Management Console and R26

I upgraded my test environment JVM to R26, but now I can't get a connection
from the ManagementConsole to the JVM. I did a tcpdump - the tcp connection
opens but the Management Console refuses a connection. Here's the details
from the ManagementConsole.
Thanks!
java.rmi.ConnectException: Connection refused to host: 127.0.0.2; nested
exception is:
java.net.ConnectException: Connection refused
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:574)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:185)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:171)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:94)
at
javax.management.remote.rmi.RMIServerImpl_Stub.newClient(Ljava.lang.Object;)Ljavax.management.remote.rmi.RMIConnection;(Unknown
Source)
at
javax.management.remote.rmi.RMIConnector.getConnection(RMIConnector.java:2229)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:271)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:229)
at
com.jrockit.console.rjmx.RJMXConnection.setupServer(RJMXConnection.java:617)
at com.jrockit.console.rjmx.RJMXConnection.connect(RJMXConnection.java:175)
at
com.jrockit.console.rjmx.RJMXConnectorModel.connect(RJMXConnectorModel.java:387)
at
com.jrockit.console.browser.BrowserAbstractNode.connectNode(BrowserAbstractNode.java:102)

I take it you are running the JRockit you wish to monitor on a Linux system? On some network configurations (where the machine is not in DNS, or rather when it's host name does not correspond to the DNS name) you will have to set the system property java.rmi.server.hostname to the IP-address of the interface you will be communicating with.
Kind regards,
Marcus

Similar Messages

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

SAP Management Console and Services

Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
Corinne

Corinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan

Error HTTP Status 500 after installing DS Management Console and IPS Services on BI Enterprise Server

The following error
HTTP Status 500 - while trying to invoke the method java.util.Properties.entrySet() of an object loaded from local variable 'globalProperties'
occurred after installing DS Management Console and IPS Services on BI Enterprise Server
BI Enterprise Edition 4.1 SP1 and BODS 4.1 SP1

Hi,
If you can't see the login screen of the CMC then it's a problem of webapps and not EIM services.
Try cleaning the Tomcat cache for the BOE webapps and let Tomcat re cache it. Often it does the job.
- Stop Tomcat
- Rename the BOE folder to BOE-OLD in C:\Program Files (x86)\SAP BusinessObjects\tomcat\work\Catalina\localhost\
- Start Tomcat
When the Tomcat process in task manager is done working (it can take 10-20 min+) then try again.
When you're done, you can delete the BOE-OLD folder.
Let me know!

Solaris Management Console and root pasword

I upgraded to Solaris 10 last night and tried to perform some admin work to user accounts, using Solaris Management Console. When performing the task, Solaris wants to verify user and password, the root password fails. The root pasword is correct because it let me login as root. Solaris Management Console rejects all passwords for verification. Help me please.

Thanks for your help. I updated my root password from 4 charcters to 4charcters + 4 numerals , still SMC will not let me in. I updated 2 machines and both allow me to login as root (GUI) but SMC wants to confirm the password and will not let me in.
I have reinstalled (initialized rather than upgrade) Solaris 10 on one machine (Ultra60) , that machine now works fine. It allows me to login as root(GUI) ans the SMC accepts my root password
The machines are an Ultra10 and an Ultra60.
I choose to upgrade rather than a new install because of to much info to rebuild.
Brian

Solaris Management Console and X86 Disk

Greetings,
I am trying to use the Solaris Management Console to manage the 2 disks I have in my Intel PC. Both disk are allocated 100% to Solaris 10 and were formatted and partitioned by the installation program.
Why is it that when I use the Management Console it tells me that there is no Solaris FDISK partition and that I cannot manage the disk until I put a Solaris FDISK partition on them? It doesn't seem like the tool is all that useful if it cannot use the default format put on the disk by the install program.
On related note, why is it that auto layout during install creates partitions that are barely large enough to hold the OS? From what I can see it puts the bulk of the disk space into home for user home directories but this creates a problem when trying to install additional SW such as StarOffice.
Cheers
TC

Thanks for your help. I updated my root password from 4 charcters to 4charcters + 4 numerals , still SMC will not let me in. I updated 2 machines and both allow me to login as root (GUI) but SMC wants to confirm the password and will not let me in.
I have reinstalled (initialized rather than upgrade) Solaris 10 on one machine (Ultra60) , that machine now works fine. It allows me to login as root(GUI) ans the SMC accepts my root password
The machines are an Ultra10 and an Ultra60.
I choose to upgrade rather than a new install because of to much info to rebuild.
Brian

Exchange 2010 - Management Console and Shell Very slow

Heya
I have an Exchange 2010 SP3 enviroment, with 2 HUBCAs and 5 MBX servers.
This servers were 2008 R2 standard, and they were working fine.
This weekend, in order to configure DAG, i upgrade 3 of them to server 2008 R2 enterprise with dsim. Is not the first tiem i do this, and never had problems before.
After the upgrade, the server started fine, the mailboxes, the database.. everything fine.. except, de mmc and the shell.
Both, the mmc and the shell wont start. It gives me the winrm error, but because a time out.
I have installed the installed the iss-winrm feature, delete on regedit and %appdata% the "cache" for the management console, checked the firewal... and nothing worked.
Well, thats not true, in one of the servers, the Management console started working fine, but the shell, it connect, but every command i launch it takes like 10-15 minutes to execute (for example, a get-mailboxdatabase).
In the other,, no the Management console, no the shell connects, i get a winrm timeout.
I dont know were to continue cchecking why happens this, just started after changing the 2008 R2 from standard to enterprise
Thanks for the help!!

Hi,
Please check that your time is in sync as well on your Exchange Server.
Please check whether this issue caused by performance.
More details in the following article:
Understanding Memory Configurations and Exchange Performance
http://technet.microsoft.com/en-us/library/dd346700(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/dd346699(v=exchg.141).aspx
Please also paste the detailed error message without sensitive information for the further troubleshooting.
Found some related blog for your reference:
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support

Eterprise manager console and ssl

I have Oracle Application Server 10g infrastructure and midtier on the same machine. I want to secure enterprise manager console by "emctl secure em". Is there any way to use certificate from CA which i have used to secure httpd. "emctl secure em" generates its own certificates.
Marcin Starzec

OS, Db version?
Make sure you cancel your previous installs and no process hanging before new install.
What’s using port 5500? is it the previous install or some other application.
For EM Oracle tries to use port [1158, 5500, 5501, 5502] in that order
Looks like that’s your 2nd EM hence there is one on 1158.
Check, to see anything installed yet:
/opt/oracle/product/10.2.0/install/portlist.iniHope it helps.

Solaris Management Console and Split Backplane

I have installed a split backplane with single-loop configuration on a V890 server. I have setup the FC using the installation documentation. I have 12 disks attached and they are showing up 0-11 when I use the format command.
When I try to use the SMC, I get the following error;
'Attempt to get a list of all disks failed with unexpected error: null'
I cannot see the disks using 'Disks' or 'Expansion Storage' under the console.
I know there is a patch for the SMC 2.1, but in the patch description, there is no mention of this as being one of the fixes.
Until I get SMC to see the disks I cannot raid them.
Any and all assistance on this is greatly appreciated.
Thanks.

You may not get an answer here, as this forum is for "Sun Management Center": a different product. Curse Sun for recycling acronyms! :)
Still, if you have a v890 you should really be running Sun Management Center as well, at least to get all the good hardware monitoring bits out of it.
Regards,
[email protected]
http://www.HalcyonInc.com

DNSDHCP-Management-Console and clustered DHCP

Hi,
(following belongs to OES11SP2 & the with this version delivered
DNSDHCP-Console.)
I am running a DHCP-Service on two cluster nodes.
The subnet config is already done in the eDir from an old OES2SP3
DHCP-Server.
The service runs fine one the cluster nodes but die DHCP-Server icon at
the bottom of the console window has a red X.
I am not sure if I could belive that there are not errors.
If the server has no subnet assigned this icon show a server with an
red cross and an empty box. If the subnet is assigned the icon show a
server with an red cross and an @-Sign insteed the empty box.
What should I check? Any hints?
TiA
Bernd

Bernd,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Exchange 2010 Public Folders Cannot Change Permissions Errors from Management Console and Powershell

This problem does not affect new public folders, only old ones that have probably been on Exchange 2000/2003 servers in the past. Migrations I believe did go smoothly but now have errors.
Error Reported is:
Microsoft Exchange Error
The following error(s) occurred while saving changes:
Add-PublicFolderClientPermission
Failed
Error:
Failed to modify the MAPI.NET table property of the object "000000001A447390AA6611CD9BC800AA002FC45A030064004E9CC2F8DD46B5E1E4578DE6D8030000000278E90000" on server "FQDN.Server.Name". See inner exception for more information.
MapiExceptionNonCanonicalACL: Unable to modify table. (hr=0x80004005, ec=2409)
Diagnostic context:
    Lid: 40487   EMSMDBMT.EcDoRpcExt2 called [length=218]
    Lid: 56871   EMSMDBMT.EcDoRpcExt2 returned [ec=0x0][length=356][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropModifyACL [64]
    Lid: 17082   ROP Error: 0x969
    Lid: 27745
    Lid: 21921   StoreEc: 0x969
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropModifyACL [64]
    Lid: 22086
    Lid: 27128
    Lid: 27232   StoreEc: 0x8004010F
    Lid: 27128
    Lid: 27232   StoreEc: 0x8004010F
    Lid: 22086
    Lid: 21970   StoreEc: 0x8004010F PropTag: 0x3D210102
    Lid: 19149   Error: 0x0
    Lid: 24509   Error: 0x0
    Lid: 31229   Error: 0x0
    Lid: 21970   StoreEc: 0x8004010F PropTag: 0x668F0040
    Lid: 6671    StoreEc: 0x8004010F
    Lid: 24976
    Lid: 24952
    Lid: 25472
    Lid: 7972    StoreEc: 0x969
    Lid: 26532
    Lid: 4920    StoreEc: 0x969
    Lid: 5119    StoreEc: 0x969
    Lid: 5247    StoreEc: 0x969
    Lid: 17916   StoreEc: 0x969
    Lid: 4814    StoreEc: 0x969
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x969
    Lid: 29150
    Lid: 20446   StoreEc: 0x969
OK
From ExFolders we get error "Exception: Object Reference not set to an instance of an object"
Any thought on how to fix permissions, people who already had permission in the past can see and access them OK and all objects, but we cannot change/update or remove permissons
We alos receive similar error from the powershell.

Hi,
Could
you please add a new public folder hierarchies with ADSIEdit as following setups.
For how to use ADSIEdit ,you can access:
http://technet.microsoft.com/en-us/library/cc773354(WS.10).aspx
1.Run ADSIEdit, right click Exchange Administrative Group under “Configuration \ services \ Microsoft
Exchange \ Organization name \ Administrative groups”.
2.Select New Object.
3.Select msExchPublicFolderTreeContainer for the class and click Next.
4.Enter the following for the value:
Folder Hierarchies, click Next.
5.Click Finish.
6.Create
Public Folder Tree Object.
7.Right click CN=Folder Hierarchies -> New Object.
8.Selected msExchPFTree for the class.
9.For the value we entered, "Public Folders" and clicked next.
10.Clicked on the "More Attributes" button, selected msExchPFTreeType .
11.Set the value
to 1.
Note: This is very important that this value is set
to a value of 1 as This tells Exchange that this is a MAPI Tree.
12.Click Ok and then finish.
13.We then went
to the properties of the newly created "Public Folders" Tree object in
ADSIEdit.
14.Copy the distinguished name value
to the clipboard and then click cancel.
15.Navigate
to the Storage group that contains the Public
Folder Store for this server and get properties of the server.
16.Locate the msExchOwningPFTree attribute and paste in the value that was copied
from the Public folders Distinguish name attribute.
17.Restart the Information Store Service.
18.Mounted and dismount the PF store.
19.Open Outlook with administrator,give full permission to default owner.
Hope it can help you!

How to load a new version in Central Management Console

HI I am new to Central Management Console and need to replace a program there with the new version.
i am not seeing how this is done.
i have gone there and located the current report. but i don't see where you replace it.

Hope you have already got know on how to add new programs to CMC. (CMC->Folders->Manage->Add->Program file->Browse and select the program)
To replace...
If you are using SAP BO XI R3.x, you can use "Import wizard" or LCM for replacing \ overwriting the existing version of any objects (Programs, Crystal, webi reports etc..,) from one environment to another (Dev-QA, QA-UAT, UAT-Prod).
If you are using SAP BI 4.x, you can use Promotion Management which is integrated within the CMC to replace or overwrite the existing version of any objects from one environemnt to another.
To know more about using Import Wizard - http://scn.sap.com/docs/DOC-20523
To know more about LCM or Promotion Management - http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_LCM_User_en.pdf
Note: If you are using LCM in R3.x or Promotion Management in BI 4.x, you can also utilize the "Version management" to manage your versions to keep track off.

Enterprise Manager Console

Hello,
I'm reading documentation about Oracle10g, and I am a little bit confused. I have understood that it hasn't the Enterprise Manager Console and that the Administration task has to be executed from the OEM Grid Control (or OEM Database Control). But now, reading the "Advanced Replication 10g Release 2" (B14226-01) doc, in the 7th chapter it explains the Replication Management Tool in Oracle Enterprise Manager Console. So the question is: can I install the Enterprise Manager Console in the clients, if I have Oracle10g (10.2.0.1) in the server?
I would really appreciate any answer, because although I have tried using the Grid Control, I can't. I'm sorry but the Console GUI is much better for me.
Thanks in advance. Regards,
Aran

I take it you are looking for the old-style, java-based standalone EM Console. It is still around, but probably on it's way out.
You install it from the 10.2 Client media, which you can download from here.

Oracle Enterprise Manager Console redirection

I've recently moved one of our servers that has Oracle 10g 10.2.0.2.0 installed to another domain. After this was done, the Database Control to navigate to the web page will no longer work properly. I have tried uninstalling and reinstalling Enterprise Manager Console, and changing the default web address in the browser's title bar, but to no avail. Are there certain configuration parameters that need to be addressed in order to get this working again, or certain registry settings that need to be altered? Thanks for any help on this in advance.

Only a general advice is possible. This kind of error occurs,when there are mismatches in your installed Oracle software. In your case 'java.exe' and 'oci.dll' are not suited to each other. You may have to repeat the installation . Keep an eye on error messages.
Werner

Manage Mobile Device missing in Exchange Management Console

Exchange 2007 SP1.
So up until now, my organization did not support ActiveSync and we had it disabled for all users.
This summer this will change, and we will start allowing ActiveSync devices to connect.
As a pilot group I enabled 3 users. They all connected with their devices days ago (two on Monday, the other on Tuesday). When looking them up in the Exchange Management console, the Manage Mobile Devices option is not visible.
If they go into OWA, their devices and all management options are listed there.
I realize that I could go into ADSIedit and set msExchMobileMailboxFlags to 1 and then it would show up. That isn't really my concern though.
My concern is that when a user leaves the company, we would like to be able to go into EMC and issue a wipe of their device, not have to give ourselves permission to their mailbox, log in to their mailbox via OWA, and issue the wipe there.
Anybody know why this happens (why a user with a mobile device doesn't get the Manage Mobile Device option in EMC)?
Thank you

Hi
Here's a link for how to wipe a device remote
http://technet.microsoft.com/en-us/library/aa998614%28EXCHG.80%29.aspx
Hope it will be helpful for you!
Jonas Andersson MCTS: Microsoft Exchange Server 2010, Configuration | MCITP: EMA | MCSE/MCSA Blog: http://www.testlabs.se/blog
Thanks for the link, but I know how to perform a remote wipe.
My question would be why does the "Manage Mobile Devices" button not appear when highlight some users that do have Mobile Devices? Yes I could go into the OWA of their mailbox to wipe their device. Yes, I could use the Shell to wipe
their devices. But neither of these would be as convenient as just going into Manage Mobile Devices via Exchange Management Console and performing a wipe there. Especially for my user admins.
Right now I am basically looking at creating some script that goes in and makes sure that "msExchMobileMailboxFlags" is set to 1 for every user that has ActiveSync enabled. My main issue is that I feel I shouldn't have to do this. :P

Management Console and R26

Similar Messages

Maybe you are looking for