Management Cockpit
Hi,
When i delete the data in the cube and reload the data to cube the data is not updating in the Cockpit.Requriment is want to remove one of the date in the Cockpit,deleted the same in the cube but no reflection in the cockpit report.Can you please help me out.Checked all the Authorization everything is fine and UMM_ADMIN.
Thanks=Points in SDN
Sanjeev
Hi Sanjeev,
I believe that you have linked your BEx query to your cockpit frame, right? In that case, did you check if your BEx query is showing the new data? you can just run the query in the BEx broweser and see the results. If the query is not giving the right values, then you won't see them in the frame. If the query is showing the right values then you can check the query proerties and see whether it is still released for other applications. If the query is showing the right values and the query proerties are right then you can refill the buffer and check the buffer ( if you have authorization for viewing the tables). If the query, query proerties, buffer everything is fine and still you don't see right values in the cockpit frame, you can create a new frame and link the query to that frame and see if that shows the right values. If the new frame shows the right values and the old one doesn't , then you can troubleshoot the old frame. If both the frames show wrong values and the query and buffer show the right values, you should open a ticket with SAP support.
Regards
Pravin
Similar Messages
-
Hi,
I am working on SMP 3.0 SP 02 ->cordova 3.3.1 - 0.3.1, i am able to ping the Odata endpoint in Management Cockpit successfully. I followed the steps which are present in the getting started with kapsel - 2 (use of logon plug in). i am able to register to SMP 3.0 server by using register.html on the machine that SMP server is running but not from other machine using port 8083. Also if i try to use registration2.html which uses login plugin am getting the errors. Please help me out with this error
{"errorCode":"80003","errorMessage":"Unable to reach Backend URL","errorDomain":"MAFLogonCoreErrorDomain"} at file:///android_asset/www/plugins/com.sap.mp.cordova.plugins.logon/www/common/modules/Utils.js:4
Thanks
Varsha<<I am able to register to SMP 3.0 server by using register.html on the machine that SMP server is running but not from other machine using port 8083.
As mentioned above, by default port 8083 is used only by the management cockpit. Try using the HTTP port which by default is 8080.
The ports are configured in this file.
C:\SAP\MobilePlatform3\Server\config_master\org.eclipse.gemini.web.tomcat\default-server.xml
If the registration fails one quick test to verify basic connectivity to the SMP 3.0 server from the device or emulator is to open the following URL from a browser on the device or emulator.
http://SMP_Server_IP_Address:8080/sapui5/
If the above URL opens correctly in a browser on the machine that the SMP server is running on but not from the browser on a mobile device or emulator there is likely something such as a firewall preventing communication over port 8080.
Here is a link to the Getting Started With Hybrid or Kapsel for SMP 3.0 document.
Getting Started with Kapsel - Part 1
Regards,
Dan van Leeuwen -
Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (managment cockpit)
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshNaresh,
Couple of suggestions...If this thread is still relevant....or please close this thread...
1) Make sure you are not having any issues with running the query, try running it directly in BEX/RSRT.
2)Once we know that there is no issue with teh query...try running the Trace on the user (ST05) to get further details on the error by trying to run it from management cockpit..
3) Check Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
Hope this helps..
Vishal. -
Status of elements not appearing in Management Cockpit
The Problem is as follows:
when you look into the management cockpit and ask to display data from, for
example, December 2004, the cockpit shows all the four walls with
elements without status, when, in fact, all the elements have a status.
You can notice they have a status (green, yellow or red) when you click
and see the detail (for example, the financial situation is shown with
no status, but if you go into financials and then to the general
overview, for example, you can see that you've got maps and status
there. So, in the financial situation you should have a status as well).
I am using SAP_BW 3.10
Looking forward to hearing from you.
Regards,
Deepakhi,
Usually when I browse sourcing area the last work item should be my shopping cart line item.
But I am not able to find the line item in sourcing area,I searched in all possible ways,do you think I missed some sort of settings regarding this.
regards,
IGA. -
Value range(column chart): management cockpit
Hi friends,
how can i put value range condition in column chart. my situation is like this
I have 10 employees with expereinces 4.1(i.e 4 yrs 1 month),5.5, 1.2, 0.5, 3.5, 0.2, 4, 6, 7 and 8.
I want to present in column chart in x-axis like <1 yrs, 2-4,5-6,>7 and in y-axis count.
How can i achieve this. I maintained calculated keyfigues(for <1 yrs, 2-4,5-6,>7) on key figuer total experience and, in bi report i'm getting correct output. Even total experience is also calculated key figure and perfectly viewing this value in cockpit. But in managment cockpit, remaining calculated keyfigues(<1yrs,2-4,5-6,>7) i'm not getting. So i want to prefer to set value range in chart.
pls suggest me.
thanks,
rajuHello Raju,
You can achieve this by simply using a User defined Periodization & Time Variable.
http://help.sap.com/saphelp_sem60ep1/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
Defining Periodizations
1. To define a periodization, choose Periodization in the dialog structure.
2. Choose to switch to change mode.
3. Choose New Entries.
4. In the Periodization column, enter a name for the periodization (up to four characters).
5. In the Fiscal Year Variant column, choose the fiscal year variant on which you want to base the periodization. (The periodization itself is based on periods of the fiscal year variants.)
6. In the Long Text column, enter a descriptive name for the periodization.
7. Save your entries and return.
8. In the list of periodizations, select the periodization you just created.
9. Choose Interval in the Dialog Structure.
10. Choose New Entries.
11. In the Interval No. column, enter a sequential number for each period to be defined, starting with "1".
12. Specify the left time limit (= Start column) and the right time limit (= End column) of the range by entering the respective period of the fiscal year variant on which it is based.
Eg: In your case you follow this
Start Column End Column
Period 1(<1 yrs) 1 12
Period 2(2-4 yrs) 13 36
Period 3(5-6 yrs) 37 60
Period 4(>7 yrs) 61 specify the no. of months you want to calculate for
13. Save your entries and return
In the Cockpit-Frame-Design screen for the mesures(KPI) on the Y-axis you select the check box of Periodization and select this User defined Periodization created by you. You click on the aggregation box too to get the cummulative value for the defioned periods.
Hope this helps. Revert incase of any query or let me know if it doesnot work as I have tried this with quarters and its working fine in my case.
Regards,
Priyanka Singh -
Traffic lights in management cockpit
hey pals,
whats the best way to bring in traffic light status on to the frames in management cockpit.its pretty much easy to bring when u assign tachometer as chart type but will this work for all kinda charts?.....its urgent.....
saggihey pals,
whats the best way to bring in traffic light status on to the frames in management cockpit.its pretty much easy to bring when u assign tachometer as chart type but will this work for all kinda charts?.....its urgent.....
saggi -
How to display hidden columns in Management Cockpit Reports
Hi all,
I need to display columns with zero values in a management cockpit report graph. I think the report had been set to hide columns without values and only brings charactesitics whose values are not equal to zero.
Could anyone help?
Thanks in advance.
SezinHI,
After you are executing the report, on columns right click & select filter options-> if 0 values will be there then you can filter it by 0 & get the report -
How to Build management cockpit in SAP BI?
Hello
I would like to build a technical management cockpit within SAP BI 7.0 to consolidate parameters of data load from ERP, CRM to BI , planning (cycles , etc), authorization and so on.
I have heard that it could be done with DynPro.
Can somebody give me few recommendations how to do it.
ThanksHello,
Web Dynnpro for ABAP has a GUI element called BIApplicationFrame:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/7c/3545415ea6f523e10000000a155106/frameset.htm
With this UI element native Web Templates are supported.
Regards & Thanks,
Guido
P. S.: I don't know if there is BO UI Element or if no if there a BO UI element will be. -
SEM-CPM Balanced Scorecard and Management Cockpit
Hi
Does anyone have any examples(screenshots) of the Management Cockpit and Balanced Scorecard BSP applications?
Thanks
YeteenLeelananda and others PLEASE NOTE!
This original post was in 2006 and Jason does NOT seem to be an active member. His member email bounces so he will not receive any alerts about updates to this post.
SEM-BSC is a product that has been sunset. The current SAP product for using the Balanced Scorecard is SAP BusinessObjects Strategy Management, (SSM).
I would be happy to provide information about SSM if you would like. Contact me directly.
Regards,
Bob -
Hi Guys,
Currently we are working on creating SEM CPM management cockpit and the requirement is as follows,
1.we need to diplay one of the query result directly in the dashboard.(without any graph)
2.We need to create a table display with 3/4 KPI's which belong to different query(for the last 3 months). eg
Month1 Month2 Month3
KPI1 x x x
KPI2 x x x
KPI3 x x x
It would be great if you could help us on the same.
Thanks,
Suthakar MHello Ashok,
In my opinion, this tool cannot be used in Business Objects.
Our [end user documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] does not have any comment. I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk -
Graphs in Management Cockpit SEM 4.0
Hello All,
We have upgraded our BW and SEM systems from 3.0 and 3.1b to 3.5 and 4.0 respectively.
We are now seeing a strange behaviour. In SEM 3.1b, while creating graphs in the management cockpit, we were able to assign specific colors for each column of a graph, say for example.. a custom color for Actuals and a custom color for planned amounts.
However, after the upgrade, we are unable to see any option to customize the columns in the graphs.
Am I missing something simple? Any and all help is deeply appreciated.
Regards
Sunil<i>Dear Jeroen:
For showing tables below any graph in SEM Management Cockpit, you have to select "Data Table" in the design of the graph. Attention: It's possible that you have problem for seeing this in the presentation, because It's probable that you need applying a note.
Please, If you have this error, let me know and I find note's number.</i> -
Problem utilizing Custom Development Management Cockpit
Hi all,
i'm currently trying to use the Custom Development Management Cockpit. When i open a Clearing Analysis project from TA CNV_CDMC it tells me that i have activated the statistics collection for one system. When i try to select this system (via "Define Project Landscape") as the statistics systems, it tells me that the statistics collection is not active on this system. Therefore, i'm stuck here...
Any hints would be appreciated.
Greetings
/MarcApply the composite/collective sap notes for CDMC 1348772 and 1456166. There is a fix in one of these collective notes for the problem.
Regards
Neil -
RRI in Visual composer managment cockpit
Good day all,
if there is any demo and demostration for visul composer managment cockpit?
and how to do RRI in Visual composer.\
Best regards,
dushyant.Good day all,
if there is any demo and demostration for visul composer managment cockpit?
and how to do RRI in Visual composer.\
Best regards,
dushyant. -
Help needed quick!!! How to download a management cockpit?
Hello all,
In three hours I have to give a presentation on a demo of a management cockpit I build. I would like to download the management cockpit and burn it on a cd so the participants can take it home.
How to download a management cockpit?
I know you can download a balanced scorecard so I hope this is possible.
Thanks in advance.
RalphRalph,
You cannot download the CPM MC app as a offline application.The Balance scorecard can be downloaded into an offline application. The only thing thats possible is to use the print functionality of CPM MC.You can use this with the flag measure defination switched on and also set all the required exception settings(red,green,yellow..) and download all the walls,views and frames into a spool file.
Hope that helps.. -
Setting up Custom Development Management Cockpit (CDMC)
Hi Gurus,
Custom Development Management Cockpit (CDMC) available from Solution Manager 7.0 EHP1 SP19 as part of SAP Enterprise Support tools to allow to manage customer changes to support EhP/SPS/ Upgrade projects by determining what custom changes will be impacted by SAP changes.
Question is How to setup Custom Development Management Cockpit (CDMC)? Please help me if anybody already implemented this and any docs will be helpful.
Appreciate your help.
Sincerely yours
SaruHi
Follow the links,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d3/4b21cf15464589b84bc63f0da54530/frameset.htm
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000308632009E
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002008602008E
https://websmp210.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002008602008E
Hope it solves ur prb
Regards
Prakhar -
Enabling a Graphic Frame on the Management Cockpit
hi!
I am trying to enable a graph on one of the frames in a management cockpit.
At the step where we are required to configure the measure catalog connection, the system is not determining the data source based on the measure I have selected. I have updated the BW master data post creation of the measure.
Is there any other activation which needs to be carried out before assigning the measure to the frame configuration ?
regards,
AnirudhaHi!
Got the solution! I had to enable the query for external access in the Extended Query properties. Post that the data source is being recognised in my SEM 3.5 managment cockpit.
regards,
Anirudha
Maybe you are looking for
-
Need clarification on using the NodeFunctions in mapping
Hi All, Can we use UseOneAsMany & Remove context functions in mapping of one field?? My requirement is, from Idoc one of the Header segment(E1ADRM1) will repeat 3 times with qualifier as "WE" "AG" & "AS". I have to mapp the NAME1 field of header s
-
How can I read JPEG attributes?
I am new to JAVA. I need some helps~~ How can I read the JPEG attributes? The attributes here I say are Title, Subject, Author, Keywords, Comments. All of these can be found in the summary of jpeg files by clicking properties of the files in windows
-
UCC 128 labels with barcodes - from SAP directly onto Zebra
Hi - I am trying to find a solution that would help our business print ucc 128 labels with barcodes directly from SAP onto Zebra printers. Till now, I had our basis team configure the printer and I ran a sample print program using SAPScript. The samp
-
Today I installed Robohelp 7 onto a test machine and converted our Word help file. Everything LOOKS like it should be going fine and dandy. Obviously that isn't the case, or I wouldn't be posting here. We generate two help files - a WinHelp 2000 and
-
Hi....SAP EXPORT statement
Hello All, Please provide ur valuable solutions for the following i am trying to call a report in background with Submitt Job FM ... To the called report i need to pass internal table so i am making use of "Export to shared Buffer " statement, this i