Management of UCS-E SDRAM cards
It would be nice to find some documentation on the UCS-E series SD ram card that is provided as a blank for host OS. In particular it would be nice if the CIMC could be used to manage this card in a future firmware update. Functions should include, format and make bootable.
Anyone have any documentation on this specific issue?
Thanks in advance.
Hi Wilson,
Cisco Have recently submitted an Expert Webcast: Cisco Unified Computing System (UCS) B series Upgrade & Troubleshooting
https://supportforums.cisco.com/event/12289671/expert-webcast-cisco-unified-computing-system-ucs-b-series-upgrade-troubleshooting
Let me know for any questions / concerns, much appreciated.
Thanks!
Tara
Similar Messages
-
Desktop Manager incorrectly says my media card is full
As you can see from the image below, Desktop Manager reports that my media card is full but this is incorrect - the card is empty but for the 3 photos I took earlier today. I am running iTunes 9.1, Desktop Manager 1.02 (build 8) and OS X 10.6.3.
Any suggestions on how to correct this?Hi there!
Here are some instructions for configuring your BB and Media Card to appear as USB drives within Windows:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
The only difference might be the version of DTM to use...5.0 is the current version.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
UCS Virtual Interface Card 1280 failover
Hi,
I'm facing some issues with failover and Cisco UCS Virtual Interface Card 1280.
I found some information regarding M81KR:
Cisco UCS M81KR has fabric failover
The Cisco UCS M81KR offers fabric failover, which enables interface failover at a physical level without involving the OS or hypervisor or certification overhead.
http://www.cisco.com/en/US/prod/collateral/ps10265/ps10276/solution_overview_c22-555987_ps10280_Product_Solution_Overview.html
b) Both uplinks of one FI fail or FI fails : In this case the corresponding server links will be shut since there is no uplink available on an FI. The FI will propagate link-down status to the adapter. Once adapter link-down status occurs, it is the responsibility of the operating system to re-pin traffic to the remaining NIC/HBA. The exception here is with Palo adapter (M71KR and M81KR) which supports fabric failover.
https://supportforums.cisco.com/docs/DOC-18525
But I didn't found about Cisco UCS Virtual Interface Card 1280.
Cisco UCS Virtual Interface Card 1280 is newer than M81KR, anybody knows if 1280 has the same feature? is it possible the failover even if the Fabric Interconnect fails?
Thanks,Hi Mauricio,
The VIC 1280 has fabric failover as well, from the spec sheet:
Network architecture
Provides a redundant path to the fabric interconnect using hardware-based fabric failover
http://www.cisco.com/en/US/prod/collateral/ps10277/ps11551/data_sheet_c78-677682.html -
Managing the UCS C220 M3S with the UCS Manager
I have 2 new Cisco UCS C220 M3S running 2.0(3b) and 2.0(1b) connected to a UCS-FI6248UP 5.2(3)N2(2.23d) via a Intel X520-DA2. I also have both management interfaces up via a 100 meg copper connections. My issue is that I can't see these servers in the UCS Manager the UCS-B was a no brainer but the C's are not discovered, I've looked through both the CIMC and the UCS Manager and I don't see an option to change the management to the UCS Manager. I'm sure that I'm missing something since this is my first experience with the UCS C or UCS as a whole. Thanks
Hi,
Please make sure that the Set up of the UCS C-Series Server Integration with UCSM is correct. Here is the guide when you will be Configuring Single-connect to the IO Module FEXs.
You can also review the link here : Managing Rack-Mount Server.
Let me know if it helps,
Abhishek -
Desktop Manager Won't Recognize Media Card Installed
I have installed a media card in my device. I have changed the default storage of new pictures to the card. I would like to move the other images from device memory to the media card, but Desktop Manager will not recognize the media card is installed. The media card does contain images, and I have successfully emailed attachments. How can I get Desktop Manager to recognize the media card?
Hi there!
Here are some instructions for configuring your BB and Media Card to appear as USB drives within Windows:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
The only difference might be the version of DTM to use...5.0 is the current version.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Management software for VIC [M81KR] card "Cisco VIC Ethernet Interface" - Win 2k8R2
Hi,
I am configuring a blade presently that has a VIC (M81KR) card installed.
In the UCS profile, I configured 4 vNICS
- 2 vNICS for Public (One on Fabric A, one on Fabric B)
- 2 vNICS for Private (One on Fabric A, one on Fabric B)
I have installed the OS (Win Server 2008 R2) and the Ethernet Drivers (Cisco Ethernet Driver).
What I want to be able to do is to bond/team the links together and tag VLAN traffic.
-- I've downloaded the Utility ISO from Cisco, however there is no management software for the VIC (That I can see). There is only software for:
+ Broadcomm, QLogic & Emulex..
Any assistance is appreciated!
Cheers, Chris.Just to add to Simon's comments, we rely on fabric failover rather than a teaming driver. This take the load off the host and puts it on the adaptor hardware.
The only other use case I've heard of for the teaming is in full width blades such as the B250 & B440, where customers may want to team across the two adaptors for great redudancy. As the MTBF for the adaptors is extremely high, this wasn't seen as a priority/concern. If you have another business or technical requirement that FF will not solve, please let me know so I can feed this back to our development team.
As for the VLAN driver, at present you need to configure unique NICs for each VLAN. I've pushed on this request for some time and I'm told it has been planned for a future release. I'll check to verify which release the Palo VLAN tagging driver (for windows) is tentatlively planned for and get back to you.
Regards,
Robert -
Raid management on UCS 210M2 with ESXI 4.1
Hi there,
I'm trying to figure out what is the best way to monitor the raid on an 210M2 with the megaraid card. Currently I have install ESXI 4.1 with a windows 7 worksation. On this workstation I have install the MSM but of course you can only see the raid of that workstation... What I've read on the LSI doc is that you need to install some kind of "drivers" on the esxi console to be able to monitor the whole raid... But with the limited options in the console shell of esxi, ( no rpm ), its impossible to install that driver ...
The question is how its possible to use MSM with ESXI 4.1 to monitor/manage the raid of the ucs210m2 ?
I've install the esxi 4.1 cisco iso
regardsHello,
Based on what I have read, we do not need to install anything on ESXi hosts. MSM works with ESXi through CIM provider.
Refer to section .6.5.4.1 in the LSI doc. Also, here is the KB article from LSI
http://kb.lsi.com/KnowledgebaseArticle16430.aspx
Make sure the requried network ports are open between the system running MSM and ESXi host.
HTH
Padma -
OEL6.1 in VM manager does not see network card
I installed OL6.1 as a guest machine in VM manager. I started the install process and when I got to the network configuration it would not let me click on "configure network", it was greyed out. I thought that was a little bit odd but I just thought that I would configure it later. Once I got to the desktop of OL6.1 i checked for the eth0 settings but there was no eth0 at all. The OL6.1 did not even know a network card existed, but I tried to add it manually and still it did not see anything and would not connect to the internet. Has anyone seen this problem before? Thanks.
I will try to answer to the best of my knowledge your questions but I am a bit new at this. I downloaded the OEL 6.1iso media from Oracle site, I then imported it into the resources section in VM manager 2.1.
I then used the create new Virtual Machine and selected the server pool.
I selected the ISO file with OEL 6.1.
I gave it a name, memory size, console password.
Below that I can see the Virtual Network Interface is selected and it shows Bridge xenbr0.
It is showing Fully Virtualized machine not paravirtualized mode. As far as I know I did not install in Xen HVM or with PV drivers.
That is about all I did. Then I started the machine and when through the install process but it did not see the virtual network device. -
Media manager won't recognise media card or contents
I'm getting frustrated here... the Blackberry used with the old Roxio PC software work fine. The laptop has been rebuilt, and the new BB Media manager does not want to recognise the photos I have stored on the Media card. I can upload them individually (there are around 300 of them) to Facebook or similar, I can bluetooth them individually to my Apple. But can not get them off or access them on mass. The Apple PC says "Unable to locate media card". The Windows PC says the media card is encrypted. I want these pics, what am I doing wrong?
I also remember when I had the first BB that I could access all the files as if the BB and media card were HDDs - now, despite loading the USB drivers that will not work.
Can anyone help please - apologies if this is a fixed problem already... I have searched the boards but nothing is coming up that answers the problem.
Thanks
AdamThese are files from an SD card camera so have no natural reel numbe
Well, if you use Log and Transfer then FCP will assign it one. I use L&T for P2 and for the footage from my Canon DSLR, and FCP assigns it the name of the folder that I offloaded the SD card onto. Which is why I give the folders unique names...tape names.
Maybe FCP won't recompress properly as you aren't using an editing codec to begin with. "I have some h264 .mp4 files that I want to recompress into motion jpeg files for offline editing on my Macbook Pro." H.264 isn't designed for editing, so it might not work right. First convert to ProRes 422, then media manage smaller.
Shane -
I am having some problems getting Fabric Manager 5.0(4d) to authenticate to UCS switches (6120XP's at code level 4.2(1)). We are using TACACS+ for the authentication and the UCS switches are configured within TACACS. In Fabric Manager we get the status message of "Unknown User or Password (Server,Client). Anyone run into this?
Hello,
you will need to setup snmp user/password on UCS 6120 with the same snmp user and password as the switches
setup snmp for UCS
1. UCS-A# scope monitoring
2. UCS-A/monitoring# enable snmp
3. UCS-A/monitoring# set snmp community public
4. UCS-A/monitoring# commit-buffer
5. UCS-A/monitoring# create snmp-user admin
6. UCS-A/monitoring/snmp-user# set aes-128 no
7. UCS-A/monitoring/snmp-user# set auth md5
8. UCS-A/monitoring/snmp-user# set password (same admin password as the
seed switch)
9. UCS-A/monitoring/snmp-user# commit-buffer
After setup snmp/password on UCS, click re-discover button on FM or better remove fabric and then re-discover fabric -
Out-of-band management using WAC-AM-1 card
HI
I am trying to configure cisco 2811 router which has WIC-AM-1 card installed. I want to connect and configure this router using PSTN line terminated onto router. I am looking for only remote management and not backup solutuon. Please help.
AmolThis is what we use. We have a ACS server that hands out our dialback number per user or if it can't contact the TACACS server it will use the local username/password. Works like a champ. It will give you a 192.168.51.x address you telnet to 192.168.51.1. We also have 2 octopus cable to reverse telent to other devices.
aaa group server tacacs+ TACACSServers
server 10.x.x.x !
aaa authentication login default local-case
aaa authentication login RemoteAdmin group TACACSServers local-case
aaa authentication enable default enable group TACACSServers
aaa authentication ppp RemoteAdmin group TACACSServers local
aaa authentication dot1x default group RadiusServers
aaa authorization config-commands
aaa authorization exec RemoteAdmin group TACACSServers local
aaa authorization commands 1 RemoteAdmin group TACACSServers local
aaa authorization commands 15 RemoteAdmin group TACACSServers local
aaa authorization network RemoteAdmin group TACACSServers local
aaa accounting exec default start-stop group TACACSServers
aaa accounting exec RemoteAdmin start-stop group TACACSServers
aaa accounting commands 1 default stop-only group TACACSServers
aaa accounting commands 1 RemoteAdmin stop-only group TACACSServers
aaa accounting commands 15 default stop-only group TACACSServers
aaa accounting commands 15 RemoteAdmin stop-only group TACACSServers
aaa accounting network default start-stop group tacacs+
aaa accounting network RemoteAdmin start-stop group TACACSServers
aaa accounting connection default start-stop group TACACSServers
aaa accounting connection RemoteAdmin start-stop group TACACSServers
aaa accounting system default start-stop group TACACSServers
ip dhcp excluded-address 192.168.51.1
ip dhcp pool RemoteAdmin
network 192.168.51.0 255.255.255.0
ip host CON1 2033 223.223.223.1
ip host CON2 2034 223.223.223.1
ip host CON3 2035 223.223.223.1
ip host CON4 2036 223.223.223.1
ip host CON5 2037 223.223.223.1
ip host CON6 2038 223.223.223.1
ip host CON7 2039 223.223.223.1
ip host CON8 2040 223.223.223.1
username mikedesk callback-dialstring 1xxxxxxxxxx password 7 blah
interface Loopback192
ip address 192.168.51.1 255.255.255.0
interface Loopback223
ip address 223.223.223.1 255.255.255.255
interface Async1
ip unnumbered Loopback192
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation ppp
dialer in-band
dialer callback-secure
dialer-group 1
async mode dedicated
peer default ip address dhcp-pool RemoteAdmin
ppp callback accept
ppp authentication chap callin RemoteAdmin
ppp authorization RemoteAdmin
ip tacacs source-interface FastEthernet0/0
ip radius source-interface FastEthernet0/0
dialer-list 1 protocol ip permit
tacacs-server host 10.x.x.x port 49 key xxx
tacacs-server directed-request
tacacs-server key xxx
line 1
exec-timeout 5 0
modem InOut
modem autoconfigure discovery
transport input telnet
transport output telnet
autoselect ppp
stopbits 1
speed 115200
flowcontrol hardware
line 33 48
transport input telnet
line aux 0
line vty 0 4
password xxx
authorization commands 1 RemoteAdmin
authorization commands 15 RemoteAdmin
authorization exec RemoteAdmin
accounting connection RemoteAdmin
accounting commands 1 RemoteAdmin
accounting commands 15 RemoteAdmin
accounting exec RemoteAdmin
logging synchronous
login authentication RemoteAdmin
transport input telnet
line vty 5 15
authorization commands 1 RemoteAdmin
authorization commands 15 RemoteAdmin
authorization exec RemoteAdmin
accounting connection RemoteAdmin
accounting commands 1 RemoteAdmin
accounting commands 15 RemoteAdmin
accounting exec RemoteAdmin
logging synchronous
login authentication RemoteAdmin
transport input telnet -
Is "client power management" understood by non-Cisco cards?
I would like to tailor the "power client" IOS command to instruct WiFi adapters to limit their max transmiting power.
Will this be understood by non-cisco cards? In other words: is this a standard 802.11 power management command?
I am a little bit confused, because the documentation says that in order to use this command, "Aironet extensions" must be enabled....What you are describing is often referred to as DTPC (Dynamic power control or Dynamic transmit power control). The following link shows the syntax for it. It only works with clients that support DTPC. This is a capability of clients that support CCX (v4 I believe). Most modern client adapters support CCX, as long as you are using their client software (such as ProSet for Intel). If you tell us what cards you have I can try to find if they support CCX and DTPC.
http://cio.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080606d4a.html#wp1034946
- Eric -
Roxio Media Manager Won't Recognize SD Card
I've followed some threads around here checking to see if I could fix this solution. I've reformatted my card several times, reinstalled BB Desktop Manager, along with almost everything else. My device shows up in the "My Devices" tab but it will not display my card. Any ideas?
Guam
BB desktop mgr v4.6 and 4.7 were released relatively close and I would first recommend first to uninstall v4.6 and go ahead and install v4.7....
Also, just as a note, the largest portion of the BB desktop mgr install and operation is the Media Mgr, due to the use of different drivers and operations in your cpu, so it will take a few minutes to run in some cases....
Try restarting your CPU to make sure no glitches are present on the computers operating system -
If after these two steps you are having a problem loading just the Media Mgr portion of the desktop software, then you may have a driver conflict occuring thru windows not allowing the proper load of this program... just a thought...
Let me know how it goes!
If I successfully help you with an issue, thank you for clicking "kudos" in my post.
If your issue has been solved, please resolve this thread by marking the post which solved it for you! -
Managing multiple family member gift cards on our 1 family itunes account
My family has one Itunes account with sharing across all our Macs, phones, pods and pads. Is there a way to separate my kids gift cards in the account so they each can only spend their card $ and still allow content to be shared across all family members...and of course prevent them from spending at will against my credit card on the account ???
jndcarey wrote:
My family has one Itunes account with sharing across all our Macs, phones, pods and pads.
This is the problem.
Create an iTunes account for each individual.
Your kids will thank you later when they move out and want to take all the iTunes purchases which were purchased on your single account.
Is there a way to separate my kids gift cards in the account so they each can only spend their card $
No.
However, you can authorize each computer for everyone's iTunes account and everything will be shared. -
I have recently upgraded to Firefox 4, and I must say that I love it (:
Although, I want to try out Mozilla's Web O'(pen) Wonder, but it gives me this message :
Unfortunately, while your browser supports WebGL, your video drivers may be too old. To view any of the demos tagged with WebGL, try updating your drivers at NVIDIA, AMD, and Intel.
You can still watch screencasts of the WebGL demos or fully experience our other non-WebGL demos without updating
The problem is that my Device Manager says that my video card is the latest available.
What do I do now?11 people have this problem now. What video cards supports WebGL?
Maybe you are looking for
-
Hi, After my monthly subscription on April 16, I can't make call with it to my country. When i try to make call I will be told to subscribe. Please, help me out. Thanks.
-
Greetings. I am currently writing my major project for computer science. I am just here to ask one question. I called a method from within paint which made my program spit the dummy. The method was supposed to draw a question on the screen but instea
-
I need to add personnel area, personnel sub area, emp group and sub group field in 'Selection fields from infoset' section in SQ01/02 adhoc query so that user can execute query for these fields as a selection. How to do it.
-
Ever since upgrading to CS6, when I click Levels>Load preset, I can no longer search in the window for the file. Previously, I could type in the file name and it would come up and I would select it. Now, when I search for the file name, there are no
-
Error(1013011) Invalid Command 10099 Received in Request Manager
This error message appears both in the server and the app log files. It 'freezes' Essbase ( we can no longer communicate with Essbase and any other cube ). The only thing to do is to 'kill' the ESSSVR process (Unix). We are running the 6.1 patch3a ve