Management access and history for the Web Survey

Hi to all,
I've two questions on the Web Survey.
1- Is possible the access on the Web Survey compiled from someone? If yes, what?
2- The History is managed?
Regards,
Marco

Hi Marco,
1. there is no system supported history management. You need to find a process.
I implemented using direct update in the application. The link is part of the portal
knowledge management. To have a survey history the purchaser or supplier copys
the file and store it in the folder.
2. All these screens are BSP driven. The registration page creates the business
partner in SRM, why changes are extremly tricky, but I also do not see the need
to change the first page. In Prescreen vendors it is the same, propably possible.
The questionaires can be adjusted within SRM trx and somehow easily configured.
3. There are several tables, which in combination contain the questionnaire.
Have a look for tables starting with tuws, like TUWS_SURVEY.
4. HTML
5. No; a questionnaire does no have any attachment functio. You can attach
document to a prospect in the trx Prescreen Suppliers. The docs are linked to
the Business Partner, like the questionnaire as well.
6. Once the supplier submits the registration page, the questionaire is sent out
automatically. For getting the process running the web survey settings as well
sapconnect needs to be configured. The process is described e.g. in Guide for
Strategic Sourcing as well into sap.help for the process.
Cheers,
Claudia

Similar Messages

  • HDV Aspect Ratio and Exporting For the Web

    INTRODUCTION
    I am trying to export an HDV video for the first time and have managed to confuse myself. I want to upload it to blip.tv and they transcoded videos into Flash with 4:3 aspect ratio. But more than that, I want to understand how this all works so I don't have to guess about the settings that will give me what I want.
    BACKGROUND DATA
    4/3 is 1.333...
    16/9 is 1.777...
    1440/1080 is 1.333... (if the pixels are square)
    1920/1080 is 1.777... (if the pixels are square)
    In FCP my clip format says:
    Frame Size: 1440 x 1080
    Pixel Aspect: HD (1440 x 1080) (Does this mean the pixels are 1.333... times wider than it is high?)
    EXPORT USING QUICKTIME CONVERSION
    When I go to export this clip using Quicktime Conversion under the Options... Size... dialog and look at the Dimensions dropdown, (I assume this is the dimensions of the exported video. Is that correct?)
    Some of the settings are (the settings are in quotes, my notes are in parentheses.):
    "HD 1440 x 1080 16:9" (if pixels are square this is 4/3)
    "HD 1920 X 1080 16:9" (if pixels are square this is 16/9)
    So both of these settings claim to be 16:9 but they both can't be true unless they have different pixel aspect ratios (which I find hard to believe). This makes me think I don't really know what they mean when they notate something as 16:9. Can anyone give a definition that will help me here?
    EXPORTING FOR THE WEB
    Using FCS2, what settings should I use to export this clip undistorted for the web (with letterbox if needed)?
    Thanks for the help,
    Rob:-]

    What I find with HDV 16x9 1440x1080 footage, is that when you output for the web you have to hard code the size you want the result to be. 320x180 or 640x360 for example scale things nicely. If you want bigger, just do the math.
    I don't know why but whenever I select a predefined output size, it always screws it up (I don't work with 4:3 ever, so I'm speaking only of 16x9). So I always enter the size I want.
    And as far as Compressor 3, I really can't get that to set the size I want correctly either. Mostly its due to me being lazy and not wanting to spend a year reading the Compressor manual. A package that should basically have the easiest interface known to man is now so complicated that unless I have to hand-holding tutorial, or get to drag/drop one of their presets, I end up screwing things up with it. Not to mention that you get to wait for hours just to see how you screwed up the settings of your output.

  • What is the username and password for the web page on the hp deskjet 2540 printer?

    I need to administer my Deskjet 2540 through my web browser, but do not know the username and password. When it says log in it says 'The server http://[ip adress] requires a pasword. The server says: admin.' I have tryed to use admin as the usermane and no password but it does not work. Is there a way to reset the pasword?
    Thanks

    Hello there @Aokvilla , Welcome to the Forums!
    For the issue you are having, I would recommend trying a different web browser for starters, and if that doesn't help, follow the instructions below from another post with a resolved solution. If those steps don't help, the problem could be your router.
    HP printer requires a username and password by @pcwizard 
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • What is the ir3245 default user and password for the web interface?

    I want to access our ir3245 via web interface ... need to try the default name/password.  If that doesn't
    work I need to know how to reset it to factory default so that it will work.
    Thanks for your help.
    Richard

    Hi Richard, thanks for posting.  Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you!  If you don't have a dealer, please call us at 1-800-OKCANON (652-2666) and we will be happy to provide dealers who are in your area.

  • Change/Configure Host and Port for the Web Service Proxy with Server

    Hi,
    Is there a way to configure Host and Port in generated proxy for Web service depending upon server. (ADF 11g)
    Scenario:
    We are consuming Credit Card web service from a service provider and have different Host and Port details for development, QA and Prod.
    So we created proxy classes using wsdl for development and things work fine, but when deploying code to QA or Prod we need to change the Host
    and Port details.
    Is their a way we could user variable's for Host and Port which looks to some configuration file to evaluate their values
    based on server.
    I am a bit new to this web service .. will appreciate if someone could provide an example.
    Thanks.

    Are you using Web Service Proxy or Web Service Data Control?
    If you are using Web Service Proxy. Right click on your Proxy --> Properties --> Port Endpoints. Here you can change the IP & Port details for each port.
    Venkat

  • How granular can you be with access and layout for the OEM console?

    Can different users have different view of metrics collected from different managed hosts? Can one user see only databases being monitored, but not Weblogic application servers, for example?

    By creating Groups for specific targets and authoriizing access to these groups you can have users only "seeing" databases or certain databases and other users only being able to see certain Middleware components etc.
    Check
    Oracle® Enterprise Manager Administration
    11g Release 1 (11.1.0.1)
    http://download.oracle.com/docs/cd/E11857_01/em.111/e16790/group_management.htm#DAFFHDCJ
    for this
    Regards
    Rob
    http://oemgc.wordpress.com

  • Save for the web - Colors and Shift key

    Hi Everyone,
    With CS3 and Save for the Web, while saving a transparent image using GIF, you could use the Eyedropper Tool (i) and hold Shift key to select multiple colors at a time ON the image itself.
    Trying this in CS4 and it doesn't look like it's working. Anything changed? No I have to select the colors one at a time and this is painfull when you're on 256 different colors.
    Thanks!

    It would appear this functionality is no longer available. Shift clicking on the swatches is, though that doesnt help much here.

  • Export for the Web and File Naming : Batch problem in Photoshop CC

    Is it possible to use "File Naming" when you are using in a batch "Save for the Web" export ?
    What I want to do:
    I have images that I need to resize, crop and rename (change "filename.jpg" to "filename_850x490.jpg" and make an optimisation for the web
    I want to create an action that I can use in a batch
    What is working :
    I can use my action (resize, crop, save) and use file renaming option if I use "save as" options
    I can use my action (resize, crop, save for the web ...) but the file renaming option are not use at the export,
           So I have to create two actions (one for resize, crop and rename and an other to compress images with "save for the web"
    ==> What's wrong with "File rename" and "save for the web"?
    Thank You for support !
    My Environement :
    Photoshop CC : last update
    OS : Windows 8 Entreprise - 64 bits
    Proc : Intel Xeon CPU E5 3.00 GHz - Ram : 8 GB - GPU : AMD FirePro V5900 (FireGL V)

    Probably a lot easier if you use the Image Processor Pro script
    (part of Dr. Brown’s Services 2.3.1)
    http://www.russellbrown.com/scripts.html

  • Problems with PSE 10 when saving for the web.

    I'm having problems saving for web with PSE 10. I edit in RAW, edit in PSE 10, save as Jpeg, resize and save for the web.  Results are muddled and not sharp (looks cartoonish). Also, there is no metadata when you look at the image properties.  I uninstalled the program and installed again. No change.

    Are you resizing the photo before save for web?
    What settings are you using in the save for web dialog for the jpeg quality?
    If you compress the jpeg too much (low quality settings below 60), that can make your photos look bad.
    And save for the web in pse 10 automatically strips any metadata in order to keep the file sizes smaller.
    Also, the save for web in pse 10 has a bad habit of not remembering your last used settings, so it's good to verify that your actually set to jpeg instead of the default GIF setting.
    Message was edited by: R_Kelly

  • Save for the web

    When I "save for the web" in Photoshop, why does Image Ready open? This adds time to my workflow.

    I had 2 computer crashes - laptop and desktop at once. I only had Phostoshop CS but due to problems with Windows 8 etc. Adobe gave me a link to CS2 so I could still use Photoshop. On the desktop, I made some kind of setting where "save for web" stays in Photoshop, but on the laptop I evidently didn't make the same choice and "save for the web" goes through Image Ready. Any thoughts on that?
    Thanks for any all replys.

  • Why can't font graphics for the web be created with sophisticated "hinting" in Photoshop?

    It seems when a font is generated as a web graphic -- either a GIF or a high quality JPEG -- it never looks as clean as live fonts in HTML? I've been researching fonts a bit, and apparently they come with built-in "hinting" that makes them appear better on screen. But if you set the same type in Photoshop or Illustrator and export for the web, it's blurrier and never as good. Is there a way around that?

    http://en.wikipedia.org/wiki/Subpixel_rendering

  • Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

    Hello,
    For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
    "Page temporarily unavailable. We will return soon."
    "We are working quickly to resolve the problem and apologize for the delay.
    Check back later or visit our website for status updates.
    In addition, you can get help in the forums of the Creative Cloud.
    Thank you for understanding!"
    (I used Google Translate)
    Somebody help?

    You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
    One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
    This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
    The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
    Post screenshots of your results or send me a private forum message with the information.

  • Learning Project Managment for the web

    Can any one point me to some good readups on "project managment cycle"
    the only good readups I have found so far are from www.macromedia.com
    I'v got to do a project laying everything out, scrapbook to design
    process etc right up to the actual web page creation.
    Chears for any help! Phill:-)

    Just in case a visual will help you, here's a quick tutorial about scaling for web:
    1) Go to File > Save for Web
    2) This will open a dialog with lots of options for saving.
    The area marked as "A" is where you would choose the file type for your image, which, as John said, would be a .gif or a .jpg, or a .png if your document has transparency.
    The section Marked "B" is where you can easily resize your document. Unless you click on the chainlink icon beside the dimension boxes, your image will automatically retain its proportions when you enter a new value for height or width. Also be sure to tick the "Clip to Artboard" option so you don't get any extra objects that may be lingering in your workspace.
    I would also agree with John when he says to recompose in an artboard in the desired dimensions of your final image intended for web. And you're exactly right about the multiple artboards for different devices. In the screen shot below, I have an artboard in the dimensions of your original document (1022x1021) and one for the dimensions of an iPhone screen. This makes it really easy to modify compositions based on the sizes and proportions of different devices.
    Here is a link about preparing graphics for multiple devices: http://codebycoffee.com/2010/12/08/preparing-graphics-for-multiple-mobile-platforms/
    I hope this helps! If you need more web assistance, don't hesitate to post in the Dreamweaver forum!

  • How can I view my full billing history for the app and music stores without iTunes installed?

    I just received an email receipt from Paypal showing a $12.99 purchase from iTunes. I almost NEVER purchase anything over around five dollars in the app or music store. Since PayPal does not show what this purchase was for, I have not received the receipt from Apple yet, and I cannot find anyway to look up online what this purchase was for....I need help to find out ASAP what this purchase was. If my account has been compromised or if I have been incorrectly charged for something, I would like to get the issue handled immediately. I do not want to install iTunes on my PC (nor should I have to for Pete's sake), but I cannot see anything recent at all in my app or music history on my iPad (not that I would ever purchase anything for $12.99 anyway...I just don't). Thanks in advance for any tips!

    How can I view my full billing history for the app and music stores without iTunes installed?
    No.
    If my account has been compromised
    If you even think this may have happened, immediately change your password.
    See this -> Apple ID: Changing your password

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

Maybe you are looking for

  • Remove unwanted Adobe Acrobat Create PDF Add-on

    I just can't believe Mozilla allows this! I installed Acrobat XI Pro for Mac and without my permission Adobe installed a Firefox add-on called "Create PDF". I can't uninstall, remove or delete it. I can only disable it. It's the only add-on that has

  • ADS not working for a specific input

    Hi everyone, We have a Z form rendering payment remittances from transaction F110 by specifying the payment run, company code and the printing details. When we print for company codes A and B using printer printerA (printer with HPLJ device type), it

  • Alert Mechanism Vs Email Adapter? please help!

    Hi Experts,        I have requirement where I have to send error info as email. The email has following characteristics: 1. Content is multi-line. 2. Data is dynamic. 3. Content has to be formated. Like header, footer and '---' lines as separaters. 4

  • Music Libr

    I have a problem with the way you import file into the PlayCenter... It wants to search the entire hard dri've... I have alot of games on this hard dri've and I really don't want to import all the wav and mp3 files into the library just to have to go

  • Budget effected for current year for changing a PO of last year

    Dear Controlling firends, I am a MM guy and facing the titled difficulty. The problem is ,suppose a Po had been created in last fiscal year and at that time budget for last year has been consumed as committed. But now when I am changing that particul