Management Point 0Bytes and Critical

Hi All
Using System Center 2012 R2 and have deployed the Management Point role to two different Windows Server 2012 R2 servers. Now within the SCCM Console under Site Status my Management Point role shows as Critical and the Total Size shows 0 Bytes - when I go
to Show Messages and select a time before the role was installed, no error messages appear.
No errors appear for any components under Component Status.
Not sure where I can go from here
Thanks

Have you checked the actual MP log files (http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_MPLog ) MPControl.log specifically?
How about sitecomp.log since it is what is responsible for doing component availability and disk space checks?
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Installing CU1 - Management Point Critical

I have an issue which I have verified on a clean install, when I install the CU1 update on the Primary Server the Management Point changes to critical status, and under Total Bytes it changes to 0 bytes.
I have a CAS and a Single Primary server. Any ideas why this happens, from what I can see the Management Point appears to be functional, but the status is just stuck in critical.

Nothing as far as I can tell, which is why I am stumped. I have just tested this on another installation and it does the exact same thing!!!!!!
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK
SMS_MP_CONTROL_MANAGER 27/08/2012 7:22:41 PM
2212 (0x08A4)
Sent summary record of SMS Management Point on ["Display=\\PRIME.blah.net.au\"]MSWNET:["SMS_SITE=QLD"]\\PRIME.blah.net.au\ to \\PRIME.blah.NET.AU\SMS_QLD\inboxes\SiteStat.Box\a1msrn15.SUM, Availability 0, 41939964 KB total disk space , 39233860 KB free disk
space, installation state 0. SMS_MP_CONTROL_MANAGER
27/08/2012 7:22:41 PM 2212 (0x08A4)
Http test request succeeded. SMS_MP_CONTROL_MANAGER
27/08/2012 7:22:41 PM 2212 (0x08A4)
STATMSG: ID=5460 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_MP_CONTROL_MANAGER" SYS=PRIME.blah.net.au SITE=QLD PID=1640 TID=2212 GMTDATE=Mon Aug 27 09:22:41.853 2012 ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_MP_CONTROL_MANAGER 27/08/2012 7:22:41 PM
2212 (0x08A4)
Successfully performed Management Point availability check against local computer.
SMS_MP_CONTROL_MANAGER 27/08/2012 7:22:41 PM
2212 (0x08A4)

How to assign clients to alternate management point

Hi Guys
Does anyone know how to reassign clients to another management point on the same site.
We have 3 seperate locations connected by a vpn, our main site has a primary site server with the management point role and the other 2 locations are just distribution and management point servers.
I have built another distribution /management point server as the primary server site location as i want to take some of the roles of the primary site server as its overloaded, all my clients at this site are already assigned to the primary site server management
point but want to assign them to the new distibution/management point at the same site.
Was going to uninstall the management point role of the primary site server so that just my new server would have this role at this location, if i do this will the cleints automatically assign themself to the only available management point at this site
or will they break.

The clients always request a list of available MPs. If you deinstall a MP it will not be on that list anymore, so the clients will automatically go to another available MP.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Internet based management of SCCM clients and management points ?

We have an SCCM backend infrastructure which is used to manage what is in affect multiple external organizations over the internet. Currently each SCCM client is managed by the primary server directly over the internet.
Am I right that we could place a configmgr management point on the internal networks and for the clients to talk to this server when connected to the company network instead of all clients getting patched across the internet connection ? Meaning that
just the MP would communicate with our backend infrastructure ?

So your internal clients are now connecting over the internet to the local MP? How does this setup look like exactly? How were the clients installed (parameters)?
Torsten Meringer | http://www.mssccmfaq.de

Uninstall and Reinstall Secondary Site Management Point Role

Dear Brothers,
I have an issue with one of my SCCM 2012 Sp1 with CU3 Secondary Site Server which the client failed to install on the actual server due to a client issue observed in the CCMSetup.log.
Observation Regarding the issue:
Issue Detail No1.
SCCM Client is not installing to my Secondary Site Server with site code (XYZ), after all the site server are also clients in SCCM hierarchy so it self needs SCCM Client as well.
CCMSetup.log:
"Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint" when you try to install the client agent in Configuration Manager"
According to http://support.microsoft.com/kb/2905359
the solution is to :
1. Uninstall the management point role.
2. Reinstall the client agent on the management point computer.
3. Reinstall the management point role.
Issue Detail No 2.
When I am trying to uninstall the Management Point Role via SCCM Console as part of the solution posted on the above KB Article, unfortunately the delete or uninstall option is been greyed out.
Now a lot of discussion on the topic "Can not remove management point role is greyed out "under this thread
http://social.technet.microsoft.com/Forums/en-US/1a039893-4a65-4dc9-9feb-e6f09ea1fc0b/can-not-remove-management-point-remove-role-is-greyd-out?forum=configmanagerdeployment
However on the last comment of the above thread from"Trana010"
stated a tool or a command
C:\program files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:(sec server name) SMSMP
0
Which I never tried yet, and also cannot find a reliable KB supporting the command "rolesetup.exe".
Questions:
1. What is the best way to uninstall/Reinstall the management point on secondary site considering the above issue details?
2. Should I installed CU4 directly instead? Maybe it will resolved the issue even though it is not related to the current case
Regards,

Well, it's by design that you can't remove a management point on a secondary site, so I can imagine that that's why there is nothing "official" written on that subject. I think there are three things you can do:
Try to run the command line (which is probably unsupported)
Submit a CSS call
Upgrade to CU4 and assume the problem is gone.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Dear Peter,
I end up shooting a case with CSS, he guided me and share that this issue is very common.
The reason is that it requires CU3 upgrade (Configmgr2012ac-sp1-kb2882125-x64.msp) to be installed with the SCCM Client installation (The same time) via command line in an elevated permission.
Follow the solution provided by Microsoft Support:
CCMSetup.exe /forceinstall SMSSITECODE=XYZ CCMENABLELOGGING=TRUE CCMLOGLEVEL=0 PATCH=C:\Configmgr2012ac-sp1-kb2882125-x64.msp
It seems the Client Push provided by SCCM 2012 Sp1 Infra, that includes your Hotfix under the "Hotfix" folder under the client source folder somehow doesn't work with this issue, that's why the work around is to help the ccmsetup to grab the Hotfix with
by providing the path for the hotfix instead of relying to take the hotfix for the hotfix folder.
Overall peter thanks for your suggestion. And also to Mr. Jason Sandys opening the option for an R2 upgrade, I will look into the KB for this to plan for implementation.
Regards,

Management point and Distribution point behind netscaler for virtual ip/dns name

Is it supported to place a server behind a netscaler for using a virtual IP/DNS name?
We are looking into placing our distribution points and management points behind the netscaler to provide firewall functionality.
We would point our clients to a different DNS name for each individual MP and DP to provide routing through the netscaler.
As far as I know this is only possible using IBCM.
Please let me know if this is possible without IBCM internally.

Using a different DNS name is problematic as there is no way to specify an alternate fqdn for a site system on the intranet. Clients use the actual fqdn of the system hosting the role; this is given out by the MP directly to the client based upon the site
system's actual name.
You could manipulate name resolution in a variety ways so ultimately the actual IP used wouldn't matter, but that's useless unless the client is using the proper name.
If you you could use the same name and IP, then it should work no problem as long as the traffic is properly delivered to the site system. Ultimately, nearly all client agent to site system traffic is nothing more than WebDAV via IIS on the site system so
just basic web traffic.
Jason | http://blog.configmgrftw.com | @jasonsandys

Incident management and Critical Master data table change management.

Dears,
I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
I want to know how many days should be required for this activity and please share documents.
Shivam

Hi,
I faced a similar situation,
I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
Also ran RSRV check which was showing no negative results.
I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
I ask you to wait till the next process chian run, and try all possible ways to activate.
If it is not corrected then raise an oss to SAP.
Thanks & Regards,
Vishnu

SCCM - Branch Distribution point and Management point on the same server

Hi All,
Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
Rgs,

Hi,
Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
prerequisites needed.
Can you elaborate on which roles you are considering installing?
Steven Hodson | http://www.stevenhodson.com | @_hodders

Degradation of status and reduction in gained points..very critical issue..

Dear all,
Due to EBS upgradation at our organization, I was unable to open the OTN since last 2-3 months.
I had PRO status having points more than 600 at that time.
Suddenly, today I have opened OTN and surprisely I found that my status is degraded to JOURNEYER from PRO and points reduced to 425 .
Earlier it was 625-630 points .
How it is possible ?
What I have to do to regain my losted status & points ?
regards
sanjay

Dude wrote:
jgarry wrote:
We are all entitled to our opinions. That gives Blue the right, and you the right to disagree. Yes, but there is a difference between expressing an opinion or criticizing and belittling the need of others. For instance, "smoking is unhealthy" vs. "smoking is bad and we don't want you here". OK, how about "you are a nasty guru and we don't want you here." (Not you, but you can probably guess who I mean. And I have pointed out to complainers that he has lots of points, so that must mean something about how helpful others think of him. That's an odd feeling for me.)
>
.... And not having a point system and arbitrary levels is more egalitarian. I don't see where a point system has anything to do with egalitarianism. Are you making this up? Can you explain what you mean please? I cannot see why egalitarian was something one would want to achieve in any environment other than religion or law, it's absolutely counterproductive and sets no intensives of creativeness and progression.If you have a point system, you have a hierarchy. You've been around long enough to have seen some of the best discussions here and on usenet were without a point system. Heck, anyone can ask Jonathan Lewis an optimizer question. That's a good thing! That's truly egalitarian. And I'm sure you could find examples of someone getting "correct" points followed by Jonathan giving a better answer. That's silly on its face, a lopsided hierarchy (of course, Jonathan said he doesn't care about the ace director label, or something along those lines, when his profile hadn't been updated to show it).
>
Many of us believe that the problem is it motivates people to provide less than useful content. If that is the only reason some people are here, it is indeed wrong. I don't have this impression, but even it was factual, it's up to the original poster to assign points and not to the person who responds or who is first in the game. People who have such intention will get frustrated very soon - and probably want the point system to be removed and replaced by a post counter ;-)lol, well, we know that is moot for now. Thanks again to Sonya for keeping us updated.

Changing the Resident Management Point on SCCM

Hello All,
All my clients have stopped downloading software packages even though they recieve the advertisements. Everything else works in SCCM but that one critical part. It was all working fine before. After snooping around I find that clients have the correct Assigned Management Point but their Resident Managment Point is the old SMS2003 server. I am not sure how that happened. I am assuming this is the cause for the packages not downloading. How would I go about changing Resident Management Point to the correct one?

Hi,
Check the clientlocation.log for detailed information about the MP used by clients. Make sure you have boundaries and a MP assigned to the clients. If you have removed a server then you might also have to reassign clients to another site.Kent Agerlund | http://scug.dk/members/Agerlund/default.aspx | The Danish community for System Center products

SCCM 2012 R2 - Management Point deployment to untrusted domain

Hi all,
we've got two domains in our environment which have no trust relationship. I have sccm 2012 r2 installed on a Windows 2012 R2 server in the larger domain
and have just installed a DP and MP on a Windows 2008 R2 server in the second, smaller domain. The Management Point installed ok according to mpmsi.log but the problem i'm having is that the mpcontrol.log is now repeatedly throwing up the following message:
Call to HttpSendRequestSync failed for port 80 with status code 500, text:Internal Server Error
On the dp/mp server in the smaller domain i can browse to http://sccm-dp1/ ok. I can also browse to http://sccm-dp1/sms_mp/.sms_aut?MPCert ok. I cannot
browse to http://sccm-dp1/sms_mp/.sms_aut?MPList (receive a HTTP 500 error).
In additon to this, every now and again the MP tries to connect to the SQL DB in the other domain. This fails with the following errors:
MPStart(): RegisterWithWINS() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9002.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
MPStart(): PublishInDNS() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
EnableBranchCache(): configuration has not been changed.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
MPStart(): EnableBranchCache() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
Successfully Registered for IP Address Change notifications.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
MPStart(): RegisterForIPAddressChangeNotification() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Attempting to register the SQL connection type for the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Registered connection type for SQL Server 'xxxxxxxxx' and database 'xxxx\xxx_xxx'.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
MPStart(): RegisterSqlDatabaseConnectionType() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Checking the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
Getting the CLR Enabled value from the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Attempting to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Impersonating using the SQL connection account; user name is now 'xxxxxxxxx'.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
*** [08001][10060][Microsoft][SQL Server Native Client 11.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to
respond.        SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
*** [HYT00][0][Microsoft][SQL Server Native Client 11.0]Login timeout expired
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
*** [08001][10060][Microsoft][SQL Server Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL
Server is configured to allow remote connections. For more information see SQL Server Books Online.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
*** Failed to connect to the SQL Server, connection type: MP_CONTROL_ACCESS.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Failed to get connection to the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Failed to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Reverting back from using the SQL connection account.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Failed to get the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
MPStart(): CheckSqlDatabaseClrEnabled() returned 0x800720d9
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Waiting up to 300 seconds for the SMS Agent Host service to be running.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Stopped waiting for the SMS Agent Host service to be running; Result = 0x0.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
MPStart(): WaitOnSmsAgentHostRunning() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
MPStart(): CreateThread() succeeded with id 0x2fc.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10 1924 (0x0784)
SMS_MP_CONTROL_MANAGER successfully STARTED.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10 1924 (0x0784)
Can anyone provide any suggestions as to where i should begin troubleshooting this issue? When i deployed the MP to the smaller domain i ensured it
had a Management Point Connection Account which could access the SQL DB in the larger domain. I'm wondering if the two error messages i'm receiving are related or whether i have two separate issues here?
Thanks for the help!

Hi Paul,
thanks for taking the time to help. I registered asp.net v4 with IIS as per your suggestion, unfortunately it hasn't made much difference and i'm still seeing the "Call
to HttpSendRequestSync failed for port 80 with status code 500, text:Internal Server Error"
message repeating in mpcontrol.log. Have you got any further suggestions of things
to try? Seems like an error message i really need to fix!
As far as the MP to SQL issue goes, the network team assured me the connection is allowed
but i might get them to double check this just in case.
Thanks

Questions on managing iTunes content and devices?

I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
Creating a consistent storage location on a NAS
My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
Home Sharing
What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
Syncing devices from multiple computers
One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
iCloud Questions
I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.

I've been a subpar iTunes user for several years now and I figured it was time that I just started asking some questions in order to get help. I love all my different iOS devices, but at times it seems that it's extremely difficult to manage content amongst the devices as well as my different computers (I use a PC for personal use and a Macbook for work.) My wife also has her own iOS device (Which we just use my AppleID on to keep all purchases under a single account) and a PC. So it seems like a constant juggling act to keep my content properly managed.
The new iCloud stuff looks like a wonderful step in the right direction for helping manage content on my different devices, but I'm still a little curious about the best way to go about storing, sharing, and accessing content. So all that being said, here's my current setup and questions.
First of all, I have my iTunes Media Folder on set to save everything to a Network Attached Storage I have at my home. This is the version of iTunes that I run off of my PC, which I guess I would say is my primary source of iTunes usage and how I generally choose to manage my content and move things to and from my iOS devices. Everything works out pretty well until I try and manage my content on any other computer.
Creating a consistent storage location on a NAS
My first basic question is, "Is it possible to have multiple versions of iTunes on different computers point to the same Media Folder?" If I could have all of my iTunes folders work off the same Media Folder that would probably help cut down on the confusion. However, I'm not exactly sure if this is just a matter of giving them all the same path to use or if there's additional permissions and things that must be setup. Also, what happens if I decide to purchase content through iTunes and I'm not connected to my home network, so the content cannot be saved to my NAS? Does it save to a default location that I can just later move to my NAS?
Home Sharing
What exactly is "Home Sharing"? I've read a little bit about it but I'm not 100% sure what it actually gets me since I already have a NAS. Is this what I need for setting up multiple computers to share the same Media Folder? Do I need this at all since my data is located on a central NAS on our home network?
Syncing devices from multiple computers
One of the biggest headaches I get with trying to manage content across multiple computers and devices is that I have to use one specific computer to Sync and Manage content on a device. For example, I have my iPhone synced to iTunes on my PC so I can edit and manage music on that device from my PC. But if I'm at work on my Macbook and decide I want to make some changes to Music I have there, then I have to sync my device to the Macbook, effectively wiping all the current content on my phone. Is there no way around this?
iCloud Questions
I have content that I've purchased on my iPhone or iPad and want to download it from the cloud to my PC or Macbook, or my wife's computer. Do I have to "repurchase" this content in order to do that, or does it just download directly for free since I've already purchased it before?
I apologize if any of these are "silly" questions. I've tried to read up on this stuff but I still have difficulty completely understanding it.

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Do any versions of FF support the use of Lenovo's ThinkVantage Password Manager s/w and fingerprint scanner?

Lenovo Edge 15" laptop running Windows 7 (64 bit) and using Thinkvantage Password Manager Ver 3.20.0330 and TouchStrip Fingerprint Sensor (UPEK).
The password manager is to set to restrict logins to websites to fingerprint but when logging into websites I am not given the option to use the fingerprint reader -(the login info stored in the P/W manager is entered and login takes place). I have seen elsewhere that FF 3.6 has problems supporting this combination and wonder if any earlier versions of FF would be suitable or if FF 4 is likely to support it.
Any help would be appreciated

Kent1968
I would recommend, if you have it set, to go to a restore point before you uninstalled the password manager version that did not give you a problem and not use the new version until this bug is resolved.
If the fingerprint light is not showing up, then it is probably not limited to you and I hope Lenovo checks it out.
Too bad the newer version seems to load slowly - I will check it out as well.
jEdgar

Management Tool to manage both Catalyst and Nexus

Is there a single network management tool to manage both Nexus and Catalyst at the same time?

Oracle does not provide any tool for altering the contents on an existing dmp file.
What you probably should do is filter the data prior to extraction. There are actually third party tools to do this such as Priceton Softtech had such a tool which IBM bought the company to get. It would extract data into files and then manipulate the table column data while maintaining the PK to FK relationships. That is if it changed the value of a PK it would update all the FK that pointed to the old value to point to the new value.
Naturally, you can do this yourself.
You could define a set of manipulation tables, insert/select the data, manipulate it, then export and import the data from these tables.
Filtering can be fairly simple or pretty complex depending on the number of objects involved, the amount of data, and the number of sensitive columns.
HTH -- Mark D Powell --

Management Point 0Bytes and Critical

Similar Messages

Maybe you are looking for