Manager Heirarchy is not getting displayed in P&L Dashboard

Hi All,
I have implemented the P&L Dashboard for Financials. Suddenly, It is not displaying the Manager Heirarchy in the Manager Parameter in the P&L Dashboard.
Did anyone faced the same kind of problem, please throw some light.
Regards,
Chandana

Hi,
Thank you All.
Regards,
Shruti B.

Similar Messages

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Object form is not getting displayed for few users

Guys
I have successfully implemented approval and provisining flows for a new resource in OIM 9.1.X. This resource has an object and a process form.
It is working fine in production for few users. But for few users, the object form is not getting displayed to give the input while requesting this resource.
Please let me know what might be the issue.

Hi,
Could you please check whether you have added ALL_USERS group as a resource administrator group in resource object definition?
Add AL_USERS group as a resource administrators with the read access.
We had similar issue and managed to resolved.
Thanks,
Pallavi Chaudhari

Images from KM are not getting displayed in EP

Hi All,
I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
Location of the Images that I received from EP is mentioned below.
http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
Images are available in the location in the below mentioned path as .jpg files:-
http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
Difference in both is a DOCS folder missing in between........
Is this is the reason for the image not getting displayed?
Anything more has to be done in KM part to display these images?
May I know how to solve this issue??
Regards,
Athulya

Hi,
the right path look like this: /irj/go/km/docs/<path_to_document>.
You may have to check you URL generator service settings. Here:
Configuration - Content Management - Global Services - URL Generator Service(advanced section)
and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
Hope that will help.
best regards,
--epexpert

SAP Fields not getting displayed on the BDT screen

Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
Shiva

Hi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge

Condition tab in STO is not getting displayed

Hi,
While creating STO, the Condition tab in Line Item is not getting displayed.
Why it is not getting displayed? Where do I need to change the configuration?
Do I need to maintain any Pricing Procedure in MM?
Please guide.
Regards,
PK

Hi,
Check whether you have maintained Schema determination for respective document type and STO.
below mentioned is the navigation path to maintain the same.
> spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
Standard Pricing procedure for STO is RM2000.
Hope this is helpful..
Regards,
Vamshi

Pictogram in EP 7.4 are not getting displayed.

Hi Everyone
We have installed 7.4 and export the roles of portal 7.01 to 7.4 however the pictograms are not getting displayed.
We copied all the images manually from old path to the new one but still its broken using:
In the content administration >> web resource repository. In the tree find the folder "pictograms" right click on it and upload all of the pictograms
We followed the note 1753605 but that didnt help too.
I have checked this link:
Managing Pictograms in the Web Resource Repository - Portal - SAP Library
What is the cause of this error?
The system take the picture resource for show the pictograms that show the screen of ESS.
Thanks
Regards

Hi Samuli.
We are working with AIX.
The Path /usr/sap/<SID>/J<SYSNR>/
j2ee/cluster/apps/sap.com/pcui_gp~xssutils exist , however the directory Components/com.sap.xss.ser.xssmenu.vc.areagroup.VcXssMenuAreaGroup not exist and we have created the folders. and in thie new folder copied the pictograms , however the issue continue.
http://pbmdebddpd02.bancolombia.corp:50000/webdynpro/resources/sap.com/pcui_gp~xssutils/Components/com.sap.xss.ser.xssmenu.vc.areagroup.VcXssMenuAreaGroup/hcm_beneficios.gif
We have tested the url and this system genera the following error
http://hostname:port/webdynpro/resources/
Thanks
Regards

Potential & Development Forms are not getting displayed

Hi Gurus,
Here goes another problem which I am facing regarding Forms, I created Potential & Developemt forms in Talent Assessment in DEV-100(golden client) & copied it to DEV-300,via SCC1 (another client to which portal is linked), but still the forms are not updated in 300, though 1node & table V_T77TMC_P_V got updated in 300 after i copied the req.
The complete customization is done in the TR , including the manual transport of the Forms,still they are not getting displayed in 300, kindly help!!!!!!!! its urgent
Regards
Bharti Sood

Hi Bharti Sood,
It appears that all elements were not transported. Did you go through these customizing tasks in IMG > Talent Management and Talent Development > Talent Assessment:
- Transport Forms
- Transport Process Form Assignments
- Transport Scales
These elements do not get transported automatically.
Best regards,
Luke

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

'@' not getting displayed in the ALV report

Hello,
I am facing a strange issue in the ALV report display. A string starting with '@' is not getting displayed and says "default icon " on the report. and this is varying from system to system for the same user.
can anyone please help me in resolving the issue.
Thanks in advance.
Thanks and Regards,
Santhosh Guptha N.

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Default Value is not getting displayed in SUN ONE Ldap

Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil Kumar

Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi

Manager Heirarchy is not getting displayed in P&L Dashboard

Similar Messages

Maybe you are looking for