Management Agent service not created with 10gR2 RAC DB install on Win2003?

Our 10gR2 RAC installation on Win2003 platform didn't create management agent service. After installing and setting up current release of OEM with Grid Control (10.1) and installing Management Agent from 10.1 OEM distribution (install additional management agents option), agent service is up and running. However, there is one small problem:
All target configuration xml files are created under 10.2 Oracle home, and agent running from 10.1 home does not see them - which means database, listener, etc are not registered in OEM.
Is this a known problem, and is there solution for it?
thanks,
Dejan Bogojevic
ps. message posted on metalink also

GlobalBank.ESB application will be created only when you run DynamicResolution
Setup.
run \Source\Samples\DynamicResolution\Install\Scripts\setup_bin.cmd to install GlobalBank.ESB application
on BizTalk Server.
thanks Rachit.

Similar Messages

Oracle Management Server Service not created

Hello,
I created a Management Server Repository using OEMCA and an existing SID. According to the details displayed at the end of the wizard I assume that the process was finished successfully:
(NT-Service OracleOraHome81 ManagementServer is started...
Disconnect from oms@instancename....
Returning to connection system@instancename...
Process finished.
Yet the Oracle Management Server Service can not be found in SERVICES in the control panel...and therefore can't be started manually.
I have OS-Administrator Privileges.
I use Oracle 8.1.7 on WinNT.
Any help would be greatly appreciated.
Thanx
Stefan

I have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again.

Virtual Machine Manager database was not created

Hi
I Use this
link to Install SYVM 2012 SP1 on My lab .
But When i got section "Install VMM", The installation Give me the following error .
The Virtual Machine Manager database was not created.
The Virtual Machine Manager database was not created. Delete VirtualManagerDataBase.mdf and VirtualManagerDataBase_log.ldf if they exist at or use a unique name for the database. Also, verify that disk quota management is not enabled for the drive where the database is being created. Then run Setup again.
how to fix it ?
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

I also disable the firewall on SQL Server , but doesn't work .
Now i Create data base manually and i can cross that error , but it stop with this new error
Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

Invoking a web service not created using oracle web service lib

Hi All,
I have a need to invoke my web service from oracle sql command. My web service not created using oracle web service library, but it is created using axis c++ libraries. Is it possible to do so,
Thanks in advance,
Regards,
Monica

In order to call out from the database process, is SQL (or PL/SQL) you need to generate some client code, that understand the details about the specific of the service you want to invoke and can produce the correct SOAP request. Once this proxy is uploaded in the Database, you can use it.
There is a set of Database Web services samples that should help you get started. You can also take a look at the developer's guide - see Developing a Web Service Client in the Database.
Hope it answers your question.
--eric

Files not created with iTunes do not play from remote iTunes library

I hve ripped a large part of my CD collection into music files into FLAC format. I have since converted my music files from FLAC into Apple Lossless Audio Codec (ALAC) format and imprted them into iTunes.
The files play with no problem on iTunes if they are on a local iTunes library. Furthermore, all metadata such as tags and album cover art information are properly displayed in iTunes. This is true whether I'm running iTunes on a Windows XP box or a Mac OS X box. I have since imported many other CDs into my iTunes library using iTunes to encode into ALAC.
If I share the iTunes library on my Windows XP machine to iTunes running on a Mac OS X box or to an Apple TV, I can:
*play songs that were imported directly using iTunes
*not play any songs that were not created with iTunes
This behavior is true whether I'm trying to play them from either a Mac or from an Apple TV.
If I copy the *.m4a files to the Mac and import them to the iTunes library I have no problems playing them on the Mac. I have not tried sharing the iTunes library on the Mac and tried accessing the files from the Apple TV or the Windows PC.
Any thoughts?

Fix: optimize m4a files moving the meta data to the beginning, whilst optionally creating a hint track (used for streaming m4a over Apple Airtunes).
see: http://www.dbpoweramp.com/codec-central-m4a.htm

Pl/sql Procedure is Not Creating With the CLOB data Type

Hi,
I am Using Oracle 10g Express Edition Release2.... My Doubt is While creating a table With CLOB Data Type the table is created successfully,but while Creating a Procedure With the CLOB Data type i am getting an Error Message
2667/5 PL/SQL: Statement ignored
2667/24 PLS-00382: expression is of wrong type
then i tried With the Varchar2(30000) the Procedure is Created Successfully note i have not changed any thing in my code except the data type.
I am Just Confused ......Why the Procedure is not Created with CLOB Data type?
Please advice ...
Thank U
SHAN

hi,
Thanks for reply....Another Example
CREATE TABLE USER_MAS (USER_ID VARCHAR2 (20 Byte),MAIL_ID VARCHAR2 (255 Byte));
set serveroutput on
declare
atable varchar2(64) := 'USER_MAS';
acolumn varchar2(64) := 'MAIL_ID';
avalue varchar2(64) := 'NEWYORK' ;
dyn_sql clob;
begin
dyn_sql := 'update '||atable||' set '||acolumn||' = '''||avalue|| '''' ;
dbms_output.put_line(dyn_sql);
execute immediate dyn_sql;
end;
commit ;
Error at line 2
ORA-06550: line 9, column 23:
PLS-00382: expression is of wrong type
ORA-06550: line 9, column 5:
PL/SQL: Statement ignored
When i Changed the Data type to varchar2(64)
update USER_MAS set MAIL_ID = 'NEWYORK'
PL/SQL procedure successfully completed.
Commit complete.
I like to Know the Reason Why the Procedure is Not Created in Oracle 10g XE DB
Note :the Same Script i used in 11g DB the Procedure is Created Successfully....
Why you need use CLOB or VARCHAR2 in your temp_num variable as you sending parameters as number?
In the Procedure we are create some run time queries while executing the procedure. There are around 10 run time queries created.
The size of each query is more than 4000 characters . We then add all the queries using union all after each query to the clob variable as the normal varchar will not support.
Please Advice
Thank U
SHAN

OracleHome92 agent service not started

hai All,
I renamed my windows 2003 server machine. After rebooting the server a message appears that oracle intellegent agent exectable encountered a problem and needed to close. After that I noticeed that The oracleHome92 agent service not started. I cannot able to start that service.some eror occurs.... need any extra change?
Please help?
Shiju

You wrote: "Some error occurs"
Let me rephrase that for you: "My car won't start tell me why."
No one can help you if you don't post relevant information.
My advice ... Stop doing things when you don't know the implications. That is why testing environments exist. Rename the server back to its original name and then learn what to do, and test it, before doing it again.

Shared Memory Service Not Created Yet

Hi Everyone,
I had to get a new printer because the baby did something to my old one and now it won't print clearly. I got an HP Officejet 4315 because it was the only one that said it supported 10.2.8. When I installed the software, I got a message saying, "Driver Not Installed." I checked the HP website, and they said to install the BSD from my CD's, which I did, now when I click on "HD Assistant" I get a message saying, "Shared Memory Service Not Created Yet."
I can't find anything on the HP or Mac websites about this error message. I e-mailed HP Support, they said to repair permissions and re-boot, which I did, but I still get that error message.
Please don't tell me to buy a new computer so I can get a new OS, because that's not financially feasible at the moment, since I'm a stay-at-home mom.

You're Welcome Lizzy!
Upgrading your Mac to Panther 10.3.x would be quite painless, and depending on whether it meets the Panther System Requirements, and the Additional Panther System Requirements, also relatively inexpensive.
If you know what to look for, a Full Retail Version, of the Panther Install CDs, can also be purchased rather inexpensively, at some additional online Apple retailers, Amazon, eBay, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, or CPU Drop-in DVD, on them.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
Shop Carefully, Examine All Documentation, And I Wish You Success!
Also, Thank You, for extending the courtesy, of awarding in Discussions.
ali b

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Why Toshiba notebooks are not delivered with the common Vista install CD

Our household now has two x Toshiba laptops, both of which were supplied with MS Vista Home Premium pre-installed.
The nature of the Recovery Media provided with these machines is such that (a) we do not have sufficient flexibility over volume/partition sizes, program locations etc., and, more specifically.
It makes it necessary for the majority of the bundled software (Norton Security etc.,) to be installed by default in the event of a system failure. (And immediately uninstalled following recovery! An unnecessary waste of time.)
Bearing in mind that a proportion of the price paid for each laptop must have included a cost for the Vista Operating System, does anyone know if it is possible to obtain a Master Recovery disk which ONLY consists of the operating system, and which allows us the flexibility of configuration which used to be available when the OS was purchased as a separate product.
Additionally, please let me know if it is possible to purchase Toshiba laptops as a RAW machine, i.e no OS supplied, and I will then buy my own and cut out the rubbish which is supplied on the pre-installed media.

>Why Toshiba notebooks are not delivered with the common Vista install CD?
The answer is very simple: software is bundled to hardware and when you buy notebook you buy license for preinstalled Vista version and you can install recovery media so often you want and it belongs JUST to your notebook model. It cannot be used with other notebook or PCs.
If you get usual Vista installations DVD it can be installed on each computer system. For such purposes you must buy Microsoft installations DVD.
As you already wrote Toshiba recovery image contains much software that can be not useful for you. You can remove it from the system and nobody force you to use them. I do the same.
After clean OS installation the first thing I do is to remove or software I don't need or I don't like.
I optimise preinstalled OS on my own.

My i-pod nano did not come with the CD to install software.

My i-pod Nano did not come with a CD to install the software to computer. How do I install software without CD?

The second generation iPod nanos do not include a CD; instead, download and install the latest version of iTunes on your computer to install the iPod drivers.
(18706)

Paanu ba idelete ung Facebook sa settings? Kahit anong enter ko ng password ang Lumalabas ay could not communicate with the server.inan install ko na sya,pero andun prin sya sa settings.sa google chrome pa aq pumupunta para LNG maka log in.thanks.

Paanu ba idelete ung Facebook sa settings? Kahit anong enter ko ng password ang Lumalabas ay could not communicate with the server.inan install ko na sya,pero andun prin sya sa settings.sa google chrome pa aq pumupunta para LNG maka log in.thanks.

My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard, what can i do?

My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard (iTunes does not recognize the iPhone anymore) , what can i do?

Try removing and reinstalling AMDS:
http://support.apple.com/kb/HT1747
(I requested deletion of your duplicate post.)

My new TC did not come with a disk to install the AP utility.

My new TC did not come with a disk to install the AP utility. It is flashing amber and I have no way to figure out why. I have downloaded recent and prior AP utilities but they don't load to my computer. Please advise.

What operating system is your computer using?
If you have a Mac, click the Apple icon in the upper left corner of the screen, then click on About This Mac. Post back with the OS X Version number that you see there.

SDM agent is not registered with SDM server of Solution Manager server

Hi,
We are in process of configuring EWA report for JAVA stack of SAP system along with ABAP stack. For ABAP stack the EWA report generation is straight forward and it is working fine. We are facing the problem while configuring EWA report for JAVA stack. Pls. find below the steps that we have followed and currently where we are stuck,
1) Installation of Willy introscope on Solman server.
2) Define JAVA component for each SAP system in SMSY
3) Installation of SDM Agent on all managed systems
4) Trying to attach SDM Agent to SDM server(solman) with the use of smdsetup.bat (managingconf & sldconf ).still we are getting error in smd agent log file as given below:
===============
Nov 24, 2011 6:16:09 PM [Thread[Connector,5,main]] Info       [p4://xxxx.xxxx.int:8103] Checking server availability...
Nov 24, 2011 6:16:39 PM [Thread[Connector,5,main]] Error      Failed to connect to SMD server - user: SMD_ADMIN
Nov 24, 2011 6:16:39 PM [Thread[Connector,5,main]] Warning    Connecting to SMD server p4://xxx.xxx..int:8103 failed - error counter: 0 - com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances
*     Nested exceptions are:*
*     com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: xx.xx.xx.xx and port: 8103*=================
5) The solman_setup t-code execution is successful in Solman server.
6) Trying to configure Technical system for JAVA system type through solman_setup : At this time we are getting another error as shown below:
========
The Managed System does not fulfil the Diagnostics prerequisites
Software with prerequisite are incorrect: Found SAP J2EE ENGINE 7.00 with sp level 0, minimum sp level required is 9: Please install or upgrade the required software component.========
I have gone through the SAP note: 1274287 : My solman system is already on the required patch level for LMservice and St 400 SP. Also, the managing systems Java patch level is more then sp06 which is minimum level required.
I need your help to know, why i am getting this SAP J2EE ENGINE 7.00 patch level error although my Java stack is up to date with the required patches.
Waiting for your reply friends.
Regards,

Hi,
please let us know your solman version.
check and apply the sap note
[Note 1277258 - Diagnostics prerequisite check failure|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1277258]
Thanks,
Jansi

Management Agent service not created with 10gR2 RAC DB install on Win2003?

Similar Messages

Maybe you are looking for