Management Pack Templates - Unix/Linux Service template error
Hello,
When I try to run this template I get the following error.
The Page [Microsoft.SystemCenter.CrossPlatform.UI.Authoring.ServiceTemplate.ServiceStateProbePage] in the assembly [Microsoft.SystemCenter.CrossPlatform.UI.Authoring] could not be loaded. Please make sure that hte account you are running under has
sufficient privileges to load the given assembly, or the management pack that defines this page is installed or hte assembly containing the page is in hte path of the executable or that the page derives from known Operations Manager page type.
I tried this from my Computer and the Management server with the same result. My account is in the Ops Admin role and I have no issues creating any of the other templates.
Any help would be appreciated.
Thank you
Walter
Just I case anyone else runs across this.
The Online Catalogue UNIX/Linux MPs are only for SCOM 2007 R2. With SCOM 2012 and above we went with Management Pack Bundles [MPBs] and the Online Catalogue does not support them. To get the latest MPs and agents for UNIX/Linux on SCOM 2012 you need to go
to the Microsoft Download Center and search for "System Center 2012 Monitoring Pack for UNIX and Linux Operating Systems". The current release is UR2 which can be found here -->
http://www.microsoft.com/en-us/download/details.aspx?id=29696
This release includes the following:
4/9/2013 - Update release - version 7.4.4119.0 - includes agents with version: 1.4.1-270
The Microsoft.Unix.Service.Library.mp is installed by default with SP1 and we don't expect it to be uninstalled. The Update Releases [UR] only contain MP/Bs that have changed so Rob is correct in that the only place you will find this MP is with the SCOM
2012 SP1 RTM release.
Regards,
-Steve
Similar Messages
-
Credentials to management pack templates - Service monitoring
Hello,
I'm trying to see the list of services in a server to use the "management pack templates" in scom 2012 r2, but i'm getting the following error.
My action account don't have the necessary permitions to enter in the server. Where can i change the credentials to be used in this operation?
Thank you,
RuiFrom my experience in monitoring Windows Service, we should provide a service name and it is a easy way if we can select a service in another computer from slect windows service dialog box. In reality, our user account has no privileges in opening Service
Control Manager on target computer. My workaround solution is asked user to provide the service name. User can dump the service name by double click the service in services console.
Roger -
Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801 -
SCOM 2007R2 unix/linux service monitor setup - cannot discover service under /etc/init.d
Can you give a few more details on what you have tried, and what didn't work for you? Were you stepping through the wizard to monitor a Linux/UNIX service and something went wrong? Or did you successfully create the service monitor in the wizard, but it
didn't trigger if the monitored process terminated?
Michael Kelley, Lead Program Manager, Open Source Technology Center -
Operations Manager 2012 R2 Unix/Linux agents installation
Hi!
I want to monitor some Linux (RH6) servers with Operations manager 2012 R2. I successfully imported necessary management packs… and then I’m lost. I cannot discover Linux clients
from console. And I can’t find good guidance how to deploy and manage Linux clients. Can anyone direct me to any step-by-step guidance?
And, do I need certificates on SCOM and on Linux clients?
Thanks,
UVTo discover and monitor linux client, you can refer to below link
http://technet.microsoft.com/en-us/library/hh230722.aspx
For Importing Management of linux (RH6), you will need to download management of linux from below link
http://www.microsoft.com/en-us/download/details.aspx?id=29696
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer". -
Are we missing any Management Packs for newly installed services/applications
Hello!
Would it be possible to get a report or alarm when new server roles, services, applications etc. are installed on the monitored Windows Servers in SCOM 2012 SP1, but there are no Management Packs installed to monitor the new services?
For example on a newly provisioned Windows Server, the customer installs SQL 2008, but we don’t have the SQL 2008 SCOM Management Pack. How can we get a notification that we have a new Service installed there but no MP to monitor it.
Best Regards,
Mario Patov
Mario PatovHi,
Based on my knowledge, it’s a little difficult.
I recommend you use SCOM to monitor a txt which create by sc query command.
For more information, please review the link below:
Sc query
http://technet.microsoft.com/en-US/library/dd228922.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SCOM 2012 SP1 - Trying to import Unix / Linux Management packs - need help
Hello all, I am using SCOM 2012 SP1. I am trying to install the following management packs for Unix/Linux:
http://www.microsoft.com/en-us/download/details.aspx?id=29696
When I try to do so, it says that I'm missing some dependent management packs. Two main ones it looks like:
Microsoft.SystemCenter.WSManagement.Library - Version 7.1.10000.0
Microsoft.SystemCenter.OperationsManager.Library - Version 7.1.10000.0
However, I cannot figure out where to get these two other management packs from. I've been googling for an hour now and I'm starting to go in loops. Can anyone give me any suggestions on how to get this updated version of these two management
packs listed above please?For Microsoft.SystemCenter.WSManagement.Library , you can check below link
http://www.microsoft.com/en-us/download/details.aspx?id=29266
For Microsoft.SystemCenter.OperationsManager.Library, it's already deployed with SCOM installation
http://technet.microsoft.com/en-us/library/hh212701.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical
That link for WS Management looks like its the "Microsoft.SystemCenter.OutofBand.SMASH.Library" management pack. It does not appear to be "Microsoft.SystemCenter.WSManagement.Library"
Also, about the "Microsoft.SystemCenter.OperationsManager.Library" one, I do have a version of that in my SCOM already. It appears to be version 7.0.9538.0 though. Apparently theres a version 7.1.10000.0 out there somewhere, based on what I saw
in the messages above when attempting to import the Unix/Linux MPs. I don't know how to update this management pack. I tried searching the catalog for "Microsoft System Center Operations Manager Library" but that didn't find any results.
So I still do not have either of the versions I need of either management packs. -
UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error
We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.
-
Installation of Application Management Pack 3 Failed
Hi All,
Please help me.
I've experienced an error while installing the Application Management Pack 3 on Linux Machine (OS: Oracle Enterprise Linux 5.3 32-bit) with EM Grid Control 10g Release 5. I want to install the Grid Control Plug-in Oracle E-Business Suite Management Pack 3 to manage our EBS Oracle Apps R12, but it was failed due to error. Below was the logs for error:
Log: /u01/app/oraInventory/logs/installActions2010-07-06_03-00-11PM.log
RepManager was not able to run successfully.
/applications/em/em/WEB-INF/lib/myjar.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emCfg.jar:/u01/a
pp/oracle/OracleHomes/oms10g/jlib/ojmisc.jar:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emUpgrade.jar
:/u01/app/oracle/OracleHomes/oms10g/sysman/jlib/emagentSDK.jar oracle.apps.oms_extn.util.EBSOUIUtil RepMa
nager /u01/app/oracle/OracleHomes/oms10g ${s_encrreposDBAPwd} (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOC
OL=TCP)(HOST=oem.kccmalls.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.com)))
/u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST
=(ADDRESS=(PROTOCOL=TCP)(HOST=oem.kccmalls.com)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.co
m))) -sys_password **** -repos_user sysman -repos_password ******** -action upgrade -verbose
RepManager was not able to run successfully.
Please see /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/appsemca-2010-7-6_15-558.out for more details.
Execution of the plugin was aborted
INFO: Configuration assistant "APPS plugin Repository Upgrade Assistant" was canceled.
INFO: The "/u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands" script contains all c
ommands that failed, were skipped or were cancelled. This file may be used to run these configuration ass
istants outside of OUI. Note that you may have to update this script with passwords (if any) before execu
ting the same.
INFO: Created a new file /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/config
ToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/configToolFailedCommands.
bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry
the configuration assistants at this time. Not successfully running any "Recommended" assistants means yo
ur system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failu
res.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Log: /u01/app/oracle/OracleHomes/oms10g/cfgtoollogs/appsemca-2010-7-6_15-558.out
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Environment :
ORACLE HOME = /u01/app/oracle/OracleHomes/oms10g
REPOSITORY HOME = /u01/app/oracle/OracleHomes/oms10g
SQLPLUS = /u01/app/oracle/OracleHomes/oms10g/bin/sqlplus
SQL SCRIPT ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/sql
EXPORT = /u01/app/oracle/OracleHomes/oms10g/bin/exp
IMPORT = /u01/app/oracle/OracleHomes/oms10g/bin/imp
LOADJAVA = /u01/app/oracle/OracleHomes/oms10g/bin/loadjava
JAR FILE ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/lib
JOB TYPES ROOT = /u01/app/oracle/OracleHomes/oms10g/sysman/admin/emdrep/bin
Arguments :
Connect String = (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oem.kccmalls.com)(PORT=152
1)))(CONNECT_DATA=(SERVICE_NAME=emrep.kccmalls.com)))
Action = upgrade
Repos User = SYSMAN
Default tablespace = MGMT_TABLESPACE
Default Data file = mgmt.dbf
Dflt Dfile Init size = 20m
Dflt Dfile Ext size = 20m
ECM tablespace = MGMT_ECM_DEPOT_TS
ECM Data file = mgmt_ecm_depot1.dbf
ECM Dfile Init size = 100m
ECM Dfile Ext size = 100m
ECM CSA tablespace = MGMT_TABLESPACE
ECM CSA Data file = mgmt_ecm_csa1.dbf
ECM CSA Dfile Init size = 100m
ECM CSA Dfile Ext size = 100m
TEMP tablespace = TEMP
Create options = 3
Verbose output = 1
Output File = /u01/app/oracle/OracleHomes/oms10g/sysman/log/emrepmgr.log.10108
Repos creation mode = CENTRAL
MyOracleSupport user name = NOTAVAILABLE_
MyOracleSupport URL = http://updates.oracle.com
Export Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Import Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Path Separator = :
Checking SYS Credentials ... rem error switch
ECM CSA Dfile Init size = 100m
ECM CSA Dfile Ext size = 100m
TEMP tablespace = TEMP
Create options = 3
Verbose output = 1
Output File = /u01/app/oracle/OracleHomes/oms10g/sysman/log/emrepmgr.log.10108
Repos creation mode = CENTRAL
MyOracleSupport user name = NOTAVAILABLE_
MyOracleSupport URL = http://updates.oracle.com
Export Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Import Directory = /u01/app/oracle/OracleHomes/oms10g/sysman/log
Path Separator = :
Checking SYS Credentials ... rem error switch
Return code = 0.OK.
rem error switch
Upgrading the repository..
Checking for Repos User ... Return code = 0.Exists.
Verifying Audit Master Table --> Passed
Verifying Time Coefficient Table --> Didn't Pass
Verifying SYSMAN Referential Integrity --> Passed
Verifying SYSMAN Trigger Check --> Passed
Verifying Max Enabled Roles --> Passed
Verifying Global User Context --> Passed
Verifying Exempt Access Policy --> Passed
Verifying SYSMAN Queue Tables Check --> Passed
Verifying VPD Basic Policy Function --> Passed
Verifying VPD Valid Policy Function --> Passed
------------- SANITY VIOLATION ----------------
Verification has not passed for schema upgrade
to ensure basic sanity conditions of the SYSMAN schema.
There are the following violations:
Schema Sanity Violation: Time Coefficient Table is expected 1 row but contains 0 row
Please contact Oracle Support for schema validations
before attempting to perform schema upgrade
Any help much appreciated.
Regards,
CyrusTake a look at: APPS Plugin Repository Upgrade fails with "Schema Sanity Violation: Time Coefficient Table is expected 1 row but contains 0 row" [ID 883703.1]
on support.oracle.com
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome%28page=KBHome&id=%28%29%29,%28page=KBNavigator&id=%28bmDocTitle=APPS%20Plugin%20Repository%20Upgrade%20fails%20with%20%22Schema%20Sanity%20Violation:%20Time%20Coefficient%20Table%20is%20expected%201%20row%20but%20contains%200%20row%22&bmDocDsrc=KB&bmDocType=PROBLEM&bmDocID=883703.1&viewingMode=1143&from=BOOKMARK%29%29
Regards
Rob
http://oemgc.wordpress.com -
Hi,
I exported SCSM default ServiceManager.RunbookActivity.Configuration Sealed management pack and remove it from SCSM. Later when I tried to import back the xml file it shows me this error.
Is there anyway to reinstate the original Sealed management pack?
Thanks
Jeron@Microsoft TechnetThis error message is often related to missing the tag ManagementPublicKeyToken within the category tag. If you seal a MP but without defined the token then Service Manager will complain like this. And obviously the token and key must match.
What happens if you insert your keytoken value into the MP, seal it with your own key and then import it?
Somewhat like below:
<Categories>
<Category>
<ManagementPackVersion>xxx</ManagementPackVersion>
<ManagementPublicKeyToken>tokenhere</ManagementPublicKeyToken>
</Category>
http://codebeaver.blogspot.dk/ -
The Management Pack Import Failed - Upgrading to R2 and SCVMM 2012
Just finished applying UR4 to my Service Manager 2012 R2 environment. One of the final steps has you copy these MPs from your Virtual Machine Manager server to the Service Manager box.
Microsoft.SystemCenter.VirtualMachineManager.PRO.Library (3.2.7510.0)
Microsoft.SystemCenter.VirtualMachineManager.PRO.V2.Library (3.2.7510.0)
Microsoft.SystemCenter.VirtualMachineManager.Pro.2008.Library (3.2.7510.0)
Microsoft.SystemCenter.VirtualMachineManager.Library (3.2.7510.0)
Microsoft.SystemCenter.VirtualMachineManager.2012.Discovery (3.2.7510.0)
I was able to import three of them, two failed with errors that appear to say specific MPs were not found. Do I need to import these additional MPs into Service Manager? This is one of the errors.
The management pack import failed.
Errors (8):
Could not load management pack [ID=Microsoft.SystemCenter.DataWarehouse.Library, KeyToken=31bf3856ad364e35, Version=7.0.8427.0]. The management pack was not found in the store.
: An error occurred while loading management pack c183c241-e7b5-a06f-d6d9-2d573485b91e from the database
Could not load management pack [ID=Microsoft.Windows.InternetInformationServices.2008, KeyToken=31bf3856ad364e35, Version=6.0.6539.0]. The management pack was not found in the store.
: An error occurred while loading management pack 1784bf83-89c5-68e5-2220-44d2c1715753 from the database
Could not load management pack [ID=Microsoft.Windows.InternetInformationServices.CommonLibrary, KeyToken=31bf3856ad364e35, Version=6.0.5000.0]. The management pack was not found in the store.
: An error occurred while loading management pack b739b9de-7c04-f1b9-fc56-4a118a6316ec from the database
Could not load management pack [ID=Microsoft.SQLServer.Library, KeyToken=31bf3856ad364e35, Version=6.0.5000.0]. The management pack was not found in the store.
: An error occurred while loading management pack bcd6dccf-c46c-a1f5-3c8d-bb4e99e2a6a3 from the database
Could not load management pack [ID=Microsoft.Windows.InternetInformationServices.2003, KeyToken=31bf3856ad364e35, Version=6.0.5000.0]. The management pack was not found in the store.
: An error occurred while loading management pack 7a920be5-d53c-fa2d-07a8-b415265e95b0 from the database
Could not load management pack [ID=System.Virtualization.Library, KeyToken=31bf3856ad364e35, Version=7.0.8430.0]. The management pack was not found in the store.
: An error occurred while loading management pack 474758fc-8648-c776-09f5-4033ee51efee from the database
Could not load management pack [ID=System.NetworkManagement.Library, KeyToken=31bf3856ad364e35, Version=7.0.8560.0]. The management pack was not found in the store.
: An error occurred while loading management pack dc6f8cbc-d89c-00bd-58eb-49a6d98d42b2 from the database
Could not load management pack [ID=Microsoft.SystemCenter.VirtualMachineManager.Library, KeyToken=31bf3856ad364e35, Version=3.2.7672.0]. The management pack was not found in the store.
: An error occurred while loading management pack 30113716-8134-9c58-5203-358d89357d74 from the database
Orange County District AttorneyHi,
Those prerequisite management packs should be imported manually.
Here is a similar thread for your reference:
How to import VMM2012 Discovery Management Pack into System Center Service Manager
https://social.technet.microsoft.com/Forums/systemcenter/en-US/2d505f89-f7d5-4e3f-bd22-0ba80451e04d/how-to-import-vmm2012-discovery-management-pack-into-system-center-service-manager?forum=systemcenterservicemanager
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
The selected management pack cannot be deleted.
I'm having problems deleting a custom management pack in SCOM 2012. The error is the following:
The selected management pack cannot be deleted. This might be because it is currently being deleted or it has already been deleted. If you think this message is in error, try again later.
Any ideas?I face the same problem in SCOM 2012 SP1
The selected management pack cannot be deleted. This might be because it is currently being deleted or it has already been deleted. If you think this message is in error, try again later.
I only have the problem with one unsealed MP.
I can delete other sealed MPs and import them again. So I hope my environment with DB is working well.
I also have deleted all overrides for this pack (in the same MP/xml because it is unsealed), restarted the DB-Server and the SCOM Management Server and also started the SCOM console with switch "/clearcache". All without success
Any idea how I can remove this MP from my SCOM environment.
Remark:
I tried the idea from AndreasZuckerhut
http://social.technet.microsoft.com/Forums/systemcenter/en-US/166c3560-c3ae-4510-8e25-1b6f1b57e3bc/unable-to-delete-mp-in-scom-2012?forum=operationsmanagermgmtpacks
created an own MP with the same ID but a newer version and started the "Import Management Pack" from the SCOM -Management GUI.
This time I got the Import-error called "The transaction log for database 'OperationsManager' is full due to 'ACTIVE_TRANSACTION'. I also see the same eventlog entry 9002 on the SQL-Server System. Could this be also an hint to
the upper problem of an failed deletion of an MP? A guide how to solve this is on
http://www.codeproject.com/Articles/380879/About-transaction-log-and-its-truncation-in-SQL-Se . But I not tried it yet whether it solves the problem. I will ask an SQL expert first and will note the result here later. -
Exchange 2010 Management Pack Data Warehouse Synchronization Fails
Hi Everyone!
Has anyone had success with importing the Exchange 2010 management pack into Service Manager 2012?
When we try to import it, it fails.
Upon further investigation, the 'System Center Core Monitoring' management pack (which is not included with Service Manager 2012) is a dependency of the Exchange 2010 management pack but
after we import it from the OpsMgr 2012 media, we still get the following warning when we import the Exchange 2010 management into Service Manager 2012...
"The management pack was imported successfully.
Warnings (1):
Override verification failed, cannot find Management Pack Element : : Cannot find ManagementPackElement [Type=ManagementPackRule, ID=Microsoft.SystemCenter.Agent.MonitoringHost.PrivateBytesThreshold] in management pack ManagementPack:[Name=Microsoft.SystemCenter.2007,
KeyToken=31bf3856ad364e35, Version=6.0.6246.0]."
...and, the Exchange 2010 management pack status in the Service Manager 2012 Data Warehouse 'Management Pack' view indicates 'failed' after the MPSyncJob completes.
We have a few 'Business Services' which depend on the Exchange 2010 management pack that we are trying to synchronize from OpsMgr 2012 and we are stuck until we can get the Exchange 2010 management
successfully imported into Service Manager 2012 and have it show a status of 'Completed' the Service Manager 2012 Data Warehouse 'Management Pack' view.
Nothing useful in the
Service Manager 2012 Data Warehouse and Management servers events logs that we could see.
Any help or guidance would be GREATLY appreciated!
Regards,
JJUpdate: I Just tested with CU2 installed for SrvMgr 2012 and OpsMgr 2012 and version 14.3.38.2 of the Exchange 2010 management, but the management pack still fails to deploy to the SrvMgr 2012 data warehouse (the management pack status shows
up as 'failed' and the MPSyncJob shows the management pack as 'pending association'). The only clue I have for this problem is the folllowing warning which occurs when I import the management pack into SrvMgr 2012...
I also get the following 33519 Event ID warning in the Operations Manager event log on the data warehouse server...
~~~~~
Management pack association ignored. This does not require any action. If you continue to frequently see this warning, contact your administrator. This process will continue to retry.
Management pack ID: e2296ed5-ddbc-ebc7-3881-c5288adaa7cf
Management pack name: Microsoft.Exchange.2010
Management pack version: 14.3.38.2
Data source name: SRV
Message: Either the MP has failed deployment Or any of its references has failed deployment
~~~~~
Has anyone had success with getting the Exchange 2010 management pack imported and successfully deployed to the SrvMgr 2012 data warehouse?
The good news is that even though the Exchange 2010 management pack has a status of failed, the distributed applications in OpsMgr 2012 that depend on the Exchange management pack now show up under Configuration Items/Business Services including
all related service component objects which was what I was trying to accomplish in the first place, so for now I'll just leave the Exchange 2010 management pack in the data warehouse with a failed status.
Regards,
JJ -
How to change management pack in incident template in scsm
We have created customized incident management pack and import that to scsm.Created templates using the this managementpack now i got request to edit or delete some Class properties in the customized managment pack.I have exported the management pack and
trying to edit the Class properties but those are Grey out.
Please let me know that how can i Edit or Delete the Class Properties in Customized management pack.
And Also let me know that i have created Templates using Customized management pack if i delete that mp and import a new mp in to SCSM how can i update the template with new mp.I tied to chnage the management pack in template but it is greyout.
Regards, H@riIn which management pack are your class extension stored? Is this a sealed management pack (did you seal the management pack)? If it is a sealed MP than you have to modify the unsealed MP and seal it again with the same key.
If you export a sealed MP from SCSM it will be an unsealed copy of the MP but it doesn't work to modify this exported MP. So this is not an option.
If you want to delete custom properties in a MP you have to make sure that these properties aren't in use in the templates or work items.
Andreas Baumgarten | H&D International Group -
Event 22400 in Management Server member of Unix/Linux pool
Hi Guys,
I'm receiving the following alert in one of my management server member of Unix/Linux pool:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Date and Time: 5/14/2014 9:40:10 AM
Log Name: Operations Manager
Source: Health Service Modules
Event Number: 22400
Level: 1
Logging Computer: MYSERVER.MYDOMAIN.LOCAL
User: N/A
Description:
Failed to run the PowerShell script due to exception below, this workflow will be unloaded. System.NullReferenceException: Object reference not set to an instance of an object. at System.Management.Automation.PSSnapInReader.ReadEnginePSSnapIns() at System.Management.Automation.Runspaces.InitialSessionState.CreateDefault()
at Microsoft.EnterpriseManagement.Common.PowerShell.RunspaceConfigurationContainer.GetRunspaceConfiguration(InitialSessionStateEntryCollection`1 variableEntries) at Microsoft.EnterpriseManagement.Common.PowerShell.RunspaceController.Initialize(RunspaceConfigurationContainer
configuration, InitialSessionStateEntryCollection`1 variableEntries) at Microsoft.EnterpriseManagement.Common.PowerShell.RunspaceManager.DeliverRunspaceThreadProc(Object appDomainObject) Script Name: CopyDownloadedKits.ps1 One or more workflows were affected
by this. Workflow name: Microsoft.Linux.UniversalD.1.CopyAgentKits.Rule Instance name: MYSERVER.MYDOMAIN.LOCAL Instance ID: {44F4A4F4-4EE3-19F1-E876-15017******} Management group: MG-SCOM
Event Data:
< DataItem type =" System.XmlData " time =" 2014-05-14T09:40:10.0777054+02:00 " sourceHealthServiceId =" 44F4A4F4-4EE3-19F1-E876-15017****** " >
< EventData >
< Data > MG-SCOM </ Data >
< Data > Microsoft.Linux.UniversalD.1.CopyAgentKits.Rule </ Data >
< Data > MYSERVER.MYDOMAIN.LOCAL </ Data >
< Data > {44F4A4F4-4EE3-19F1-E876-15017******} </ Data >
< Data > CopyDownloadedKits.ps1 </ Data >
< Data > 300 </ Data >
< Data > System.NullReferenceException: Object reference not set to an instance of an object. at System.Management.Automation.PSSnapInReader.ReadEnginePSSnapIns() at System.Management.Automation.Runspaces.InitialSessionState.CreateDefault() at
Microsoft.EnterpriseManagement.Common.PowerShell.RunspaceConfigurationContainer.GetRunspaceConfiguration(InitialSessionStateEntryCollection`1 variableEntries) at Microsoft.EnterpriseManagement.Common.PowerShell.RunspaceController.Initialize(RunspaceConfigurationContainer
configuration, InitialSessionStateEntryCollection`1 variableEntries) at Microsoft.EnterpriseManagement.Common.PowerShell.RunspaceManager.DeliverRunspaceThreadProc(Object appDomainObject) </ Data >
< Data />
</ EventData >
</ DataItem >
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I couldn't find any information about CopyDownloadedKits.ps1, any help would be really appreciated.
Thanks in advance,Hi,
What is your operational manager version? Did you add the action account the local admin group of linux and unix?
I would like to suggest you get the newest management pack for linux and unix.
In addition, here is a thread with the same error, hope it can be helpful:
"PowerShell Script failed to run” alert in OpsMgr 2012
http://blog.tyang.org/2013/03/04/powershell-script-failed-to-run-alert-in-opsmgr-2012/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li
Maybe you are looking for
-
Hi Experts, In our production system, messages are frequently going to 'scheduled for outbound processing" state. After the manual retry the messages are going through. We are planning to setup RSQIWKEX, RSARFCEX and RSXMB_RESTART_MESSAGES for automa
-
I am trying to shop for accessories for my cell phone. But vitually every click brings me to the "Account Owner Features" page and then from there back to MyVerizon home page. I CAN NOT SHOP. I tried everything I could think of to get to a page where
-
I have a Bellsouth Router that is distributing a range of addresses via DHCP on a DSL connection to a network in a preschool with an the Airport Extreme connected to the router right next to it. In the room with the Airport Extreme is three Macs conn
-
was someone able to play DAoC on archlinux becouse i can't on Fedora or Ubuntu it ran quite well and i hope to get that on arch to this is the message i get in the terminal # wine: Unhandled page fault on read access to 0x0000000c at address 0x599e36
-
Accessory is not optimized for this iphone
I have iphone 4 and for almost a year I have used a Sylvania docking station to charge my phone at night and to also play my music through the speakers on it then all of the sudden I got the message "This accessory is not optimized for this iphone"