Management agent upgraded to 10.2.0.4 - getting error Failed to start LSNR

Hi all,
I have just upgraded the management agent upgradation to 10.2.0.4. I am getting this error error 'Failed to start HTTP listener.'
I had killed the agent process at the o/s level and restarted it but again after a while it shuts down automatically.
Also my emctl status agent still shows the agent version as 10.2.0.2 ??? Please let me know what to do in this scenario.
Will appreciate your early response. ... Thanks & Regards, Deepak

can you report the status of this command and screen output
./emctl status agent
Ss

Similar Messages

After iPad ios 5 upgrade, itunes "interrupted while restoring" restore gets error -50. iPad starts in 'configure' mode - can I configure as 'New iPad' and then restore?

After iPad ios 5 upgrade on Win7 64bit pc (x386 iTunes), iTunes gave me error "iTunes was interrupted while restoring, restore again now?" I try to restore but iTunes immediately gives error -50. Apple website says -50 is a timeout, but I have tried all fixes: changed usb ports, new cable, reset iPad, restart pc, remove sim... no good.
iPad starts in 'configure' mode, but won't restore from any of the several iTunes backups I have. Ready to giveup on 'restore'! iPad is sync'ed in iTunes, connects and syncs ok, so I don't want to lose that info.
Can someone from Apple advise - can I 'configure' as 'New iPad' and then restore or sync to recover my Apps and data etc? OR if I 'Restore' from iTunes 'Summary' tab, will I still be able to Sync to restore the iPad Apps and data?
I'm seeing a lot of frustrated Apple users online, hoping that a fix for this problem will help a few of us!! An iOS upgrade should not cause this much pain and wasted effort.

You might already have tried all of these, but just in case:
1. Make sure you have the latest version of iTunes.
2. If you're on a Windows PC, consider uninstalling iTunes and Quicktime, restarting the PC, then reinstalling. This sometimes fixes oddities.
3. Make sure you have no firewall or anti-virus running/active.
4. Try different USB cable; if you're using a cable via a hub, try connecting without the hub. On desktop PCs, the direct (non-internal-hub) USB sockets are usually at the back.
5. If yoiu haven't already done so, download the iOS5 update via the direct links I posted above
6. If using Update doesn't work, use Restore. Option-click (Mac) or Shift-Click (Windows) the Restore button in itunes.
7. Before you to the Restore, right-lick the entry for your device in iTunes and choose Backup from the drop-down menu. You may need this backup later.
If you're srtuck in recovery mode:
- There are some tips here for Windows users
http://thehowto.wikidot.com/ipad-stuck-recovery-mode
- If your device is stuck in Recovery mode, you can try putting it into DFU mode, from which iTunes should be able to Restore, as above. Details here:
http://www.tipb.com/2010/12/02/tip-put-iphone-ipad-dfu-mode/
- This link points to a utility that can help (Windows and Mac)
http://runningblind.com/post/2800674985/ipad-stuck-in-recovery-mode-for-no-reaso n
I hope something here helps

I am unable to get my Ipod touch 4g to upgrade to ios 5 I keep getting error messages every attempt?

I am unable to get my Ipod touch 4g to upgrade to ios 5 I keep getting error messages every attempt!
any ideas on how to fix this?

mine iphone4. same. Apple admin, answer to fix it?

I am upgrading to iOS 5. I get error (-37) from iTunes whe it is backing up the phone. What's is that error and what can i do to fix it

I am upgrading to iOS 5. I get error (-37) from iTunes whe it is backing up the phone. What's is that error and what can i do to fix it

I get the same error when trying to update an iPhone 4. Any suggestions?

Desktop Management Agents Upgrade

Hi,
Eventually in a few months I'll be upgrading our current student server at
the High School I work at from Netware 6 and Zenworks 4.01 ir6 to Netware
6.5 and Zenworks 6.5.
Each of the computers connected to the student server have a Zen partition
installed for imaging purposes and all the up to date desktop management
agents.
If I update from Zenworks 4 to Zenworks 6.5 without updating the Desktop
Management Agent to Zenworks 6.5, will the imaging, remote control, policy
packages, NDPS printing not work anyomre or will it all still work even
though the Zenworks version is 6.5 but all the computers have Desktop
Management Agents 4.01 ir6? I would like to update to Zenworks 6.5 and
slowly update the Desktop Management Agents(from Zen 4 Desktop Management
Agents to Zen 6.5 Desktop Management Agents) in each computer lab over
time, but if it's going to effect the imaging server policy, user policy
packages, remote control, NDPS printing etc... I'll have to plan the
upgrade over the summer time.
Thanks for your time!
Brad Pilon

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Upgraded from Win7 to Win8 and getting errors. Any way of going back? U410

Hey guys,
I just recieved my Ideapad U410 today and I was so psyched! I'm going to a seminar tomorrow, and since this is my only laptop, I really want it to work, so I can use it tomorrow.
Anyway. I figured that I might aswell just upgrade to Windows 8 right away, so after using the computer for maybe half an hour, I pay for Windows 8, and just do the install through the Windows 8 offer.
Windows 8 gets installed, and now I just keep getting errors. First of all, the Energy Management program didn't work and kept popping up everytime I restarted the computer. I downloaded a new driver for it, which seemed to fix it.
At the same time, a pop-up from Dolby Home Theater keeps popping up, telling me to install a valid driver. I've tried installing one, but either I didn't find the right one, or it just didn't work.
Then my WiFi starts going mental! After restarting the computer, it doesn't connect to the WiFi. It just sits there until I right click it to go into "Open Network and Sharing Center", and then it just hangs until I try to close the window. More hanging...... then the window closes and boom! I have WiFi!
The WiFi also started getting slow. Now I have read about the WiFi issues, but my computer was manufactured on 8/25/12, so there shouldn't be any! ....right???
I'm now thinking of doing a clean install of Windows 7 to get it to work, but I'm hopelessely confused about how it works now that there's an SSD drive in it too. I'm used to just being on an old desktop with ONE harddrive, not all this fancy new stuff
So......... basically what I'm asking is:
- Is there a way to get my Windows 8 to work? Fixing the WiFi "hanging" and the Dolby Home Theater error?
- Am I safe from the WiFi issues since my computer was manfufactured on 8/25/12?
- Is there a guide that can show me how to do a clean Windows 7 install? Or maybe even get it back to how it was when I first recieved it?
Any help is GREATLY appreciated, guys! Thanks in advance!!
Philip
EDIT: Picture of my upload speed being much higher than my download speed. Looks like I'm affected by the terrible WiFi too. http://speedtest.net/result/2359883449.png

Sorry, Apple does not support downgrading.
As to apps disappearing, it's not uncommon for apps to be removed from the app store. I have a couple of games that I play that are no longer available.
Did you install 8 'over the air'? If so, research into doing a restore. Use a computer to back up your device and then reinstall iOS8 via a computer, and then restore your data from the backup. Sometimes a clean install clears away glitches caused by over the air installs.
If you just wish to express your frustration to apple, on the lower right corner of this page is a 'contact us' link. Send them feedback and let them know.

Error-- failed to start a managed process after the maximum retry limit

hi
I installed oracle 10g application server. its installed fine. But now i am facing a problem in which i am getting the following error message when i try to start opmnctl from command prompt:
opmnctl: starting opmn and all managed processes ..
======================================================
opmn id=apps:6200
0 of 1 processes started.
ias-instance id=orcl.apps
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
-->Process (index=1, uid=1845537884, pid=1320)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\oracleAS_1\opmn\logs\\default_group~home~default_group~1.log
Please help me in order to remove this, so that i can run oracle apps.
Regards,
Aqrs

Hi
i checked the log already but there is not such problem defined in it.
Following is the log generated ion this error:
Configuration information
Running in D:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:D:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:orcl.apps
Instance type:allProducts
Version:10.1.3.1.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, orabpel, oraesb, owsm, Wsil]
2009-06-03 01:46:58.609--Begin log output for Mid-tier services (orcl.apps)
2009-06-03 01:46:58.625--Processing Step: starting OPMN
2009-06-03 01:47:07.921--Processing Step: starting OPMN managed processes
2009-06-03 01:48:47.312--End log output for Mid-tier services (orcl.apps)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     ... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
     at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
     at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
     at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
     at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
     at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
     at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
     at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
     ... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="apps:6200" http-status="204" http-response="0 of 1 processes started.">
<ias-instance id="orcl.apps">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="1848837552" pid="3128" status="Stop" index="1" log="D:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
Could u plz guide now ?

Tried to upgrade to iOS 5 and keep getting error message 1611.

I plug in my iPad and try to upgrade to the new iOS 5 and it restored the iPad and now I'm getting error message 1611 and it won't even let me use my iPad right now, it's stuck at the start screen with the sync cord and iTunes logo... HELP...

I had a similar problem -- but found a simple fixe here.
All I had to do was move my USB cable from a port on the side of my computer monitor to a port on the computer itself.
Easy!
Funny thing is, the original setup worked fine when I upgraded my iPhone 4 earlier in the afternoon, and I've synched my iPad 2 using it hundreds of times. But it wouldn't do the upgrade for the iPad.
Hopefully it will work for you too, and others that may read this thread.
-Tom in SoCal

After upgrading to 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the store

After upgrading to iTunes 10.3.1 I get error -50 on startup and 1008 when I try to sign in to the Store. How do I fix this?

I got the solution from another post...
use the Finder to navigate to /library/preferences/SystemConfiguration and delete NetworkInterfaces.plist ( you will be prompted for username and password), then reboot. You will get a message about new network interface found--just reset the network info.
That did it for me.

After upgrading to 10.0.2 I get "Error:Platform version 9.0.1 not compatible with 10.0.2" and I have to reinstall ver 9

I'm, running WinXP Sp3. I downloaded 10.0.2 and installed it as an upgrade as I have done successfully with all other new versions. It installs, but when it tries to load I get the following error: Platform version '9.0.1' is not compatible with minVersion >= 10.0.2, maxVersion <=10.0.2. I then have to run Win Uninstall, and then reinstall 9.0.1 to be able to get back online.

If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
See:
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/880050]]

Trying to upgrade my ipad mini to ios7 get error 3014 .have tried most of suggestions , ipad has image asking for connection to itunes. and around and around I go

Trying to upgrade ipad mini to ios7. extracts software but wont restore it . error message 3014..ipad no longer working, just image asking for connection to itunes.Have tried all the troubleshooting suggestions I am capable of. ((((((

There is some troubleshooting for error code 3014 on this page : http://support.apple.com/kb/TS3694
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

TS3694 Upgrade an iPod Touch to iOS6 getting error message 3014

I am trying to upgrade an iPod TOuch 4 Gen to iOS6. I get the error message 3014. I tried all the suggestions on the refered webpage but still get teh mesage that it can't restore the iPod.

See this Discussion...
https://discussions.apple.com/message/16477908#16477908

HT4864 Currently upgraded to new Outlook 365, but getting error 5.7.8, the incoming message works, but not outgoing. I've double checked in MAIL

This is the error I'm getting.... I've pasted my password which is the same for incoming & outgoing.

I got the message with Outlook 2007. The odd thing is that I have been using Outlook 2007 to read my @me email for the past six months. Everything was working fine until today. All of a sudden, outlook won't send any mail. I can receive main but will not send. When I tested my settings, I receiced the same error message.

Installing Management Agent

When installing the management agent on a Windows 2000 System, I get the
following error (Status = Fail) (Reason = Fail to start service), and it
seems there is nothing installed on the 2000 server.
Any ideas?
With regards,
Rocco van der Veer

[email protected],
>I get the
>following error (Status = Fail) (Reason = Fail to start service), and it
>seems there is nothing installed on the 2000 server.
Is anything reported in the event viewer?
Is a log file created in c:\novell\zfdtemp?
If so, feel free to post it.
Jared
Systems Analyst at Data Technique, INC.
jjennings at data technique dot com
Posting with XanaNews 1.17.6.6 in WineHQ
Check out Novell WIKI
http://wiki.novell.com/index.php/IManager

Upgrading Solman from SP 17 to EHP1 errors with the Kernel install

I've been trying to upgrade solman to EHP1 but I get errors when I try to install Kernel 7.01. After I have copied the kernel to \SYS\exe\uc\NTAMD64 I can start SAP and for a while it works. Then SAP stops working and both services stop. I've tried to restart the services but I get and error telling me its the wrong product version and to re-install the software. Its a 64bit unicode kernel on windows 2003 64bit and I have the right kernel. Any ideas anyone?

HI
I am having the same issues. when upgrading via JSPM or manually, the sap services won't start and keep saying the version is incompatable, and suggested to reinstall.
Did you manage to get around it?
Regards
Kevin

Management agent upgraded to 10.2.0.4 - getting error Failed to start LSNR

Similar Messages

Maybe you are looking for