Manager says he needs an SAP Environmental, Health, and Safety Person

What are the buzz words for this module?
It is completely new to me and I don't know where to begin
annak

Hi Anna,
SAP EH&S consists basically of 5 different modules:
- Product Safety
- Hazardous Substance Management
- Dangerous Goods Management
- Waste Management
- Occupational Health & Industrial Hygiene and Safety
A good starting point should be the SAP Online Documentation: <a href="http://help.sap.com/saphelp_47x200/helpdata/en/a5/3adda043be11d188fe0000e8322f96/frameset.htm">http://help.sap.com/saphelp_47x200/helpdata/en/a5/3adda043be11d188fe0000e8322f96/frameset.htm</a>
All modules are using a specification database where you can store data based on classes and characteristics in SAP's class system as well as compositions, identifier, material assignments, usages, ...
Based on the data you can do calculations with rulesets. For example based on a certain environmental regulation that tells you: <i>if your product contains xx% of this substance you have to label it as toxic</i>. Then you can generate Material Safety Data Sheets for your products or other relevant documents (depending on the module) and ship them to your customers.
Hope it helps,
Andreas

Similar Messages

Environmental Health and Safety (EHS-Module)

Hi Experts,
Can any one suggests Books for Environmental Health and Safety (EHS-Module)

KC,
You did answer your own question here. Yes, you probably have to build out your health and safety solution. You would have to look at the individual technical requirements for each IDES instance to understand what might be possible.
Regards,
Bob

EHS-ENVIRONMENTAL HEALTH AND SAFETY

PLEASE GIVE INFORMATION WHICH REQUIRES FOR AN ABAPER REGARDING TO EHS -MODULE.

Hi
See the links
http://www.sap.com/solutions/business-suite/plm/featuresfunctions/ehs.epx
sub modules
SAP EH&S Product safety & Dangerous Goods
SAP EH&S Waste Management
SAP EH&S Industrial Hygiene
SAP EH&S Hazardous Substances Management
SAP EH&S Incident Management
SAP EH&S Occupational Health & safety
SAP EH&S Emissions Management
SAP EH&S Recipe Management
SAP CRM/QM Audit Management
Regards
Anji

Extension manager says I need a newer version of photoshop when I already have the most current version cc2014

extension manager says I need a newer version of photoshop when I already have the most current version cc2014. Any thoughts on this?

lance have you found an answer to your question?

HT202358 can't open my iPhoto it says i need the upgrader did that and it still won't open.

can't open my iPhoto it says i need the upgrader did that and it still won't open.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Report related to Health and Safety in SAP

Dear All,
Can you please help me from where i can found the reports related to Health and Safety Reports like
1. No. of Near-Miss Incidents
2. No. of First Aid Cases
3. N. of Medical Cases
4. No. of Lost time Incident
5. No. of Fatal Injuries
6. No. of fire Incident major, Minor
7. No. of Fire drill conducted
8. No. of people trained
9. Man-Hours worked at project
10. No. of PIT drill conducted
11. No. of Trip Drill Conducted
Also help me should i develop these reports or can be found in standard , we are using ECC 6.0
Regards
Vivek

Hello Vivek,
The standard reports for the Incident / Accident Managment are:
S_SH8_84000003 - Display 1000-Employee Quota
S_SH8_84000004 - Display 1,000,000-Hour Quota
S_SH8_84000005 - List Reportable Accidents Without Accident Report
S_SH8_84000006 - Check and Correct Absences in Incident/Accident Log
You can find some of the reprots from you list to be available here.
Otherwise you may require to develop reports.
Request you to go through the topic: Incident/Accident Management Reports in SAP Help. You will find more information about Incident / Accident reports there.
Regards,
Niraj

I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this since yesterday. Is this right??

I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this task since yesterday. Is this right??

No. Quit and try again. If that fails again,
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wnt turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there

i was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wont turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there

Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device

Screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
 Good Luck!
DALE

How can I sync my Iph5 to my MacBook. The MacBook is currently on os x 10.5 and to sync itunes and backup my new phone I am getting a message saying i need 10.6 or later and it won't download.

.How can I sync my Iph5 to my MacBook to back up on itunes. The MacBook is currently on os x 10.5 and to sync itunes and backup my new phone I am getting a message saying i need 10.6 or later and it won't download.
catherine187

As stated in the System Requirements, an iPhone 5 runs iOS 6. In order to sync to a computer you must have OSX 10.6.8 or later and iTunes 11 on the computer. If you can upgrade your MacBook to OSX 10.6.8 (Snow Leopard) you can purchase this version of OSX in the Apple Store. Most intel macs can run at least OSX 10.6.8. If your MacBook is a power pc Mac you are at the end of the supported operating systems and will not be able to upgrade the OSX or sync your iPhone 5.

My phone turns off saying it needed to be plugged in and i plug it in and it says it has 27% and i already tried resetting it! Are they able to help me or am i out of luck ? I already got a different iphone because my very first one didnt work and

My phone turns off saying it needed to be plugged in and i plug it in and it says it has 27% and i already tried resetting it! Are they able to help me or am i out of luck ? I already got a different iphone because my very first one didnt work and the second one is not working either.

When you erased the disk did you select Mac OS Extended Journaled as the format option?

I just pruchased a audio book and now I am trying to get it to itunes. It keeps saying I need a audible account name and password? My computer is authorized but I dont know my audibe account info? could you help me

I just purchased a adio book and now I am trying to get it to itunes. It keeps saying i need a audible account username and password? I put in my itunes info but that is not it? the book is in "public": on my computer could you help me

Hello Timmy790
Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next?

BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition

Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others.

HT201401 im trying to reset my iphone 4s and it says it needs the origional apple id and password. i do not have this because i bought the phone from someone who bought it from someone is there a way to get around this issue?

im trying to reset a iphone 4s that i bought from someone. it is in the middle of the restoring process and it says it needs the origional apple id and password. i dont have this and the person i bought it from got it from someone else so there is no way for me to get that info. is there any way around this issue?

No. There is no way around this. Without the credentials used to lock it, you can't use it at all. Return it to the person you got it from and get your money back. Failing that, turn it over to the police. There is a high likelyhood that it's stolen.

MacBook Pro Health and safety issue: Potential Burn during normal use

Hi,
I am not a complainer. I worked for Apple of 6+ years and have had a top of the line Apple Notebook since Apple created the concept of the laptop notebook.
I recently experienced a 3rd degree burn using my MacBook Pro that I think Apple needs to warn folks about:
MacBook Pro 17"
Machine Model: MacBookPro1,2
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 2.16 GHz
L2 Cache (shared): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B00
Serial Number: ()
SMC Version: 1.5f10
Sudden Motion Sensor:
State: Enabled
I had my laptop on my lap. I was wearing shorts. It noticed that it was warm on my leg where the left side of the MacBook Pro was touching my leg, but it didn't create a reflex pain response.
Upon completing my session, when I closed the machine and put it away, I noticed a 1 inch x .75 inch blister on my leg where it had been touching the MacBook/Pro; and it has turn out to be a significant burn.
I checked all the documentaiton that came with my MacBook Pro and there was no warning about the potential of this situation.
I recommend that Apple let owners know, perhaps through an email or a popup when they visit the Apple site. Lastly, when I encountered this issue, I wasn't running any high performance, compute bound applications. It was email. So, I have to believe that it is possible to detect wait states within the processes running and take the processors to a low power mode of operation when they are not performing actual work. Am I out in left field here?
I want Apple to be successful. I haven't heard of a similar complaint on any of the high performance PC's at work. Beyond a Health and Safety issue, this is also a reputation issue. Better to face into the storm and honestly deal with this issue.
A slightly crisp, but loyal, MacBook Pro user.
Mike Doherty
MacBook Pro Mac OS X (10.4.5) Potential Health and Safety Issue- 3rd degreee burn potential under normal use

Mike... I do sympathize with your situation but let me correct you:
I recently experienced a 3rd degree burn using my
MacBook Pro
Do you know what a 3rd degree burn is? A 3rd degree burn involves the dermis, and is full thickness involving the subcutaneous tissues and fat underneath your skin layers. This is something that usually happens when man meets fire, electrocution, and chemical burns. A 3rd degree burn is not typically achieved by a simple transfer of energy by conduction, unless extreme heat for an extended period of time.
I had my laptop on my lap. I was wearing shorts. It
noticed that it was warm on my leg where the left
side of the MacBook Pro was touching my leg, but it
didn't create a reflex pain response.
Reflex pain response? Don't try to make up medical terminology. You didn't feel it much like you don't feel the sun when you get a sunburn initially... your skin slowly adjusted to the temperature, and at some point the heat increased over the threshold of which causes damage. You should have gone to the doctor if you were overly concerned.
Upon completing my session, when I closed the machine
and put it away, I noticed a 1 inch x .75 inch
blister on my leg where it had been touching the
MacBook/Pro; and it has turn out to be a significant
burn.
You're right, if you have a 1inch by almost 1 inch heat related blister on your leg, it is bad, nothing that I would consider significant. That is less then 1% of your body, probably about 0.25% to 0.5%, and only a 2nd degree burn. Your most significant complication would be a local skin infection.
I checked all the documentaiton that came with my
MacBook Pro and there was no warning about the
potential of this situation.
Actually... I'd hate to call you a liar, but I'm pretty sure that it does warn about burns.
To confirm this, apple has also information online:
http://docs.info.apple.com/article.html?artnum=30612
I recommend that Apple let owners know, perhaps
through an email or a popup when they visit the Apple
site.
They do... link above.
Lastly, when I encountered this issue, I wasn't
running any high performance, compute bound
applications. It was email. So, I have to believe
that it is possible to detect wait states within the
processes running and take the processors to a low
power mode of operation when they are not performing
actual work. Am I out in left field here?
No, you're definitely not. Here's where I start to agree with you. For the computer to heat up that much, when not doing things like rendering video is abnormal, and you deserve to have apple check out your computer. I think you should contact them on this concern.
I want Apple to be successful. I haven't heard of a
similar complaint on any of the high performance PC's
at work. Beyond a Health and Safety issue, this is
also a reputation issue. Better to face into the
storm and honestly deal with this issue.
It's harder for other manufacturers... our computers are aluminum, designed to disperse the heat. Technically they are considered "portables" not laptops, but I don't get into that argument because I disagree with the word "portable"... it's meant to work on your lap, and if you can't comfortably using regular apps, you deserve an answer.
A slightly crisp, but loyal, MacBook Pro user.
Hey, at least you're taking it with some humor. It's a shame you had to get hurt as a result of your computer. If I were you I would have gone to your Primary Care Physician, documented the burn, and returned your computer for a new one, and for something say, a free iPod for your pain.
Sorry you got hurt, I think you should have your heat issue professionally investigated through apple care

Manager says he needs an SAP Environmental, Health, and Safety Person

Similar Messages

Maybe you are looking for