Manager approval message

Hello
The 1st stage approval for our workflow is the user's Manager. Where do I go to configure the message for this 1st stage? Right now the Manager just gets a blank email with a hyperlink that says View. When you click on the hyperlink, it opens CUP with the request details, but I obviously need to provide more description for this 1st message.
The requestor gets a detailed email with the request number and a link to open it up to view it.
Thank you in advance
Jon

Hi,
Go config >> workflow >> stages
Open your manager stage
Add your notification in Next Approver Tab
regards,
Vit

Similar Messages

Even after manager approves timesheet, it still shows data

Hello Friends,
I am working on FIORI Timesheet approval app and once manager approves timesheet, message says "Timesheet approved successfully". But, if I go back to launchpad home screen and it still shows the employees timesheet for whom Manager has approved.
Please find attached below screenshot
Srikanth

Hi Srikanth,
Probably you use old support package. Please check you have the latest support package.
SRA010 SP03 is the latest one.
Regards, Masa
SAP Customer Experience Group - CEG

HOW TO MANAGER APPROVE LEAVE REQUEST AT A TIME MORE THEN TWO

Hi Experts,
This is Kalyan.I am working on ess/mss . How to manager approve four work items at a time .
And how to add Custom Fields in UWL .Can u please help me.
Regards,
Kalyan

Hi Kalyan
Suppose if multiple persons raise workflows like Leave, Travel, Claims, Loan every workflow is different. You cannot have single workflow and single work item. The work item comes to UWL for the approver. In the UWL you can customize the screen put a radio button in the screen such that only approve and reject button. So every wprk item can be just selected with approve and reject radio button on the UWL itself. Finaly update button will update the entier page with the approvals. But this is very very very difficult.
Think logically Y the approver wants to do mass approval. Suppose the approver receives the leave work item without seeing the leave quota will he approve?. Similiarly for travel without seeing the expense amount will the approver approve the trip.
UWL is for all the module like Travel, Leave, Claims, Loan etc. Every module the approval screen itslef different. So mass approval is not possible.
If ESS is implemented only for Leave or Travel or Payroll then its possible. In that case customize the UWL with radio button and after mass approve or rejection finally need to update. But this is absolutly not advisable since every person the data are different. So mass approval is not advisable.
I think am logically correct?
Regards
vijay

How to make manager approve more than one request in one time in SSHR

Dear All,
Anyone has an idea on how to make manager approver more than one request in one time in SSHR??
for example, manager is having 20 requests to approve on Change Pay Function, he don't want to check one by one and approve it, he want to approve the 20 requests directly from one time, is there any solution for that??
Thanks and Regards

Hi Adel,
As Vignesh has mentioned we don't have any standard functionality which will allow bulk approvals. We had same kind of requirement in performance management where the business was asking for a bulk approval feature which should be available to Skip level manager for approving the rating suggested by line manager. We had created a custom page which will list all the notifications and user can select the ones which S/He wants to bulk approve and click submit button. Internally we had called the workflow with item key and other required parameter and do the approval.
You can have a work with your technical guy and can work on the same lines.
Thanks,
Sanjay

AP completes audit before status is 'Manager Approved'

Hi,
This is regarding the sr 3-3926612411.
Product version is 11.5.10.2
Issue
===
Customer wants to know is there any way to prevent AP to complete audit if the report status of the expense report is not 'manager approved'?
The expense report was audited for the first time on May 3 and the expense report was approved by 2 more managers after that and then re-audited again on June 8. However the report was never imported into AP, and we asked the preparer to withdraw and resubmit for approval and the whole approval process has to re-run again and a lot of time is being delayed on the payment to the requestor. It appears that because AP completes audit before manager approval it does not complete the flow properly into AP
Please advice!!
Sruthi

Hi ,
Please help!!

Approval messages not coming back when approving by mail

Hello,
We are on SRM 4.0
Approval messages are sent from SRM to different approvers by mail. This works fine.
But when the person approves by mail this doesn't work.
In transaction sost messages are still with 'grey' status and in transaction scot messages are all in status 'in transit'.
This happens only in our Production environment.
Has anyone suggestions?
Thanks,
Laurent.

Further to my previous reply , please also check the following
>
In transit
Number of send orders that are currently in process
outside of the SAP system, that is, the messages have
been transferred to the external nodes by the SAPconnect
send process but neither a positive nor a negative status
message has been received
>
check the following in your system
transaction SCOT--> in the menu
Settings ---> confirmation of reciept
have you set the value to 'SAP connect does not expect confirm.for
internet mail ?

[svn:bz-trunk] 18839: bug fix BLZ-575 Potential race condition in flex. management.runtime.messaging.endpoints.EndpointControl

Revision: 18839
Revision: 18839
Author:   [email protected]
Date:     2010-11-29 12:26:32 -0800 (Mon, 29 Nov 2010)
Log Message:
bug fix BLZ-575 Potential race condition in flex.management.runtime.messaging.endpoints.EndpointControl
Change a few counters to Atomic numbers
Probably solve some PMD bugs too (was complaining about new Integer() and new Long() API)
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-575
Modified Paths:
    blazeds/trunk/modules/core/src/flex/management/runtime/messaging/endpoints/EndpointContro l.java

Disable Status Manager Approval

I Have the Task Status Manager Approval set to disabled but the person who published the project is seeing task approvals in the Approval Center. Is this the designed behavior?
The behavior I want is when someone submits their timesheet, I want it to go straight to the timesheet manager for approval.

John --
The flaw in your assumption about Project Server 2013 is that people can fill in Timesheets about task work, and then NOT have the task work update the relevant project. The Project Server 2013 system is programmed to do the exact opposite of what
you want. When a team member fills out and submits a timesheet containing task progress, the system automatically sends an approval update request to the project manager. The project manager can see these pending approvals in the Approval Center
page in PWA, where he/she can approve or reject the task updates. Once the task updates are approved, the system pushes the task update data into the project.
The only way to avoid this behavior is to capture top-level data in timesheets from your team members. By doing this, your team members can enter hours worked on the project as a whole, but not enter progress against individual tasks.
Hope this helps.
Dale A. Howard [MVP]

Unable to see the manager approval mail

Hi Folks,
After once the manager approves/Send travel request back for corrections from the MSS UWL,where can an employee see the manager responce from the ESS side along with the managers description that was mentioned in his responce.
Regards
Siva

Hi Siva,
In this scenario, a mail will be triggered to the employee, which contains the correction remarks entered by Manager.
This may also be displayed as a task in the Employee Work List.
You can also view the triggered mail from SOST transaction.
Hope this helps.
Thanks,
Prashanth
Edited by: Praisty on Mar 29, 2011 3:42 PM

CS5 Service Manager error message?

I keep getting the CS5 service manager error message - ordinal not found. Specifically ' the ordinal 3873 could not be located in the dynamic link library LIBEAY32.dll' Any ideas please on how to fix this?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

InDesign Content Manager error message in CS3

I recently switched laptops (XP to Win7) and now I'm receiving the InDesign Content Manager error message. I'm running CS3 and the InDesign file is CS3, as well. I also ran the plug-in and software update, but I'm still unable to open any InDesign files. Any help to resolve this issue would be appreciated.

Sorry Willi, that's jut not true. I run CS3 with no issues whatever on two different Win7 pro x64 systems.
I don't, however know what that error message is. Is there any more to it? Have you tried running as Administrator or in XP compatibility mode? (I don't run in compatibility mode, but my users are admins). Do you run a font manager? What do you have for Anti Virus and Malware scanners?

ECM EHP4 - status of IT759 not updated when manager approves

Hi, we are implementating ECM on EHP4 and are having issues in the planning overview iview. when a planning manager approves an org unit, the status of IT759 for the employees it not being updated from submitted to approved. I have checked the user interface config and we have the tick box checked for allow approval process.
Also, once the org unit is in approved status, we cannot reapprove. I have tried using PECM_ADJUST_0759 - Adjust Compensation Process Records , to reopen the approved org unit and reinitialise but this does not work.
does anyone have any ideas?
Thanks Tanya

Hi Tanya,
Use PECM_CHANGE_STATUS to reset the 0759 records from Approved or Submitted back to In Process. Or the other way around. Very useful transaction.
As to your first question, from your description you are having the planning manager Approve the proposed pay changes. Normalthe planning manager will Submit and then a higher level manager will Approve or Reject. We used a separate area for the Planning vs. the Approval/Reject step. Only proposals in Submitted status are available for Approval/Rejection.
We are removing that process this year as we had the same problem of always resetting. So we just allow the adjustments to remain In Process throughout the review period. Then use PECM_CHANGE_STATUS to move to Submitted, Approved and Activated.
Paul

Approval message

Hello,
This is the scenario: a user is logged into SAP twice (once on one machine and once on another machine) and on one client sends an approval request (e.g when adding a sales order over £100). The authoriser approves the request and a message is sent back to the originator. Even though the originator is logged in twice, the internal message to say that the document has been approved only gets sent to one of the clients the originator is logged in to. Do you know what determines this? Why does it only go to one and not the other? I've done some testing and it doesn't seem to be sent to the client that created the approval request so i'm not sure how SAP decides which one the message goes to.
Any advice would be much appreciated.
Many thanks,
Kate

Hello Kate,
It is not as easy to give you a definite answer because this depending on database operation. If the user has two concurrent sessions, chances are: the earlier session may receive it most. It is all depending on the timing. Only the session without locking the table can receive the approval message.
Thanks,
Gordon

How to cancel Travel Request after manager approval?

Dear All,
Version EHP6 and 7.3
Client is Indian.
BUSINESS PROCESS:
Employee applied Travel Request -----Manager approved----Travel Admin booked Tickets --- Employee has taken travel advance also.
Now due to employee personal problem he do not want to travel. Now He want to cancel.
Can employee get cancel option in ESS portal?
How FI will recover the amount?
What is the process?
Regards
Somu

Hello
There is no functionnality to cancel a trip in ESS portal (only possible to delete it, but deletion is only for "non posted" trips).
It is possible from backend : Canceling a Trip That Has Been Posted - Travel Management (FI-TV) - SAP Library
Regards
Mathieu

Trying to install Akamai Manager error message

I have tried to down load my new upgrade but when I go to install Akamai Manager I get this message. Java Plug-in 1.5.0_30 Using JRE version 1.5.0_30-b03-389-9M3425 Java HotSpot(TM) Client VM User home directory = /Users/gayeshakeshaft

Hi
I am upgrading from CS3 DS to CS5.5 DS
Mac OSX 10.5.8
ChocCards
Date: Sat, 10 Dec 2011 09:59:38 -0700
From: [email protected]
To: [email protected]
Subject: Trying to install Akamai Manager error message
    Re: Trying to install Akamai Manager error message
    created by Gautham K in Downloading, Installing, Setting Up - View the full discussion
Hi, Which product upgrade are you trying to install using the Akamai Download Manager? Also, which operating system is your computer running on? Thanks
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4075704#4075704
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4075704#4075704. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Manager approval message

Similar Messages

Maybe you are looking for