Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please advice

The Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Similar Messages

Exchange information store service is not starting on exchange 2010

i've run the updates on the exchange 2010 and restart the servers, after one week i've restart the 2003 dc and exchange 2010. now exchange information store service is not starting on exchange 2010 and the database are dismounted
help pls

I have just installed Exchange 2010 on my system and when trying to mount the database it fails. The Information Store service will not start on my server. Time is in sync with the DC and the initial install went fine. I have the following
from event viewer:
Cmdlet failed. Cmdlet Mount-Database, parameters {Identity=dellstslab}.
details
System
Provider
Name]
MSExchange
CmdletLogs
EventID
6
Qualifiers]
49152
Level
2
Task
1
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-02-18T16:43:34.000000000Z
EventRecordID
107
Channel
MSExchange
Management
Computer
Exchange2010.dellstslab.com
Security
EventData
Mount-Database
{Identity=dellstslab}
dellstslab.com/Users/Administrator
S-1-5-21-2431095704-2869583948-1116897492-500
S-1-5-21-2431095704-2869583948-1116897492-500
ServerRemoteHost-EMC
1412
14
00:00:01.1388073
View Entire Forest:
'True', Configuration Domain Controller: 'WIN-NVOVSE1R716.dellstslab.com',
Preferred Global Catalog: 'WIN-NVOVSE1R716.dellstslab.com', Preferred Domain
Controllers: '{ WIN-NVOVSE1R716.dellstslab.com }'
System.InvalidOperationException:
Couldn't mount the database that you specified. Specified database: dellstslab;
Error code: An Active Manager operation failed with a transient error. Please
retry the operation. Error: Database action failed with transient error. Error:
A transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 [Database:
dellstslab, Server: EXCHANGE2010.dellstslab.com]. --->
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException: An Active
Manager operation failed with a transient error. Please retry the operation.
Error: Database action failed with transient error. Error: A transient error
occurred during a database operation. Error: MapiExceptionNetworkError: Unable
to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Cluster.Replay.AmDbActionWrapperTransientException:
An Active Manager operation failed with a transient error. Please retry the
operation. Error: Database action failed with transient error. Error: A
transient error occurred during a database operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Exchange.Data.Storage.AmServerTransientException: An Active Manager
operation failed with a transient error. Please retry the operation. Error:
MapiExceptionNetworkError: Unable to make admin interface connection to server.
(hr=0x80040115, ec=-2147221227) Diagnostic context: ...... Lid: 12696 dwParam:
0x6D9 Msg: EEInfo: Generation Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam:
0x6D9 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x6D9 Msg:
EEInfo: Status: 1753 Lid: 9624 dwParam: 0x6D9 Msg: EEInfo: Detection location:
501 Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9
Msg: EEInfo: NumberOfParameters: 4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]:
Unicode string: ncalrpc Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode
string: Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662 Lid: 24060
StoreEc: 0x80040115 Lid: 23746 Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid:
27842 StoreEc: 0x80040115 Lid: 20866 Lid: 29058 StoreEc: 0x80040115 --->
Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to
make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context: ...... Lid: 12696 dwParam: 0x6D9 Msg: EEInfo: Generation
Time: 2014-02-18 16:43:34:389 Lid: 10648 dwParam: 0x6D9 Msg: EEInfo: Generating
component: 2 Lid: 14744 dwParam: 0x6D9 Msg: EEInfo: Status: 1753 Lid: 9624
dwParam: 0x6D9 Msg: EEInfo: Detection location: 501 Lid: 13720 dwParam: 0x6D9
Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters:
4 Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncalrpc Lid:
8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: Lid: 12952 dwParam:
0x6D9 Msg: EEInfo: prm[2]: Long val: -1988875570 Lid: 12952 dwParam: 0x6D9 Msg:
EEInfo: prm[3]: Long val: 382312662 Lid: 24060 StoreEc: 0x80040115 Lid: 23746
Lid: 31938 StoreEc: 0x80040115 Lid: 19650 Lid: 27842 StoreEc: 0x80040115 Lid:
20866 Lid: 29058 StoreEc: 0x80040115 at
Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult,
SafeExInterfaceHandle iUnknown, Exception innerException) at
Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain,
String password) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmStoreHelper.Mount(Guid mdbGuid,
MountFlags flags) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.<>c__DisplayClassb.<MountDatabaseDirect>b__2()
at
Microsoft.Exchange.Cluster.Replay.FailoverPerformanceTrackerBase`1.RunTimedOperation(TOpCode
opCode, Action operation) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabaseDirect(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags, AmDbActionCode
actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass19.<MountDatabaseDirect>b__18()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of inner exception stack
trace (Microsoft.Mapi.MapiExceptionNetworkError) --- --- End of stack trace on
server (Exchange2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunRpcOperationWithAuth(AmRpcOperationHint
rpcOperationHint, String serverName, String databaseName, NetworkCredential
networkCredential, Nullable`1 timeoutMs, InternalRpcOperation rpcOperation) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.MountDatabaseDirectEx(String
serverToRpc, Guid dbGuid, AmMountArg mountArg) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbAction.MountDatabaseDirect(AmServerName
serverName, AmServerName lastMountedServerName, Guid dbGuid, MountFlags
storeFlags, AmMountFlags amFlags, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbStandaloneAction.<>c__DisplayClass2.<MountInternal>b__0(Object
, EventArgs ) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmHelper.HandleKnownExceptions(EventHandler
ev) --- End of inner exception stack trace
(Microsoft.Exchange.Data.Storage.AmServerTransientException) --- at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmDbOperation.Wait(TimeSpan
timeout) at
Microsoft.Exchange.Cluster.ActiveManagerServer.ActiveManagerCore.MountDatabase(Guid
mdbGuid, MountFlags storeFlags, AmMountFlags amMountFlags,
DatabaseMountDialOverride mountDialOverride, AmDbActionCode actionCode) at
Microsoft.Exchange.Cluster.ActiveManagerServer.AmRpcServer.<>c__DisplayClass4.<MountDatabase>b__3()
at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.RunRpcServerOperation(String
databaseName, RpcServerOperation rpcOperation) --- End of stack trace on server
(EXCHANGE2010.dellstslab.com) --- at
Microsoft.Exchange.Data.Storage.Cluster.HaRpcExceptionWrapperBase`2.ClientRethrowIfFailed(String
databaseName, String serverName, RpcErrorExceptionInfo errorInfo) at
Microsoft.Exchange.Data.Storage.ActiveManager.AmRpcClientHelper.RunDatabaseRpcWithReferral(AmRpcOperationHint
rpcOperationHint, Database database, String targetServer, InternalRpcOperation
rpcOperation) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.RequestMount(MountFlags
storeMountFlags) at
Microsoft.Exchange.Management.SystemConfigurationTasks.MountDatabase.InternalProcessRecord()
The system attendant service does not start either. Any ideas?

Engine Service will not start - New Install

Trying to install NSM on a Windows 2008 r2 server and the Engine service will not start after the files are installed.
File Resource Manager is installed along with fully patched .NET 4.
Windows Logs give the below error before the service not starting failure.
Activation context generation failed for "C:\Program Files\Novell\Storage Manager\Engine\sqlite3.dll". Dependent Assembly Microsoft.VC90.CRT,processorArchitecture="amd64",p ublicKeyToken="1fc8b3b9a1e18e3b",type="win32",vers ion="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.

Fixed. I missed the .NET 3.5 requirement.

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Exchange Server 2013 installer will not start or complete

Hello,
I am trying to MS Exchange Server onto a Windows Server 2012R2 with Active Directory network. I had started an installation process and it shot out a list of pre-requisites that server need before it can attempt to install. I fulfilled every pre-requisite.
Rebooted the server. Now whenever I attempt another installation process again. It starts, gathers information, and quits with event log:
Windows Installer installed the product. Product Name: Microsoft Exchange Server. Product Version: 15.0.516.32. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MS Exchange Server is not listed in Programs and Features to even remove, is it a faulty Microsoft Installer? I have already rebooted numerous times to no avail.
EDIT: Here's a copy of the MSI log, I couldn't find anything to indicate what's going wrong myself, http://pastebin.com/LwCAimuF

Hi,
I've downloaded (as per instructions above):
Microsoft Exchange Server 2013 Service Pack 1 (SP1)
http://www.microsoft.com/en-us/download/details.aspx?id=41994
Again, the installer repeats the same behavior as before, right now I am running a repair tool on .Net repair tool.
New log http://pastebin.com/SDynMaDe
Edit: Looks like there's long list of issues trying to fulfill Exchange Pre Requisite.
Windows Management Framework 4.0
http://www.microsoft.com/en-us/download/details.aspx?id=40855
"The certificate for the signer of the message is invalid or not found"
It would probably be best to re-install Windows Server again

Exchange replication service not starting after installing Rollup update 3 v3

Hi,
I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
Event ID 4999:
Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
ErrorReportingEnabled: True
Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
Event ID 2060:
The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
Check the event logs to determine the cause.
Thanks
in Advance!!

I hope you are following the best practice to install rollup on DAG.
Suspend activation for the databases on the server being updated.
Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
Install the update rollup.
Resume activation for the databases on the updated server.
Perform database switchovers as needed.
http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
Thanks Uday Kiran,
Senior Consultant
Cyquent Technology Consultants, Dubai
Please Mark as answer if it helps you

Quicktime Streaming Server - qtss - service does not start in Server Admin.

Hi,
We're currently trying to configure a video/audio streaming server, but we've fallen at the first hurdle and the QuickTime Streaming service will not start (I am trying to enable it via Server Admin). Can anyone think of any possible reasons for this?
Many thanks,
Dave

It's probably not hugely relevant but are you trying to start it remotely or locally on the server? I know Server Admin can get a bit laggy and not always do what it should when starting services. Also can you check in the logs for the service (Quicktime Streaming>Logs>Error Log) to see if there's anything in there which gives and indication. Paste the output here if you need anymore help with that.
N.

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Error message:This IPHONE cannot be used because the Apple Mobile Device service is not started, after trying to upgrade to IOS5

Error message:This IPHONE cannot be used because the Apple Mobile Device service is not started. It is a 3GS version 4.3.5 (8L1). I had upgraded my ITUNES and after two attempts to update to IOS 5 (it timed out each time), I am now getting the message above. everything seems to be working. I have rebooted both computer and IPHONE. I am have had for couple of years. Anyone have other tips or ideas?

There are instructions on this page for how to start it and how to set it to start automatically : http://support.apple.com/kb/TS1567

CSA : Cluster not started after installing CSA 6.0.0.209

After installing CSA 6.0.0.209 on Win2003 Server,
the cluster service is not started.
The server said that the network connection service is not started.
The CSA is registered in the Management Center.
And the group is in LEARN MODE.
What is the source of this problem?

First off, do you get any events from that machine in the csamc ? If not, does it solve the problem if you disable csa and try to start the cluster service ? If so, then you could have a deny rule that has no log (even though that is highly unlikely if you are using the default policies) Also what clustering software are you using, microsoft or some other 3rd party sw ?
Jan

Windows 8.1 is not starting after installing Bluetooth driver

I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
It was perfect before installing RaLink Bluetooth Driver update.
I use "HP ENVY 15 Touchsmart j001tx" laptop.
Please have a look on this articles also:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
Further information:
HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
Sushovan Mukherjee

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

11.1.2 opmn_EPM_epmsystem1 service will not start after server move

Moved our 11.1.2 Windows 2008 SP2 (not R2) 64 bit machines from one domain to the other (test to prod) and reconfigured the repositories to the prod SQL server (2005). Configuration is all green yet the EPM_epmsystem1 will not go to started. It sticks at Starting and after some type of time out stops.
We run as administrator thinking that would be the problem but to no avail. We tried the delivered script but to no avail either.
In the E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\OPMN\opmn directory the opmn.log shows only this:
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][90][OPMN]ONS server initiated
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][522][OPMN][code:pm-internal]PM state directory exists: E:\Oracle\Middleware\user_projects\epmsystem1\config\OPMN\opmn\states
[2011-01-19T14:48:44][opmn][NOTIFICATION:1][675][OPMN][code:pm-internal]OPMN server ready. Request handling enabled.
[2011-01-19T14:48:44][opmn][ERROR:1][17][OPMN][code:ons-listener]172.16.10.31,6712: BIND (Unknown error)
Looking for avenues on how to resolve this ...
JTS

Hi John,
I still get the same error message when i start the opmn from the command prompt.
[2011-01-20T08:17:28][opmn][NOTIFICATION:1][675][OPMN]OPMN server ready. Request handling enabled.
[2011-01-20T08:17:28][opmn][ERROR:1][17][OPMN][code:ons-listener]10.177.63.163,6712: BIND (Unknown error)
Its a VM Image and i havent sent any ipaddress in the host file too.
however i am unable to start the OPMN (epmsystem1) service too from services.msc and it throw below error
Could not start the Oracle Process Manager (EPM_epmsystem1) service on a Local Computer.
Error 1053: The server did not respond to the start or controle request in a timely fashion.
Please help i am unable to start essbase from any of them

Indesign Server CS4 service is not starting on Windows Server 2003 64bit

Hello guys,
I am not able to start Indesign Server CS4 service on windows Server 2003 SP2 64bit .
I have successfuly configured the service with InDesignServerService.msc, set the port to 18555. InDesignServerWinService the Log On option is set to "This Account". Also tried using different accounts!
When starting the indesign service from windows Service control panel I get this error:
Could not start the InDesignServerService x64 service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
Error log from windows Event viewer:
Error
Timeout (30000 milliseconds) waiting for the InDesignServerService x64 service to connect.
Indesign server application works if launching from command line with the specified port 18555.
If trying to lauch IndesignServerService.exe from command line, there is a delay and finally nothing happens.
I have also tried launching 32bit indesign server service and the same error comes.
Would be grateful for your thoughts!
Message was edited by: Andrewdev
Server specs:
Windows Server 2003
Standard x64 Edition
Service Pack 2
Intel Xeon CPU 3.00Ghz
9.76 GB of Ram
Server is running virtualy on Xen hypervisor, there is no antivirus and windows firewall is disabled.

Hi Chandi,
      If Microsoft fix is not working or it is too old to apply then go for manual process i.e.;
      In the Microsoft KB article follow this :-
     Services that use the local system account to log on to a Windows Server 2003-based computer start if the Allow service to interact with desktop
     option is turned on. To turn this option on, follow these steps:
In the Services tool, click the service that you want to start, and then click Properties.
Right-click the Log On tab, and then click to select the Allow service to interact with desktop check box.
Click OK to exit the Properties dialog box.
   This will solve your problem.
   Thanks,
   Akansh Upadhyaya,
   System Engineer,
   (Windows + Unix.)

Oracle application server 10.1.3 not starting after crash

Hi, I've been struggling with starting up application server 10.1.3 on Windows XP Professional SP2 following a system crash (power outage). When we restarted the machine we noted that the database wasn't coming up because our redo logs were full. We backed up the database with RMAN (freeing the logs) and the database started without a problem.
We then tried to log into application server control from the website but were faced with a connection error. It is definitely the correct page as it was bookmarked on the server. I cannot start application server from the command line using opmnctl. Here is the output:
C:\product\10.1.3\OracleAS_1\opmn\bin>opmnctl status
Processes in Instance: appserv.MSRSFR
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
OC4J | home | N/A | Down
ASG | ASG | N/A | Down
C:\product\10.1.3\OracleAS_1\opmn\bin>echo %time%
11:32:13.78
C:\product\10.1.3\OracleAS_1\opmn\bin>opmnctl startall
opmnctl: starting opmn and all managed processes...
==================================================
opmn id=msrsfr:6200
0 of 1 processes started.
ias-instance id=appserv.MSRSFR
++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1339952132,pid=2136)
failed to start a managed process after the maximum retry limit
Log:
C:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
C:\product\10.1.3\OracleAS_1\opmn\bin>echo %time%
11:32:39.12
C:\product\10.1.3\OracleAS_1\opmn\logs\OC4J~home~default_group~1
07/12/30 11:32:22 Start process
07/12/30 11:32:24 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Could not read connectors file at file:/C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: ./oc4j-connectors.xml
07/12/30 11:32:24 Fatal error: server exiting
07/12/30 11:32:26 Start process
07/12/30 11:32:28 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Could not read connectors file at file:/C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: ./oc4j-connectors.xml
07/12/30 11:32:28 Fatal error: server exiting
07/12/30 11:32:30 Start process
07/12/30 11:32:32 Error initializing server: Error instantiating default application at Unable to get ApplicationConfig for default : Could not read connectors file at file:/C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: ./oc4j-connectors.xml
07/12/30 11:32:32 Fatal error: server exiting
C:/product/10.1.3/OracleAS_1/j2ee/home/config/oc4j-connectors.xml: Notice the /'s versus standard windows \'s. The actual file is empty (contains only blank spaces).
I'm not sure where to go from here, I've tried stopping the oracle services manually and starting them up in various orders. We have the following services running:
Oracle-appservProcessManager Started
OracleDBConsoleTSTONE Started
OracleJobSchedulerTSTONE Disabled
OracleOraDb10g_home1iSQL*Plus Started
OracleOraDb10g_home1TNSListener Started
OracleServiceTSTONE Started
I'm sort of at a loss for where to go from here, help would be much appreciated!
Thanks,
Reza

Here you have it.
<?xml version="1.0" standalone='yes'?>
<oc4j-connectors xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNam
espaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/oc4j-connectors-10
_0.xsd" schema-major-version="10" schema-minor-version="0" >
<connector name="datasources" path="datasources.rar">
</connector>
<connector name="OracleASjms" path="OracleASjms.rar">
<config-property name="lookupMethod" value="resourceProvider"/>
<config-property name="resourceProviderName" value="oc4jjms"/>
<adminobject-config location="OracleASjms/Queues">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tQueueImpl</adminobject-class>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
<adminobject-config location="OracleASjms/MyQueue1">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tQueueImpl</adminobject-class>
<config-property name="jndiName" value="jms/demoQueue"/>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
<adminobject-config location="OracleASjms/Topics">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tTopicImpl</adminobject-class>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
<adminobject-config location="OracleASjms/MyTopic1">
<adminobject-class>oracle.j2ee.ra.jms.generic.AdminObjec
tTopicImpl</adminobject-class>
<config-property name="jndiName" value="jms/demoTopic"/>
<config-property name="resourceProviderName" value="oc4j
jms"/>
</adminobject-config>
</connector>
</oc4j-connectors>

Manages Exchange server health Service is NOT starting after installing EDGE role using Exchange2013 SP1+CU5 setup

Similar Messages

Maybe you are looking for