Management Packs deactivated but no security to use it ?

Hello All
I am using Em11g with the latest patches . I have deactivated all Management Packs including Tuning and Diagnostic ..
Whe i go to the database i cant use the performance website . No Link .... thats ok ...
But when i klick on segement adisor (11g database) it works and the tuning and diagnostic pack are reactivated in the management packs list .
possible ?
thanks
Edited by: PerYcut on 01.03.2012 04:40
Edited by: PerYcut on 01.03.2012 04:43

You have a Radio Shack Mini DisplayPort to HDMI Adapter or a Radio Shack HDMI-HDMI cable? Both, I'll assume.
You should have the Mini DisplayPort to HDMI Adapter plugged into the Thunderbolt port on your MBP. Then the HDMI-HDMI cable plugs into that adapter and into an available HDMI input on the TV, and the TV should have that input source selected.
Does that sound like the way you have things set up?
HDMI cables should all have similar function. Some users have reported problems with some brands of Mini DisplayPort to HDMI Adapter.

Similar Messages

HP Management Pack - why would a rule be used for a network card error?

Hi,
I am asking this question with regard to the HP proliant management pack but my question is about the more general "rule" v "monitor" question which generally I understand (I think).
We get alerts for HP network card failures. This is rule based and basically looks for event "2" in the event logs. The same thing happens though if a cable gets pulled or a switch fails for a few seconds for instance.
The question I am getting asked by admins is to override this as its a "false alarm". I have pointed out people shouldnt just pull a network cable (maintenance mode please!) and if switches are failing then use the SCOM alert to let the network
team know... Plus if the card genuinly does fail this is the alert. BUT they are asking why isnt this a monitor anyway? If the network card is OK I think event 4 gets logged. So why didnt HP write it as a monitor that would close when it sees the success event?
My main thinking was if they had you wouldnt get to know about intermitant faults that dont last long. For instance the card would be down for 30 seconds but the monitor would close as soon as it was back up and you wouldnt see it.
Any thoughts?
thanks

My guess is because they have tools that compete with MSFT and do not sell their MP's. So now they have to have one of their own FTE's creating a management pack for a competing product to monitor their hardware. If it worked better than HP Openview,
then maybe more people would switch to Openview and dump SCOM...
Honestly it comes down to resources, and the fact, similar to MSFT management packs, they are FREE, so how can you justify spending all the time and resources to create something and then give it away for free? You can't, so you speed through it, and
drop it to the public, let them find the issues, and stress test it, etc. (not a fact, just my honest opinion after working with this product for over 13 years). MSFT is guilty of this as well, they have had their fair share of problem management
packs...but they are FREE.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Execute powershell command (new-object -comObject ...) in management pack

Hello everyone
I have a COM Object that want to use it in my management pack. When I write the powershell command "new-object -comObject ... " to create it outside of MP and in a ps1 file it works without any error. However when I write it in my MP, this
error is showed in event viewer: "Retrieving the COM class factory for component with CLSID {clsID} failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))."
I have to mention that when I use vb script in my MP and using "CreateObject()", I don't have any problem.
How can I use "new-object -comObject ... " in my management pack?
thank you all
Alireza

Hi Marthijn,
Actually I don't have any problem with powershell in my management packs. For example I can use "MOM.ScriptAPI"
to create $oBag and return it to next module. My problem is only with that custom COM object. Interesting thing is that, it
works fine when I create it in powershell file outside of MP, but when I create it in my MP, that error occures.
thank you so much
Alireza

Windows 2008 R2 DHCP management pack

i got the windows 2008 R2 DHCP management pack installed but one of my dhcp server is 2008. Will this mp monitor 2008 DHCp server?
one of my dhcp cluster went down and service was stopped but there was no alert .
what is the problem?

Different between true and false option of “Alert only if startup type is automatic " when DHCP service is stopped
DHCP service start up type
“Alert only if startup type is automatic "
automatic
not automatic
Yes
Generate Alert
No Alert
No
Generate Alert
Generate Alert
Roger

Sealed and unsealed management pack in scom ?

Dear all ,
What is Difference between sealed and unsealed management pack in scom?
I know like override alert can not be saved in sealed MP , is there any thing else ?
Sengo.

Hi,
A sealed management pack is a binary file that cannot be edited. An unsealed management pack is an XML file that can be edited. Sealed management packs should have an .mp extension, while unsealed management packs should have an .xml extension.
In general, management packs obtained from an application or hardware device vendor are sealed.
Although you cannot change the settings in a sealed management pack, you can still customize the applied settings of a management pack after it is imported by using overrides or by creating additional settings such as rules, monitors, and tasks that supersede
the management pack's default settings. All customizations that you create are saved to a separate management pack file.
Management packs can only reference another management pack if the management pack that is referenced is sealed
Regards,
Yan Li
Regards, Yan Li

How do i change my security questions because I tried changing them through manage account password but to get in i need the security question answers :|

I did as people said to go the apple iD manage account and password and security and to get in i have to answer the security questions but i dont know what they are please help because im trying to purchases something on this computer as it is my first use i need the security question answers

Ok, so I had the same problem. What you should do is, call the
Apple Technical Support number: (44) 0844 209 0611
And ask for the Account Security Team. This worked for me.

Query used by SQL Server Management Pack for monitoring database backups

I use SCOM 2012 R2 and the SQL Server Management Pack to monitor SQL Server database backups. I believe I am getting false positives. SCOM reports database are not backuped, while in fact they are. So I need to troubleshoot this. I suspect SCOM is querying
the backup history in the msdb database. I want to know which query SCOM uses.
I have tried looking in the monitor's definition but I suspect the query is embedded in the management pack files which are binary. I have also tried running a trace using the SQL Server Profiler on my test environment and overriding the interval to 60 seconds,
but I don't see a relevant query being executed. I also don't see the alert reappear so I suspect SCOM does not honor the interval in a way I would expect.
What query, or other method, does SCOM use to check database backups?
Thanks in advance.

Thank you both Ivan and Michael,
I only saw your messages by email and didn't see your screen shot before I extracted the query myself. In my own queries I calculate the backup age in hours instead of days because of daily full backups. Perhaps It will be a good idea to create my own monitors
from scratch like I used to do with Nagios.
I will study the vbscripts and might create my own version which allows the query to be entered as an parameter and move all code to a .Net class which can be called from vbscript as an COM object. This way I hope to reduce the vbscript code to an minimum
while keeping the flexibility of the SCOM Operations Console and the robustness of .Net. I suspect I want to make more non standard monitors in the future.
Regards,
Arjen

"one or more management packs which are ready to install present a security risk are you sure you want to continue"

Hello
I am installing the following MP (for Windows Client OS)
http://www.microsoft.com/en-gb/download/confirmation.aspx?id=15700
Into a new SCOM 2012 R2 environment
When I go to import the MPs, I receive the following warning
"one or more management packs which are ready to install present a security risk are you sure you want to continue"
Is this normal?
why am I getting this message?
Should I continue to install any way?
Thanks All
AAnotherUser__
AAnotherUser__

It's normal. You will receive a prompt indicating that the management pack presents a security risk. This is due to the management pack’s use of agent proxying. Click
Yes to allow the import.
That's happened in Exchange management pack or SQL Management pack to can monitor all virtual hosts.
Yes, you should continue to install Management pack.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

I tried to find the reset security questions button on manage apple id but couldn't find it. Please help me reset my security questions?

I tried to find the reset security questions button on manage apple id but couldn't find it. Please help me reset my security questions?

The reset link, as described in steps 1 to 5 on this page, will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you don't have one then go to (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Wifi problems. I am using my ipad connected to a secure server. I keep having connection problems. My ipad shows I am connected, but I can't use the internet at all. I keep getting a not connected message. Help

I am using my ipad on a secure network. I have problems staying connected. It shows I'm connected with full bars but I can't use the internet. I turn the wireless off, reset the network and turned off the ipad, but this problem keeps happening. (Its been going on about 2 weeks) Any ideas?

Sayingyou went through all the steps of fixing provides us with little information see we do not know what step you tried.
- Have you reset your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powered off and then back on your router?
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections-
- Configuring your router to use no encryption as a test. If OK, the try a simple password.

I want to access my favorite site but your security alerts will not let me-how do I get your security to allow me to use my own computer as I want!!!

eggcave.com is being blocked for my use due to badware-I trust this site and have clicked the appropriate button but the security is still blocking me.Turn this damn thing off NOW before my virtual eggs die as I ca't care for them-or tell me were and how to do it and I will. The site has already dealt with the advertiser that caused the alert!

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I am trying to use a site that i have to do homework on but my security settings keep blobking some applet in needs to run for it to work.

I am trying to use a site that i have to do homework on but my security settings keep blocking some applet in needs to run for it to work. I have tried to make exceptions in the security settings but it has not worked.

There are other things that need your attention.
Your System Details List shows multiple Flash plugins.
* Shockwave Flash 14.0 r0
*Shockwave Flash 11.6 r602
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\

My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.
I set paper type
set quality
no color adjustment
set my profile
Teri

I go onto manage account to change the security questions because I've forgotten them but to get onto the security section i need to answer security questions. What do I do???

I go onto manage account to change the security questions because I've forgotten them but to get onto the security section i need to answer security questions. What do I do???

Ok, so I had the same problem. What you should do is, call the
Apple Technical Support number: (44) 0844 209 0611
And ask for the Account Security Team. This worked for me.

How can i use azure cmdlets in scom management pack scripts

i want to show some of azure web site metrics in the scom console so i have script which gets the data from azure portal
how can i use that script in the scom management pack
[void][system.reflection.Assembly]::LoadFrom(“C:\Program Files (x86)\Microsoft SDKs\Azure\PowerShell\ServiceManagement\Azure\Automation\Microsoft.WindowsAzure.Common.dll”)
$value=Get-AzureWebsiteMetric -Name "openemrmysql" -MetricNames "Http2xx" -TimeGrain "PT1M"
$API = New-Object -ComObject "MOM.ScriptAPI"
$PropertyBag = $API.CreatePropertyBag()
$result=$value.Data.Values
foreach($result in $value)
$global:totalvalue=$result.value.Total -as [int]
$PropertyBag.AddValue("AzureActive","AzureActive")
$PropertyBag.AddValue("Active", $global:value)
$PropertyBag
i have included this script in the management pack and it is not creating any counter in the scom console.
Can any one help me,
thanks & Regards,
Suresh Gaddam

Hi,
I would like to suggest you check articles below to get more information about PowerShell Scripts in a Management Pack:
http://blogs.technet.com/b/brianwren/archive/2008/02/20/running-powershell-scripts-from-a-management-pack.aspx
http://blogs.technet.com/b/brianwren/archive/2009/06/04/powershell-scripts-in-a-management-pack-part-2.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Management Packs deactivated but no security to use it ?

Similar Messages

Maybe you are looking for