Management point and Distribution point behind netscaler for virtual ip/dns name

Is it supported to place a server behind a netscaler for using a virtual IP/DNS name?
We are looking into placing our distribution points and management points behind the netscaler to provide firewall functionality.
We would point our clients to a different DNS name for each individual MP and DP to provide routing through the netscaler.
As far as I know this is only possible using IBCM.
Please let me know if this is possible without IBCM internally.

Using a different DNS name is problematic as there is no way to specify an alternate fqdn for a site system on the intranet. Clients use the actual fqdn of the system hosting the role; this is given out by the MP directly to the client based upon the site
system's actual name.
You could manipulate name resolution in a variety ways so ultimately the actual IP used wouldn't matter, but that's useless unless the client is using the proper name.
If you you could use the same name and IP, then it should work no problem as long as the traffic is properly delivered to the site system. Ultimately, nearly all client agent to site system traffic is nothing more than WebDAV via IIS on the site system so
just basic web traffic.
Jason | http://blog.configmgrftw.com | @jasonsandys

Similar Messages

Sbs2008 seems to want to ping everything in IPv6 and cannot see a lot of hosts by DNS name - causing issues with RWW and Connect to My Computer

HI,
we have an SBS2008, has been working fine for a long time, don't know when or why this issue has started.
A user couldn't connect to PC using RWW - so I checked rdp to that pc from the server and also couldn't rdp to pc - checked ping and couldn't find host = no DNS (although there IS an entry in DNS). Ping by IP is fine 192.168.10.114
Added host entry for this PC and all works fine
BUT...
there are other users with the same problem, and when i ping other devices by name from the SBS it either can't see them, or it uses IPv6 - something i think i remeber us disabling (with the help of Microsofdt Support) year sago when the server went in,
and had internet DNS issues.
I have tried flushing dns cache on server to no avail.
All PCs show in the SBS console as status "unknown" which i have seen before with DNS issues.
can anyone help?
Thanks,
JJ

Hi,
Lets make sure we are running Single NIC on the server. DNS pointing to Servers IP Address itself. Disable TaskOffloading and Receive Side Scaling on the NIC and reboot the server.
Note - Don't disable IPV 6
If you have any further queries you can call me - 214-347-7988214-347-7988
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Ports to open a management point

Guys,
I want to manage the servers in our other VLANs that are not accessible to SCCM. I have built a management point in those vlans but am not sure what ports and protocols need to be opened to SCCM.
Any ideas ?

Hi,
It is all explained in the technet documentation here:
http://technet.microsoft.com/en-us/library/hh427328.aspx
From the article above:
Traffic both ways between Site Server and MP:
RPC Endpoint mapper
135
RPC
DYNAMIC
Server Message Block (SMB)
445
From MP to SQL Server -- 1433
But, having more than one management point is intended for scalability and availability. Your clients will try to contact both of these MP's and in scenarios like this I have experienced a lot if issues with clients not communicating with their MP. MP assignement
does not use Boundary and Boundary Group, the clients will use one of those two MP's there is no way to control which one.
I would make sure that the VLAN can communicate with the MP that already exists instead.
Regards,
jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Management Point will not install

Hi,
I am using Windows Server 2012, SQL 2012 with cu2 and SCCM 2012 sp1, and I have one Primary site which will host all site roles.
I am trying to install the Management Point (using HTTPS for client connections) but it fails.
I did have the SCCM 2007 client install on this server which was delivering windows updates and FEP 2010 to the server, so after seeing a similar proplem reported and looking throught the msisetup log which said a previous version was detected, I used ccmsetup
/uninstall to remove the client (which gets rid of it from control panel), and then removed the MP, rebooted and tried to install the MP again. However, the MP still wont install
mpmsi log as below:
[9:53:33] Failed to compile 'D:\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[9:53:33] Compiled 'D:\SMS_CCM\CCMVDI.mof'
[9:53:33] Compiled 'D:\SMS_CCM\ccmauthmessagehook.mof'
[9:53:33] Compiled 'D:\SMS_CCM\LocationServices.mof'
[9:53:33] Compiled 'D:\SMS_CCM\NetworkConfig.mof'
[9:53:33] Failed to compile 'D:\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[9:53:33] Compiled 'D:\SMS_CCM\PolicyAgentEvents.mof'
[9:53:33] Failed to compile 'D:\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[9:53:33] Failed to compile 'D:\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[9:53:33] Compiled 'D:\SMS_CCM\CcmExec_MPFramework.mof'
[9:53:33] Compiled 'D:\SMS_CCM\SmsCommon.mof'
[9:53:33] Compiled 'D:\SMS_CCM\XmlStore.mof'
[9:53:33] Compiled 'D:\SMS_CCM\InventoryAgentEvents.mof'
[9:53:33] Compiled 'D:\SMS_CCM\SWMtrEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\SWDistEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\SrcUpdateEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\PatchMgmtEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\SMSNapEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\MpStatusForwarderDefaults.mof'
[9:53:34] Failed to compile 'D:\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
[9:53:34] Compiled 'D:\SMS_CCM\mp_pss.mof'
[9:53:34] Compiled 'D:\SMS_CCM\mp_ccmConfig.mof'
[9:53:34] Compiled 'D:\SMS_CCM\mp_ccmConfig_Defaults.mof'
[9:53:34] Compiled 'D:\SMS_CCM\MpEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\OSDEventClasses.mof'
[9:53:34] Compiled 'D:\SMS_CCM\DPStatus.mof'
[9:53:34] Compiled 'D:\SMS_CCM\ImgDeployEvents.mof'
[9:53:34] Compiled 'D:\SMS_CCM\DCMClientEvents.mof'
[9:53:35] Compiled 'D:\SMS_CCM\SUMEvents.mof'
[9:53:35] Compiled 'D:\SMS_CCM\OOBMgmtEvents.mof'
[9:53:35] Compiled 'D:\SMS_CCM\PwrEvents.mof'
[9:53:35] @@ERR:25140
MSI (s) (8C!1C) [09:53:35:212]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (8C:70) [09:53:35:241]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (8C:70) [09:53:35:248]: User policy value 'DisableRollback' is 0
MSI (s) (8C:70) [09:53:35:248]: Machine policy value 'DisableRollback' is 0
Action ended 09:53:35: InstallFinalize. Return value 3.
MPsetup.log is below:
<01/17/13 09:52:54> SMSMP Setup Started....
<01/17/13 09:52:54> Parameters: D:\SCCM\bin\x64\rolesetup.exe /install /siteserver:SCCM01 SMSMP 0
<01/17/13 09:52:54> Installing Pre Reqs for SMSMP
<01/17/13 09:52:54> ======== Installing Pre Reqs for Role SMSMP ========
<01/17/13 09:52:54> Found 2 Pre Reqs for Role SMSMP
<01/17/13 09:52:54> Pre Req MSXML60 found.
<01/17/13 09:52:54> No versions of MSXML60 are installed. Would install new MSXML60.
<01/17/13 09:52:54> Enabling MSI logging. msxml6_x64.msi will log to D:\SCCM\logs\msxml6_x64MSI.log
<01/17/13 09:52:54> Installing D:\SCCM\bin\x64\00000409\msxml6_x64.msi
<01/17/13 09:52:54> msxml6_x64.msi exited with return code: 0
<01/17/13 09:52:54> msxml6_x64.msi Installation was successful.
<01/17/13 09:52:54> Pre Req SqlNativeClient found.
<01/17/13 09:52:54> SqlNativeClient already installed (Product Code: {D9DDE0F8-0CFD-4C0F-8A07-C815DE47FF4D}). Would not install again.
<01/17/13 09:52:55> Pre Req SqlNativeClient is already installed. Skipping it.
<01/17/13 09:52:55> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<01/17/13 09:52:55> Installing the SMSMP
<01/17/13 09:52:55> Passed OS version check.
<01/17/13 09:52:55> IIS Service is installed.
<01/17/13 09:52:55> No versions of SMSMP are installed. Installing new SMSMP.
<01/17/13 09:52:55> Enabling MSI logging. mp.msi will log to D:\SCCM\logs\mpMSI.log
<01/17/13 09:52:55> Installing D:\SCCM\bin\x64\mp.msi CCMINSTALLDIR="D:\SMS_CCM" CCMSERVERDATAROOT="D:\SCCM" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=63 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/17/13 09:55:52> mp.msi exited with return code: 1603
<01/17/13 09:55:52> Backing up D:\SCCM\logs\mpMSI.log to D:\SCCM\logs\mpMSI.log.LastError
<01/17/13 09:55:52> Fatal MSI Error - mp.msi could not be installed.
<01/17/13 09:55:52> ~RoleSetup().
<01/17/13 09:59:03> ====================================================================
Has anyone seen this problem before and could advise me on a fix? The DP has installed fine.
Thanks
Jaz

Im having the same issue in our LAB's...
Install is a Win 2012 + SCCM 2012 SP1 + MSSQL 2008R2 SP2
In this environment I had Win 2008R2 SP1 + SCCM 2012 + MSSQL 2008R2 SP2 previously without any issues but have blown it all away as we are going the Win2012 and SCCM 2012 SP1 way.. Running inside the environment is a SCCM 2007R3 instance.. Currently testing
migration.
Win2012 doesn't have the agent from SCCM 2007 R3 installed
mpMSI.log
MSI (s) (1C!5C) [17:52:23:024]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried the ccmclean and UAC has been disabled from the start..
Any help would be awesome

Sun Management Center and Reduced Core Installs

hey all,
I just discovered the Sun Management Center and the tool looks great for the servers I need to manage. However due to security reasons all our servers are installed as Reduced Network Core installs where we then add the minimal extra packages.
At the moment I am still testing everything but I am a bit stuck here and I believe that I might be missing some packages. I can get the server to find the agent but there I cannot load any of the modules. Sniffing the traffic does seem to show that the info is sent ( a list of names I recognise as module names) but the console does not show anything and reports an error unable to load module info.
Is there a full package list that is required to run the management center server and client? The agent runs fine on my desktop but that is a full install.
I already noticed the command ping is required, but am unsure about snmp daemons. What other packages will i need to install? The manual doesn't really give any information on that and seems to start from a full install

Never mind,
The problem was in the firewall who was defragmenting packets. Once I disabled that feature the server worked fine.
Seems just ping is enough to get the installer working.

Get plant from sales org and distribution channel

Hi expert,
how to get default delivery plant from sales organization and distribution
channel.
thanks,
neo

thanks for your quick reply,
i saw table tvkov which has field vkorg,vtweg
but in tvko i found vkorg only .
i don't get vtweg in tvko table,
can u tell me which two condition i need to use ofr join,
one is vkorg and the other one (?) i don't get it.
thanks,
neo

How to get Unique calid for users with same name in multiple domain env..

I found we need to use "-k legacy" option for creating users in non-hosted setup..
I had two domains default as xxxx.com and the one that I created as yyyy.com
When I have users with same name in two of the domains as user1..
The calid for both of them is... user1 ....so they share the same calendar
When Im in valid SSO of yyyy.com I get the mail account for user1 as [email protected] .....but the calid .. common as user1
How I can get unique calid for users under two domains..
whether I need to set Hosted domain support...Then how the mailid's differ with out using hosted domain support..
And I need to login UWC without using @domain.com...
Help me on this...
Ashik

Do you have UWC and Cal configured at least for virtual domain support?
basically.. for discussion.. let's say you have three domains on your server.. 1st domain is the default domain. other 2 domains are virtual domains.
if all domains were created with mail and cal support (-S mail,cal).. you would use the following options when creating users:
1) for the default domain.. you must use the "-k legacy" option when adding users.
2) for the other two domains.. when you create the user.. do NOT use a "-k" option.
If you do not use the "-k" option.. it defaults to "hosted" which will cause the user's calid to be [email protected]
If you Do use the "-k legacy" option.. it will create the calid as just "userid"
With regard to logging into UWC without the @domain.com part of a username in a hosted domain.. the easiest way to avoid this.. is to point a host name under the hosted domain to the server.
if you point webmail.xxxx.com to the server... and then access it via:
http://webmail.xxxx.com/uwc/
any users in the xxxx.com hosted domain will NOT need to use @xxxx.com when logging in... they can just use "userid"
This feature does not take any special configuration (aside from adding a DNS entry for the hosted domain)
Hopefully that helps.

SSRS 2008 r2 - the Report Manager won't load unless "/Reports" is added to the DNS entry in address bar

Need some direction, please.
We are moving off SSRS 2005 to a new server with SSRS 2008R2. The old installation (2005) a DNS entry was created "reports" with the ip address and port number simple. In the Configuration manager the Report Manager Virtual Directory
is "Reports". Website is Default web site. Typing "reports" into the address bar opens up report manager. When this is done the address shows as reports/reports/pages/folder etc.
The new installation is configured the same(?). DNS entry "reports2" with new ip address and port number. In the Configuration manager the Report manager URL virtual directory is "Reports" URLs: =
http://servername:port/Reports. The issue is when typing "Reports2" into the address bar the report manager won't open unless "reports" is added to the dns name i.e. http://reports2/reports
is entered.
This thread took me to more like kind thread than my searches. Went into IIS in the default web site I added an htm file with a redirect. Then started it, it works. Maybe due to my inexperience but seems counter intuitive as I thought Reporting Services did
away with any reliance on IIS.

Hi Urquhart,
According to your description, if you type "Reports2" in the browser, then you want to redirect to the report manager homepage in SSRS 2008 R2, right?
In Reporting Services 2008 R2, it uses HTTP.SYS for HTTP access and it’s independent of Internet Information Server(IIS). The role for HTTP.sys in Reporting Services is that, HTTP.sys receive the user's request, and then send it to report server. Report
Server handle the request(e.g. authenticate the users), and then use HTTP.sys the send HTTP responses again. In a word, HTTP.sys is just a driver, which allow us to communicate the clients(browser) with Report Server without Microsoft Internet Information
Server(IIS).
So, since HTTP.SYS doesn’t provide URL redirection function, we are not able to redirect "Reports2" to report manager homepage by default. If we want to use redirect function, we should add a .html file in IIS to redirect the user to the report
manager.
Similar thread for your reference:
SSRS 2008 URL Redirecting
SSRS 2008 R2 Homepage Redirection
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Osx server website for virtualized application

I hope someone can help me.
On my OSX Mavericks server, I have a virtualized tomcat application. There is a Virtualbox instance, running Ubuntu, with bridged network. This means I have a unique IP number for this virtual machine. For tomcat I need to go to port :8080
I do want to set a "subdomain.domain.com" to open this 123.1.1.1:8080.
How do we set this in the webserver part of OSX server? Is this possible?

You will have two sets of DNS servers, your public DNS and the DNS running on your local network. If your external DNS is getting to your servers, then that's probably working. If you are getting the public IP address from your local network, then your gateway-router needs to "reflect" that address, or you'll need to configure local DNS services (OS X Server needs that in any case) to provide the local IP address for the public DNS name.
Put another way, read the article cited earlier and make sure your local DNS is correct. You can test for most of the common network and DNS configuration errors with the following harmless, diagnostic Terminal.app command:
sudo changeip -checkhostname
...and this will tell you about the configuration, and whether no changes are required, or about the various errors that might be detected.
You can see what IP address you're getting with the following Terminal.app command:
dig +short oc.example.com
...or whatever DNS host name you're using. You'll get either the public IP address (which if you use on the local network, your gateway-router needs to be able to detect that and run the connections back into your network) or your internal local network address.
Your local network clients will want to reference your local DNS server.
Do read the article cited earlier, too.

SCCM - Branch Distribution point and Management point on the same server

Hi All,
Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
Rgs,

Hi,
Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
prerequisites needed.
Can you elaborate on which roles you are considering installing?
Steven Hodson | http://www.stevenhodson.com | @_hodders

Diappearing photos replaced by an exclamation point within a triangle. Prior to loading Lion I could put the image number in finder and locate the original file for that photo. How do I restore photos now?

I had problems with photos disappearing and being replaced by an exclamation point within a triangle. I can see the photo in the thumbnail summary but when you click on it, the screen goes black and the exclamation point within a triangle appears along with the info on the original image number (i.e., img_1120.jpg). Prior to loading Lion, I could go to Finder, enter the image number and locate the original file for that photo. I could then restore it for editing, copying into Print Shop directly, etc. That no longer works after installing Lion. How do I restore photos now? I have 100s of photos that I have been going back to the original files and restoring and I am frantic that I will no longer be able to get to the original files. Please help! Thanks

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Internet based management of SCCM clients and management points ?

We have an SCCM backend infrastructure which is used to manage what is in affect multiple external organizations over the internet. Currently each SCCM client is managed by the primary server directly over the internet.
Am I right that we could place a configmgr management point on the internal networks and for the clients to talk to this server when connected to the company network instead of all clients getting patched across the internet connection ? Meaning that
just the MP would communicate with our backend infrastructure ?

So your internal clients are now connecting over the internet to the local MP? How does this setup look like exactly? How were the clients installed (parameters)?
Torsten Meringer | http://www.mssccmfaq.de

Uninstall and Reinstall Secondary Site Management Point Role

Dear Brothers,
I have an issue with one of my SCCM 2012 Sp1 with CU3 Secondary Site Server which the client failed to install on the actual server due to a client issue observed in the CCMSetup.log.
Observation Regarding the issue:
Issue Detail No1.
SCCM Client is not installing to my Secondary Site Server with site code (XYZ), after all the site server are also clients in SCCM hierarchy so it self needs SCCM Client as well.
CCMSetup.log:
"Error 25150. Setup was unable to register the CCM_Service_HostingConfiguration endpoint" when you try to install the client agent in Configuration Manager"
According to http://support.microsoft.com/kb/2905359
the solution is to :
1. Uninstall the management point role.
2. Reinstall the client agent on the management point computer.
3. Reinstall the management point role.
Issue Detail No 2.
When I am trying to uninstall the Management Point Role via SCCM Console as part of the solution posted on the above KB Article, unfortunately the delete or uninstall option is been greyed out.
Now a lot of discussion on the topic "Can not remove management point role is greyed out "under this thread
http://social.technet.microsoft.com/Forums/en-US/1a039893-4a65-4dc9-9feb-e6f09ea1fc0b/can-not-remove-management-point-remove-role-is-greyd-out?forum=configmanagerdeployment
However on the last comment of the above thread from"Trana010"
stated a tool or a command
C:\program files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:(sec server name) SMSMP
0
Which I never tried yet, and also cannot find a reliable KB supporting the command "rolesetup.exe".
Questions:
1. What is the best way to uninstall/Reinstall the management point on secondary site considering the above issue details?
2. Should I installed CU4 directly instead? Maybe it will resolved the issue even though it is not related to the current case
Regards,

Well, it's by design that you can't remove a management point on a secondary site, so I can imagine that that's why there is nothing "official" written on that subject. I think there are three things you can do:
Try to run the command line (which is probably unsupported)
Submit a CSS call
Upgrade to CU4 and assume the problem is gone.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Dear Peter,
I end up shooting a case with CSS, he guided me and share that this issue is very common.
The reason is that it requires CU3 upgrade (Configmgr2012ac-sp1-kb2882125-x64.msp) to be installed with the SCCM Client installation (The same time) via command line in an elevated permission.
Follow the solution provided by Microsoft Support:
CCMSetup.exe /forceinstall SMSSITECODE=XYZ CCMENABLELOGGING=TRUE CCMLOGLEVEL=0 PATCH=C:\Configmgr2012ac-sp1-kb2882125-x64.msp
It seems the Client Push provided by SCCM 2012 Sp1 Infra, that includes your Hotfix under the "Hotfix" folder under the client source folder somehow doesn't work with this issue, that's why the work around is to help the ccmsetup to grab the Hotfix with
by providing the path for the hotfix instead of relying to take the hotfix for the hotfix folder.
Overall peter thanks for your suggestion. And also to Mr. Jason Sandys opening the option for an R2 upgrade, I will look into the KB for this to plan for implementation.
Regards,

Management Point 0Bytes and Critical

Hi All
Using System Center 2012 R2 and have deployed the Management Point role to two different Windows Server 2012 R2 servers. Now within the SCCM Console under Site Status my Management Point role shows as Critical and the Total Size shows 0 Bytes - when I go
to Show Messages and select a time before the role was installed, no error messages appear.
No errors appear for any components under Component Status.
Not sure where I can go from here
Thanks

Have you checked the actual MP log files (http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_MPLog ) MPControl.log specifically?
How about sitecomp.log since it is what is responsible for doing component availability and disk space checks?
Jason | http://blog.configmgrftw.com | @jasonsandys

Management point location for workgroup clients in DMZ

Hi All,
I am trying to install the SCCM 2012 client to some servers that are located in a workgroup and in a DMZ at our organization.
I have read up about the config for this and I think that we have everything in place but the clients themselves are not locating a management point which I think is due to the setup of the IIS on the management points.
Firstly, I ammended the local hosts file on the system to ensure that the server could resolve the SCCM site server and 2 management points by using NetBIOS and FQDN. I also checked that the ports are opened from the client to the
management point.
I then ran ccmsetup using the following switches /noservice /mp=smsmp SMSSITECODE=XXX SMSSLP=SMSMP FSP=SMSSITESERVER CCMHTTPPORT=24555 CCMHTTPSPORT=24556 RESETKEYINFORMATION=TRUE which appers to have sucessfully installed the client
but is now failing to communicate with the MP specified. I am seeing on the client the following repeated in the locationservices.log
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
            DateTime = "20141127153834.775000+000";
            HostName = "SMSMP";
            HRESULT = "0x87d0027e";
            ProcessID = 4004;
            StatusCode = 401;
            ThreadID = 5184;
]LOG]!><time="15:38:34.775+00" date="11-27-2014" component="LocationServices" context="" type="1" thread="5184" file="event.cpp:715">
<![LOG[Successfully sent location services HTTP failure message.]LOG]!><time="15:38:34.962+00" date="11-27-2014" component="LocationServices" context="" type="1" thread="5184"
file="ccmhttperror.cpp:396">
<![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']LOG]!><time="15:38:34.962+00" date="11-27-2014" component="LocationServices" context="" type="3"
thread="5184" file="util.cpp:2568">
<![LOG[Workgroup client is in Unknown location]LOG]!><time="15:38:34.962+00" date="11-27-2014" component="LocationServices" context="" type="1" thread="5184"
file="lsad.cpp:1078">
<![LOG[[CCMHTTP] ERROR: URL=http://SMSMP, Port=24555, Options=224, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!><time="15:38:34.993+00" date="11-27-2014"
component="LocationServices" context="" type="1" thread="5184" file="ccmhttperror.cpp:297">
And on the management point I am seeing the following repeated in the IIS logs
x.x.x.x HEAD / - 24555 - x.x.x.x SMS+CCM+5.0 - 401 2 5 216 0
I understand that this points to the IIS authentication issue so I have tried browsing to http://smsmp.domainname.com/sms_mp/.sms_aut?mplist and
I do get a list of management points returned so I'm a little confused now. The other thing that confuses me is that we also have another domain we manage clients
in and these systems have all registered with the MP fine even though there is no trust relationship in place between the 2 domains.
I have checked anonymous authentication has been enabled on the SMS_MP virtual directory but I can see that it is set to use a user account of IUSR, but this is not a local user on the MP nor an AD user from what I can see.
Is anybody able to point me in the correct direction of either what I am doing wrong or which settings I should be checking?
Thanks in advance for any help
Andrew

You mention in your ccmsetup install properties: CCMHTTPPORT=24555 CCMHTTPSPORT=24556
While the MPList test you provided shows:
http://smsmp.domainname.com/sms_mp/.sms_aut?mplist
This is on port 80
Where is your MP? Port 80 or 24555 ?

Management point and Distribution point behind netscaler for virtual ip/dns name

Similar Messages

Maybe you are looking for