Management Plug-ins

Using OEM Grid 10.2.0.3 setup page, I am trying to deploy Management Plug-ins, ibm_db2_database version 3.1.1.0.0 to an management agent locared on the AIX server; and microsoft_sqlserver_database version 3.2.3.1.0 to the Widnows 2003 SP2 Server. I have set the preference for both server and agent on those servers but I the same error on both; "Internal error occurred while undeploying the Management Plug-in entry(ies) of type ECM_UNDEPLOY. Make sure that this Management Plug-in is valid. Consult the OMS log file(s) for more details."
Is there anyway I can install/setup plugin directly to the server without deploying through the OEM Grid setup page?

I had to add the Windows server's IP to the /etc/hosts file on the OEM server.
That fixed the issue.

Similar Messages

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Solution Manager Plug-ins

Hi All,
How do I find out what Solution Manager Plug-ins I would need in order to connect to and monitor an R/3 4.6 system?
Jim

Hi,
as pre-requisites:
refer to below notes:
Note 116095 - Solution Tools Plug-In (TCC Basis Tools and Trace Tools)
Note 455356 - Requirements for System Monitoring in Solution Manager
For setting up the infrastructure for configuring the monitoring, refer to the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/02/411841a66af223e10000000a155106/frameset.htm ->configureing monitoring architechture.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID0126103650DB01284153907683519238End?blog=/pub/wlg/3544%3Fpage%3Dlast%26x-maxdepth%3D0
Thanks,
Jagan

How to manage plug-ins in Mail

At some point, I have installed an application (Antidote) which help to correct a french text. When I start my computer I have a message from Mail saying "Incompatible Plug-in disabled, Antidote - PJ". Mail won't start until I click on OK to acknowledge the message. I don't know how to manage the plug-ins in Mail (or any application).
I tried to completely remove the Antidote application but I still have the same message when I restart or start my computer. I have installed Yosemite but that didn't make a diference. Any suggestions? Thanks.

Hi BAL-iP,
Welcome to the Apple Support Communities!
I know plugins can be frustrating. If you are looking for the location of these Mail plugins, please review the attached article.
OS X: Third-party plugins for Mail may no longer work after updating OS X
Cheers,
Joe

Enterprise Manager Plug-ins vs. Connectors

Hi,
I'm trying to get more information on Enterprise Manager Connectors - what they are and how they differ from plug-ins. The Oracle Enterprise Manager 10g Grid Control Extensions Exchange home page makes several references to 'Connectors' but I can't find any reference to them in the extension guide or anywhere else. Is there any documentation on this?
Thanks,
Jon Freshman

Check more docs here:
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

SQL Server Management Plug-ins deploy error

Hi,
I have a GC 10.2.0.3.0.
I am trying to deploy the MS SQL server plug-in and am getting the following errors.
I have followed the instruction in this document: http://download.oracle.com/docs/cd/B16240_01/doc/apirefs.102/e12776/pisqp.htm
This thread did not help me much, Re: microsoft plug in deployment errors on grid control
At least one error has occurred. Refer to the Deployment Status page for more details.
The Deployment Status page shows ....
Deployment Errors and Warnings
Name microsoft_sqlserver_database Agent tenhrmdb201:3872
Version 3.3.3.1.0
An error occurred while communicating with the agent. It may be down or unreachable.
I have created a local user on the windows box(Agent) and given all the required permissions according to the document.
In the GC for the Agent Preferred Credentials, i have given the Host UserName = SERVER\username and the password.
Please help me find what am i missing here.

I had to add the Windows server's IP to the /etc/hosts file on the OEM server.
That fixed the issue.

How to check Exadata plug-ins are installed and running?

Hi ,
I have quarter rack Exadata set-up. I wanted to check whether i have Exadata plug-ins already installed and running or not ?
Is there any way to confirm this ? I can see grid control running on separate host and several other production dbs are registers with it for monitoring. But not sure whether Exadata db is registered to it or not ? I believe, i need to install agent and additional plug-ins to have it monitored via grid control.
Can i check that ? Is there any way ?
I am new to OEM and yet have not explored it.

I haven't worked with Exadata myself but the installed plug-ins should be visible under Setup (upper-right-corner of the Grid Control Home page), Management Plug-ins.
Eric

Agent restart results in loss of management plug-in deployment

A hardware provider provided us 3 management plug-ins for the Grid Control Enterprise Manager (V11g).
The Plug-ins are deployed on one single agent. The agent is located on our OMS. Overall, we've got 20 instances of these plug-ins on the same agent.
Now, we've detected that restarting this agent causes that the deployment of one plug-in has been lost. The effect is that the plug-in instances are not working anymore. They are still existing but without no function (like zombie processes).
We help ourselves with the following workaround:
Deleting all pug-in instances, re-deploy the plug-ins to the agent, recreate all 20 plug-in instances.
This workaround costs a lot of time and is not acceptable in the long run. Fortunately, I was able to write a script for an automatic deletion and creation of the plug-in instances on the agent.

Plug-in deployment results in files installed in the repository to handle the new target type and files laid down on the agent to handle the new target type. Restarting the agent shouldn't be able to remove any of these artifacts.
Can you confirm after the agent is restarted that the plug-in files still remain on the agent? (sysman/admin/metadata/<target_type>.xml is the main one) Are there errors in the agent logs?
How are the target instances discovered? Are they the same ones each time with the same instance properties?

How do I update plug-ins?

I received an InDesign CS5.5 file and it says I can't open it because I need plug-ins or latest version, but I have 5.5 (installed about two years ago, version 7.5) and it looks like all my Extension Manager plug-ins are checked. I can't find anywhere in Preferences to do auto plug-in updates. Help. I'm on a MacBook.

How do you know it's a CS5.5 file?
It's most likely a file from a newer version of InDesign, InDesign Cs6 or InDesign CC.
Go back to your source and ask them for a IDML file using File>Save As and also a PDF so that you can check text issues, like reflowing of text etc.

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

PLUG-INS not always loading - - Coupon Printer Manager plugin has crashed

''dupe of https://support.mozilla.org/en-US/questions/914197''
I am running Windows XP SP3 and all updates are current.
For weeks, running 7.0.1, 8.0.1 or 9.0.1, whenever I try to print coupons at the www.coupons.com website, I have difficulty and consistently I receive the following Firefox ERROR message...
"The Coupons Inc. Coupon Printer Manager plugin has crashed"
...and I always SUBMIT a REPORT to Mozilla.
This website is suppose to invoke the following plug-ins...
Coupons Inc., Coupon Printer Manager 4.0.1.3
Coupons Inc., Coupon Printer Manager 4.0.0.7
...and using Task Manager I watch to see if the Image column shows one or two plug-ins appear - of course, I don't know which ones - see below for additional info. Most of the time only one plug-in appears and then the website asks me to INSTALL the software (again). When two plug-ins appear (again, I do not know which), things run okay for the first coupon - however around 50% of the time I am unable to print a second, third, etc, coupon.
Regarding add-ons, I have the following:
PLUG-INS
Coupons Inc., Coupon Printer Manager 4.0.1.3
Coupons Inc., Coupon Printer Manager 4.0.0.7
Java Deployment Toolkit 6.0.300.12 6.0.300.12
Java Platform SE 6 U30 6.0.300.12
QuickTime Plug-in 7.7 7.7.0.0
Shockwave Flash 11.1.102.55
EXTENSIONS
Adblock Plus 2.0.3
Free Download Manager plugin 1.5.5
APPEARANCE
FOXSCAPE 4.01
Default 9.0.1 (disabled)
I have disabled each of these add-ons to see if anything improves, but nothing does. This does not surprise me since I have been running the same ADD-ONS for months and this problem has only started happening over the past few weeks.
I have uninstalled the Coupon Printer plug-ins, scrubbed my Registry, and then reinstalled them (with FF closed, as well as opened, of course), and that does not help either.
Sure would like to RESOLVE this FF problem.
I am wondering if there's a PLUGINS setting that needs tweaking, and on that note, I have tried setting...
dom.ipc.plugins.java.enabled
...to TRUE (where default is false) and that does not help either.
The following screen shot shows my about:config / plugin details > http://tinypic.com/r/10dv3v7/5
Hopefully, others have experienced the same problem and found a workaround or fix.
Thanks,
CurlySue :o)

Sorry, a resolution isn't going to easily or come from Mozilla.
4 out of 5 of those crashes were directly caused by the Coupons, Inc. Coupon Printer DLL = npMozCouponPrinter.dll
The developer of that plugin is going to have to fix it. Contact the Coupon website to find out how to report a bug with that plugin.
https://crash-stats.mozilla.com/report/index/b7c6e33f-d12b-481f-aca0-546b12120111 
https://crash-stats.mozilla.com/report/index/c4077e92-719a-453b-b046-e4b802120217 
https://crash-stats.mozilla.com/report/index/51be502e-6bfb-4c31-8738-1f5302120217 
https://crash-stats.mozilla.com/report/index/9cb6ff8d-0acc-4490-bfa8-c48bf2120217
This report doesn't specifically indite that plugin, but points to a general plugin fault. 
https://crash-stats.mozilla.com/report/index/a855f8e7-964c-49b8-a049-54aba2120217

I am unable to access my email. I can sign in with my password, then a message comes up that says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All plug-ins listed are enabled. What am I missing?

I am unable to access my email from Charter.net. I can sign in with my password, then a message comes up which says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All of my plug-ins are enabled. What am I missing?

After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

How do I fix 'lost' plug-ins in the AU Manager?

I am running Logic 8 and I have had no problems until I noticed today that many, about 30, plug-ins seem to be missing. They are still loaded on my computer and ProTools sees all of them but Logic does not, even in the AU Manager, which used to see them.
Amplitube, T-Racks, Blue Cat, among others are now gone. I noticed this is Toast as well.
What can I do please!? I am in dire need now.

I have run disc check. Since I have Logic 8 I did not use 64 bit mode. I do not think that is an option in this version but if I am wrong I have not altered any of those settings.
PT sees the plug-ins in its own format of RTAS and VST - I have a convertor, but Logic is not seeing it in its format of AU.
I have only found 1 Component folder and it is nearly empty now! I have no idea how this is so.

AU Manager Crashes, Standard 3rd party plug-ins not working

I recently had a huge crash, down to the point where I eventually replaced my system drive with a brand new one, and started fresh.
After rebuilding my entire world, plug-ins that used to work, don't anymore - and they're standards that everyone uses (Kontakt 2.1, etc). I can't even get the AU Manager to load.....Logic just sits there forever with "the beach ball of death" untill I force quit.
Nothing "new" has been introduced. I've simply replicated the system I had before down to the T.
Any thougts?
I'm on 7.1.1 in 10.4.4
G5 2x2, LAP 7.1.1, 10.4.2, 4.5 gigs

Try removing all 3rd party plugins and see if Logic works by itself.
Add the plugins back to the components folder one by one, testing to see if they behave.
Sorry to hear about your crash, I have had this happen to me and it was a week of pain.
It really made me wish all plug ins were authorized on dongles, so that something like carbon copy cloner would have saved the day.

Extension Manager removing the whole Plug-ins folder along with the panel

When I click "Remove" from the Extension Manager interface, the following has occurred--
In CS6 - When I used the Extension Manager to "remove" by clicking the "remove" button, it removes not just the panel I installed but has removed the folders "Plug-ins>Panels>my panel". The whole hierarchy!
In CS5 - it has left the Plug-ins folder but removed "Panels>my panel"
In CS4 - the Extension Manager is working correctly for installing and removing without removing any shell folders.
Question #1 - What do I do about my missing plug-ins for these applications? This is disastrous!
Question #2 - Is there a way to fix the CS5 and CS6 Extension Manager to not delete the shell folders, when you are just trying to remove a custom panel????
My system:
Windows Vista Ultimate
Service Pack 2
Processor Intel Core 2 Quad CPU Q9650 @3.00GHz
Memory (RAM) 8.00GB
System-64-bit
Hard Drives C: 1Terabyte - 301GB available
Z: 1 Terabyte - 309GB available

Also here is more info that might be germane--
I am using Extend Script Toolkit CS6 3.8.0.12 ExtendSript 2.12 ScriptUI 6.1.8 to edit and generate 1 .mxi file for use in CS5 & CS6 and another .mxi file for use in CS4.
I open the Adobe Extension Manager for CS5 to create the .mxp files for CS5 & CS6
I double click on the .mxp file and it automatically opens Adobe Extension Manager CS6 and installs the panel into Photoshop CS6
I manually open Adobe Extension Manager CS5 it is sluggish to open and shows a progress bar. Then I do a File>Open to install the panel into Photoshop CS5.
In the testing of various iterations of mypanel, I have removed the previous version of mypanel, so there is nothing showing as enabled or installed in the EM. So, are you kind of saying that if I hadn't emptied out the panel but had left my own panels in there as just disabled, rather than "removed" that the rest of the whole Plug-ins folder would still be there. Leaving something in there would have been like saving an empty seat for a friend at the theater?
The Versions of Adobe Extension Manager that I am using are:
CS6 version 6.0.2.40
CS5 version 5.0.334
CS4 Version 2.1.112 (which appears to be working as it should!)

Management Plug-ins

Similar Messages

Maybe you are looking for