Manager Crystal Reports - exemption from: HResult: 0xFFFFE48e

Hey,
We are getting the error: exemption from: HResult: 0xFFFFE48e when trying to access Manage Crystal Reports.
Running SBO 2007 SP01 PL 09 Hotfix 2
Any ideas??
Jacques

Hi Gordon,
We uninstalled CR and still getting the same error.
Runtime is installed. The installation worked fine but then we suddenly started getting this error.
Jacques

Similar Messages

Crystal report viewer from portlet

Hi,
I have a problem with opening Crystal report viewer from portlet. I am using Spring portletMVC but this doesnt matter in this case. After clicking some button a controller process form in method where is access to ActionRequest, ActionResponse. But how can I "redirect" with some parameters to plain JSP page where I can write something like this:
CrystalReportViewer viewer = new CrystalReportViewer();
     viewer.setReportSource(rcd.getReportSource());
     viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
     viewer.dispose();
Oh, perharps is understandable, sorry for my English and thanks for helping. Any code of link would be wonderful.

I haven't worked with Crystal Reports in quite awhile, but in the past I've written code to launch Crystal Reports using OLE. If I recall correctly, there existed an ActiveX control that could be embedded into VB forms, and the like. I'm unsure, however, whether they continue to support this mechanism. Given that your requirements do not allow CLIENT_HOST or DDE, however, I am guessing that OLE automation would also be unacceptable.
Have you looked at WEB.SHOW_DOCUMENT?
Eric Adamson
Lansing, Michigan

Crystal Reports functionality from Save The Cat

Sorry if I've missed this in the presentation video since I've only watched half of it, so I have no idea if this has been considered for development.
I use "Save The Cat" from Blake Snyder to storyboard my scenes with Crystal Reports - minus his structure.. and I create my own story templates and then drop the whole thing into "Final Draft".
If I had the flexibility to setup and re-use "structure" templates that would contain my scene cards with an overview of my scene cards as the structure under my script and the ability to toggle between the two...then where do I sign on the dotted line?
If you could integrate this functionality into this software - and as I say, I'm not sure if you've done this - then I'm sold. In other words, you build with the cards, and worry about the script later.
Cheers,
C.

I need more info from you. I have looked for info re. Powerbuilder 11.5 here:
http://www.sybase.com/products/modelingdevelopment/powerbuilder
but I can not find any mention of Crystal Reports as it would apply to Crystal Reports being part of Powerbuilder 11.5. So, I need more explanation of this:
I'm trying to use the Crystal Reports ocx from Powerbuilder 11.5
Also, in the title of this post, you mention:
Crystal Reports RDC from Powerbuilder.
RDC and OCX are quite different technologies. It's one or the other. Thus please provide the following info:
1) Is the CR component you are using (be it an OCX or RDC) part of Powerbuilder? Or have you purchased a stand-alone version of CR and are using the component in Powerbuilder?
2) What component are you actually referencing?
3) What is the version of the Crystal Reports you are using?
Ludek

Problem to run the Crystal report inside from SAP B1 based on SQL views.

Hello,
I have a problem to run my Crystal report inside from SAP B1 which is based on SQL views.And the SQL views are stored in a separate database in SQL server.The error which i am getting is saying the the tablename does not exist.What i need to do in order to sort this problem.
Great if somebody can help me to sort out this so that i can run my report based on SQL views stored on separate database other than SAP databases inside from SAP B1.
Edited by: rozenagrawal on Apr 19, 2011 11:51 AM

Try using a SQL synonym in your company database for the views outside the company database. I don't know if SBO will let you get away with it, but its worth a shot.
If your company database is MyCompany and you have a view called MyView in Views database, assuming the view belongs to schema dbo, and you want the synonym to belong to dbo schema in your company database, run this:
Use MyCompany
go
create synonym dbo.OutsiderView for
Views.dbo.MyView
go
select * from OutsiderView
The select statement should return the contents of MyView in the Views database while you are connected to your MyCompany database.
For more info, see the Books Online for MSSQL on topic synonym.
You will need to change your CR options to include displaying synonyms along with tables, views, etc. You may also need to grant select to B1 users.
Edited by: Cindy Lange on Apr 21, 2011 4:00 PM

Problem with crystal reports get from All in One Best Practice package

Hi,
I tried to use Financial Statements crystal report download from All in One Best Practice package but encounter the below errors. I followed the guide in Manual Steps for Additional Datasource Creation to set up the additional data source. When i try to preview the report, I tried to set all the value to Null but the error message still appear. I believe this has something to do with the infoset but i not sure how to resolve this. Those report which connect to infoset doesnt seem to work for me.
Errors:
Failed to retrive data from database. (then i press OK)
database connector error: 'no item structure data' (then i press OK)
database connector error: 'RFC_Closed'
Please advice
Thank you

Hi Afzal,
I think you misunderstood. The crystal report i am talking about is the 23 crystal report template i get from All in One Best Practice package. All i need to do is follow the "Quick Guide to impletement SAP Best Practices for Business Intelligence V4.31" to make those template works. For those template that connect to Database type: SAP Table, Cluster or Function, i can make those work. The problem i facing now are those template (example: Financial Statements) that connect to Database type: SAP Info sets. The error i receive are stated in my first post.
Please advice

MENU NOT FOUND [ 66000-27] in Manage Crystal Report

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
Please note that earlier this menu used to open by which I used to add the reports but now for the last 4-5 days this menu is not opening.
Also would like to know in Account setup how to create ext table when the table already exist.
Regards,
Kawish

Hi,
I am still not able to find any solution for the error of ''MENU NOT FOUND [ 66000-27] in Manage Crystal Report''.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report 2008 of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

Run a report developed on Crystal Reports XI from java

Hi,
I am trying to run a report developed on Crystal reports XI from my Java Web Project.
I used the configuration specified in:
http://businessobjects.com/pdf/dev_zone/crxi_java_startup_guide.pdf
but I am getting the error:
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: There is no server specified.---- Error code:-2147217390 Error code name:serverNotFound"
when the code reaches the line: oReportClientDocument.open(reportName, 0)
I am using Eclipse as SDK and Tomcat as Webserver.
Thanks for the help.

can i use it In J2SE
if yes where i download it.also some link for reading

Calling crystal reports 11 from oracle forms 10g

Could you provide me step by step a solution on how I can call crystal reports 11 from oracle forms 10g application.

Hi,
Use web.show_document for calling the reports. Check out forms online help for syntax and example of web.show_document.
-Arun

How to Call Crystal Reports XI from Oracle Forms 6i

hi can any one ,Please provide me the steps to call Crystal Reports XI from Oracle Forms 6i
very urgent please
if any Doument,attachment please send to [email protected]
Thanks in advance
Regards
S.Thirumalai selvan

Hi All,
Can anyone send me the steps to call Crystal Reports XI from Oracle Forms 6i (client/server)?
Thanks in advance, Lidija
My email is: [email protected]

Calling Crystal Reports XI from Forms 10g

Any one succeed in calling Crystal Reports XI from Forms 10g,
or using Import Java Class in Forms 10g
to call Crystal Reports XI
or any other method to invoke crystal Reports XI from FORMS
share your Knowledge to OTN
please provide me the steps,documents to [email protected]
Message was edited by:
user501763

Hi,
Use web.show_document for calling the reports. Check out forms online help for syntax and example of web.show_document.
-Arun

Print Crystal Report directly from C# without using Report Viewer

Hello All,
I need to print a crystal report directly to the printer without using ReportViewer in C#. I've a CrystalReport2(belowCode) which requires a query (Select * from JobHeader where JobNumber='J012345') to display all the data. I'm stuck with database connection
and putting all the data to DataAdapter in C# (Below Code). I also have 8 subreports in my CrystalReport2. Can somebody please give me hand on this? I'm struggling with it. Thanks.
Regards
using CrystalDecisions.CrystalReports.Engine;
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Data.SqlClient;
namespace csharp_win_printtoprinter
/// <summary>
/// Summary description for Form1
/// </summary>
public class Form1 : System.Windows.Forms.Form
//CR Variables
ReportDocument crReportDocument;
private System.Windows.Forms.Button button1;
private System.Windows.Forms.PrintDialog printDialog1;
private System.Windows.Forms.Button button2;
private System.Drawing.Printing.PrintDocument printDocument1;
private CrystalDecisions.Windows.Forms.CrystalReportViewer crystalReportViewer1;
private CrystalReport1 CrystalReport11;
private Chart Chart1;
/// <summary>
/// Required designer variable
/// </summary>
private System.ComponentModel.Container components = null;
public Form1()
// Required for Windows Form Designer support
InitializeComponent();
// TODO: Add any constructor code after InitializeComponent call
/// <summary>
/// Clean up any resources being used
/// </summary>
protected override void Dispose( bool disposing )
if( disposing )
if (components != null)
components.Dispose();
base.Dispose( disposing );
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor
/// </summary>
private void InitializeComponent()
this.button1 = new System.Windows.Forms.Button();
this.printDialog1 = new System.Windows.Forms.PrintDialog();
this.button2 = new System.Windows.Forms.Button();
this.printDocument1 = new System.Drawing.Printing.PrintDocument();
this.crystalReportViewer1 = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
this.Chart1 = new csharp_win_printtoprinter.Chart();
this.CrystalReport11 = new csharp_win_printtoprinter.CrystalReport1();
this.SuspendLayout();
// button1
this.button1.Font = new System.Drawing.Font("Microsoft Sans Serif", 16F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
this.button1.Location = new System.Drawing.Point(32, 56);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(160, 104);
this.button1.TabIndex = 0;
this.button1.Text = "Print Report No Choose Printer";
this.button1.Click += new System.EventHandler(this.button1_Click);
// button2
this.button2.Font = new System.Drawing.Font("Microsoft Sans Serif", 15.75F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
this.button2.Location = new System.Drawing.Point(272, 56);
this.button2.Name = "button2";
this.button2.Size = new System.Drawing.Size(160, 104);
this.button2.TabIndex = 1;
this.button2.Text = "Choose Printer";
this.button2.Click += new System.EventHandler(this.button2_Click);
// crystalReportViewer1
this.crystalReportViewer1.ActiveViewIndex = 0;
this.crystalReportViewer1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
this.crystalReportViewer1.Cursor = System.Windows.Forms.Cursors.Default;
this.crystalReportViewer1.Location = new System.Drawing.Point(47, 188);
this.crystalReportViewer1.Name = "crystalReportViewer1";
this.crystalReportViewer1.ReportSource = this.CrystalReport11;
this.crystalReportViewer1.Size = new System.Drawing.Size(903, 296);
this.crystalReportViewer1.TabIndex = 2;
// Form1
this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
this.ClientSize = new System.Drawing.Size(1164, 505);
this.Controls.Add(this.crystalReportViewer1);
this.Controls.Add(this.button2);
this.Controls.Add(this.button1);
this.Name = "Form1";
this.Text = "Form1";
this.Load += new System.EventHandler(this.Form1_Load);
this.ResumeLayout(false);
#endregion
/// <summary>
/// The main entry point for the application
/// </summary>
[STAThread]
static void Main()
Application.Run(new Form1());
private void button1_Click(object sender, System.EventArgs e)
crReportDocument = new ReportDocument();
//Create an instance of a report
crReportDocument = new CrystalReport2();
//Use error handling in case an error occurs
try
//Set the printer name to print the report to. By default the sample
//report does not have a defult printer specified. This will tell the
//engine to use the specified printer to print the report. Print out
//a test page (from Printer properties) to get the correct value.
System.Drawing.Printing.PrintDocument printDocument = new System.Drawing.Printing.PrintDocument();
crReportDocument.PrintOptions.PrinterName = printDocument.PrinterSettings.PrinterName;
//Start the printing process. Provide details of the print job
//using the arguments.
crReportDocument.PrintToPrinter(0 ,true , 1, 1);
//Let the user know that the print job is completed
MessageBox.Show("Report finished printing!");
catch(Exception err)
MessageBox.Show(err.ToString(), "Unexpected exception");
private void Form1_Load(object sender, System.EventArgs e)
private void button2_Click(object sender, System.EventArgs e)
//Open the PrintDialog
this.printDialog1.Document = this.printDocument1;
DialogResult dr = this.printDialog1.ShowDialog();
if(dr == DialogResult.OK)
//Get the Copy times
int nCopy = this.printDocument1.PrinterSettings.Copies;
//Get the number of Start Page
int sPage = this.printDocument1.PrinterSettings.FromPage;
//Get the number of End Page
int ePage = this.printDocument1.PrinterSettings.ToPage;
string PrinterName = this.printDocument1.PrinterSettings.PrinterName;
crReportDocument = new ReportDocument();
//Create an instance of a report
crReportDocument = new Chart();
try
//Set the printer name to print the report to. By default the sample
//report does not have a defult printer specified. This will tell the
//engine to use the specified printer to print the report. Print out
//a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = PrinterName;
//Start the printing process. Provide details of the print job
//using the arguments.
crReportDocument.PrintToPrinter(nCopy, false, sPage, ePage);
//Let the user know that the print job is completed
MessageBox.Show("Report finished printing!");
catch(Exception err)
MessageBox.Show(err.ToString());

1. This is a VB.Net forum not a Visual C# forum. For Visual C# questions try this forum.
Visual C#
2. Crystal Reports are not supported by Microsoft. Therefore, unless somebody responding in the Visual C# forum has experience with whichever version of Crystal Reports you are using, you will probably not receive an answer in the Visual C# forum. SAP has
their own assistance for Crystal Reports using Visual Studio. You can try to find an appropriate forum to ask questions in at SAP in the below link.
SAP Community Network
La vida loca

Open a Crystal Report preview from an Add-on

Hi All,
I'm just trying to open a Crystal Report preview using a button from my add-on.
I want to use the SAP Crystal report, (the runtime integrated with SAP 8.8)
Basically I have my report created, so I need to create the object, pass the parameters and open an screen with my preview.
The main idea is open this Crystal report object when the addon starts and then just use that object.
I've found an example with this object SAPbobsCOM.ReportLayoutsService but this is for SAP 8.8.1 and I'm working with 8.8. I don't know if i can use SAPbobsCOM.ReportLayout.
I need a simple example please.
Thanks .

Hi,
Have you read through this: View Crystal Report from add-on ?
Thanks,
Gordon

View Crystal Report File from SDK

Hello All,
I want to View Crystal Report File (.rpt file) from SDK (using VB 6 )
I have already try following code on my Add On :
   Public Sub RunCrystalReport()
   Dim crlApp As New CRAXDDRT.Application
   Dim crlRep As CRAXDDRT.Report
   Set crlRep = crlApp.OpenReport("D:\ReportTest.rpt")
   Dim CRAX2 As CrystalActiveXReportViewerLib12Ctl.CrystalActiveXReportViewer
   Set CRAX2 = Form2.CRAX
   CRAX2.ReportSource = crlRep
   CRAX2.ViewReport
   End Sub
But, nothing happen
Could some one help one for this ?
Thanks a lot
Regards,
Arie
SDK Beginner

Amazing Sir !!...
I could run my report through B1 SDK right now...
Many thanks to you Sir..
Just one more thing, The Horisontal and Vertivcal Scroll control wasn't appear. Do I have to add scroll object or someting like that
Many thanks again to you Mr. Porcelli
Arie

Changing the Crystal Report dependency from 10.2 to 11.5 using config file

Hi,
We have an windows application in .net 2.0, which refers to Crystal Report 10.2 version. Now the dependency was being upgraded to 11.5. But we do not have the exact source code for the executable to change the dependency from 10.2 to 11.5.
I have installed the CR 11.5 to the testing machine and tried to open the appilcation. it failed saying CR 10.2 dlls were missing
Then I changed the .net config files to change the dependency assembly as follows
<runtime>
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" culture="neutral" />
         <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
      </assemblyBinding>
</runtime>
Now the application launched with out any issues. I thought the problem was sorted out.
But when I tried to generate the report, there comes the problem
During the report generation, I am getting the following error
Crystal Reports
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
OK
I do not want to install the 10.2 redistributable in teh machine also do not want to re-compile the sources changing the dependency
Is there any way to achieve this ?
Any help is much appreciated.
Thanks
Edited by: Balaji Narasimhan on Aug 3, 2009 5:28 PM

No way that I know of. I believe once you change the dependency, you will have to recompile the project. Installing CR 10.2, may get this to work, but the app will most likely use the 10.2 references. Let's see if anyone else has any ideas.
Ludek

Linking to a report on Crystal Report server from Adobe 6.0

Hello,
I am trying to link to a Cystal report on the Crystal report server. I just want to be able to connect directly to a report using Adobe Go-Live page. Right now... The only way I can find the address for the report is to get it from a Sharepoint site where I have it linked. Is there an easier way too find the web address of a cystal report on the Crystal report server?
Thanks,
Jason

I have checked the following directories and I haven't been able to see any errors related to my problem. I checked C:\Windows\system32\logfiles and C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\logging. However, if I schedule the report, it works just fine. I just can't run the report on demand without receving the "Stop Running Scripts" error.

Manager Crystal Reports - exemption from: HResult: 0xFFFFE48e

Similar Messages

Maybe you are looking for