to generate the RFC Connection I received an error message on wizard when the system create the "Back RFC Destination". If I check this RFC on SM59 tcode it works!!!! I don't understand why I received the error message during the wizard.
Then on "Check Prerequisites" I execute the "Diagnostic Prerequisites" phase and I received 2 error messages:
a) The Introscope Enterprise Manager configuration cannot be loaded. Details:
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration. at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251) at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415) at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461) at com.sap.sup.admin.wily.jdbc.EMOverview.getAllEMgrs(EMOverview.java:220) at com.sap.sup.admin.selfcheck.checks.wily.em.EmJdbcCheck.process(EmJdbcCheck.java:32) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:165) at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781) at java.lang.Thread.run(Thread.java:770)
b) The RFC Read Destination is not available for connection to Satellite System (RC=2). Details:
Please check SAP Note 1106900
I find The RFC Read Destination on SM59 tcode and it works if I try to "Connection Test".
Could you please help me to check the two errors??
Thanks in advanced
Moreno

Some more info when I tried to run the setup wizard again.
Step Wilyhost Agent Details
Setup Exception: Empty or no Wily EM host retrieved from secured global config! Going on with "localhost".
Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead.
Created destination XXX|hostname_xxx_01
Created action xxx -XXX AbapSystem
Created action xxx|hostname_xxx_01 - XXX|hostname_xxx_01 AbapInstance
Created 2 action(s).
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
Exceptions
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:269)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:440)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:87)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:110)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:416)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:328)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:545)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1680)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1950)
at java.lang.Thread.run(Thread.java:571)
hostname is the hostname of the system, i removed it.
xxx is the solution manager sid.

SolMan 7.1 SP10: Managed Systems Configuration: client 000 OK, client 100 error

Hello,
after installing SolMan 7.1 SP10 successfully I also completed the steps "System Preparation" and "Basic Configuration".
Now I'm connecting the managed ABAP systems to the Solution Manager by performing step "Managed Systems Configuration".
After several other ABAP systems I'm now connecting our productive CRM 7.0 EHP1 system "CM3" (SAP_BASIS 702).
I also connected the CRM development and CRM quality assurance system without a problem.
For client 000 everything worked fine, the RFC destinations were created and a green light is shown.
Now the problem is to connect the productive client 100:
The log for Activity RFC Connection says:
The corresponding dev_rfc tracefile says:
**** Trace file opened at 20140326 164911 W. Europe Standard Time, by disp+work
**** Versions SAP-REL 720,0,523 RFC-VER U 3 1468763 MT-SL
======> Name oder Kennwort ist nicht korrekt (Wiederholen Sie die Anmeldung)
ABAP Programm: SAPLSM_SETUP_API (Transaction: )
Called function module: FUNCTION_EXISTS
User: SOLMAN_ADMIN (Client: 001)
Destination: 0050568713C71ED3AD9FC4F78AC9D9EB (Handle: 16, DtConId: 27FEB4E356BCF14F99EB0050568713C7, DtConCnt: 1, ConvId: 64734943,{27FEB4E3-56BC-F14F-99EB-0050568713C7})
EPP RootContextId: 0050568713C71ED3AD9FB7AD4C4859EB, ConnectionId: 0050568713C71ED3AD9FB784232C59EB, ConnectionCnt: 1
EPP TransactionId: BDFDB4E3626AF14899EB0050568713C7
But both users taken to execute this step (SAP Solution Manager Administrator "SOLMAN_ADMIN" and Managed System Configuration User "SM_ADMIN_SM3") exist and have the correct provided password.
Does anyone have a clue?
Kind regards
Rüdiger Höckel

Hello Ranjith,
thanks for your quick response.
The ST-A/PI software component is the same on all systems: 01Q_700 #2.
SolMan system: SM3
CRM systems: CM0 (ok), CM1 (ok), CM3 (problem with client 100, client 000 OK).
I also tried the recommendation found in the SAP Community Network
(http://scn.sap.com/thread/3483642) but this didn't help either:
1.Delete system from LMDB.
2.Delete system from SLD of solman.
3.Re- register the system to SLD of solman(rz70 for AS ABAP)
[the LMDB synchronizes with the SLD every 10 minutes, system CM3 is visible again in the LMDB]
4.Now follow the steps in managed system configuration.
The wizard worked fine for client 000 but throws this error for client 100.
I use all the latest installation and configuration guides.
For this step I'm using the guide "Managed System Configuration" that is available in the SOLMAN_SETUP wiki.
https://websmp206.sap-ag.de/~sapidb/011000358700001120342013E.pdf
Kind regards
Rüdiger
P.S. In total I have already connected eight systems (SAP_BASIS 700 to 731) but this is the first system that gives an error.

Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

All,
I installed my diagnostics agent twice with different options:
- Direct P4 connection via Java EE Dispatcher Node with port 5xx04
- P4 connection via SCS message server with port 81xx
In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
Please advice.
Thanks a lot.

Hi Allam,
I checked the KBA and I think now, I have the correct HTTP port.
The error I now get is S:CL_DIAGSTP_MESSAGE:483
When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
Any idea?
Thanks.

MAnaged system configuration error in solution manager

Similar Messages

Maybe you are looking for