Manager PHP \ Проверить phpinfo() - возвращает 404

Помогите разобраться откуда ноги растут?
Создаю сайт\захожу в phpmanager\устанавливаю обработчик *.php через FastCGI\.../php-cgi.exe
Там же (в менеджере перехожу по ссылке Проверить phpinfo() - возвращает 404 (или ничего 500 для некоторых сайтов)
Manager PHP \ Проверить phpinfo() - возвращает 404
при этом:
1.php снаружи и локально отрабатывают. phpinfo() великолепно возвращает результат. для этого домена и всех остальных.
2.единственный сайт на этом сервере у которого проверка phpinfo() через панель phpmanager работает имеет IDN имя и для него прописан костыль в hosts
Manager PHP \ Проверить phpinfo() - возвращает 404
общая картинка
Manager PHP \ Проверить phpinfo() - возвращает 404
Вопросы ответы на которые не знаю где искать.
1. Почему возникает 404? 
2. почему ошибка после проверки phpinfo() через менеджер, сообщает что "Ошибка сервера в приложении DEFAULT WEB SITE" ожидалось имя сайта...?
3. судя по путям вида \yhyhyhy.php\ менеджер предварительно "хочет" положить файл php с проверочным кодом. Но или не попадает или не хватает прав? права для папки сайта (как и для всех уровнем выше - ДЛЯ ВСЕХ-ПОЛНЫЕ ПРАВА)
Через аудит, что смотреть не понял, но для пула этого сайта отказов не нашёл ... (может плохо искал)
помогите пожалуйста идеями с чего это может происходить??????

Hello Vasiliy Jukov,
Since this is english forum so please post your query in english only. People may not be able to understand your issue if they don't know your language.
Also you have to mention, which version of sharepoint you are using.
[Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

  • MBAM 2.5 integration broke my Primary Site Server - Managment Point http status code 404, not found

    I uninstalled MBAM 2.0 and installed MBAM 2.5. During 2.5 installation there was this one section to enter "Web service application pool domain account", where I entered domain admin account. I don´t know if that has any effect on this problem.
    Though, situation now is that my site is now out of order because of Management Point cannot connect to IIS or something like that.
    In status messages I see "MP Control Manager detected management point is not responding to HTTP requests.  The HTTP status code and text is 404, Not Found. Message ID 5436".
    In mpcontrol.log I see Call to HttpSendRequestSync failed for port 80 with status code 404, text: Not Found
    I have tried:
    Bindings checked, that http uses port 80
    MP component is uninstalled and reinstalled succsessfully
    Primary site server has restarted several times
    In IIS, Default Site -> SMS_MP->Basic Settings I did "Test Settings". With pass-through authentification it cannot Access the D:\SMS_CCM path, I changed to the domain admin, and it succseed. I have no idea, does this have something to do
    with it.

    I have experienced all the above problems also and they can be a pain to fix. I guess the moral of the story is (as Andy says) leave the ConfigMgr server alone. If you want an MBAM server then build an MBAM server.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    Hmm, I guess ConfMgr integration will not be the problem if your MP is using http(80) and MBAM will use https(443). If you then set spn to https, it will use 443 as-is, right? But other custom ports might be the problem?

  • Managed server now working: Error 404--Not Found

    Hi All,
    I am very new to this field and have just installed weblogic server 10.3.3.
    I have created an Admin server and a cluster of two Managed servers.
    Admin server is working and is opening in the UI console.
    When i am starting the Managed server, in the cmd console it is showing
    <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    but in UI it is showing as :
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    how to start Managed Weblogic server?
    TIA,
    Vishal

    Hi Sandeep,
    yes i m using http://host-name-of-Admin-Server:Port/console to check the status.
    i have clustered the two managed server.
    To start the Managed server i m using the command:
    startManagedWebLogic.cmd ms_1 http://localhost:7001
    and in the cmd console i am getting message as:
    <Mar 17, 2011 4:23:03 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogi
    c Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
    <Mar 17, 2011 4:23:04 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to STARTING>
    <Mar 17, 2011 4:23:04 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing se
    lf-tuning thread pool>
    <Mar 17, 2011 4:23:04 PM IST> <Notice> <LoggingService> <BEA-320400> <The log fi
    le C:\Admin\Middleware\user_projects\domains\base_domain\servers\ms_2\logs\ms_2.
    log will be rotated. Reopen the log file if tailing has stopped. This can happen
    on some platforms like Windows.>
    <Mar 17, 2011 4:23:04 PM IST> <Notice> <LoggingService> <BEA-320401> <The log fi
    le has been rotated to C:\Admin\Middleware\user_projects\domains\base_domain\ser
    vers\ms_2\logs\ms_2.log00001. Log messages will continue to be logged in C:\Admi
    n\Middleware\user_projects\domains\base_domain\servers\ms_2\logs\ms_2.log.>
    <Mar 17, 2011 4:23:04 PM IST> <Notice> <Log Management> <BEA-170019> <The server
    log file C:\Admin\Middleware\user_projects\domains\base_domain\servers\ms_2\log
    s\ms_2.log is opened. All server side log events will be written to this file.>
    <Mar 17, 2011 4:23:06 PM IST> <Notice> <Security> <BEA-090082> <Security initial
    izing using security realm myrealm.>
    <Mar 17, 2011 4:23:07 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to STANDBY>
    <Mar 17, 2011 4:23:07 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to STARTING>
    <Mar 17, 2011 4:23:09 PM IST> <Notice> <Log Management> <BEA-170027> <The Server
    has established connection with the Domain level Diagnostic Service successfull
    y.>
    <Mar 17, 2011 4:23:09 PM IST> <Notice> <Cluster> <BEA-000138> <Listening for ann
    ouncements from cluster Cluster_1 on 239.192.0.0:8050.>
    <Mar 17, 2011 4:23:09 PM IST> <Notice> <Cluster> <BEA-000133> <Waiting to synchr
    onize with other running members of Cluster_1.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Cluster> <BEA-000142> <Trying to downloa
    d cluster JNDI tree from server ms_1.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Cluster> <BEA-000164> <Synchronized clus
    ter JNDI tree from server ms_1.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to ADMIN>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to RESUMING>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Cluster> <BEA-000162> <Starting "async"
    replication service with remote cluster address "127.0.0.1">
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090171> <Loading the iden
    tity certificate and private key stored under the alias DemoIdentity from the jk
    s keystore file C:\Admin\Middleware\wlserver_10.3\server\lib\DemoIdentity.jks.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted
    certificates from the jks keystore file C:\Admin\Middleware\wlserver_10.3\server
    \lib\DemoTrust.jks.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted
    certificates from the jks keystore file C:\Admin\Middleware\jdk160_18\jre\lib\se
    curity\cacerts.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
    sted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O
    =T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
    e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
    ithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
    sted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O
    =T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificat
    e list raised a certificate parsing exception PKIX: Unsupported OID in the Algor
    ithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
    sted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
    loading of the trusted certificate list raised a certificate parsing exception
    PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
    sted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.
    \,LTD.,C=JP". The loading of the trusted certificate list raised a certificate p
    arsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.84
    0.113549.1.1.11.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the tru
    sted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
    of the trusted certificate list raised a certificate parsing exception PKIX: Un
    supported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default"
    is now listening on 10.174.4.84:7201 for protocols iiop, t3, CLUSTER-BROADCAST,
    ldap, snmp, http.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSe
    cure" is now listening on 10.174.4.84:7202 for protocols iiops, t3s, CLUSTER-BRO
    ADCAST-SECURE, ldaps, https.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1
    ]" is now listening on 127.0.0.1:7201 for protocols iiop, t3, CLUSTER-BROADCAST,
    ldap, snmp, http.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSe
    cure[1]" is now listening on 127.0.0.1:7202 for protocols iiops, t3s, CLUSTER-BR
    OADCAST-SECURE, ldaps, https.>
    <Mar 17, 2011 4:23:24 PM IST> <Notice> <WebLogicServer> <BEA-000332> <Started We
    bLogic Managed Server "ms_2" for domain "base_domain" running in Development Mod
    e>
    <Mar 17, 2011 4:23:26 PM IST> <Notice> <Cluster> <BEA-000102> <Joining cluster C
    luster_1 on 239.192.0.0:8050>
    <Mar 17, 2011 4:23:26 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to RUNNING>
    <Mar 17, 2011 4:23:26 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server sta
    rted in RUNNING mode>

  • PHP and Instantclient

    Hi,
    I want to use PHP and Oracle in my project. But i couldnt connect to oracle database using Instantclient.
    I did the following steps:
    -Create a subdirectory (C:\instantclient_10_2) and copy all files(libraries) from the zip file to C:\instantclient_10_2 directory
    -Edit php.ini and uncomment the OCI8 extension (enabled with "extension=php_oci8.dll" in php.ini), copy oci.dll to windows/system32
    -Edit the environment and add C:\instantclient_10_2 to PATH before any other Oracle directories
    -Copy tnsnames.ora to C:\instantclient_10_2 and set the user environment variable TNS_ADMIN to C:\instantclient_10_2
    -Restart IIS
    -To check the extension is configured, create a simple PHP script phpinfo.php
    <?php
    phpinfo();
    ?>
    -Load the script into a browser using a URL http://localhost/phpinfo.php
    I can see that OCI8 Support is enabled.
    My database name is TEST. when i run the following script, i just see "error". There is no detailed information about the error.
    <?php
    $connection = OCINLogon("system","manager","TEST");
    if($connection == false) {
         echo OCIError($connection);
         echo "error";
    $cursor = OCIParse($connection,"select sysdate from dual");
    OCIExecute($cursor);
    echo "<pre>";
    while(OCIFetchInto($cursor,$values)){
    echo $values[0];
    echo "";
    echo "</pre>";
    ?>
    I don't know what the problem is. How can i fix it?
    Thanks
    Note: I use php-5.2.3 and Oracle 9i. Oracle database is not in my local.

    I want to use PHP and Oracle in my project. But i
    couldnt connect to oracle database using
    Instantclient.Two things come to mind:
    I did the following steps:
    Edit php.ini and uncomment the OCI8 extension
    (enabled with "extension=php_oci8.dll" in php.ini),Can you make sure that this php_oci8.dll is compiled and linked against Oracle 10g and not Oracle 8i?
    My database name is TEST. when i run the following
    script, i just see "error". There is no detailed
    information about the error.
    <?php
    $connection = OCINLogon("system","manager","TEST");
    if($connection == false) {
         echo OCIError($connection);
         echo "error";Hmmm.
    A quick look at the PHP documentation on http://at2.php.net/manual/en/function.oci-error.php tells me that you should call oci_error() without an argument to get the error message for an oci_new_connect().
    Yours,
    Laurenz Albe

  • Connecting PHP 5.0.3 to Oracle 10g

    I have read dozens of documents and postings, but I cannot identify why my PHP scripts fail to connect to my db.
    When I run:
    $connection = OCI_Connect('db_user_name', 'pw', 'db');
    I consistently get:
    Warning: oci_connect() [function.oci-connect]: ociopen_server:
    I have: Oracle 10g, PHP 5.0.3, MS IIS 5.0
    1. phpinfo() executes without any errors.
    2. phpinfo() reports: the correct location of my php.ini, the correct location of my extensions, and the correct values of my enviroment variables (ORACLE_HOME and ORACLE_SID.)
    3. I have un-commented php_oci8.dll in php.ini (phpinfo reports it as enabled.)
    4. I have installed the Oracle 10g client on the web server and can connect to the db from the web server using SQLPlus.
    5. I have given IUSR_<machine name> on my web server "Full Control" priviledges in both the Oracle client directory and the PHP directory.
    I must still be missing something though.... Does anyone know what?
    Thanks for your help - Chris

    I had similar problem…
    From dos
    set path=%PATH%;”path to php”;’path to php\ext”
    D:\ My Documents>more tst.php
    <?php
    $user="SCOTT";
    $password="tiger";
    $dbname="test";
    $connection = ocilogon($user, $password, $dbname);
    $query = "SELECT EMPNO,ENAME,JOB FROM emp";
    $statement = oci_parse ($connection, $query);
    oci_execute ($statement);
    while ($row = oci_fetch_array ($statement, OCI_ASSOC)) {
    $id = $row['EMPNO'];
    $name = $row['ENAME'];
    $lob_field = $row['JOB'];
    echo $id.' '.$name.' '.$lob_field,"\n";
    oci_free_statement($statement);
    oci_close($connection);
    ?>
    D: \My Documents>php tst.php
    7369 SMITH CLERK
    7499 ALLEN SALESMAN
    7521 WARD SALESMAN
    7566 JONES MANAGER
    D:\My Documents>
    Now it should work
    Robert

  • Oracle Database 10.2.0.1 + Apache 2.0.59 + PHP 5.2.0

    Hi all.
    Where can i find the changePerm.sh script for Oracle Database 10.2.0.1?
    I get the error:
    Warning: ocilogon() [function.ocilogon]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that ORACLE_HOME is set and points to the right directory in /usr/local/apache/htdocs/oci8test.php on line 3
    Help me, please!
    Giovanni D'Ascola

    in Apache dir write short file: something.php
    <? phpinfo() ?>
    and access it via browser to see if there is oci defined.
    BTW. when you start apache you should se oracle (oci) variables to get access :-)

  • Assist plaese with PHP testing in Dreamweaver CS4

    Dear Friends,
    I’m completely new in Dreamweaver. I’ve just installed in my windowsXP PHP, MySQL and Apache. I’m trying to test PHP in Dreamweaver CS4. Here what I did but still could not see result in browser view.
    In site definition box,
    in local info:
    site name: PHP test
    local root folder: C:\wamp\www\
    HTTP address: http://localhost/PHPTest.php/
    In testing server:
                Server model: PHP My SQL
                Access: Local/Network
                Testing server folder: C:\Inetpub\wwwroot\
                URL Prefix: http://localhost/PHPTest.php/
    Inside the body script in code view I inserted the following:
    <?php
                echo "This is a PHP line";
                phpinfo();
    ?>
    When I try to see it in browser it shows: Internet Explorer cannot display the webpage
    Please tell me what I did wrong please.
    Thanks,
    Qartveli

    some clues to get you started:
    1. when developing on a local server, make sure that the testing server folder is equal to the local root folder -- means that it´s "C:\wamp\www\" in both cases, otherwise your local server will try to load the current page from the directory "C:\Inetpub\wwwroot" where this page physically doesn´t exist, and that´s why you´re getting the "cannot display the webpage" error message.
    2.
    URL Prefix: http://localhost/PHPTest.php/
    never specify a certain page name in here -- http://localhost/ is all you need for the URL prefix, and the name of the to-be-previewed page will be appended automatically when going to Preview mode..
    Cheers,
    Günter

  • How to use crystal report in php

    hello
    i need help for how to use crystal report for view the database report spacilly crosstab report i need it very much to complete my project ill be very thank full for help
    from farooq

    Hello sir
    i am sudeep and i need to deploy crstal reports in php
    i want to integrate it in sugar crm (open source project(
    can u plz tell me how to do it
    i have written this code
    <?php
    //echo phpinfo();exit;
    $ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
    $crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
    //$crapp = new COM("CrystalRuntime.Application.10");
    $reportToRun="C:\Report4.rpt";
    $creport = $crapp->OpenReport($reportToRun, 1);
    //reportToRun=full path to *.rpt file
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['User ID'] = $user;
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['Password'] = $pass;
    //fomatType = integer 22=xls, 31=pdf etc
    $creport->ExportOptions->FormatType = $formatType;
    //type 1 is to output to a file I think 2 is email
    $creport->ExportOptions->DestinationType = 1;
    //location = full path to report output file
    $creport->ExportOptions->DiskFileName = $location;
    $creport->DiscardSavedData();
    $creport->Export(False);
    ?>
    thanks in advance

  • How to use crystal report with php

    Hello every body
    can any body know how to use crystal report with php any helping material, code or tutorial for my problem ill be very thankful for helping me
    farooq

    Hello sir
    i am sudeep and i need to deploy crstal reports in php
    i want to integrate it in sugar crm (open source project(
    can u plz tell me how to do it
    i have written this code
    <?php
    //echo phpinfo();exit;
    $ObjectFactory= New COM("CrystalReports11.ObjectFactory.1");
    $crapp = $ObjectFactory->CreateObject("CrystalDesignRunTime.Application");
    //$crapp = new COM("CrystalRuntime.Application.10");
    $reportToRun="C:\Report4.rpt";
    $creport = $crapp->OpenReport($reportToRun, 1);
    //reportToRun=full path to *.rpt file
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['User ID'] = $user;
    $creport->Database->Tables->
    Item(1)->ConnectionProperties['Password'] = $pass;
    //fomatType = integer 22=xls, 31=pdf etc
    $creport->ExportOptions->FormatType = $formatType;
    //type 1 is to output to a file I think 2 is email
    $creport->ExportOptions->DestinationType = 1;
    //location = full path to report output file
    $creport->ExportOptions->DiskFileName = $location;
    $creport->DiscardSavedData();
    $creport->Export(False);
    ?>
    thanks in advance

  • Run PHP script

    Hello, everybody. I'm wondering if it's possible to run a HTML PHP script in a report region which type is HTML format? Something like:
    <?php
    echo phpinfo();
    ?>
    As I can imagine, this code could not be handled to PHP compiler although as I know, the ORACLE appication server has been compiled together with PHP 5. So is there any tricks to make this work, or does APEX have some plan to make similar things work in the later version?
    Thanks!

    I have a PHP application that opens up a template (MS
    Word) invoice file, inserts some information in the
    file (eg. today's date, customer name) and then saves
    it as a new Word file. My questions are as follows.
    1- How can I call this script from my Java
    application. Please note that I want to be able to
    pass parameters (eg. custome name read from a DB) from
    my Java app. to this script.You would have to call the PHP interpreter through Runtime.exec(), I believe. I haven't done anything with it, but you would have to build the command that would normally be typed on the command line as a string and pass it to Runtime.exec().
    2- Is it possible to print already saved MS Word
    documents from Java? If so, how?Try looking at the Jakarta POI project.
    3- Is it possible to do what my PHP script is doing in
    pure Java? I couldn't find a simple way of doing this,
    that's why I used PHP but I would like to do this in
    Java if I can.Same as 2.

  • HTTP 404 on ESB Test Web Service

    Hi,
    I cannot test my ESB service anymore cause, when i click on Test Web Service page of my Enterprise Manager, I receive an HTTP 404 error.
    I can't see any error log which colud help my understand the reason for this.
    Hoping it can help: this situation started few days ago, while i was trying to create an AQ JMS queue, modifying some configuration files like application.xml, jms.xml and data-sources.xml
    I'll appreciate any kind of help

    Hi,
    I've figured out the cause for previous quoted problem:
    in default-web-site.xml configuration file of /j2ee/home I've found a propery ohs-routing set to false.
    In forum's thread "Use HTTPS to access webservice on standalone OC4J" that property wasn't set, so I removed it and magically now it works!
    My question now is, which event caused such a change in default-web-site.xml file? How can I prevent or even controll it?
    Thank you,
    Lisa

  • Apache enable php

    Every time I upgrade my iMac with a new MacOS, I restart at the stone age.
    What a boring system.
    Every time my iMac loses the hostname, and apache on local files is unable to manage php files.
    What a boring system.
    In this community, if I select the Mountain Lion folder and then I search for apache anable php, the search engine show me articles related to 10.5, 5 years old, totally useless.
    What a boring system.
    Now, I have to solve a css problem in a web page and cannot even start to see the page locally, since my iMac is totally unable to do what I expect as assumption, seen that it worked for years.
    This system is really, really boring.
    Does someone give me a link to a useful page on how to configure these boring things?
    Thank you!

    Try Google:
    https://www.google.com/webhp?client=safari#hl=en&client=safari&sclient=psy-ab&q= mac+mountain+lion+configure+apache+php&oq=mac+mountain+lion+configure+apache+php
    That was so easy it's boring.

  • Httpd fail to start after Zend Core installation

    Hi!
    I need Zend, so I installed it using this instruction.
    The problem is that httpd daemon faild to start after that.
    Here is my /etc/httpd/conf/httpd.conf:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
    # with ServerRoot set to "/etc/httpd" will be interpreted by the
    # server as "/etc/httpd//var/log/httpd/foo_log".
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    #FastCGI module
    LoadModule fcgid_module lib/apache/mod_fcgid.so
    AddHandler fcgid-script .php
    FCGIWrapper /usr/local/bin/php-cgi .php
    SocketPath /tmp/fcgidsock
    SharememPath /tmp/fcgidshm
    #php module
    #LoadModule php5_module modules/libphp5.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/srv/http"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/srv/http">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock /var/run/httpd/cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    ErrorDocument 400 /error.php?400
    ErrorDocument 401 /error.php?401
    ErrorDocument 403 /error.php?403
    ErrorDocument 404 /error.php?404
    ErrorDocument 500 /error.php?500
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    #php include
    Include conf/extra/php5_module.conf
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    #<VirtualHost *:80>
    #ServerName oldforum
    #DocumentRoot /srv/oldforum
    #</VirtualHost>
    ### Start of Zend Core
    ### PHP Apache Module
    # LoadModule php5_module /usr/local/Zend/Core/modules/apache22/libphp5.so
    ### PHP FastCGI
    LoadModule zend_enabler_module /usr/local/Zend/Core/modules/apache22/zend_enabler.so
    FastCgiConfig /usr/local/Zend/Core/etc/zend_enabler.conf
    AddHandler zend-enabler-script .php
    ### PHP CGI
    # Action application/x-httpd-php /zend-cgi/php
    # ScriptAlias /zend-cgi/ /usr/local/Zend/Core/cgi-bin/
    AddType application/x-httpd-php .php
    DirectoryIndex index.php
    ExtendedStatus on
    Alias /ZendCore /usr/local/Zend/Core/GUI
    <Location /ZendCore>
    Options FollowSymLinks
    Order deny,allow
    Allow from all
    </Location>
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost
    Allow from 127.0.0.1
    </Location>
    <Location /server-info>
    SetHandler server-info
    Order deny,allow
    Deny from all
    Allow from localhost
    Allow from 127.0.0.1
    </Location>
    ### End of Zend Core
    Here is my /etc/php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; Under Windows, the compile-time path is the Windows directory. The
    ; path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_globals = Off [Security, Performance]
    ; Global variables are no longer registered for input data (POST, GET, cookies,
    ; environment and other server variables). Instead of using $foo, you must use
    ; you can use $_REQUEST["foo"] (includes any variable that arrives through the
    ; request, namely, POST, GET and cookie variables), or use one of the specific
    ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
    ; on where the input originates. Also, you can look at the
    ; import_request_variables() function.
    ; Note that register_globals is going to be depracated (i.e., turned off by
    ; default) in the next version of PHP, because it often leads to security bugs.
    ; Read http://php.net/manual/en/security.registerglobals.php for further
    ; information.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP surpresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will called (with the undefind class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instanciated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ;open_basedir =
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <font color="??????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = On
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings
    ; E_ERROR - fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatability of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; sourcelines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = On
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/php/includes"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ;extension_dir = "./"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = On
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; auto_detect_line_endings = Off
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Win32 only.
    SMTP = localhost
    smtp_port = 25
    ; For Win32 only.
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in secondes) for connect timeout. -1 means no limimt
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLI]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatability mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [dbx]
    ; returned column names can be converted for compatibility reasons
    ; possible values for dbx.colnames_case are
    ; "unchanged" (default, if not set)
    ; "lowercase"
    ; "uppercase"
    ; the recommended default is either upper- or lowercase, but
    ; unchanged is currently set for backwards compatibility
    dbx.colnames_case = "lowercase"
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ;session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning seperately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatability mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. Default = 25
    ;mssql.max_procs = 25
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [Ingres II]
    ; Allow or prevent persistent links.
    ingres.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ingres.max_persistent = -1
    ; Maximum number of links, including persistents. -1 means no limit.
    ingres.max_links = -1
    ; Default database (format: [node_id::]dbname[/srv_class]).
    ingres.default_database =
    ; Default user.
    ingres.default_user =
    ; Default password.
    ingres.default_password =
    [Verisign Payflow Pro]
    ; Default Payflow Pro server.
    pfpro.defaulthost = "test-payflow.verisign.com"
    ; Default port to connect to.
    pfpro.defaultport = 443
    ; Default timeout in seconds.
    pfpro.defaulttimeout = 30
    ; Default proxy IP address (if required).
    ;pfpro.proxyaddress =
    ; Default proxy port.
    ;pfpro.proxyport =
    ; Default proxy logon.
    ;pfpro.proxylogon =
    ; Default proxy password.
    ;pfpro.proxypassword =
    [Sockets]
    ; Use the system read() function instead of the php_read() wrapper.
    sockets.use_system_read = On
    [com]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constat registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation accoding to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    ;fbsql.batchSize = 1000
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    zend_core_dir="/usr/local/Zend/Core"
    zend_gui_password=63a9f0ea7bb98050796b649e85481845
    zend_core.default_gui_language=en
    zend_gui.ini_modifier_path="/usr/local/Zend/Core"
    extension_dir="/usr/local/Zend/Core/lib/php/20060613"
    include_path=".:/usr/local/Zend/ZendFramework/library:/usr/local/Zend/Core/share/pear"
    zend_extension="/usr/local/Zend/Core/lib/zend/ZendExtensionManager.so"
    zend_extension_manager.optimizer="/usr/local/Zend/Core/lib/zend/optimizer"
    zend_extension_manager.debug_server="/usr/local/Zend/Core/lib/zend/debugger"
    zend_ini_file=/usr/local/Zend/Core/etc/zend.ini
    [zend]
    extension=apc.so
    extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=db2.so
    ;extension=exif.so
    ;extension=ftp.so
    extension=gd.so
    ;extension=gettext.so
    ;extension=gmp.so
    ;extension=ibm_db2.so
    extension=iconv.so
    extension=imap.so
    ;extension=ldap.so
    extension=mbstring.so
    ;extension=mcrypt.so
    ;extension=memcache.so
    ;extension=mhash.so
    ;extension=ming.so
    extension=mysql.so
    extension=mysqli.so
    ;extension=oci8.so
    ;extension=pcntl.so
    extension=pdo.so
    ;extension=pdo_ibm.so
    extension=pdo_mysql.so
    ;extension=pdo_oci.so
    extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    extension=pgsql.so
    ;extension=posix.so
    ;extension=shmop.so
    extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=tokenizer.so
    ;extension=xmlreader.so
    ;extension=xmlrpc.so
    extension=xmlwriter.so
    ;extension=xsl.so
    ;extension=zip.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=db2.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gettext.so
    ;extension=gmp.so
    ;extension=ibm_db2.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=memcache.so
    ;extension=mhash.so
    ;extension=ming.so
    ;extension=oci8.so
    ;extension=pcntl.so
    ;extension=pdo_ibm.so
    ;extension=pdo_oci.so
    ;extension=pdo_sqlite.so
    ;extension=posix.so
    ;extension=shmop.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=tokenizer.so
    ;extension=xmlreader.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    Please, tell me what's the reason and what I should do.
    Thanks in advance.

    Hi Garyalbert,
    Welcome to Lenovo Community!
    I’m sorry to hear that you are facing the issue with No POST on ThinkPad X240.
    To resolve the issue I suggest you to perform power drain, to go with power drain option please removing power adapter and battery. Hold the power button for 30 second and then connect only power adapter and try to switch on the system. If the system is switching ON then connect battery and check it once.
    Hope this helps! 
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why am I getting ErrorCode: OperationNotSupported _Code: 204 When I am trying to get campaigns from sandbox account

    Hi All,
          Seasonal Greetings. 
          I am new one to bing ads . I am trying to get Campaigns from my sandbox account. The following is my code.                    
     <?php
    // To ensure that a cached WSDL is not being used,
    // disable WSDL caching.
    ini_set("soap.wsdl_cache_enabled", "0");
    try
        //$accountId = <youraccountid>; // Application-specific value.
         $accountId = "8951263";
        // Use either the sandbox or the production URI.
        // This example is for the sandbox URI.
        $URI =
            "https://api.sandbox.bingads.microsoft.com/Api/Advertiser/v8/";
        // The following commented-out line contains the production URI.
        //$URI = "https://adcenterapi.microsoft.com/api/advertiser/v8/";
        // The API namespace.
        $xmlns = "https://adcenter.microsoft.com/v8";
        // The proxy for the Campaign Management Web service.
        $campaignProxy = 
            $URI . "CampaignManagement/CampaignManagementService.svc?wsdl";
        // The name of the service operation that will be called.
        $action = "GetCampaignsByAccountId";
        // The user name, password, and developer token are
        // expected to be passed in as command-line
        // arguments.
        // $argv[0] is the PHP file name.
        // $argv[1] is the user name.
        // $argv[2] is the password.
        // $argv[3] is the developer token.
        if ($argc !=4)
            printf("Usage:\n");
            printf(
              "php file.php username password devtoken\n");
            exit(0);
        $username = $argv[1];
        $password = $argv[2];
        $developerToken = $argv[3];
        $applicationToken = "";
        // Create the SOAP headers.
        $headerApplicationToken = 
            new SoapHeader
                $xmlns,
                'ApplicationToken',
                $applicationToken,
                false
        $headerDeveloperToken = 
            new SoapHeader
                $xmlns,
                'DeveloperToken',
                $developerToken,
                false
        $headerUserName = 
            new SoapHeader
                $xmlns,
                'UserName',
                $username,
                false
        $headerPassword = 
            new SoapHeader
                $xmlns,
                'Password',
                $password,
                false
        $headerCustomerAccountId = 
            new SoapHeader
                $xmlns,
                'CustomerAccountId',
                $accountId,
                false
        // Create the SOAP input header array.
        $inputHeaders = array
            $headerApplicationToken,
            $headerDeveloperToken,
            $headerUserName,
            $headerPassword,
            $headerCustomerAccountId
        // Create the SOAP client.
        $opts = array('trace' => true);
        $client = new SOAPClient($campaignProxy, $opts); 
        // Specify the parameters for the SOAP call.
        $params = array
            'AccountId' => $accountId,
        // Execute the SOAP call.
        $result = $client->__soapCall
            $action,
            array( $action.'Request' => $params ),
            null,
            $inputHeaders,
            $outputHeaders
         print "Successful $action call.\n";
         print "TrackingId output from response header: "
              . $outputHeaders['TrackingId']
              . ".\n";
         // Insert a blank line to separate the text that follows.
         print "\n";
        // Retrieve the campaigns.
        if (isset(
            $result->Campaigns
            if (is_array($result->Campaigns->Campaign))
                // An array of campaigns has been returned.
                $obj = $result->Campaigns->Campaign;
            else
                // A single campaign has been returned.
                $obj = $result->Campaigns;
            // Display the campaigns.
            foreach ($obj as $campaign)
                print "Name          : " . $campaign->Name . "\n";
                print "Description   : " . $campaign->Description . "\n";
                print "MonthlyBudget : " . $campaign->MonthlyBudget . "\n";
                print "BudgetType    : " . $campaign->BudgetType . "\n";
                print "\n";
    catch (Exception $e)
        print "$action failed.\n";
        if (isset($e->detail->ApiFaultDetail))
          print "ApiFaultDetail exception encountered\n";
          print "Tracking ID: " . 
              $e->detail->ApiFaultDetail->TrackingId . "\n";
          // Process any operation errors.
          if (isset(
              $e->detail->ApiFaultDetail->OperationErrors->OperationError
              if (is_array(
                  $e->detail->ApiFaultDetail->OperationErrors->OperationError
                  // An array of operation errors has been returned.
                  $obj = $e->detail->ApiFaultDetail->OperationErrors->OperationError;
              else
                  // A single operation error has been returned.
                  $obj = $e->detail->ApiFaultDetail->OperationErrors;
              foreach ($obj as $operationError)
                  print "Operation error encountered:\n";
                  print "\tMessage: ". $operationError->Message . "\n"; 
                  print "\tDetails: ". $operationError->Details . "\n"; 
                  print "\tErrorCode: ". $operationError->ErrorCode . "\n"; 
                  print "\tCode: ". $operationError->Code . "\n"; 
          // Process any batch errors.
          if (isset(
              $e->detail->ApiFaultDetail->BatchErrors->BatchError
              if (is_array(
                  $e->detail->ApiFaultDetail->BatchErrors->BatchError
                  // An array of batch errors has been returned.
                  $obj = $e->detail->ApiFaultDetail->BatchErrors->BatchError;
              else
                  // A single batch error has been returned.
                  $obj = $e->detail->ApiFaultDetail->BatchErrors;
              foreach ($obj as $batchError)
                  print "Batch error encountered for array index " . $batchError->Index . ".\n";
                  print "\tMessage: ". $batchError->Message . "\n"; 
                  print "\tDetails: ". $batchError->Details . "\n"; 
                  print "\tErrorCode: ". $batchError->ErrorCode . "\n"; 
                  print "\tCode: ". $batchError->Code . "\n"; 
        if (isset($e->detail->AdApiFaultDetail))
          print "AdApiFaultDetail exception encountered\n";
          print "Tracking ID: " . 
              $e->detail->AdApiFaultDetail->TrackingId . "\n";
          // Process any operation errors.
          if (isset(
              $e->detail->AdApiFaultDetail->Errors
              if (is_array(
                  $e->detail->AdApiFaultDetail->Errors
                  // An array of errors has been returned.
                  $obj = $e->detail->AdApiFaultDetail->Errors;
              else
                  // A single error has been returned.
                  $obj = $e->detail->AdApiFaultDetail->Errors;
              foreach ($obj as $Error)
                  print "Error encountered:\n";
                  print "\tMessage: ". $Error->Message . "\n"; 
                  print "\tDetail: ". $Error->Detail . "\n"; 
                  print "\tErrorCode: ". $Error->ErrorCode . "\n"; 
                  print "\tCode: ". $Error->Code . "\n"; 
        // Display the fault code and the fault string.
        print $e->faultcode . " " . $e->faultstring . ".\n";
        // Output the last request.
        print "Last SOAP request:\n";
        print $client->__getLastRequest() . "\n";
    ?>
    http://msdn.microsoft.com/en-us/library/bing-ads-campaign-management-php-samples-get-campaigns(v=msads.80).aspx
    But I am getting responce 
    GetCampaignsByAccountId failed.
    ApiFaultDetail exception encountered
    Tracking ID: efa654c5-b112-4e96-8c3d-79bac7e70112
    Operation error encountered:
    Message: This operation is not supported.
    Details: 
    ErrorCode: OperationNotSupported
    Code: 204
    s:Server Invalid client data. Check the SOAP fault details for more information.
    Last SOAP request:
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://adcenter.microsoft.com/v8"><SOAP-ENV:Header><ns1:ApplicationToken></ns1:ApplicationToken><ns1:DeveloperToken>BBD37VB98</ns1:DeveloperToken><ns1:UserName>-XXXXXX-</ns1:UserName><ns1:Password>-XXXXX-</ns1:Password><ns1:CustomerAccountId>8951263</ns1:CustomerAccountId></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>8951263</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    Please Help me to get out of this .  
    Thank you in advance.
    Deepa Varma 

    Hello Nalin,
              Thank you for the reply . Now I am using
    $campaignProxy ="https://api.sandbox.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?wsdl" ;
    // The API namespace.
        $xmlns = "https://adcenter.microsoft.com/v9";
        $xmlns = "https://bingads.microsoft.com/AdIntelligence/v9";
    But I am getting 
    GetCampaignsByAccountId failed.
    AdApiFaultDetail exception encountered
    Tracking ID: ca31d743-7b7b-4479-8082-44997d60d549
    Error encountered:
    Message: Authentication failed. Either supplied credentials are invalid or the account is inactive
    Detail: 
    ErrorCode: InvalidCredentials
    Code: 105
    s:Server Invalid client data. Check the SOAP fault details for more information.
    Last SOAP request:
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9" xmlns:ns2="https://adcenter.microsoft.com/v8"><SOAP-ENV:Header><ns2:ApplicationToken></ns2:ApplicationToken><ns2:DeveloperToken>BBD37VB98</ns2:DeveloperToken><ns2:UserName>vbridgellp</ns2:UserName><ns2:Password>XXXX</ns2:Password><ns2:CustomerAccountId>8951263</ns2:CustomerAccountId></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>8951263</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    I am able to login to sand box UI and see my campaigns. What may be reason for the error ? 
    Thank you in Advance. 
    Deepa Varma

  • How do I stop an Open Proxy

    I have a G5 server running OS X 10.4.8 hosting a couple of web sites.
    From evidence in my log files I appear to be running a “partial” Open Proxy and would like to know how to stop this.
    This is my setup:
    * Enable Proxy in unchecked (although Control Access to Proxy is checked). Note, until about 3 months ago this was checked by accident.
    * All sites have Performance Cache unchecked.
    * I have ports 80 (http), 443 (https) and 8080 (https) open (I need 8080 for a second digital certificate).
    * I'm running PHP and MySQL.
    I have tested for open proxy (via http://www.euirc.net/en/proxycheck.php) and it reports I’m not running a proxy.
    HOWEVER, if I check my web logs I can see successful accesses (200) from external IP addresses:
    xxx.xxx.xxx.xxx - - [03/Dec/2006:10:26:45 +0000] "GET http://www.yahoo.com/ HTTP/1.0" 200 90 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)"
    Fortunately, other accesses appear to get rejected with 404:
    xxx.xxx.xxx.xxx - - [03/Dec/2006:05:00:05 +0000] "GET http://www.peopower.com/server/Headers.shtml HTTP/1.1" 404 426 "http://www.yahoo.com" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7.8) Gecko/20050511"
    xxx.xxx.xxx.xxx - - [03/Dec/2006:10:49:50 +0000] "POST http://toscontrol.com/CheckProxy.php HTTP/1.0" 404 406 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)"
    xxx.xxx.xxx.xxx - - [03/Dec/2006:10:51:33 +0000] "GET http://www.hide-my-ip.com/xprox.cgi?ip=74.52.29.146 HTTP/1.1" 404 417 "-" "Mozilla/5.0 (745222)"
    Plus, I’ve done a Google search on my IP address and it appears in various proxy forums !
    These are my questions:
    * Should I be worried (I think yes as I’m concerned they my hide behind my IP address, which could then become black-listed).
    * How do I close my open proxy ?
    * How can I be certain that I'm not running an open proxy ?
    Thanks in advance,
    john
    G5 Server   Mac OS X (10.4.8)   PHP, MySQL

    Thanks Roger for the reply.
    This is a real puzzle ! I wonder if these pages are still sitting in my cache left over from when I was (unintentionally) running an open proxy.
    I’ve just done a quick analysis of last night’s logs and, yet again, I have entries which reference off to other sites and return 200. For example, www.yahoo.com, www.sun.com, www.qq.com. plus some explicit IP address with port mumbers. There’s about 200 in total from about 20 IP address. From the timings they look like robots. Example,
    xxx.xxx.xxx.xxx - - [03/Dec/2006:20:29:02 +0000] "GET http://www.qq.com/ HTTP/1.0" 200 90 "-" "-"
    xxx.xxx.xxx.xxx - - [04/Dec/2006:16:50:33 +0000] "HEAD http://www.sun.com/ HTTP/1.1" 200 0 "-" "Mozilla/5.0 ( Windows; U; Windows 98; DigiExt )"
    xxx.xxx.xxx.xxx - - [04/Dec/2006:17:25:41 +0000] "GET http://xxx.xxx.xxx.xxx:46449/ HTTP/1.0" 200 90 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)"
    But equally, there are far more (thousands) where 404 has been returned !
    xxx.xxx.xxx.xxx - - [04/Dec/2006:19:34:16 +0000] "POST http://www.carhiredeal.com/hitTestAdv.aspx HTTP/1.1" 404 424 "http://www.valuecarrentals.com/" "-"
    xxx.xxx.xxx.xxx - - [04/Dec/2006:19:34:30 +0000] "POST http://ipexposed.com/pr/pst.php HTTP/1.1" 404 413 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;)"
    xxx.xxx.xxx.xxx - - [04/Dec/2006:19:38:43 +0000] "GET http://clickingagent.com/proxycheck.php?ip=xxx.xxx.xxx.xxx&port=80&loc= HTTP/1.0" 404 409 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)"
    My current thinking is to stop the IP addresses at the firewall, but this doesn't address the real issue as to why is 200 being returned for some sites ?
    john

Maybe you are looking for

  • Not able to install CS6 Design and Web upgrade

    I bought an upgrade from CS3 Master Collection (which qualifies for the upgrade) to CS6 Design and Web premium. Upon installation it asks me for the CS3 serial number. I put the CS3 serial number and it gives me an error. Do I need to deactivate it C

  • Accented characters showing up as ? in JRE1.3 but ok in 1.2

    I'm implementing a database web interface product that utilizes JSPs (on SunOS 5.7). The problem is in the search form. When using accented characters (French language), the JSP calls on URLEncode, but all accented characters show up as '?'. However,

  • Os x 10.8.5 is better or os x mavericks ?

    hi which softwear is better ? some one told me os x mavericks is not good .

  • How to recreate a preference for text schema index

    I have 10.2.0.3 database. I have a schema that has text schema indexes. I need to load the data to another user. Here is my steps: 1. create a new user dev. 2. expdp user prod 3. impdp prod to dev META_DATA_ONLY 4. drop schema indexex, otherwise, the

  • Vision 8.2.1 and standalone applications

    I recently upgraded to Vision 8.2.1 (still running LabVIEW 8.2), and subsequently modified a vision acquisition VI to take advantage of some of the new IMAQdx calls.  The modified VI works fine, and the executable built from it works fine.  However,