Manager Succession Planning: Display all reports

Hello,
We have configured the Succession Planning Manager application (TVN 2.1, java, Product Version: 6.0 Build Version: 6.00.003.00).
The application displays the positions reporting to the connected managers. We would like to give managers access to these positions + all positions underneath: N-1, N-2...N-x. We need therefore to be able to browse the org units beneath the manager's org unit. This would be similar to what is available for TMS in Succeession Planning application (they see everything underneath the org unit they are TMS for)
In the data connection (general settings) for My reports, we have:
Data Table BAPI_ReportingPosition_DataSet
Data Filter Type='S'
If I understand well, this is used to select the objects displayed in the view. Is there something else we can use in order to achieve our requirement?
Thanks,
Laurent

Thanks.
This menu was not active for English in IMG.
I see a config called "Specify Type of Reporting for Determining the Manager". Only one field, REPORTING_LINE, the value is "Indirect" which is the default value. the other option is direct but doesn't change a thing (seems to be specific to S-S-P)
Are you sure it is not an issue with the dataelement and the filter defined in the admin console?
Thanks,
Laurent

Similar Messages

Succession Planning Manger My Reports

Hi,
I am logging into Sucession Planning Manager for the first time and the "My Reports" view does not show witht he error message stating that it could not find my root org unit.
Is it checking that my user ID in the backend SAP system is a chief? Or should it use the root org unit that I have configured in the admin console for Succession Planning Manager. The root did work for our Org Chart solution.
thanks.
JB

Hi Jamie,
The Manager application looks for your reports based on US > P > S > O where the S to O is relationship 012 (chief). Then it looks for all positions/employees that are assigned to that orgunit.
So, in principle your user ID needs to be linked to an employee in a chief position. No root ID should be added to this orgchart in the AdminConsole.
I hope that helps!
Luke

Talent Management & Succession Planning

Hi
As part of the EHP4 functional upgrade of HCM core processes for Talent Management such as Succession Planning or talent development is getting switched on.
Any input on the impact it will have on existing BI reports on succession planning which is based on ehp3 data model.
(The latest talent Management and talent development BI content is available only in the release of EHP5 package)
Thanks & Regards
Venkat

Hi Dinu,
It sounds like a data issue. SP is probably reading the HRP1001 values but somewhere the data may have been corrupted or an object incorrectly deleted/unassigned. I would just delete the relationship in PP01 if not actual successor is assigned.
Kind regards,
Luke

Configuration Manager - How to display all config info?

Hi,
I noticed that the Configuration Manager doesn't display (and allow you to edit) all of the info in configuration.xml. For example, the openhttp proxy properties aren't listed. Is it possible to expose these through the Configuration Manager? This link (the lone comment at the bottom of the page) seems to indicate that it is indeed possible but offers no explanation:
[http://blogs.oracle.com/bbenac/2008/08/configuring_proxies_in_alui_co.html]
Thanks.

So I canu2019t do this, I canu2019t display all data on one page (until Iu2019m using JSF tags)?
In JSF tags Iu2019m setting only path to file. In my bean Iu2019m using u201CReportClientDocumentu201D object itu2019s easy way to load report file (u201Copenu201D method) and set parameters (u201CgetDataDefController().getParameterFieldController()u201D method) and also connect to data base (u201Clogonu201D method) but I havenu2019t this property u201CsetSeparatePages(boolean)u201D.
Maybe Iu2019m doing this wrong and there is a simpler way maybe I can use somehow u201CCrystalReportVieweru201D please give my any advice.

Error in 'My Reports' section for Manager-Succession Planning

Hi,
We are implementing Nakisa 3.0 SP1.
We have maintained all prequisites for a Manager. For example:
1) Manager's user id is attached to Employee who is managing Org. Unit
though relationship B012.
2) Configured Root Org. Unit in Administration Console.
Still, we are getting error like "Cannot find the root of your
orgchart. The orgchart box may have been deleted or incorrectly
specified, or no valid org structure can be found for the selected
effective date. Please change the root of the chart or select another
effective date."
I have checked log (cds.lg) as well. It's not giving any relevant
error. although it is giving error which says "04 Jul 2011 10:30:33
ERROR com.nakisa.Logger - java.text.ParseException: Unparseable
date: "7/10/2007 2:15:10 PM"".
Please Help!
Thanks,
Prashant

Hi Experts.
I have the same problem as Prashant, I cannot display the organizational structure in Nakisa Career Planning 3.0 CEP3 Build 703012000.
I have reviewed the followings links in SAP.
P to CP
A209
CP to BP
B207
FN to JF
B450
JF to C
B450
JF to Q
A031
FN to Q
A031
P to US IT0105
I ran the report HRALXSYNC and corrected errors.
Is returned to perform instance deploy and reapply the transport package.
For testing the user has SAP_ALL.
In the configuration of thea dmin console I have tried to address the Organizational ID and error occurs: "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date."
I tried to do what he says Luke Marson and the error persists.
In the log Manager I get the following error:
68. 05 Aug 2013 12:37:26 ERROR com.nakisa.Logger - java.text.ParseException: Unparseable date: "7/10/2007 2:15:10 PM".
Appreciate any comments to help me solve the problem.
Best regards.

Workgroup Manager doesn't show all group members

Hello,
Workgroup Manager does not display all members of certain a certain group I defined a while ago. I figured out that it is very likely that the group record is corrupt - or at least it is not interpreted the right way anymore.
What confused me are the different (Open Directory?) Attributes that could have to do with the problem:
dsAttrTypeStandard:GroupMembers
dsAttrTypeStandard:GroupMembership
dsAttrTypeStandard:Member
dsAttrTypeNative:memberUid
dsAttrTypeNative:apple-group-memberguid
I searched the UserManagement_Adminv10.4B.pdf for those keywords, but there is nothing in it. A Google search was of no help, either. Can someone help me with that?
Cheers,
Florian Schneider
PowerBook G4 Mac OS X (10.4.7) Server Admin Software 10.4.7
iBook G3 Mac OS X (10.4.6)

Exporting the user list does not export the group list, or any related user info. Including passwords.
The only sure way to export and import users and groups with any automation is by using the archive feature in the OpenDirecroty tab in server admin.
Do you still have the old 10.5 system? If so, run the archive.
On your new computer, demote the server to standalone. Then promote it to master.
Restore your archive on the 10.6 machine, and you should be back up and running.
HTH
-Graham

Succession Planning - German text displayed

Hi,
We are experiencing a problem where a German text appears in Career Type column for a position that is displayed on Nakisa screen. The text in the Postion Attribute though is in English.
This happens when slecting Positions ==> All Positions ==> then search for position using position title or position ID. Position ID, Title, Career Type, Career Level, etc columns are then displayed. The Career type text for a position where Career Type and Level values are captured are displayed in German. Can you advise how to fix this.
Succession Planning 2.0; Nakisa 2.1; SAP ECC 6.0, Service Pack 6.
egards,
Ike

Hi Ike,
Ah ha! Now I know the problem! I have correction instructions from SAP that I know are fixed in a later service package for SAP, but I haven't seen a SAP note released with the fix. This is from the OSS message:
there is an error in the Enterprise Search modelling which has been
corrected by support packages in the meantime.
In the technical template SUBTYP the field SUTXT in the node
T777U is not marked as text field. So the search does not know
that this field contains a language dependent text which has only
to be provided in the logon language.
The modeling in SAP-Standard has been corrected in the meantime
by support packages. You can correct the error in advance by
changing the technical template subtyp as indicated in the attached
picture: You only have to check the field "contains text".
For this you probably need to create your own software package and then include EA-HRGXX because some nodes in the standard software component cannot be changed.
Best regards,
Luke

ADS Credential Rights Issue. All reports checks successful...

I am having an ADS issue in my EP production environment. When users click on any adobe form, it gives 2 popup, stating
1) u201CThis document enabled extended feature in Adobe Reader. The use of the extended features has expiredu201D
2) u201CThis document enabled extended feature in Adobe Reader. The document has been changed since it was created and use of extended feature is no longer available. Please contact the author for the original version of this document.u201D
And it displays the below errors in the log.
Log location:--> /usr/sap/<SID>/JC00/j2ee/cluster/server0/log
1) com.adobe.ProcessingException: Required stream: "PDFDocument" not found in request OR its length is zero.
2) com.adobe.ProcessingException: Credential login error while applying usage rights to PDF: /var/tmp/adobewa_EPP_14070851/DM-4025786556068948812.dir/DM-6606423593397490494.tmp
Specific error information:
error while logging into credential '^0'
GeneralError: Operation failed.
SecurityHandler.login:-1:
Could not create temporary file
Troubleshooting Steps I have followed
Step 1: I observed the u201CCredential Keyu201D in Visual Admin got expired.
Action: I sent a request to SAP Market place to request a new credential key and got a new key.
Resolution: The credential key was applied to all server nodes, all required ADS service were restarted and u201CWASu201D was restarted.
Step 2: Ran reports (FP_TEST_00, FP_PDF_TEST_00, FP_CHECK_DESTINATION_SERVICE, and FP_TEST_IA_01)
Action: Ran reports in se38
Resolution: All reports were successful.
Step 3: Followed all instructions for the below links
Action: /people/dezso.pap/blog/2007/01/10/common-problems-with-sap-interactive-forms-by-adobe--part-i- --> (ADS troubleshooting issuses)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98 --> (Installing credentials and configuring ADS)
Resolution: Did not resolve my issues.
Step 4: Open a very high priority ticket with SAP.
Action: Sent SAP all the logs and screen shot of problems.
Resolution: None! SAP canu2019t figure out the problem.
Kindly assist me, if you have encountered this issue before. Your assistance is greatly appreciated.
Regards,
Haffiz

Hi Haffiz,
I have your same problem:
Credential login error while applying usage rights to PDF: C:\WINDOWS\Temp\adobewa_S19_197736650\DM-7159480439143838974.dir\DM-6724718864855579594.tmp
I just installed the credential
the FP_TEST_IA_01 failed at running
How you have resolved this problem?
Best Regards
T.Anderson

How can I display all results of a array element in a TS2.0 NumericArrayMeasurement in a single report line?

TestStand2.0 generates for each result property ( data, limits, status...) of each array element in a NumericArrayTest an extra line in the test report.
How can I change this to display all result properties of one array element in a single line?
How can I reduce the spaces between the property name and its value in the report?
How can I delete the message: "Measurement[x]" and display only the Measurement Alias (named in the Edit Limits menu)?
This means I like to change my report from:
Measurement[0] (ADC1):
Data: 5000
Status: Passed
Measurement[1] (AD
C2):
To:
ADC1: Data: 5000 Status: Passed
ADC2: ...

Hi,
What you can do, is use the Override Callbacks for Modify the Report that is Generated.
Also you can also change the report sequence 'reportgen_txt.seq' to achieve the desired affect. If you go for modifying the report sequence then copy this to the User folder and then make your changes.
In the Resources Library you can find simple examples were the report has been modified by either using the Override Callbacks or by modifying the actual sequence.
One other item in the Report Options you will have to set the 'Select a Report Generator for Producing the Report Body' control to use the Sequence instead of the DLL.
Hope this helps
Ray Farmer
Regards
Ray Farmer

A report to display all PO by vendor?

Hi,
Report me2L/me2m is to display open purchase order by vendor, Is there a report to display all PO(preferrably can select a time period, say since last year) by vendor?
Thanks,
Meg

Hello Meg,
ME2L is the best report in purchasing meeting all the requirement i.e. open purchase order, closed purchase order, pending invoice etc.
The output will be based on your "Selection parameters" so check which one is most appropriate selection parameter to meet your requirement.
Here you have time line selection also.
Hope this helps.
Regards
Arif Mansuri

Retrieve All records and display in Report using CAML query in Report Builder if Parameter value is blank

Hello Experts,
i have created a report where i have one parameter field where user will pass parameter(e.g. EmpId). As per parameter record will fetched to report if no parameter is passed then it will display all records. I have done it by taking SqlServer Database as datasource.
by using Following method
Now i would like to do it by taking Sharepoint List as Datasource. For that what would be the CAML Query.
Here is my existing CAML query.
<RSSharePointList xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ListName>Employees</ListName>
<ViewFields>
<FieldRef Name="Title" />
<FieldRef Name="FirstName" />
<FieldRef Name="LastName" />
<FieldRef Name="FullName" />
<FieldRef Name="UserName" />
<FieldRef Name="Company" />
</ViewFields>
<Query>
<Where>
<Eq>
<FieldRef Name="Title" />
<Value Type="Text">
<Parameter Name="EmployeeId"/>
</Value>
</Eq>
</Where>
</Query>
</RSSharePointList>
The above code is working if i am passing an employeeId to Parameter. If nothing is passed, it is Not retrieving any record.
Please suggest
Thank you
saroj
saroj

Your problem follows the well-established pattern of using an "All" parameter filter in SSRS. There are a few approaches depending on the size of your data. The easiest one is to return all data from CAML and then filter it within SSRS, the following thread
provides some examples,
http://stackoverflow.com/questions/18203317/show-all-records-some-records-based-on-parameter-value.
Other options include passing all of the possible values within the CAML query when "All" is selected, using multiple Report Files to distinguish between both CAML queries, or to use multiple datasets with some logic to show/hide the correct one.
Dimitri Ayrapetov (MCSE: SharePoint)

Display the reports under all subfolders at a time in the content area?

Hi All,
In SAP EP portal,We have a requirement to display few reports wherein we have 7 roles with the same names but different ID's and they are merged together so that even if the users have 7 roles assigned he will see only 1 tab in the first level navigation and uder that there will be one folder at the second level.Now the requirement is like this
1st level navigation : Role Name
2nd level navigation :Folder Name
Detailed Navigation : Folder Name
                                 Sub Folder Name
                                 Sub -sub folder1 Name
                                 Reports   --(one or many)
                                 Sub -sub folder2 Name
                                 Reports   --(one or many)
                                 Sub -sub folder3 Name
                                 Reports   --(one or many)
Under al the sub-sub folders a workset map iview is added to display the reports with a pictogram in the content area.In the detailed navigation, as soon as the user clicks on the Sub folder the user should be able to see the reports under all the Sub-sub folders( Sub-sub folder1,Sub-sub folder2,Sub-sub folder3) .But currently the user has to explicitly click on each of the Sub-sub folders to view the reports(thrice in this case).Plz give a solution in which all the reports under the 3 Sub-sub folders should appear simultaneouly in the content area at a single click on Sub Folder
Thanks & Regards,
Sowmya
Edited by: Sowmya B on Jan 4, 2010 2:14 PM

Resolved

How to display all rows in the report in one page in Oracle APEX 3.2

Friends -
We are using Oracle Applications Express 3.2 on oracle database 10.2.0.5 on solaris environment.
One of our report contains total no of rows 50000. when we ran report by default it is showing 15 and i can go search and change display no of rows to different numbers and click go.
My question is it possible to display all 50000 rows during first time report launching without going to change rows. Is there any option that we can set how many number of rows that we can display during report design.
Please advise
VSH

Hello VSH,
>> My question is it possible to display all 50000 rows during first time report launching without going to change rows
As vee pointed out it is possible, however the question you need to ask yourself is is it wise?
Bear in mind that displaying 50,000 rows on a single HTML page means a lot of code that must be loaded by the client browser all at once. What it will do to your page loading time? Browser memory? Network bandwidth? Also, do you really believe that it is effective to let an end user look for a specific row among 50,000 rows?
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

SSRS 2012 Report Manager web browser display issues

Hi Guys
I'm having a issue with the report manager display in explorer, Firefox and chrome web browsers, it doesn't display correctly, any advice would be greatly appreciated, thanks

go to your SSRS server and open your reporting server configuration Manager
Make sure that your Report Manager URL is
http://machinename:80/Reports and Web Service URL is
http://machinename:80/Reportserver
Roger

Report to display all the contacts of an opportunity.

Hello,
I have a requirement, can we create a report which displays all the contacts of an opportunity apart from primary contact.
Any inputs on the same will be appreciatable. TIA
Edited by: 1004233 on May 6, 2013 12:16 AM
Edited by: 1004233 on May 6, 2013 3:28 AM
Edited by: 1004233 on May 6, 2013 3:28 AM

Hey Aveek;
   Try this, which will get the most recent one. You would just need to change it to loop at the edids records to get at them all...
      TABLES: *edidc, *edids, *t100.
      DATA: wf_string type string.
      CLEAR *edids.
      SELECT SINGLE *
         INTO *edids
         FROM edids
         WHERE docnum = *edidc-docnum
           AND status = '51'.
      SELECT SINGLE text
         INTO *t100-text
         FROM t100
         WHERE sprsl = 'EN'
           AND arbgb = *edids-stamid
           AND msgnr = *edids-stamno.
         CLEAR wf_string.
      MOVE *edids-stapa1 TO wf_string.
      REPLACE '&' WITH wf_string INTO *t100-text.
      IF sy-subrc EQ 0.
        CLEAR wf_string.
        MOVE *edids-stapa2 TO wf_string.
        REPLACE '&' WITH wf_string INTO *t100-text.
        IF sy-subrc EQ 0.
          CLEAR wf_string.
          MOVE *edids-stapa3 TO wf_string.
          REPLACE '&' WITH wf_string INTO *t100-text.
          IF sy-subrc EQ 0.
            CLEAR wf_string.
            MOVE *edids-stapa4 TO wf_string.
            REPLACE '&' WITH wf_string INTO *t100-text.
          ENDIF.
        ENDIF.
      ENDIF.
      A little sloppy (OK, alot!), but it gets the job done...
Cheers,
John

Manager Succession Planning: Display all reports

Similar Messages

Maybe you are looking for